GEM

Bids are Invited For LED Flood Light powder coated pressure die cast aluminum System lumen efficacy not less than 135 lm in MUMBAI, MAHARASHTRA

Posted

08 Sept 2025, 07:23 pm

Deadline

06 Oct 2025, 08:00 pm

EMD

₹22,800

Value

₹11,39,226

Location

MUMBAI , MAHARASHTRA

Latest Corrigendum Available

Progress

Issue08 Sept 2025, 07:23 pm
Technical10 May 2025, 02:20 pm
Financial
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

1700

Category

Street Light

Bid Type

Two Packet Bid

Categories 21

MODULAR SWITCH XLPE CABLE CONDUCTOR ELECTRICAL PRODUCTS SOCKET ALUMINIUM LADDER PVC CABLE SHIELDED CABLE BOX ANGLE PEB CABLE SUPPLY TRANSITION METALS ALUMINUM CABLE INSTRUMENTATION CABLE BRACKET HDPE PIPE LED LIGHT FLEXIBLE CABLE POWER CABLE

A tender has been published for Directorate General Of Lighthouses And Lightships LED Flood Light powder coated pressure die cast aluminum System lumen efficacy not less than 135 lm per Watt, FRLS PVC insulated copper conductor single core cable, Modular Surface Box with modular base and cover plate, Modular Switch, Modular Socket outlet, PVC cassing capping, Angle holder, Ceiling Rose, Alluminium Bulkhead Light, Installation charges, Laying charges, Erection and Foundation, Street Light, Post Top Light for Compound wall, Post Top Light for 02Nos Gate, Bollard Light, Armoured cable, Flexible cable, Aluminium Ladder, Tubelight, FRP Junction box, Octogonal pole, Single Arm bracket, Dismanteling and Installation charges, HDPE pipe, Modular MCB, Adaptor in MUMBAI, MAHARASHTRA. Quantity: 1700 by. Submission Deadline: 06-10-2025 20: 00: 00. Check eligibility and apply.

