Public procurement opportunity for Indian Army Cement bag 43 grade OPC in polythene bags weighing 50 Kgs, Sand Coarse, Hard core of broken stone aggregate of size 45 to 63 mm, Crushed stone aggregate 20 mm graded, Pre cast ACC Blocks type C1 1 ratio 3 ratio 6 using 20 mm aggregate of size 0 point 40 x 0 point 20 x 0 point 20 Mtr, 5mm thick MS Sheet, Angle Iron 65 x 65 X 6 mm, FRP Tanks 2 X 6000 Ltrs capacity for each asset Rotational moulded FRP underground Water storage tank, Columns Square Hollow Steel SHS sections of size 80mm x 80mm x 4mm and 2800 mm long, Trusses including gable end trusses shall be provided using Rectangular Hollow Sections RHS of size 50mm x 25mm x 4mm and 2400mm long, Purlins Rectangular Hollow Steel RHS section of 50mm x 25mm x 4mm and 6800 mm long purlins provided on the trusses, Side Bracings 03 Nos of side bracing shall be made using rectangular hollow steel section of Size 60 x 40 x 3mm and 3400 mm long as a horizontal support, Roof Sheet 0 point 60 mm thick Pre Painted Galvalume roof sheet in approved colour should be provided for roof and to cover one side of temp shed, MS sheet of 5 mm thick to cover surface of tank and making 1M X 1M opening cover of UG FRP water tank, Angle Iron of size 65 x 65 x 6mm for making a frame for fixing of MS Cover on the UG Tank and opening of UG FRP water tank and horizontal beam support to MS plate, MS handle of size 450 long and 50 mm thick 4 Nos per cover welded with the MS sheet for opening of tank cover, MS Hinges should be provided and fixed with MS sheet and angle iron frame, MLC Pipe Multi Layer Composite pipes triple layer PE AL PE shall have an Inner dia 25 to 32 mm in 100m roll with equal union, Supply of HDPE water tank 500 Ltr Triple Layer, Self Tapping Screw 4 inch, Self Tapping Screw 3 inch, Pan motor Tasala 18 inch dia, Showel with wooden handle, Wire mess for seving Sand 8 x 5 feet, Trowels as per ISI Mark, Water level pipe 4mm and 15 Mtr long, Sprit level, Plum bob steel, Nylon mason thread 100 Mtr long, Measuring tape 05 Mtr retractable grade AI 16, Safety Helmet, Gum boot, Hand gloves rubber, Drilling machine portable, Steel cutter circular saw, Cutting blade 4 feet steel, Cutting blade 14 feet steel, Hexa blade 350 mm long ISI 1st Quality, Axes picks 03 Kg head with handle, Welding rod, Welding goggles, Welding gloves in PITHORAGARH, UTTARAKHAND. Quantity: 5793 issued by. Submission Deadline: 19-07-2025 12: 00: 00. View full details and respond.
Procurement Opportunity: Cement bag 43 grade OPC in polythene bags weighing 50 Kgs,Sand Coarse,Hard core of broken stone agg in PITHORAGARH, UTTARAKHAND
Posted
28 Jun 2025, 11:37 am
Deadline
19 Jul 2025, 12:00 pm
EMD
₹1,14,000
Location
Progress
Quantity
5793
Category
Cement bag 43 grade OPC in polythene bags weighing 50 Kgs
Bid Type
Two Packet Bid
Categories
33
Bill of Quantities (BOQ)
42 Items
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Cement bag 43 grade OPC in polythene bags weighing 50 Kgs | Cement bag 43 grade OPC in polythene bags weighing 50 Kgs as per specifications and store list and drawings mentioned in technical specification document | 144 | bags | 71122n | 60 |
| 2 | Sand Coarse | Sand Coarse as per specifications and store list and drawings mentioned in technical specification document | 33 | cum | 71122n | 60 |
| 3 | Hard core of broken stone aggregate of size 45 to 63 mm | Hard core of broken stone aggregate of size 45 to 63 mm as per specifications and store list and drawings mentioned in technical specification document | 12 | cum | 71122n | 60 |
| 4 | Crushed stone aggregate 20 mm graded | Crushed stone aggregate 20 mm graded as per specifications and store list and drawings mentioned in technical specification document | 12 | cum | 71122n | 60 |
| 5 | Pre cast ACC Blocks type C1 1 ratio 3 ratio 6 using 20 mm aggregate of size 0 point 40 x 0 point 20 x 0 point 20 Mtr | Pre cast ACC Blocks type C1 1 ratio 3 ratio 6 using 20 mm aggregate of size 0 point 40 x 0 point 20 x 0 point 20 Mtr as per specifications and store list and drawings mentioned in technical specification document | 3,300 | nos | 71122n | 60 |
| 6 | 5mm thick MS Sheet | 5mm thick MS Sheet as per specifications and store list and drawings mentioned in technical specification document | 40 | sqm | 71122n | 60 |
