GEM

Procurement Opportunity: 1.EMERGENCY ESCAPE SCUTTLES,2. ON BOARD SPARES FOR ESS,3.Documentation,4.EMERGENCY ESCAPE SCUTTLES, in MUMBAI, MAHARASHTRA

Bid Publish Date

26-Nov-2025, 3:48 pm

Bid End Date

17-Dec-2025, 2:00 pm

EMD

₹25,000

Location

MUMBAI , MAHARASHTRA

Progress

Issue26-Nov-2025, 3:48 pm
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

30

Category

1.EMERGENCY ESCAPE SCUTTLES

Bid Type

Two Packet Bid

Categories 21

VALVE PARTS AND ACCESSORIES NUTS STOMACHERS SCREWS ALUMINIUM ALLOY WATER LEVEL RECORDER BINDING WASHERS PEB FILTER RETAINERS PRESS WRENCH BAR WHEEL ASSEMBLY PEN HARDWARE AND FASTENERS CLAMPS PINS WASHERS WOODEN TROLLEY ADJUSTABLE WRENCHES WHEEL BEARING

Mazagon Dock Shipbuilders Limited has released a public tender for 1. EMERGENCY ESCAPE SCUTTLES, 2. ON BOARD SPARES FOR ESS, 3. Documentation, 4. EMERGENCY ESCAPE SCUTTLES, 5. ON BOARD SPARES FOR ESS, 6. Documentation, 7. EMERGENCY ESCAPE SCUTTLES, 8. ON BOARD SPARES FOR ESS, 9. Documentation, 10. EMERGENCY ESCAPE SCUTTLES, 11. ON BOARD SPARES FOR ESS, 12. Documentation, 13. EMERGENCY ESCAPE SCUTTLES, 14. ON BOARD SPARES FOR ESS, 15. Documentation, 16. EMERGENCY ESCAPE SCUTTLES, 17. ON BOARD SPARES FOR ESS, 18. Documentation in MUMBAI, MAHARASHTRA. Quantity: 30. Submission Deadline: 17-12-2025 14: 00: 00. Download documents and apply online.

Past Similar Tenders (Historical Results)

5 found

SPARES 1,SPARES2,SPARES 3,SPARES 4,INSTALL

Bharat Petroleum Corporation Ltd

GAUTAM BUDDHA NAGAR, UTTAR PRADESH

Posted: 18 March 2025
Closed: 1 April 2025
GEM

SPARES FOR METROHM INSTRUMENTS-1,SPARES FOR METROHM INSTRUMENTS-2,SPARES FOR METROHM INSTRUMENTS-3,

Hindustan Organic Chemicals Limited

ERNAKULAM, KERALA

Posted: 24 September 2025
Closed: 8 October 2025
GEM

X, Y, Z Marking,A, M, R Marking,ESCAPE Marking,Mind Your Head Marking,1,2,3,4,5 Marking of Extingui

Indian Coast Guard

AMRELI, GUJARAT

Posted: 22 September 2025
Closed: 3 October 2025
GEM

Procurement of Boat Davit Spares and MSB spares onboard ICGS C-453 1,Procurement of Boat Davit Spar

Indian Coast Guard

CHENNAI, TAMIL NADU

Posted: 10 February 2025
Closed: 3 March 2025
GEM

Genr Spares for Eicher,Spares for Kirloskar,Spares for Koel,Spares for Mahindra,CABLES AND ACCESSOR

Indian Army

RAJAURI, JAMMU & KASHMIR

Posted: 4 January 2025
Closed: 27 January 2025
GEM

Bill of Quantities (BOQ) 18 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 1.EMERGENCY ESCAPE SCUTTLES 01.SIZE CLEAR OPENING DIAMETER 800 MM 02.COLOR GREEN ON BOTH SIDES.THE HANDLES TO BE MARKED WITH PHOTO LUMINESCENT TAPES. 03.OPENING MECHANISM-ESCAPE SCUTTLES ARE TO BE SPRING ASSISTED AND PROVIDED WITH A WHEEL ASSEMBLY ON THE INSIDE AND A SLOT WITH A DETACHABLE OPERATING HANDLE FROM OUTSIDE FOR OPENING AND CLOSING OF THE SCUTTLES.THE OPERATING HANDLE SHOULD BE SUPPLIED WITH ASSOCIATED BULKHEAD-MOUNTABLE PRESS-FIT CLAMPS TO ENABLE SECURING THE OPERATING HANDLE ONTO THE BULKHEAD. 04.MATERIAL- AS PER CLASS REQUIREMENT 05.ALL EES ARE TO BE FLUSH TYPE SPRING ASSISTED WITH AUTO RETENTION CLIP AND OPERABLE FROM ABOVE AND BELOW BY ONE PERSON.THEY ARE TO BE PROVIDED WITH AN OPENING ARRANGEMENT FROM ABOVE WITH DETACHABLE OPERATING HANDLE AND PRESS-FIT CLAMPS FOR SECURING THE HANDLE ON TO THE NEAREST BULKHEAD. 06.EES ARE REQUIRED TO OPERABLE FROM BOTH SIDES AND TESTED UP TO 1.2 BAR PRESSURE OR AS PER CLASS REQUIREMENT 07.MARKING- EACH SCUTTLE SHOULD HAVE PUNCH MARK WITH OEM NAME DATE OF FABRICATION MONTH AND YEAR .MARKING SYMBOLS SHOULD BE PROMINENT LEGIBLE AND I.A.W. WITH NES118 and NES119. 08.RUBBER BEADING-RUBBER BEADING OF SILICONE AS PER NCD 5910 ARE TO BE USED FOR THE EES 2 nos sbk_mdlstores 150
2 2. ON BOARD SPARES FOR ESS ON BOARD SPARES FOR ESS CONSISTING OF THE FOLLOWING -1.SS NUTS AND BOLT SETS- 10 NOS -2.SS SCREWS-10 NOS -3.BRASS WASHERS-10 NOS -4.SPLIT PINS-04 NOS -5.SILICON RUBBER BEADING-04 MTRS -6.ADJUSTABLE SPANNER-01 NOS 1 set sbk_mdlstores 150
3 3.Documentation DOCUMENTATION -1.CLASS APPROVED DRAWINGS- 01 NOS. -2.TECHNICAL -OPERATING-INSTALLATION-TESTING and MAINTENANCE MANUAL-01 NOS. -3.INSPECTION RELEASE NOTE-INSPECTION REPORTS OF INSPECTION AGENCY-CERTIFIED TEST REPORTS-MATERIALTEST REPORTS-CERTIFICATE FOR DIMENSIONAL ACCURACY WEIGHT CERTIFICATES WITH POSITION OF C.G ETC-01 NOS. -4.SOFT COPY OF ALL ABOVE DOCUMENTS IN CD OR PEN DRIVE-01 NOS. 2 set sbk_mdlstores 150
