IISCO Steel Plant Inductive Proximity Switch Tender BURNPUR Rajasthan (EN 60947-5-2) 2026
Bid Publish Date
01-Sep-2026, 8:32 pm
Bid End Date
11-Sep-2026, 9:00 pm
Location
Progress
Tender Overview
IISCO Steel Plant (SAIL) invites bids for the supply of an INDUCTIVE PROXIMITY SWITCH with M30X1.5 threaded, minimum 50 mm face length, overall length < 90 mm, and sensing range 10 mm. The device operates on 10-30 V DC, is a NO type, with 2-wire configuration and output current < 400 mA. Protection class IP67 or better, ambient operation up to 100°C, switching frequency ≥ 100 Hz, and voltage drop < 4.6 V. Housing: brass with bronze/nickel plating or stainless steel; sensing face PBT; flush-mountable with LED indication; includes 2-core PVC/PVC cable ≥ 2 m; two stainless steel lock nuts. Compliance: EN 60947-5-2. Quantity listed as a single item; inspection by MM indenting and SAIL ISP Burnpur post-receipt. Delivery: within 8 weeks of PO; warranty: 12 months from commissioning or 18 months from supply, whichever earlier. Documentation includes warranty certificate and factory test report; inspection criteria rely on supplied test certificates and technical specs. This is a centralized government-style procurement through GeM for the ISP Burnpur facility.
Technical Specifications & Requirements
- Product: Inductive proximity switch, M30X1.5 threaded, min face length 50 mm, overall length < 90 mm
- Sensing range: 10 mm; Operating voltage: 10-30 V DC; Type: NO; Cable: 2 core, ≥ 2 m
- Output: < 400 mA; Protection: short circuit and reverse polarity; IP rating: IP67 or better
- Materials: housing brass with bronze/nickel plating or stainless steel; sensing face PBT; mounting: flush with LED indication
- Standards: EN 60947-5-2 compliant
- Installation kit: includes 2 stainless steel lock nuts; installation diagram provided
- Qualification & testing: Factory Test Report and Warranty Certificate required; inspection at Central Store ISP Burnpur
- Delivery & warranty: delivery within 8 weeks; warranty 12 months from commissioning or 18 months from supply
Terms, Conditions & Eligibility
- Delivery: within 8 weeks of PO; inspection by MM and SAIL ISP Burnpur
- Warranty: 12 months from commissioning or 18 months from supply (whichever is earlier)
- Documentation: warranty certificate, factory test reports, test certificates with technical specs
- Payment/inspection: post-delivery inspection; GST as applicable with actuals; GST invoicing and portal screenshots required
- ATC/QA: joint inspection at Central Store ISP; installation manual and connection diagram to be supplied
- Eligibility: bidders must supply OEM/authorized documentation and relevant compliance certificates; ensure EN 60947-5-2 standard adherence
Key Specifications
-
Inductive proximity switch: M30X1.5 thread, min 50 mm face length, < 90 mm overall length
-
Sensing range 10 mm; operating voltage 10-30 V DC; NO contact; 2-core cable ≥ 2 m
-
Output current < 400 mA; IP67 or better; ambient temp up to 100°C; switching frequency ≥ 100 Hz
-
Housing: brass with bronze/nickel plating or stainless steel; sensing face PBT; flush-mountable with LED indicator
-
Standards: EN 60947-5-2; includes 2 stainless steel lock nuts; full documentation: warranty certificate and factory test report
Terms & Conditions
-
Delivery within 8 weeks of PO and post-receipt inspection at ISP Burnpur
-
12-month warranty from commissioning or 18 months from supply, whichever earlier
-
Documentation to include warranty certificate and factory test reports; GST actuals as applicable
Important Clauses
Payment Terms
GST as actuals or applicable rates; invoicing with GST portal screenshot; payment terms not explicitly stated in data
Delivery Schedule
Delivery within 8 weeks of PO date; inspection coordinated with MM indenting dept and ISP Burnpur
Penalties/Liquidated Damages
Not explicitly specified; potential for LD as per standard terms, if delivery/default occurs
Bidder Eligibility
-
OEM authorization or manufacturer capacity for inductive proximity switches
-
Experience in supplying similar industrial sensors to government facilities
-