| 7 | Angle Iron 65 x 65 X 6 mm | Angle Iron 65 x 65 X 6 mm as per specifications and store list and drawings mentioned in technical specification document | 696 | kg | 71122n | 60 |
| 8 | FRP Tanks 2 X 6000 Ltrs capacity for each asset Rotational moulded FRP underground Water storage tank | FRP Tanks 2 X 6000 Ltrs capacity for each asset Rotational moulded FRP underground Water storage tank as per specifications and store list and drawings mentioned in technical specification document | 6 | nos | 71122n | 60 |
| 9 | Columns Square Hollow Steel SHS sections of size 80mm x 80mm x 4mm and 2800 mm long | Columns Square Hollow Steel SHS sections of size 80mm x 80mm x 4mm and 2800 mm long as per specifications and store list and drawings mentioned in technical specification document | 18 | nos | 71122n | 60 |
| 10 | Trusses including gable end trusses shall be provided using Rectangular Hollow Sections RHS of size 50mm x 25mm x 4mm and 2400mm long | Trusses including gable end trusses shall be provided using Rectangular Hollow Sections RHS of size 50mm x 25mm x 4mm and 2400mm long as per specifications and store list and drawings mentioned in technical specification document | 9 | set | 71122n | 60 |
| 11 | Purlins Rectangular Hollow Steel RHS section of 50mm x 25mm x 4mm and 6800 mm long purlins provided on the trusses | Purlins Rectangular Hollow Steel RHS section of 50mm x 25mm x 4mm and 6800 mm long purlins provided on the trusses as per specifications and store list and drawings mentioned in technical specification document | 12 | nos | 71122n | 60 |
| 12 | Side Bracings 03 Nos of side bracing shall be made using rectangular hollow steel section of Size 60 x 40 x 3mm and 3400 mm long as a horizontal support | Side Bracings 03 Nos of side bracing shall be made using rectangular hollow steel section of Size 60 x 40 x 3mm and 3400 mm long as a horizontal support as per specifications and store list and drawings mentioned in technical specification document | 18 | nos | 71122n | 60 |
| 13 | Roof Sheet 0 point 60 mm thick Pre Painted Galvalume roof sheet in approved colour should be provided for roof and to cover one side of temp shed | Roof Sheet 0 point 60 mm thick Pre Painted Galvalume roof sheet in approved colour should be provided for roof and to cover one side of temp shed as per specifications and store list and drawings mentioned in technical specification document | 3 | set | 71122n | 60 |
| 14 | MS sheet of 5 mm thick to cover surface of tank and making 1M X 1M opening cover of UG FRP water tank | MS sheet of 5 mm thick to cover surface of tank and making 1M X 1M opening cover of UG FRP water tank as per specifications and store list and drawings mentioned in technical specification document | 6 | set | 71122n | 60 |
| 15 | Angle Iron of size 65 x 65 x 6mm for making a frame for fixing of MS Cover on the UG Tank and opening of UG FRP water tank and horizontal beam support to MS plate | Angle Iron of size 65 x 65 x 6mm for making a frame for fixing of MS Cover on the UG Tank and opening of UG FRP water tank and horizontal beam support to MS plate as per specifications and store list and drawings mentioned in technical specification document | 696 | kg | 71122n | 60 |
| 16 | MS handle of size 450 long and 50 mm thick 4 Nos per cover welded with the MS sheet for opening of tank cover | MS handle of size 450 long and 50 mm thick 4 Nos per cover welded with the MS sheet for opening of tank cover as per specifications and store list and drawings mentioned in technical specification document | 24 | nos | 71122n | 60 |
| 17 | MS Hinges should be provided and fixed with MS sheet and angle iron frame | MS Hinges should be provided and fixed with MS sheet and angle iron frame as per specifications and store list and drawings mentioned in technical specification document | 18 | nos | 71122n | 60 |
| 18 | MLC Pipe Multi Layer Composite pipes triple layer PE AL PE shall have an Inner dia 25 to 32 mm in 100m roll with equal union | MLC Pipe Multi Layer Composite pipes triple layer PE AL PE shall have an Inner dia 25 to 32 mm in 100m roll with equal union as per specifications and store list and drawings mentioned in technical specification document | 3 | roll | 71122n | 60 |