4 4.EMERGENCY ESCAPE SCUTTLES 01.SIZE CLEAR OPENING DIAMETER 800 MM 02.COLOR GREEN ON BOTH SIDES.THE HANDLES TO BE MARKED WITH PHOTO LUMINESCENT TAPES. 03.OPENING MECHANISM-ESCAPE SCUTTLES ARE TO BE SPRING ASSISTED AND PROVIDED WITH A WHEEL ASSEMBLY ON THE INSIDE AND A SLOT WITH A DETACHABLE OPERATING HANDLE FROM OUTSIDE FOR OPENING AND CLOSING OF THE SCUTTLES.THE OPERATING HANDLE SHOULD BE SUPPLIED WITH ASSOCIATED BULKHEAD-MOUNTABLE PRESS-FIT CLAMPS TO ENABLE SECURING THE OPERATING HANDLE ONTO THE BULKHEAD. 04.MATERIAL- AS PER CLASS REQUIREMENT 05.ALL EES ARE TO BE FLUSH TYPE SPRING ASSISTED WITH AUTO RETENTION CLIP AND OPERABLE FROM ABOVE AND BELOW BY ONE PERSON.THEY ARE TO BE PROVIDED WITH AN OPENING ARRANGEMENT FROM ABOVE WITH DETACHABLE OPERATING HANDLE AND PRESS-FIT CLAMPS FOR SECURING THE HANDLE ON TO THE NEAREST BULKHEAD. 06.EES ARE REQUIRED TO OPERABLE FROM BOTH SIDES AND TESTED UP TO 1.2 BAR PRESSURE OR AS PER CLASS REQUIREMENT 07.MARKING- EACH SCUTTLE SHOULD HAVE PUNCH MARK WITH OEM NAME DATE OF FABRICATION MONTH AND YEAR .MARKING SYMBOLS SHOULD BE PROMINENT LEGIBLE AND I.A.W. WITH NES118 and NES119. 08.RUBBER BEADING-RUBBER BEADING OF SILICONE AS PER NCD 5910 ARE TO BE USED FOR THE EES 2 nos sbk_mdlstores 300
5 5. ON BOARD SPARES FOR ESS ON BOARD SPARES FOR ESS CONSISTING OF THE FOLLOWING -1.SS NUTS AND BOLT SETS- 10 NOS -2.SS SCREWS-10 NOS -3.BRASS WASHERS-10 NOS -4.SPLIT PINS-04 NOS -5.SILICON RUBBER BEADING-04 MTRS -6.ADJUSTABLE SPANNER-01 NOS 1 set sbk_mdlstores 300
6 6.Documentation DOCUMENTATION -1.CLASS APPROVED DRAWINGS- 01 NOS. -2.TECHNICAL -OPERATING-INSTALLATION-TESTING and MAINTENANCE MANUAL-01 NOS. -3.INSPECTION RELEASE NOTE-INSPECTION REPORTS OF INSPECTION AGENCY-CERTIFIED TEST REPORTS-MATERIALTEST REPORTS-CERTIFICATE FOR DIMENSIONAL ACCURACY WEIGHT CERTIFICATES WITH POSITION OF C.G ETC-01 NOS. -4.SOFT COPY OF ALL ABOVE DOCUMENTS IN CD OR PEN DRIVE-01 NOS. 2 set sbk_mdlstores 300
7 7.EMERGENCY ESCAPE SCUTTLES 01.SIZE CLEAR OPENING DIAMETER 800 MM 02.COLOR GREEN ON BOTH SIDES.THE HANDLES TO BE MARKED WITH PHOTO LUMINESCENT TAPES. 03.OPENING MECHANISM-ESCAPE SCUTTLES ARE TO BE SPRING ASSISTED AND PROVIDED WITH A WHEEL ASSEMBLY ON THE INSIDE AND A SLOT WITH A DETACHABLE OPERATING HANDLE FROM OUTSIDE FOR OPENING AND CLOSING OF THE SCUTTLES.THE OPERATING HANDLE SHOULD BE SUPPLIED WITH ASSOCIATED BULKHEAD-MOUNTABLE PRESS-FIT CLAMPS TO ENABLE SECURING THE OPERATING HANDLE ONTO THE BULKHEAD. 04.MATERIAL- AS PER CLASS REQUIREMENT 05.ALL EES ARE TO BE FLUSH TYPE SPRING ASSISTED WITH AUTO RETENTION CLIP AND OPERABLE FROM ABOVE AND BELOW BY ONE PERSON.THEY ARE TO BE PROVIDED WITH AN OPENING ARRANGEMENT FROM ABOVE WITH DETACHABLE OPERATING HANDLE AND PRESS-FIT CLAMPS FOR SECURING THE HANDLE ON TO THE NEAREST BULKHEAD. 06.EES ARE REQUIRED TO OPERABLE FROM BOTH SIDES AND TESTED UP TO 1.2 BAR PRESSURE OR AS PER CLASS REQUIREMENT 07.MARKING- EACH SCUTTLE SHOULD HAVE PUNCH MARK WITH OEM NAME DATE OF FABRICATION MONTH AND YEAR .MARKING SYMBOLS SHOULD BE PROMINENT LEGIBLE AND I.A.W. WITH NES118 and NES119. 08.RUBBER BEADING-RUBBER BEADING OF SILICONE AS PER NCD 5910 ARE TO BE USED FOR THE EES 2 nos sbk_mdlstores 450
8 8. ON BOARD SPARES FOR ESS ON BOARD SPARES FOR ESS CONSISTING OF THE FOLLOWING -1.SS NUTS AND BOLT SETS- 10 NOS -2.SS SCREWS-10 NOS -3.BRASS WASHERS-10 NOS -4.SPLIT PINS-04 NOS -5.SILICON RUBBER BEADING-04 MTRS -6.ADJUSTABLE SPANNER-01 NOS 1 set sbk_mdlstores 450
9 9.Documentation DOCUMENTATION -1.CLASS APPROVED DRAWINGS- 01 NOS. -2.TECHNICAL -OPERATING-INSTALLATION-TESTING and MAINTENANCE MANUAL-01 NOS. -3.INSPECTION RELEASE NOTE-INSPECTION REPORTS OF INSPECTION AGENCY-CERTIFIED TEST REPORTS-MATERIALTEST REPORTS-CERTIFICATE FOR DIMENSIONAL ACCURACY WEIGHT CERTIFICATES WITH POSITION OF C.G ETC-01 NOS. -4.SOFT COPY OF ALL ABOVE DOCUMENTS IN CD OR PEN DRIVE-01 NOS. 2 set sbk_mdlstores 450
10 10.EMERGENCY ESCAPE SCUTTLES 01.SIZE CLEAR OPENING DIAMETER 800 MM 02.COLOR GREEN ON BOTH SIDES.THE HANDLES TO BE MARKED WITH PHOTO LUMINESCENT TAPES. 03.OPENING MECHANISM-ESCAPE SCUTTLES ARE TO BE SPRING ASSISTED AND PROVIDED WITH A WHEEL ASSEMBLY ON THE INSIDE AND A SLOT WITH A DETACHABLE OPERATING HANDLE FROM OUTSIDE FOR OPENING AND CLOSING OF THE SCUTTLES.THE OPERATING HANDLE SHOULD BE SUPPLIED WITH ASSOCIATED BULKHEAD-MOUNTABLE PRESS-FIT CLAMPS TO ENABLE SECURING THE OPERATING HANDLE ONTO THE BULKHEAD. 04.MATERIAL- AS PER CLASS REQUIREMENT 05.ALL EES ARE TO BE FLUSH TYPE SPRING ASSISTED WITH AUTO RETENTION CLIP AND OPERABLE FROM ABOVE AND BELOW BY ONE PERSON.THEY ARE TO BE PROVIDED WITH AN OPENING ARRANGEMENT FROM ABOVE WITH DETACHABLE OPERATING HANDLE AND PRESS-FIT CLAMPS FOR SECURING THE HANDLE ON TO THE NEAREST BULKHEAD. 06.EES ARE REQUIRED TO OPERABLE FROM BOTH SIDES AND TESTED UP TO 1.2 BAR PRESSURE OR AS PER CLASS REQUIREMENT 07.MARKING- EACH SCUTTLE SHOULD HAVE PUNCH MARK WITH OEM NAME DATE OF FABRICATION MONTH AND YEAR .MARKING SYMBOLS SHOULD BE PROMINENT LEGIBLE AND I.A.W. WITH NES118 and NES119. 08.RUBBER BEADING-RUBBER BEADING OF SILICONE AS PER NCD 5910 ARE TO BE USED FOR THE EES 2 nos sbk_mdlstores 600
