GEM

Contract Bidding Open For Wire Mesh Fabric or Cloth (V2) as per IS 1568,Tower Bolts (Non-Ferrous Metals) V2 as per IS 204,PTM

Posted

16 Oct 2025, 05:32 pm

Deadline

27 Oct 2025, 02:00 pm

EMD

₹2,08,000

Progress

Issue16 Oct 2025, 05:32 pm

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

5414

Technical Specifications 25 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Standards	Product ISI marked	No
Product & Material	Material	Mild steel
Product & Material	Protective covering on the wire	No
Design & Dimension	Aperture	Rectangular
Design & Dimension	Average width of Aperture	1.18mm
Design & Dimension	Nominal diameter of mesh Wire(mm)	0.41
Design & Dimension	Length of woven wire cloth (meter)	15
Design & Dimension	Width of woven wire cloth (mm)	1200
Reports and Certifications	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification	No
Reports and Certifications	Test Report to be furnished to the buyer on demand	No

Item #2 Details

View Catalog

Category	Specification	Requirement
Generic	Governing Specification	As per IS 204
Generic	BIS Marked	Yes
Generic	Type of tower bolts as per Cl 3.1 of IS 204	Barrel Tower Bolts
Generic	Sub-type of tower bolts as per Cl 3.1 of IS 204	Aluminium Alloy Barrel Tower Bolts (Type - 4A)
MATERIAL	Material of Aluminium alloy tubes as per Table 3 of IS 204( Part 2)	designation 63400 WP or 63400 P of IS 1285
MATERIAL	Material of Aluminium alloy extruded rods as per Table 3 of IS 204( Part 2)	Designation 65032 WP of IS 733
MATERIAL	Brass sheets as per Table 3 of IS 204( Part 2)	Alloy designation CuZn 40 Condition HD of IS 410
MATERIAL	Cast brass as per Table 3 of IS 204( Part 2)	Grade CB.2 of IS 292
MATERIAL	Extruded brass as per Table 3 of IS 204( Part 2)	Type II Half hard condition of IS 319
MATERIAL	Zinc base alloy die casting as per Table 3 of IS 204 (Part 2)	Alloy Zn A14 Die casting of IS 742
Constructional	Fixing of knob with Bolt as per Cl 5.1.1 of IS 204(Part 2)	Screwed
Constructional	Barrel tower bolts should comply as per Cl 5.2.1 of IS 204 (Part 2) (choose NA for skeleton tower bolts)	Yes
Constructional	Skeleton tower bolts should comply as per Cl 5.2.2 of IS 204 (Part 2) (choose NA for Barrel tower bolts)	NA
DIMENSIONS	Length of Bolt/Barrel of Barrel Tower bolts as per Table 1 of IS 204 (Part 2) (mm)	250
DIMENSIONS	Diameter of Barrel and Skeleton Tower bolts (mm)	10.0
DIMENSIONS	Width of Barrel Tower bolts (mm)	32
DIMENSIONS	Minimum No. of equally spaced screw holes in barrel and sockets for wood screw for Barrel tower bolts	6
DIMENSIONS	Length of socket as per Table 1 of IS 204 (Part 2)	25
DIMENSIONS	Thickness of Brass or Zinc Alloy Metal of Barrel as per Table 1 of IS 204 (Part2)	1.5
DIMENSIONS	Thickness of Aluminium Alloy Metal of Barrel as per Table 1 of IS 204 (Part2)	1.6
DIMENSIONS	Thickness of Sheet brass Metal of Barrel as per Table 1 of IS 204 (Part2)	1-1.25
DIMENSIONS	Length of Bolt/Barrel of Skeleton tower bolts as per Table 2 of IS 204 (Part 2) (mm)	NA
DIMENSIONS	Width of Bolt plate or staple of Skeleton tower bolts (mm)	NA
DIMENSIONS	Minimum No. of screw holes for wood screw no. 4 in Skeleton tower bolts	NA
DIMENSIONS	Length of Staple in Skeleton tower bolts as per Table 2 of IS 204 (Part 2)	NA
DIMENSIONS	Thickness of Brass Plate or socket in Skeleton tower bolts as per Table 2 of IS 204 (Part2)	NA
DIMENSIONS	Thickness of Aluminium Alloy or Zinc alloy Plate or Socket of Skeleton tower bolts as per Table 2 of IS 204 (Part2)	NA
DIMENSIONS	No of Staples in Skeleton tower bolts as per Table 2 of IS 204 (Part 2)	NA
Marking and Packing	Packing of Barrel tower bolt shall be as per IS 8.1 of IS 204 (Part 2) (Choose NA for Skeleton tower bolts)	NA
Marking and Packing	Packing of Skeleton tower bolt shall be as per IS 8.2 of IS 204 (Part 2) (Choose NA for Barrel tower bolt)	NA
TEST REPORT	Avaibility of Test Report from the list of approved laboratory for Tower Bolts (Non-Ferrous Metals) as per IS: 204, latest	No
TEST REPORT	Test reports to be furnished to buyer on demand	Yes