| 19 | Supply of HDPE water tank 500 Ltr Triple Layer | Supply of HDPE water tank 500 Ltr Triple Layer as per specifications and store list and drawings mentioned in technical specification document | 6 | nos | 71122n | 60 |
| 20 | Self Tapping Screw 4 inch | Self Tapping Screw 4 inch as per specifications and store list and drawings mentioned in technical specification document | 300 | nos | 71122n | 60 |
| 21 | Self Tapping Screw 3 inch | Self Tapping Screw 3 inch as per specifications and store list and drawings mentioned in technical specification document | 300 | nos | 71122n | 60 |
| 22 | Pan motor Tasala 18 inch dia | Pan motor Tasala 18 inch dia as per specifications and store list and drawings mentioned in technical specification document | 4 | nos | 71122n | 60 |
| 23 | Showel with wooden handle | Showel with wooden handle as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
| 24 | Wire mess for seving Sand 8 x 5 feet | Wire mess for seving Sand 8 x 5 feet as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
| 25 | Trowels as per ISI Mark | Trowels as per ISI Mark as per specifications and store list and drawings mentioned in technical specification document | 3 | nos | 71122n | 60 |
| 26 | Water level pipe 4mm and 15 Mtr long | Water level pipe 4mm and 15 Mtr long as per specifications and store list and drawings mentioned in technical specification document | 2 | nos | 71122n | 60 |
| 27 | Sprit level | Sprit level as per specifications and store list and drawings mentioned in technical specification document | 2 | nos | 71122n | 60 |
| 28 | Plum bob steel | Plum bob steel as per specifications and store list and drawings mentioned in technical specification document | 2 | nos | 71122n | 60 |
| 29 | Nylon mason thread 100 Mtr long | Nylon mason thread 100 Mtr long as per specifications and store list and drawings mentioned in technical specification document | 5 | roll | 71122n | 60 |
| 30 | Measuring tape 05 Mtr retractable grade AI 16 | Measuring tape 05 Mtr retractable grade AI 16 as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
| 31 | Safety Helmet | Safety Helmet as per specifications and store list and drawings mentioned in technical specification document | 10 | nos | 71122n | 60 |
| 32 | Gum boot | Gum boot as per specifications and store list and drawings mentioned in technical specification document | 4 | pair | 71122n | 60 |
| 33 | Hand gloves rubber | Hand gloves rubber as per specifications and store list and drawings mentioned in technical specification document | 55 | pair | 71122n | 60 |
| 34 | Drilling machine portable | Drilling machine portable as per specifications and store list and drawings mentioned in technical specification document | 1 | nos | 71122n | 60 |
| 35 | Steel cutter circular saw | Steel cutter circular saw as per specifications and store list and drawings mentioned in technical specification document | 1 | nos | 71122n | 60 |
| 36 | Cutting blade 4 feet steel | Cutting blade 4 feet steel as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
| 37 | Cutting blade 14 feet steel | Cutting blade 14 feet steel as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
| 38 | Hexa blade 350 mm long ISI 1st Quality | Hexa blade 350 mm long ISI 1st Quality as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
| 39 | Axes picks 03 Kg head with handle | Axes picks 03 Kg head with handle as per specifications and store list and drawings mentioned in technical specification document | 3 | nos | 71122n | 60 |
| 40 | Welding rod | Welding rod as per specifications and store list and drawings mentioned in technical specification document | 5 | pkt | 71122n | 60 |
| 41 | Welding goggles | Welding goggles as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
| 42 | Welding gloves | Welding gloves as per specifications and store list and drawings mentioned in technical specification document | 5 | nos | 71122n | 60 |
AI-Powered Bidder Prediction
Companies most likely to bid
Unlock Bidder Insights
AI predictions on likely bidders
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Download FREE!
Access all tender documents at no cost
Documents 5
GeM-Bidding-8022148.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
GeM-Bidding-8022148.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS