TenderDekho Logo
GEM

Invitation to Bid - Supplying of 0.63mm thick GSS Sheet,Supplying of 0.80mm thick GSS Sheet,Supplying of 1.00mm thick G in JODHPUR, RAJASTHAN

Bid Publish Date

15-Apr-2025, 4:28 pm

Bid End Date

06-May-2025, 3:00 pm

EMD

₹10,186

Value

₹5,09,228

Location

JODHPUR , RAJASTHAN

Progress

Issue15-Apr-2025, 4:28 pm
AwardPending
Explore all 5 tabs to view complete tender details

Quantity

1174

Bid Type

Two Packet Bid

Categories 121

COPPER WIRE APPARELS FILTERS CRANKSHAFT ASSY APFC PANEL ARCHERY BOW STRINGS PAINTING PLUMBING WORK COLD BOX ISDN COPPER CABLE STRUCTURE FABRICATION POWER CABLE CABBING EQUIPMENTS PTFE WIRE AIR CONDITIONER SPARE COLD ROOM CONTROL WIRE PIPE PROJECT TUBE AND FITTING ARNO STARTING CONTACTOR DUCT SUPPLY DESERT COOLER CABLE LADDER BUS CABLE WIRING ASSEMBLY HEAT EXCHANGERS STEEL FURNITURE DUCTS BI DISTILLATION UNIT DISTILLATION HARDWARE AND FASTENERS AC CONDENSER SUPPLY OF SCHOOL UNIFORM STRIP ELECTRICAL WIRE XLPE CABLE PIPING LIGHTENING PROTECTION DEVICE SEALS CLOTHING INSTRUMENTATION CABLE CENTRIFUGE BUCKETS ACCUMULATOR BLADDERS FREEZER WHEEL ASSEMBLY LOGIC ANALYZER WATER DRAINAGE AIR DUCT WATER PIPE LINE AC PLANT COPPER SHEET RUBBER AND ELASTOMERS WATER CONDUCTOR SYSTEM FIRE WATER LINE WATER SUPPLY STOMACHERS MATERIAL UNLOADING CONDUCTOR TRANSPORTATION COOLER WATER LINE POWER CONTROL CABLE REFRIGERATION SYSTEM DISTRIBUTION AND CONDITIONING AC PIPES HYDRAULIC BRAKE COILED CABLE LFH CABLE PVC CABLE AIR BLOWER RF PASSIVE COMPONENTS AWM WIRE PNEUMATIC BOLTS PRESSURE GAUGE AIR CONDITIONER PLANT POWER WIRE TECHNICAL SERVICES NUTS DRAINAGE LIGHT MICROSCOPES WATER LEVEL RECORDER WATER SUPPLY MATERIAL FUME HOODS ERECTION OF STRUCTURAL AIRCRAFT HYDRAULIC SYSTEMS LFH WIRE PIPE LAYING FIBERS THREADS AND YARNS TUBES AND PIPES BARE CABLE DUCTING TRANSITION METALS CABLE FABRICATOR BOOSTER DUCT WORK GAUGE MS PIPE LINE VALVE PARTS AND ACCESSORIES ESCRAP ROTARY EVAPORATORS AUTOMOTIVE CABLE STRUCTURE AIR CONDITION PLANT SCREWS GASKETS ERECTION OF PIPE KITCHEN EQUIPMENT UPVC PIPE CABLE SUPPLY DISTILLATION PLANT ALUMINUM CABLE TRAY METAL PRODUCTS AIR DUCTS BOOT VENTILATION DAMPERS MANUFACTURING SERVICES AC PRESSURE PIPE

Public procurement opportunity for Bharat Sanchar Nigam Limited Portal(bsnl) Supplying of 0. 63mm thick GSS Sheet, Supplying of 0. 80mm thick GSS Sheet, Supplying of 1. 00mm thick GSS Sheet, SITC of GI Volume Control Damper, Supplying and fixing of powder coated extruded aluminium Return Air Grills with louvers, Supplying and fixing of 4x16 sqmm power cable, Supplying and fixing of control cable of 3x2, 5sqmm, SITC of 40mm UPVC Pipe, SITC of 20mm UPVC Pipe, SITC MS Cable tray 100mm width x 50mm x 1. 6mm thickness, SITC MS Cable tray 150mm width x 50mm x 1. 6mm thickness, SITC of GI Strip for loop earthing, Dismantling and removing the existing laid old power or control cables, Dismantling the existing old package units, Recovering the existing laid refrigerant piping of old defective, Dismantling the existing old ducts of package units, Transportation of the existing fitted old dissmantled package A. C. units, ITC of 7 TR Sensible High Precision AC Package unit, Supplying and Charging of the Referigerant Gas R-407, Supply and fixing Liquid line filter drier, Supply and fixing of size 1-1 by 8 inch and 18 gauge copper referigerant pipe, Supply and fixing of size 7 by 8 inch and 18 gauge copper referigerant pipe, Supply and fixing of size 5 by 8 inch and 18 gauge copper referigerant pipe, laying of 1-1 by 8 inch recovered copper referigent pipe, laying of 7 by 8 inch recovered copper referigent pipe, laying of 5 by 8 inch recovered copper referigent pipe, Providing MS structure for outdoor or Indoor units, ITC of 100mm width x 50mm x 1. 6mm, ITC of 150mm width x 50mm x 1. 6mm, ITC of old recovered 4x10 sqmm cable, ITC of old recovered 4x1. 5 sqmm cable, Laying of existing 25 mm x 5 mm thick G. I. strip in JODHPUR, RAJASTHAN. Quantity: 1174 issued by. Submission Deadline: 06-05-2025 15: 00: 00. View full details and respond.

Documents 5

GeM-Bidding-7739659.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

BSNL Portal Transportation & ITC AC Works Tender Telangana 2025 - 25% Quantity Variation, EMD ₹51440

Bharat Sanchar Nigam Limited Portal(bsnl)

PATNA, BIHAR

Posted: 21 October 2025
Closed: 11 November 2025
GEM

Supplying of 800 KVA transformer,ITC of Transformer,S and F MS Angle iron,S and F MS Iron Flat,S an

Bharat Sanchar Nigam Limited Portal(bsnl)

PATNA, BIHAR

Posted: 19 September 2025
Closed: 30 September 2025
GEM

Supply and fixing of dia Cassing capping including bends collar screw and gatta,Supplying and drawi

All India Institute Of Speech And Hearing (aiish) Mysore

Posted: 9 October 2024
Closed: 4 December 2024
GEM

Supply of 26 TR Precision Air Conditioniner,SITC of Automatic changeover switch,SITC of Cu refriger

Indian Oil Corporation Limited

Posted: 13 December 2024
Closed: 27 December 2024
GEM

SUPPLY OF XLPE FRLS ZERO HALOGEN COPPER ARMOURED 36CORE X 2.5 SQMM CONTROL CABLE,LAYING OF 36C x 2.