Bill of Quantities (BOQ) 35 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 LED Flood Light powder coated pressure die cast aluminum System lumen efficacy not less than 135 lm per Watt Supplying, installation, Testing and Commissioning of 70W multi color Flood Light, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency more than 85%,Input voltage 140 to 270 Volt AC, freq 50 hz, Operating temp range 15 deg to 50 deg centigrade, internal surge protection of 5 KV L N E as per IEC 61000-4-5, Driver efficiency more than 85%,THD less than 10% as per IEC 61000-3-2 , P.F 0.95, IP-66, IK-10, CRI more than 80 , under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg to 120 deg as per the application and the project requirement deg, suitable tiltable fitting, life time (LED,Driver and electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect connections with 1.5 sq mm FRLS, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy more than 135 lm per Watt output . LM79 and LM80 Test report from NABL lab for all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. Thermal management heat sink of aluminum housing such that LED junction temperature shall not rise above 90 degree C 5 each shyamnandanverma2008 30
2 FRLS PVC insulated copper conductor single core cable Supplying and drawing of 2 x 1.5 sq mm FRLS PVC insulated copper conductor single core cable in the existing pvc conduit or cassing capping as required 155 rm shyamnandanverma2008 30
3 FRLS PVC insulated copper conductor single core cable Supplying and drawing of 3 x 1.5 sq mm FRLS PVC insulated copper conductor single core cable in the existing cassing capping or conduit as required 100 rm shyamnandanverma2008 30
4 FRLS PVC insulated copper conductor single core cable Supplying and drawing of 3 x 2.5 sq mm FRLS PVC insulated copper conductor single core cable in the existing cassing capping or conduit as required 96 rm shyamnandanverma2008 30
5 Modular Surface Box with modular base and cover plate Supplying and fixing of 3 module surface box along with modular base and cover plate for modular switches in surface etc as required 1 each shyamnandanverma2008 30
6 Modular Surface Box with modular base and cover plate Supplying and fixing of 6 module surface box along with modular base and cover plate for modular switches in surface etc as required 3 each shyamnandanverma2008 30
7 Modular Surface Box with modular base and cover plate Supplying and fixing of 8 module surface box along with modular base and cover plate for modular switches in surface etc as required 1 each shyamnandanverma2008 30
8 Modular Surface Box with modular base and cover plate Supplying and fixing of 12 modular surface box along with modular base and cover plate for modular switches in surface etc as required 4 each shyamnandanverma2008 30
9 Modular Switch Supplying and fixing of 5A or 6 A Modular Switch on the existing modular plate and switch box including connections but excluding modular plate etc as required 33 each shyamnandanverma2008 30
10 Modular Switch Supplying and fixing of 15A or 16 A Modular Switch on the existing modular plate and switch box including connections but excluding modular plate etc as required 3 each shyamnandanverma2008 30
11 Modular Socket outlet Supplying and fixing of 3 pin 5A or 6 A Socket outlet on the existing modular plate and switch box including connections but excluding modular plate etc as required 5 each shyamnandanverma2008 30
12 Modular Socket outlet Supplying and fixing of 6 pin 15A or 16 A Socket outlet on the existing modular plate and switch box including connections but excluding modular plate etc as required 3 each shyamnandanverma2008 30
13 PVC cassing capping Supplying and fixing of 25 mm sizes of PVC cassing capping along with accessories in surface and making good the same as required. 141 rm shyamnandanverma2008 30
14 Angle holder Supplying and fixing brass Angle holder including connection etc. as required. 3 each shyamnandanverma2008 30
15 Ceiling Rose Supplying and fixing 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 8 each shyamnandanverma2008 30
16 Alluminium Bulkhead Light Supply,Installation, Testing and Commissioning of wall bracket or ceiling fitting of Alluminium Bulkhead Light complete with all accessories including connections etc. as required fitting must by carried out on wooden patia 1 each shyamnandanverma2008 30
17 Installation charges Installation, Testing and Commissioning of Pre-wired,fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/wall, including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 26 each shyamnandanverma2008 30
18 Laying charges Laying of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of cable direct in ground including excavation, sand cushioning, protective covering with bricks and refilling the trench etc without damaging paver blocks as required. 400 rm shyamnandanverma2008 30
19 Erection and Foundation Erection of Street Lights pole, Garden Light pole with cement concrete 1 cement ratio 3 coarse sand ratio 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling etcas required with J bolt 22 each shyamnandanverma2008 30
20 Street Light Supply of SMD Type 60W LED Street Light with AC power factor at full load 0.90,The luminaire protected against surges and transients, Internal - Minimum 4KV,Efficiency not less than 85%, IP66 rating Protection. 12 each shyamnandanverma2008 30
21 Post Top Light for Compound wall Supply of SMD type 30W 230V LED Post Top Light for Compound Pillar with IP 66 Rating,Alluminium Die Casting housing , AC Power Factor at full load Minimum 0.90 including cage or mesh type protection from stones,treee branches 17 each shyamnandanverma2008 30
22 Post Top Light for 02Nos Gate Supply of SMD type 60W 230V LED Post Top Light for Gate Pillar with IP 65 or 66 Rating,Alluminium Die Casting housing ,AC Power Factor at full load Minimum 0.90. 4 each shyamnandanverma2008 30
23 Bollard Light Supply of SMD type 10W 230V LED Bollard Warm Light with Height-750mm,Pole Material-Alluminium Casting,IP 65 or 66, AC Power Factor more than 0.95, SMD LED Chip including cage or mesh type protection from stones,treee branches 10 each shyamnandanverma2008 30
24 Armoured cable Supply of power cable 3C/2.5 sqmm,1.1 KV grade, FRLS, multistranded copper conductor, XLPE armoured cable. 285 mtr shyamnandanverma2008 30
25 Flexible cable Supply of power cable 3C/2.5 sqmm, FRLS, multistranded copper conductor, Flexible cable. 120 mtr shyamnandanverma2008 30
26 Armoured cable Supply of power cable 4C/4 sqmm,1.1 KV grade, FRLS, multistranded copper conductor, XLPE armoured cable. 115 mtr shyamnandanverma2008 30
27 Aluminium Ladder Supply of 15/16 Ft Both side Step Alluminium Ladder of any reputed brand. 1 each shyamnandanverma2008 30
28 Tubelight Supply of LED Tube light fitting 20 W/230 V, 4 ft in white colour etc 2 each shyamnandanverma2008 30
29 FRP Junction box Supply of Heavy duty FRP Junction Box with termination connector,kitkat fuse, IP66 Protection,Wall Mounted. 24 each shyamnandanverma2008 30
30 Octogonal pole Providing approved make 5 Mtr. Long 70 mm Top X 130 mm bottom dia octagonal poles. Made from CR sheet steel. The pole should be made as per ISI. and shall be coated with hot dip galvanizing as per IS 2629/4759. with termination,MCB and required base plate suitable for suspend local wind speed to be erected on existing foundation. 12 each shyamnandanverma2008 30
31 Single Arm bracket Providing street light pole bracket comprising main C Class MS tube of 4.2 cms. outside dia. complete with suitable M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5mm or 80 mm or require size pole top having sufficient fastners for fixing the brackets and having suitable rise as per site condition as directed and spread of 1 mtr with suitable welded stiffener reducer and with lock nut complete painted with one coat of Red oxide and PU base primer and two coats of Aluminium and PU Paint.Suitable for side entry fitting brackets of Single arm. 12 each shyamnandanverma2008 30
32 Dismanteling and Installation charges Removal of old street lights with poles,Flood Lights, Gate Post Top Light and Compound Post Top Light and Installation of octagonal poles, Bollard Light and Gate & Compound Light with FRP Junction box and suitable bolts and nuts on existing foundation. 1 job shyamnandanverma2008 30
33 HDPE pipe Supplying and embendding of 40mm to 63mm dia GI pipe /HDPE pipe in pole coller/foundation (during casting) for cable entry for all lights including bending the pipe to the required shape complete as required. 70 mtr shyamnandanverma2008 30
34 Modular MCB Supply and Fixing of 25A Modular SP MCB on existing modular plate including connections etc. 2 each shyamnandanverma2008 30
35 Adaptor Supply and Fixing of 5A/230V Holder Adaptor 3 each shyamnandanverma2008 30

AI-Powered Bidder Prediction

Companies most likely to bid

Unlock Bidder Insights

AI predictions on likely bidders

Required Documents

1

Experience Criteria

2

Past Performance

3

Bidder Turnover

4

Certificate (Requested in ATC)

5

Additional Doc 1 (Requested in ATC)

6

Additional Doc 2 (Requested in ATC)

7

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

8

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Corrigendum Updates

1 Update
#1

Update

29 Sept 2025

Extended Deadline

06 Oct 2025, 08:00 pm

Opening Date

06 Oct 2025, 08:30 pm

Technical Results

S.No Seller Item Date Status
1NARROW PATH SOLUTIONS PRIVATE LIMITED   Under PMA-05-10-2025 14:20:31Disqualified
2RADHA ELECTRICALS   Under PMA-06-10-2025 19:16:06Qualified
3RAMESH ELECTRICAL & MECHANICAL WORKS   Under PMA-06-10-2025 11:02:04Qualified
4SANLEC AUTOMATION PRIVATE LIMITED   Under PMA-26-09-2025 16:00:34Qualified
5SP MIND ENGINEERING   Under PMA-28-09-2025 13:26:19Qualified
6SUDEEP ENGINEERS   Under PMA-03-10-2025 17:19:08Disqualified

Financial Results

Rank Seller Price Item
L1SP MIND ENGINEERING(MSE,MII)( MSE Social Category:General )    Under PMA₹9,12,142Item Categories : LED Flood Light powder coated pressure die cast aluminum System lumen efficacy not less than 135 lm
L2SANLEC AUTOMATION PRIVATE LIMITED (MSE,MII)( MSE Social Category:General )    Under PMA₹9,87,118Item Categories : LED Flood Light powder coated pressure die cast aluminum System lumen efficacy not less than 135 lm
L3RADHA ELECTRICALS (MSE,MII)( MSE Social Category:General )    Under PMA₹10,19,960Item Categories : LED Flood Light powder coated pressure die cast aluminum System lumen efficacy not less than 135 lm
L4RAMESH ELECTRICAL & MECHANICAL WORKS (MSE,MII)( MSE Social Category:General )    Under PMA₹11,03,556Item Categories : LED Flood Light powder coated pressure die cast aluminum System lumen efficacy not less than 135 lm