GST registration and valid PAN; ability to furnish factory/test reports
Tender Data
Bid Details
Quantity
75
Bid Type
Two Packet Bid
Bid Validity
90 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
No
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Arbitration Clause
Yes (Arbitration clause document) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 Arbitration should not be routinely included in contracts
Mediation Clause
Yes (Mediation clause document) as per DoE OM No.F.1/2/2024-PPD dated 03.06.2024 mediation clause should not be routinely included in contracts and pre- litigation mediation can be taken up without any such clause also
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
INDUCTIVE PROXIMITY SWITCH, M30X1.5, THREADED LENGTH-MIN 50MM TOWARDS/ FACE, OVERALL LENGTH LESS THA
Payment Timelines
Payments shall be made to the Seller within 10 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
60
Delivery Locations
1
Delivery Cities
Paschim Bardhaman
Delivery Pincodes
713325
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Binoda Kumar Behera | 713325,Materials Management Dept. IISCO Steel Plant Burnpur | Paschim Bardhaman | West Bengal | 713325 | 75 | 60 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 6
GeM-Bidding-9775765.pdf
Main Document
Other Documents
OTHER
Other Documents
OTHER
Other Documents
OTHER
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Categories
2
Corrigendum Updates
1 Update Update
Required Documents
PAN card copy
GSTIN copy
Cancelled cheque
EFT mandate certified by bank
GST invoice scan and GST portal payment screenshot
Warranty Certificate
Factory Test Report
OEM authorization (if applicable)
Technical compliance certificates
Any other inspection/test certificates
Frequently Asked Questions
What documents are required for the inductive proximity switch tender in ISP Burnpur?
Bidders must submit OEM authorization, PAN, GSTIN, cancelled cheque, EFT mandate, and GST invoice copies along with factory test reports and warranty certificates. Ensure post-delivery inspection readiness by MM and SAIL ISP Burnpur, with documentation aligning to EN 60947-5-2 compliance.
How to meet eligibility criteria for ISCO proximity switch procurement 2026?
Demonstrate prior supply of similar sensors to government facilities, provide GST and PAN, and show financial stability. Include EN 60947-5-2 compliance and provide factory test certificates; ensure 8-week delivery readiness after PO and warranty commitments.
What are the key technical specs for the inductive proximity switch?
Key specs include M30X1.5 thread, min 50 mm face length, <90 mm overall length, sensing range 10 mm, 10-30 V DC operation, NO contact, 2-core cable ≥2 m, IP67, 100°C ambient, <4.6 V drop, 400 mA max load, EN 60947-5-2 compliance.
When is the delivery deadline for the ISP Burnpur proximity switch bid?
Delivery must occur within 8 weeks of PO date. Ensure readiness for post-receipt inspection by SAIL ISP Burnpur and MM indenting department, with all required test certificates provided.
What warranty terms apply to the proximity switch supply contract?
Warranty lasts 12 months from commissioning or 18 months from supply, whichever occurs earlier. Ensure warranty certificate is included with the shipment and that installation manuals are provided.
What are the essential standards and certifications required?
Bidders must meet EN 60947-5-2 compliance for inductive proximity switches, provide related test certificates, and ensure material housing options (brass with plating or stainless steel) and PBT sensing face meet spec.
What installation documents must accompany the bid submission?
Include connection diagram, installation manual, LED indication details, and post-purchase support information. Ensure the documents align with the supplied product data and EN 60947-5-2 standard, with SAIL ISP Burnpur installation-ready details.
How is GST handled for this tender in ISP Burnpur?
GST is reimbursed as actuals or as per applicable rates, whichever is lower, subject to quoted GST percentage. Upload GST invoice scans and GST portal payment confirmation with the bid and post-delivery invoices.