Hindustan Petroleum Corporation Ltd

HASSAN, KARNATAKA

Posted: 26 June 2025
Closed: 18 July 2025
GEM

Bill of Quantities (BOQ) 32 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Supplying of 0.63mm thick GSS Sheet Supplying, installing, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, support as per approved drawing and specifications of 0.63mm thick GSS Sheet etc complete as required. 8 sqmtr abhati 30
2 Supplying of 0.80mm thick GSS Sheet Supplying, installing, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, support as per approved drawing and specifications of 0.80mm thick GSS Sheet etc complete as required. 5 sqmtr abhati 30
3 Supplying of 1.00mm thick GSS Sheet Supplying, installing, balancing and commissioning of fabricated at site GSS sheet metal rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, support as per approved drawing and specifications of 1.00mm thick GSS Sheet etc complete as required. 5 sqmtr abhati 30
4 SITC of GI Volume Control Damper SITC of GI Volume Control Damper complete with neoprene rubber gaskets,nuts , bolts, screws linkages, flanges etc. as per specifications etc complete as reqd.. 1 sqmtr abhati 30
5 Supplying and fixing of powder coated extruded aluminium Return Air Grills with louvers Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. 1 sqmtr abhati 30
6 Supplying and fixing of 4x16 sqmm power cable SITC of 4x16 sqmm PVC insulated PVC sheathed aluminum conductor armoured cable on the existing MS tray /walls with saddles/PVC of cables with glands etc. as required 50 mtr abhati 30
7 Supplying and fixing of control cable of 3x2,5sqmm SITC of 3x2.5 sqmm PVC insulated PVC sheathed copper conductor armoured cable for control wiring on the existing MS tray / walls with saddles/PVC thread/cable tie, screws etc. I/c end termination of cables with glands etc as required. 50 mtr abhati 30
8 SITC of 40mm UPVC Pipe SITC of 40mm UPVC pipe for Plumbing work for drainage requirement i/c reducer, elbows, tees, unions, bends,sockets, flanges etc. for making water line connection forvarious package Units of system etc. complete as required. 10 mtr abhati 30
9 SITC of 20mm UPVC Pipe SITC of 20mm UPVC pipe for Plumbing work for drainage requirement i/c reducer, elbows, tees, unions, bends,sockets, flanges etc. for making water line connection forvarious package Units of system etc. complete as required. 2 mtr abhati 30
10 SITC MS Cable tray 100mm width x 50mm x 1.6mm thickness SITC of 100mm width x 50mm x 1.6mm thickness size of perforated MS cable tray I/c Fabricating I/c horizontal and vertical bends reducers tees, cross members and other accessories as reqd, and duly suspended from the ceiling with MS suspenders and including paint etc. as required. 5 mtr abhati 30
11 SITC MS Cable tray 150mm width x 50mm x 1.6mm thickness SITC of 150mm width x 50mm x 1.6mm thickness size of perforated MS cable tray I/c Fabricating,horizontal and vertical bends reducers tees, cross members and other accessories as reqd, and duly suspended from the ceiling with MS suspenders and including paint etc. as required. 5 mtr abhati 30
12 SITC of GI Strip for loop earthing SITC 25mmx5mm thick G.I. strip for loop earthing on cable tray wall etc complete as required 10 mtr abhati 30
13 Dismantling and removing the existing laid old power or control cables Dismantling & removing the existing laid old power/control cables of booster fans, old package units, condenser units, heaters/pre-heaters system, humidification etc. complete by unscrewing/cutting from the related M.S. racks/tray as required, lowering down the same from different floor to ground floor & shifting the same to the place inside the exchange premises as directed by Eng.-in-charge. 1 job abhati 30
14 Dismantling the existing old package units Dismantling / removing the existing fitted old defective/working/ /worn out 05 nos.package A.C. units with related condensers & accessories like canvas connection, duct damper & place at out side AC plant room at same floor etc as directed by Eng.-in-charge. 1 job abhati 30
15 Recovering the existing laid refrigerant piping of old defective Recovering the existing laid refrigerant piping of old defective/working / worn out Hot gas & cold gas of different sizes complete by cutting/unscrewing /opening etc. fitted in between the package unit & condenser unit lowering down the same from different floor to ground floor and shifting the same to the place inside the exchange premises/keeping in safe custody as directed by Eng.-in-charge. 400 mtr abhati 30
16 Dismantling the existing old ducts of package units Dismantling the existing old ducts of package units along with fine filters & plenum complete by unscrewing, opening the flanges, supports,hangers, lowering down the same from different floor to ground floor i/c shifting the same to the place inside the exchange premises as directed by Eng.-in-charge. 25 sq mtr abhati 30
17 Transportation of the existing fitted old dissmantled package A.C. units Transportation of the existing fitted old dissmantled package A.C. units with related condensers & all accessories like Copper piping,copper cable, duct damper etc complete from the TE Bldg Jaisalmer to TE Bldg Sardarpura 3rd floor AC plant (03 Nos) and TE Bldg Basni 2 nd floor AC plant (02 Nos) Jodhpur and place the same in AC plant at position as directed by Eng.-in-charge i/c. loading at TE Jaisalmer and unloading at TE Sardarpura(03 Nos.) and TE Basni (02 Nos.) Jodhpur. 5 units abhati 30
18 ITC of 7 TR Sensible High Precision AC Package unit Installation, testing and commissioning of 7TR (sensible) HPAC Package units along with all accessories i.e inddor unit /outdoor unit/ duct dampar/ fire dampar/filters/canvas connection on existing frames i/c vaccumising, Flushing, nitrogen pressure testing etc complete as reqd.(02 Nos. at TE Sardarpura and 03 Nos. at TE Basni, Jodhpur.) (sensible) HPAC Package units along with all accessories i.e inddor unit /outdoor unit/ duct dampar/ fire dampar/filters/canvas connection on existing frames i/c vaccumising, Flushing, nitrogen pressure testing etc complete as reqd. 5 jobs abhati 30
19 Supplying and Charging of the Referigerant Gas R-407 Supplying and Charging of the Referigerant Gas R-407 or same as per Originally supplied with Package Units (Excluding R-22) etc. Complete as required. 85 kg abhati 30
20 Supply and fixing Liquid line filter drier Supply and fixing Liquid line filter drier suitable for R 407 etc complete as required ( Make Danfoss ) 5 nos abhati 30
21 Supply and fixing of size 1-1 by 8 inch and 18 gauge copper referigerant pipe Supply and fixing of the size 1-1 by 8 inch single run having 18 gauge copper referigerant piping on the existing MS perforated tray(wherever required) etc complete as reqd 5 mtr abhati 30
22 Supply and fixing of size 7 by 8 inch and 18 gauge copper referigerant pipe Supply and fixing of the size 7 by 8 inch single run having 18 gauge copper referigerant piping on the existing MS perforated tray(wherever required) etc complete as reqd 5 mtr abhati 30
23 Supply and fixing of size 5 by 8 inch and 18 gauge copper referigerant pipe Supply and fixing of the size 5 by 8 inch single run having 18 gauge copper referigerant piping on the existing MS perforated tray(wherever required) etc complete as reqd 5 mtr abhati 30
24 laying of 1-1 by 8 inch recovered copper referigent pipe Laying of 1-1 by 8 inch sizes of existing recovered copper referigerant piping on the MS perforated tray (wherever required) etc complete as reqd 80 mtr abhati 30
25 laying of 7 by 8 inch recovered copper referigent pipe Laying of 7 by 8 inch sizes of existing recovered copper referigerant piping on the MS perforated tray (wherever required) etc complete as reqd 80 mtr abhati 30
26 laying of 5 by 8 inch recovered copper referigent pipe Laying of 5 by 8 inch sizes of existing recovered copper referigerant piping on the MS perforated tray (wherever required) etc complete as reqd 10 mtr abhati 30
27 Providing MS structure for outdoor or Indoor units Providing MS structure for outdoor / Indoor units made out of solid channels / angles/flat i/c cutting, welding , painting etc as reqd. 40 kg abhati 30
28 ITC of 100mm width x 50mm x 1.6mm ITC of 100mm width x 50mm x 1.6mm thickness old recovered items complete with fixing/ laying etc complete as reqd. 10 mtr abhati 30
29 ITC of 150mm width x 50mm x 1.6mm ITC of 150mm width x 50mm x 1.6mm thickness old recovered items complete with fixing/ laying etc complete as reqd. 10 mtr abhati 30
30 ITC of old recovered 4x10 sqmm cable ITC of 4x10 sqmm cable as old recovered items complete with fixing/ laying etc complete as reqd. 75 mtr abhati 30
31 ITC of old recovered 4x1.5 sqmm cable ITC of 4x1.5 sqmm cable as old recovered items complete with fixing/ laying etc complete as reqd. 75 mtr abhati 30
32 Laying of existing 25 mm x 5 mm thick G.I. strip Laying of existing 25 mm x 5 mm thick G.I. strip for loop earthingon cable tray / wall etc as required 100 mtr abhati 30

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

Experience Criteria

2

Past Performance

3

Bidder Turnover

4

Certificate (Requested in ATC)

5

OEM Authorization Certificate

6

OEM Annual Turnover

7

Additional Doc 1 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

8

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Frequently Asked Questions

Key insights about RAJASTHAN tender market

What are the eligibility requirements for **GEM/2025/B/6140065**?

The eligibility requirements include being a registered entity with the appropriate licenses and certifications required for participation. Bidders must possess proven experience in projects of similar size and complexity, along with necessary financial statements that reflect their capability to manage the project efficiently.

What are the required certificates for participating in the tender?

To participate in the tender, bidders must present various certificates, which typically include business registration documents, GST registrations, quality assurance certifications, and any other relevant industry standards certifications that prove the bidder’s capability to comply with the technical specifications set in the tender documentation.

What is the registration process for bidders?

The registration process entails submitting an application along with the required documentation to the Department of Telecommunications. Interested bidders should ensure that all required certificates and financial documents are included to prevent delays in the registration process. Following registration, bidders will receive further information regarding participation.

What document formats are accepted for submission?

The accepted document formats for submission typically include PDF, DOCX, and other common file types that maintain the integrity of the documents submitted. It is essential to adhere to the formats specified in the tender guidelines for successful proposal acceptance.

What are the payment terms specified in the tender?

The payment terms may vary depending on the project stages and deliverables. Generally, payments are issued upon successful completion of specified milestones, along with the submission of necessary inspection and testing certifications that comply with established quality standards. Detailed terms are outlined in the tender documents, and adherence to these is crucial for prompt payment processing.