Item #3 Details

View Catalog

Category	Specification	Requirement
ITEM	Item	Bib cock
MATERIAL	Material	PTMT(Polytetra Methylene Terephthalate)
DIMENSION	Nominal Size(in mm)	20
Marking	Logo marking as per buyer requirement	Yes

Item #4 Details

View Catalog

Category	Specification	Requirement
ITEM	Item	Pillar cock
MATERIAL	Material	PTMT(Polytetra Methylene Terephthalate)
DIMENSION	Nominal Size(in mm)	15
Marking	Logo marking as per buyer requirement	Yes

Item #5 Details

View Catalog

Category	Specification	Requirement
ITEM	Item	Angle stop cock
MATERIAL	Material	PTMT(Polytetra Methylene Terephthalate)
DIMENSION	Nominal Size(in mm)	15
Marking	Logo marking as per buyer requirement	Yes

Item #6 Details

View Catalog

Category	Specification	Requirement
Items	Definition	inset Sink
Items	Type of Sink	Single bowl single drainer plateform left hand
Specification	Conformity to indian standard IS 2963/ IS 3311	Yes
Specification	Product is BIS marked	No
Material	Material	Austenitic stainless steel of Grade Designation X04Crl9Ni9 (Numerical symbol 304) conforming
Shape, Design and Colour	Top Shape of the Bowl	Rectangular
Shape, Design and Colour	Sink with one small bowl	No
Shape, Design and Colour	Tap holes	Without
Shape, Design and Colour	No of Tap Holes	NA
Shape, Design and Colour	Over Flows Holes	Without
Dimensions	Overall Sink Length (mm)	481-500
Dimensions	Overall Sink Width (mm)	400 -420
Dimensions	Bowl Length (mm)	401-420
Dimensions	Bowl width (mm)	340 -360
Dimensions	Depth of Bowl (mm)	200-220
Dimensions	Small Bowl Length (mm)	NA
Dimensions	Small Bowl Width (mm)	NA
Dimensions	Small Bowl depth (mm)	NA
Dimensions	After Forming SS Sheet/Strip Thickness (mm)	0.86-0.9
Dimensions	Diameter of Tap holes (mm)	NA
Dimensions	Distance between two Tap holes (mm)	NA
Dimensions	Waste outlet Size (mm)	32
Finish	Finish	Polished

Item #7 Details

View Catalog

Category	Specification	Requirement
Items	Definition	inset Sink
Items	Type of Sink	Single bowl single drainer plateform left hand
Specification	Conformity to indian standard IS 2963/ IS 3311	No
Specification	Product is BIS marked	No
Material	Material	Austenitic stainless steel of Grade Designation X04Crl9Ni9 (Numerical symbol 304) conforming
Shape, Design and Colour	Top Shape of the Bowl	Rectangular
Shape, Design and Colour	Sink with one small bowl	Yes
Shape, Design and Colour	Tap holes	Without
Shape, Design and Colour	No of Tap Holes	NA
Shape, Design and Colour	Over Flows Holes	Without
Dimensions	Overall Sink Length (mm)	661-680
Dimensions	Overall Sink Width (mm)	441-460
Dimensions	Bowl Length (mm)	401-420
Dimensions	Bowl width (mm)	340 -360
Dimensions	Depth of Bowl (mm)	200-220
Dimensions	Small Bowl Length (mm)	NA
Dimensions	Small Bowl Width (mm)	NA
Dimensions	Small Bowl depth (mm)	NA
Dimensions	After Forming SS Sheet/Strip Thickness (mm)	0.86-0.9
Dimensions	Diameter of Tap holes (mm)	NA
Dimensions	Distance between two Tap holes (mm)	NA
Dimensions	Waste outlet Size (mm)	32
Finish	Finish	Polished

Item #8 Details

View Catalog

Category	Specification	Requirement
GENERIC	Operating Mechanism	Push Button Type
GENERIC	Flushing Operation	Dual Flush System
GENERIC	CAPACITY OF THE CISTERN IN LITRES	10 LTR
GENERIC	Flush Pipe	With
MATERIAL	Material of Flush Pipe	PVC
MATERIAL	Material of Cistern	HDPE
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	2

Item #9 Details

View Catalog

Category	Specification	Requirement
GENERIC	Conformity to Indian Standard	IS: 2556 (Part - 4) Latest
GENERIC	Pattern	Other Pattern
CONSTRUCTION	Overall length (cm) (±10)	60
CONSTRUCTION	Overall Breadth (cm) (±10)	60
CONSTRUCTION	Overall Heigth (cm) (±10)	40
CONSTRUCTION	Bottle Trap	Without
CONSTRUCTION	Shape	Semi Circle
CONSTRUCTION	Height of the Pedstal (cm) (±10)	No Pedastal
PERFORMANCE	Fixing Arrangement	Bracket Stud
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	1

Item #10 Details

View Catalog

Category	Specification	Requirement
Generic	Type of Fitting	Single Towel Rail/bar
Generic	Material of product	Stainless Steel 302, Stainless steel 304 Or higher
Generic	Shape of product (NA for robehook)	line
Generic	Finish of product	Nickle chrome
Dimension	Inner Diameter of towel ring (cm)	NA
Dimension	Thickness of rod (cm)	10-12
Dimension	Length of towel rail/bar/ robehook	22.1-25
Dimension	width of towel rail/bar	NA
Dimension	Length of towel rack (cm)	NA
Dimension	Width in towel rack (cm)	NA
Dimension	Number of hooks provided with rail	0.0 Or higher
Features	Flange provided along with product	No
Features	Product is Waterproof	Yes
Features	Wall plugs provided	Yes
Features	Material of the product to be Corrosion resistant	Yes
Test Reports	Availability of test report from central govt/ NABL/ILAC accredited lab covering all parameters	No
Test Reports	Copies of all certifications and reports to be provided to buyer on demand at time of supplies	No

Item #11 Details

View Catalog

Category	Specification	Requirement
Generic	Washer Provided	Yes
Material	Connection Pipe Material	PVC Metal Braided Pipe
Material	Connection Nut Material	Brass Or higher
Material	Washer Material	Silicon Or higher
Dimensions	Connection Thread Size(in mm)	15
Dimensions	Length of Connection Pipe(in mm)	450
Dimensions	Pressure Rating(kg/cm²)	1 Or higher
Dimensions	Diameter of Pipe (in mm)	15
TEST REPORT	Availability of Test Report from Central Govt /NABL/ILAC accredited lab to prove confirmity to specification	No

Item #12 Details

View Catalog

Category	Specification	Requirement
Generic	Washer Provided	Yes
Material	Connection Pipe Material	PVC Metal Braided Pipe
Material	Connection Nut Material	Brass Or higher
Material	Washer Material	Silicon Or higher
Dimensions	Connection Thread Size(in mm)	15
Dimensions	Length of Connection Pipe(in mm)	600
Dimensions	Pressure Rating(kg/cm²)	1 Or higher
Dimensions	Diameter of Pipe (in mm)	15
TEST REPORT	Availability of Test Report from Central Govt /NABL/ILAC accredited lab to prove confirmity to specification	No

Item #13 Details

View Catalog

Category	Specification	Requirement
GENERIC	ISI Marking	No
DIMENSIONS	Patterns of Urinal as per Clause 5.1 of IS 2556 (Part 6)	Wall-hung urinal (angle back) without flushing rim
DIMENSIONS	Size of Urinals (mm) as per Clause 5.1 of IS 2556 (Part 6)	580 × 500 × 300
DIMENSIONS	Minimum distance of Urinal (in mm) As Per Table 1 of IS 2556 (Part 6)	100
DIMENSIONS	In a sensor operated urinal, the sensors may also be separately placed on the wall and connected with the urinals through pipe for water supply in the urinal as per clause 5.4 of IS 2556 (Part 6) (Select NA for Urinals other than Sensor operated)	NA
WARRANTY	Warranty (Years)	3, 4 Or higher
TEST REPORT	Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove confirmity to specification	No
TEST REPORT	Test Report to be furnished to the buyer on demand	No

Item #14 Details

View Catalog

Category	Specification	Requirement
GENERIC	Pattern as per IS 2556 part 2	Pattern 1 with S-Trap
GENERIC	Flushing Rim Type	Box Rim Type, Open Rim Type

Item #15 Details

View Catalog

Category	Specification	Requirement
Item	Type of Waste Pipe	Flexible
Material	Material of Pipe	Polypropylene
Material	Material of Waste Coupling attached with Pipe	HDPE
Dimension	Basin Connection Size (in mm)	40
Dimension	Length of Pipe(in mm)	750
Dimension	Pipe Outer Diameter(in mm)	40
Dimension	Pipe Wall Thickness(in mm)	1.5

Item #16 Details

View Catalog

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	32 mm for washbasin
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	1

Item #17 Details

View Catalog

Category	Specification	Requirement
RAW MATERIAL	Material of Waste Fitting	Brass conforming to Grade 3 of IS 292/1961
DIMENSION	Nominal Size	50 mm for sink
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	2

Item #18 Details

View Catalog

Category	Specification	Requirement
ITEM	ITEM	Curtain Pipe, Hanging Bracket
OTHER REQUIREMENTS	Sider(one pair per pipe)	Without
DIMENSON	Outside Diameter of curtain pipe (in mm)	25mm
DIMENSON	Length of curtain pipe( In Meter)	1, 3
DIMENSON	Minimum Wall thickness of pipe ( In MM)	3, 4, 5 Or higher
DIMENSON	Minimum thickness of Curtain pipe hanging bracket (in mm)	2, 3 Or higher

Item #19 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Fitting	Towel Ring
GENERIC	Thickness of Ni-Cr coating	Not less than Service Condition Number 2 of Table 3 of IS 1068/1993
CONSTRUCTIONAL	Material	Cast Brass Grade LCB-2 of IS:292/1983 for Towel Ring
CONSTRUCTIONAL	Minimum Thickness of pipe	0.75 mm
CONSTRUCTIONAL	Color	Steel
CONSTRUCTIONAL	Shape	Ring
CONSTRUCTIONAL	Towel Ring Inner Diameter	N.A
CONSTRUCTIONAL	Nominal Diameter of Pipe / Rod	18 mm
CONSTRUCTIONAL	Length of Towel Rail(mm)	NA
CONSTRUCTIONAL	Number of Mounting Bracket	1

Item #20 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Fitting	Towel Rail
GENERIC	Thickness of Ni-Cr coating	Not less than Service Condition Number 2 of Table 3 of IS 1068/1993
CONSTRUCTIONAL	Material	PLASTIC
CONSTRUCTIONAL	Minimum Thickness of pipe	solid plastic rod
CONSTRUCTIONAL	Color	cream
CONSTRUCTIONAL	Shape	open rectangle
CONSTRUCTIONAL	Towel Ring Inner Diameter	N.A
CONSTRUCTIONAL	Nominal Diameter of Pipe / Rod	18 mm
CONSTRUCTIONAL	Length of Towel Rail(mm)	600
CONSTRUCTIONAL	Number of Mounting Bracket	2