11 11. ON BOARD SPARES FOR ESS ON BOARD SPARES FOR ESS CONSISTING OF THE FOLLOWING -1.SS NUTS AND BOLT SETS- 10 NOS -2.SS SCREWS-10 NOS -3.BRASS WASHERS-10 NOS -4.SPLIT PINS-04 NOS -5.SILICON RUBBER BEADING-04 MTRS -6.ADJUSTABLE SPANNER-01 NOS 1 set sbk_mdlstores 600
12 12.Documentation DOCUMENTATION -1.CLASS APPROVED DRAWINGS- 01 NOS. -2.TECHNICAL -OPERATING-INSTALLATION-TESTING and MAINTENANCE MANUAL-01 NOS. -3.INSPECTION RELEASE NOTE-INSPECTION REPORTS OF INSPECTION AGENCY-CERTIFIED TEST REPORTS-MATERIALTEST REPORTS-CERTIFICATE FOR DIMENSIONAL ACCURACY WEIGHT CERTIFICATES WITH POSITION OF C.G ETC-01 NOS. -4.SOFT COPY OF ALL ABOVE DOCUMENTS IN CD OR PEN DRIVE-01 NOS. 2 set sbk_mdlstores 600
13 13.EMERGENCY ESCAPE SCUTTLES 01.SIZE CLEAR OPENING DIAMETER 800 MM 02.COLOR GREEN ON BOTH SIDES.THE HANDLES TO BE MARKED WITH PHOTO LUMINESCENT TAPES. 03.OPENING MECHANISM-ESCAPE SCUTTLES ARE TO BE SPRING ASSISTED AND PROVIDED WITH A WHEEL ASSEMBLY ON THE INSIDE AND A SLOT WITH A DETACHABLE OPERATING HANDLE FROM OUTSIDE FOR OPENING AND CLOSING OF THE SCUTTLES.THE OPERATING HANDLE SHOULD BE SUPPLIED WITH ASSOCIATED BULKHEAD-MOUNTABLE PRESS-FIT CLAMPS TO ENABLE SECURING THE OPERATING HANDLE ONTO THE BULKHEAD. 04.MATERIAL- AS PER CLASS REQUIREMENT 05.ALL EES ARE TO BE FLUSH TYPE SPRING ASSISTED WITH AUTO RETENTION CLIP AND OPERABLE FROM ABOVE AND BELOW BY ONE PERSON.THEY ARE TO BE PROVIDED WITH AN OPENING ARRANGEMENT FROM ABOVE WITH DETACHABLE OPERATING HANDLE AND PRESS-FIT CLAMPS FOR SECURING THE HANDLE ON TO THE NEAREST BULKHEAD. 06.EES ARE REQUIRED TO OPERABLE FROM BOTH SIDES AND TESTED UP TO 1.2 BAR PRESSURE OR AS PER CLASS REQUIREMENT 07.MARKING- EACH SCUTTLE SHOULD HAVE PUNCH MARK WITH OEM NAME DATE OF FABRICATION MONTH AND YEAR .MARKING SYMBOLS SHOULD BE PROMINENT LEGIBLE AND I.A.W. WITH NES118 and NES119. 08.RUBBER BEADING-RUBBER BEADING OF SILICONE AS PER NCD 5910 ARE TO BE USED FOR THE EES 2 nos sbk_mdlstores 750
14 14. ON BOARD SPARES FOR ESS ON BOARD SPARES FOR ESS CONSISTING OF THE FOLLOWING -1.SS NUTS AND BOLT SETS- 10 NOS -2.SS SCREWS-10 NOS -3.BRASS WASHERS-10 NOS -4.SPLIT PINS-04 NOS -5.SILICON RUBBER BEADING-04 MTRS -6.ADJUSTABLE SPANNER-01 NOS 1 set sbk_mdlstores 750