Item #21 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Fitting	Towel Ring
GENERIC	Thickness of Ni-Cr coating	Not less than Service Condition Number 2 of Table 3 of IS 1068/1993
CONSTRUCTIONAL	Material	Stainless Steel(SS 304)
CONSTRUCTIONAL	Minimum Thickness of pipe	0.75 mm
CONSTRUCTIONAL	Color	Steel
CONSTRUCTIONAL	Shape	Square
CONSTRUCTIONAL	Towel Ring Inner Diameter	N.A
CONSTRUCTIONAL	Nominal Diameter of Pipe / Rod	18 mm
CONSTRUCTIONAL	Length of Towel Rail(mm)	NA
CONSTRUCTIONAL	Number of Mounting Bracket	1

Item #22 Details

View Catalog

Category	Specification	Requirement
GENERIC	Material of Floor trap drains	PVC (Poly Vinyl Chloride )
GENERIC	Shape of Trap	Round Shape
GENERIC	LOAD CLASSIFICATION OF DRAIN TRAP (LOAD CAPACITY IN KG PER SQUARE CENTIMETER	MEDIUM DUTY 4.3 KGF CM2
DIMENSION	Thickness of Trap Material in mm (+/- 0 point 1 mm)	1.0
DIMENSION	LENGTH of Trap in mm (+/- 10 mm)	Circular
DIMENSION	Width (Diameter in case of circular) of Trap in mm (+/- 10 mm)	110
WARRANTY	WARANTEE PERIOD IN NUMBER OF YEARS	2

Item #23 Details

View Catalog

Category	Specification	Requirement
GENERIC	Material of Floor trap drains	PVC (Poly Vinyl Chloride )
GENERIC	Shape of Trap	Round Shape
GENERIC	LOAD CLASSIFICATION OF DRAIN TRAP (LOAD CAPACITY IN KG PER SQUARE CENTIMETER	MEDIUM DUTY 4.3 KGF CM2
DIMENSION	Thickness of Trap Material in mm (+/- 0 point 1 mm)	1.0
DIMENSION	LENGTH of Trap in mm (+/- 10 mm)	Circular
DIMENSION	Width (Diameter in case of circular) of Trap in mm (+/- 10 mm)	100
WARRANTY	WARANTEE PERIOD IN NUMBER OF YEARS	2

Item #24 Details

View Catalog

Category	Specification	Requirement
GENERIC	Pattern and Sizes	Long Pattern Squating Pan, Type I (Size 580 mm )
GENERIC	Flushing Rim Type	Box Rim Type
GENERIC	Type of Trap	P type trap with Inspection Vent
WARANTEE	WARANTEE PERIOD IN NUMBER OF YEARS	1

Item #25 Details

View Catalog

Category	Specification	Requirement
Ungrouped	Item	Stop Valve (Mixed End)
Ungrouped	Material of body and Bonnet	Cast Brass
Ungrouped	Nominal Size (mm)	15
Ungrouped	Finish	Nickel-Chromium plated with coating thickness Not less than Service Condition Number 2 of table 3 of IS 1068/1993
Ungrouped	Material of Gland,Crutch (handle), Washer Plate	Brass (Extruded, Rolled, Cast, die cast)
Ungrouped	Shape of Shoulder at the Bonnet	Hexagonal
Ungrouped	ISI marked	No

AI-Powered Bidder Prediction

Companies most likely to bid

Live

Unlock Bidder Insights

AI predictions on likely bidders

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Download FREE!

Access all tender documents at no cost

Documents 28

GeM-Bidding-8426352.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Contract Bidding Open For Wire Mesh Fabric or Cloth (V2) as per IS 1568,Tower Bolts (Non-Ferrous Metals) V2 as per IS 204,PTM

Categories 22

Technical Specifications 25 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

Item #21 Details

Item #22 Details

Item #23 Details

Item #24 Details

Item #25 Details

AI-Powered Bidder Prediction

Unlock Bidder Insights

Required Documents

Download FREE!

Documents 28

GeM-Bidding-8426352.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

Buyer uploaded ATC document

GEM General Terms and Conditions Document

GeM-Bidding-8426352.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18