15 15.Documentation DOCUMENTATION -1.CLASS APPROVED DRAWINGS- 01 NOS. -2.TECHNICAL -OPERATING-INSTALLATION-TESTING and MAINTENANCE MANUAL-01 NOS. -3.INSPECTION RELEASE NOTE-INSPECTION REPORTS OF INSPECTION AGENCY-CERTIFIED TEST REPORTS-MATERIALTEST REPORTS-CERTIFICATE FOR DIMENSIONAL ACCURACY WEIGHT CERTIFICATES WITH POSITION OF C.G ETC-01 NOS. -4.SOFT COPY OF ALL ABOVE DOCUMENTS IN CD OR PEN DRIVE-01 NOS. 2 set sbk_mdlstores 750
16 16.EMERGENCY ESCAPE SCUTTLES 01.SIZE CLEAR OPENING DIAMETER 800 MM 02.COLOR GREEN ON BOTH SIDES.THE HANDLES TO BE MARKED WITH PHOTO LUMINESCENT TAPES. 03.OPENING MECHANISM-ESCAPE SCUTTLES ARE TO BE SPRING ASSISTED AND PROVIDED WITH A WHEEL ASSEMBLY ON THE INSIDE AND A SLOT WITH A DETACHABLE OPERATING HANDLE FROM OUTSIDE FOR OPENING AND CLOSING OF THE SCUTTLES.THE OPERATING HANDLE SHOULD BE SUPPLIED WITH ASSOCIATED BULKHEAD-MOUNTABLE PRESS-FIT CLAMPS TO ENABLE SECURING THE OPERATING HANDLE ONTO THE BULKHEAD. 04.MATERIAL- AS PER CLASS REQUIREMENT 05.ALL EES ARE TO BE FLUSH TYPE SPRING ASSISTED WITH AUTO RETENTION CLIP AND OPERABLE FROM ABOVE AND BELOW BY ONE PERSON.THEY ARE TO BE PROVIDED WITH AN OPENING ARRANGEMENT FROM ABOVE WITH DETACHABLE OPERATING HANDLE AND PRESS-FIT CLAMPS FOR SECURING THE HANDLE ON TO THE NEAREST BULKHEAD. 06.EES ARE REQUIRED TO OPERABLE FROM BOTH SIDES AND TESTED UP TO 1.2 BAR PRESSURE OR AS PER CLASS REQUIREMENT 07.MARKING- EACH SCUTTLE SHOULD HAVE PUNCH MARK WITH OEM NAME DATE OF FABRICATION MONTH AND YEAR .MARKING SYMBOLS SHOULD BE PROMINENT LEGIBLE AND I.A.W. WITH NES118 and NES119. 08.RUBBER BEADING-RUBBER BEADING OF SILICONE AS PER NCD 5910 ARE TO BE USED FOR THE EES 2 nos sbk_mdlstores 900
17 17. ON BOARD SPARES FOR ESS ON BOARD SPARES FOR ESS CONSISTING OF THE FOLLOWING -1.SS NUTS AND BOLT SETS- 10 NOS -2.SS SCREWS-10 NOS -3.BRASS WASHERS-10 NOS -4.SPLIT PINS-04 NOS -5.SILICON RUBBER BEADING-04 MTRS -6.ADJUSTABLE SPANNER-01 NOS 1 set sbk_mdlstores 900
18 18.Documentation DOCUMENTATION -1.CLASS APPROVED DRAWINGS- 01 NOS. -2.TECHNICAL -OPERATING-INSTALLATION-TESTING and MAINTENANCE MANUAL-01 NOS. -3.INSPECTION RELEASE NOTE-INSPECTION REPORTS OF INSPECTION AGENCY-CERTIFIED TEST REPORTS-MATERIALTEST REPORTS-CERTIFICATE FOR DIMENSIONAL ACCURACY WEIGHT CERTIFICATES WITH POSITION OF C.G ETC-01 NOS. -4.SOFT COPY OF ALL ABOVE DOCUMENTS IN CD OR PEN DRIVE-01 NOS. 2 set sbk_mdlstores 900

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

2

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer