Tender Notice for Dismantling and Shifting of the existing 7.5 KVA EA set,Dismantling and Shifting of the existing 15 in KOLLAM, KERALA
Bid Publish Date
17-Sep-2026, 3:57 pm
Bid End Date
05-Oct-2026, 1:00 pm
EMD
₹15,059
Value
₹7,52,930
Location
Progress
A tender has been published for Bharat Sanchar Nigam Limited Portal(bsnl) Dismantling and Shifting of the existing 7. 5 KVA EA set, Dismantling and Shifting of the existing 15 and 20 KVA EA set, Dismantling and Shifting of the existing 30 KVA EA set, Providing and laying plain cement concrete, Providing and fixing 25 mm X 3 mm G. I. strip on surface or in recess for connections etc. as required. , Supplying and laying of UG cable of 1. 1 KV, Providing and laying 16 Sq mm PVC insulated FRLS earthing cable green including providing necessary copper sockets as required, Supplying and making end terminations, Providing maintenance free earthing arrangement, Supply and install 8 SWG GI wire for loop earthing, Earthing with G. I. Eatrth pipe 1. 5Mtr long by hammering of 40 mm dia including accessories as required. , SITC of 63 A, 4 Pole On Load Change over switch, Dismantling of existing canopy of 7 5 15 20 and 30 KVA EA sets, Supplying and fixing 50 mm dia Class B MS pipes for the exhaust system of the EA set, Supplying and fixing 40 mm dia A class GI pipe for cable protection and silencer support including necessary supports painting welding if required etc as required, Painting of EA set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust, cleaning etc complete as required, Supplying and laying 20 mm dia Class C MS Pipe in KOLLAM, KERALA. Quantity: 676 by. Submission Deadline: 05-10-2026 13: 00: 00. Check eligibility and apply.
Tender Data
Bid Details
Quantity
676
Category
Dismantling and Shifting of the existing 15 and 20 KVA EA set
Bid Type
Two Packet Bid
Bid Validity
150 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
3 Days
Preference & Exemptions
EMD Required
Yes
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
25
OEM Avg. Turnover
3
Past Performance
30 %
Experience Required
1 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Dismantling and Shifting of the existing 7.5 KVA EA set , Dismantling and Shifting of the existing 15 and 20 KVA EA set , Dismantling and Shifting of the existing 30 KVA EA set , Providing and laying plain cement concrete , Providing and fixing 25 mm X 3 mm G.I. strip on surface or in recess for connections etc. as required. , Supplying and laying of UG cable of 1.1 KV , Providing and laying 16 Sq mm PVC insulated FRLS earthing cable green including providing necessary copper sockets as required , Supplying and making end terminations , Providing maintenance free earthing arrangement , Supply and install 8 SWG GI wire for loop earthing , Earthing with G.I. Eatrth pipe 1.5Mtr long by hammering of 40 mm dia including accessories as required. , SITC of 63 A , 4 Pole On Load Change over switch , Dismantling of existing canopy of 7 5 15 20 and 30 KVA EA sets , Supplying and fixing 50 mm dia Class B MS pipes for the exhaust system of the EA set , Supplying and fixing 40 mm dia A class GI pipe for cable protection and silencer support including necessary supports painting welding if required etc as required , Painting of EA set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust ,cleaning etc complete as required , Supplying and laying 20 mm dia Class C MS Pipe
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
21
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
Kollam
Delivery Pincodes
691012
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Mahesh Prabhakaran Nair | 691012,O/o General Manager BSNL Bhavan Vellayittambalam Kollam | Kollam | Kerala | 691012 | 1 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9889092.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
17 Items Sign in to view GEM price trends Sign in for GEM prices
Dismantling and Shifting of the existing 7.5 KVA EA set
Dismantling and Shifting of the existing 7.5 KVA EA testing the EA set making good the damages to the foundation etc. as required.
Dismantling and Shifting of the existing 15 and 20 KVA EA set
Dismantling & Shifting of the existing 15/20 KVA EA set with acoustic enclosure from various BTS with all accessories to a location within the BA as directed by the authority concerned incharge loading ,transportation,unloading leading to position and ITC of the shifted 15 KVA EA set with enclosure in the existing foundation at the new station, connections with the existing power and earth cables/strips, testing the EA set making good the damages to the foundation etc. as required.
Dismantling and Shifting of the existing 30 KVA EA set
Dismantling & Shifting of the existing 30 KVA EA set with acoustic enclosure from various BTS with all accessories to a location within the BA as directed by the authority concerned incharge loading ,transportation,unloading leading to position and ITC of the shifted 15 KVA EA set with enclosure in the existing foundation at the new station, connections with the existing power and earth cables/strips, testing the EA set making good the damages to the foundation etc. as required.
Providing and laying plain cement concrete
Providing and laying plain cement concrete in the ratio of 1 is to 2 is to 4 using one part cement two parts coarse M sand and four parts graded stone aggregate of 20 mm nominal size in the foundation of DG set including excavation dressing ramming disposal of surplus soil shuttering work and providing 15 mm thick cement plaster in the ratio of 1 is to 4 using one part cement and four parts fine M sand.
Providing and fixing 25 mm X 3 mm G.I. strip on surface or in recess for connections etc. as required.
Providing and fixing 25 mm X 3 mm G.I. strip on surface or in recess for connections etc. as required.
Supplying and laying of UG cable of 1.1 KV
Supplying and laying of 4C 16 Sq.mm PVC insulated and PVC sheathed / XLPE Aluminium conductor UG cable of 1.1 KV grade direct in ground/ in pipe/ on surface of wall/ loose in panel as required.
Providing and laying 16 Sq mm PVC insulated FRLS earthing cable green including providing necessary copper sockets as required
Providing and laying 16 Sq mm PVC insulated FRLS earthing cable green including providing necessary copper sockets as required
Supplying and making end terminations
Supplying and making end terminations with brass compression gland and Aluminium lugs for the following sizes of PVC sheathed / XLPE luminium conductor UG cable of 1.1 KV grade as required----4C 16 Sq.mm
Providing maintenance free earthing arrangement
Providing maintenance free earthing arrangement with copper coated solid steel rod of 20 mm dia and 3m length, copper coated connectors and fasteners for connecting electrodes with earthing conductor/ strip i/c supplying and filling 8 Kg. earth enhancing mineral compound. The electrodes shall be hand driven or hammered into the earth.
Supply and install 8 SWG GI wire for loop earthing
S/D 8 SWG GI wire for loop earthing in the existing surface/ recessed cable as reqd.
Earthing with G.I. Eatrth pipe 1.5Mtr long by hammering of 40 mm dia including accessories as required.
Earthing with G.I. Eatrth pipe 1.5Mtr long by hammering of 40 mm dia including accessories as required.
SITC of 63 A , 4 Pole On Load Change over switch
SITCof 63 A , 4 Pole On Load Change over switch suitable for 415 Volt, 50 Hz AC supply in sheet steel enclosure , fixing the same on wall with suitable nut bolts, connections, testing, commissioning etc. as required
Dismantling of existing canopy of 7 5 15 20 and 30 KVA EA sets
Dismantling the existing canopy of 7.5/15/20/30 KVA EA set, manually loading all the dismantled parts of accoustic insulation, and control panel etc with out any damage, re-assembling the E/A set canopy ,engine, alternator, control panel with all accessories complete as required
Supplying and fixing 50 mm dia Class B MS pipes for the exhaust system of the EA set
Supplying and fixing 50 mm dia Class B MS pipes for the exhaust system of the EA set including providing suitable bends reducers coarse wire mesh cutting welding heat resistant painting etc as required
Supplying and fixing 40 mm dia A class GI pipe for cable protection and silencer support including necessary supports painting welding if required etc as required
Supplying and fixing 40 mm dia A class GI pipe for cable protection and silencer support including necessary supports painting welding if required etc as required
Painting of EA set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust ,cleaning etc complete as required
Painting of 15/30 KVA EA set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust ,cleaning etc complete as required
Supplying and laying 20 mm dia Class C MS Pipe
Supplying and laying 20 mm dia Class C MS Pipe in recess/surface for fuel line i/c cutting, welding, painting, supplying and fixing accessories,plastering etc. As required
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Dismantling and Shifting of the existing 7.5 KVA EA set | Dismantling and Shifting of the existing 7.5 KVA EA testing the EA set making good the damages to the foundation etc. as required. | 1 | nos | agmklm | 30 | |
| 2 | Dismantling and Shifting of the existing 15 and 20 KVA EA set | Dismantling & Shifting of the existing 15/20 KVA EA set with acoustic enclosure from various BTS with all accessories to a location within the BA as directed by the authority concerned incharge loading ,transportation,unloading leading to position and ITC of the shifted 15 KVA EA set with enclosure in the existing foundation at the new station, connections with the existing power and earth cables/strips, testing the EA set making good the damages to the foundation etc. as required. | 7 | nos | agmklm | 30 | |
| 3 | Dismantling and Shifting of the existing 30 KVA EA set | Dismantling & Shifting of the existing 30 KVA EA set with acoustic enclosure from various BTS with all accessories to a location within the BA as directed by the authority concerned incharge loading ,transportation,unloading leading to position and ITC of the shifted 15 KVA EA set with enclosure in the existing foundation at the new station, connections with the existing power and earth cables/strips, testing the EA set making good the damages to the foundation etc. as required. | 4 | nos | agmklm | 30 | |
| 4 | Providing and laying plain cement concrete | Providing and laying plain cement concrete in the ratio of 1 is to 2 is to 4 using one part cement two parts coarse M sand and four parts graded stone aggregate of 20 mm nominal size in the foundation of DG set including excavation dressing ramming disposal of surplus soil shuttering work and providing 15 mm thick cement plaster in the ratio of 1 is to 4 using one part cement and four parts fine M sand. | 8 | cubic meter | agmklm | 30 | |
| 5 | Providing and fixing 25 mm X 3 mm G.I. strip on surface or in recess for connections etc. as required. | Providing and fixing 25 mm X 3 mm G.I. strip on surface or in recess for connections etc. as required. | 100 | mtrs | agmklm | 30 | |
| 6 | Supplying and laying of UG cable of 1.1 KV | Supplying and laying of 4C 16 Sq.mm PVC insulated and PVC sheathed / XLPE Aluminium conductor UG cable of 1.1 KV grade direct in ground/ in pipe/ on surface of wall/ loose in panel as required. | 250 | mtrs | agmklm | 30 | |
| 7 | Providing and laying 16 Sq mm PVC insulated FRLS earthing cable green including providing necessary copper sockets as required | Providing and laying 16 Sq mm PVC insulated FRLS earthing cable green including providing necessary copper sockets as required | 75 | mtrs | agmklm | 30 | |
| 8 | Supplying and making end terminations | Supplying and making end terminations with brass compression gland and Aluminium lugs for the following sizes of PVC sheathed / XLPE luminium conductor UG cable of 1.1 KV grade as required----4C 16 Sq.mm | 20 | nos | agmklm | 30 | |
| 9 | Providing maintenance free earthing arrangement | Providing maintenance free earthing arrangement with copper coated solid steel rod of 20 mm dia and 3m length, copper coated connectors and fasteners for connecting electrodes with earthing conductor/ strip i/c supplying and filling 8 Kg. earth enhancing mineral compound. The electrodes shall be hand driven or hammered into the earth. | 10 | nos | agmklm | 30 | |
| 10 | Supply and install 8 SWG GI wire for loop earthing | S/D 8 SWG GI wire for loop earthing in the existing surface/ recessed cable as reqd. | 100 | mtrs | agmklm | 30 | |
| 11 | Earthing with G.I. Eatrth pipe 1.5Mtr long by hammering of 40 mm dia including accessories as required. | Earthing with G.I. Eatrth pipe 1.5Mtr long by hammering of 40 mm dia including accessories as required. | 10 | nos | agmklm | 30 | |
| 12 | SITC of 63 A , 4 Pole On Load Change over switch | SITCof 63 A , 4 Pole On Load Change over switch suitable for 415 Volt, 50 Hz AC supply in sheet steel enclosure , fixing the same on wall with suitable nut bolts, connections, testing, commissioning etc. as required | 3 | nos | agmklm | 30 | |
| 13 | Dismantling of existing canopy of 7 5 15 20 and 30 KVA EA sets | Dismantling the existing canopy of 7.5/15/20/30 KVA EA set, manually loading all the dismantled parts of accoustic insulation, and control panel etc with out any damage, re-assembling the E/A set canopy ,engine, alternator, control panel with all accessories complete as required | 3 | nos | agmklm | 30 | |
| 14 | Supplying and fixing 50 mm dia Class B MS pipes for the exhaust system of the EA set | Supplying and fixing 50 mm dia Class B MS pipes for the exhaust system of the EA set including providing suitable bends reducers coarse wire mesh cutting welding heat resistant painting etc as required | 10 | mtrs | agmklm | 30 | |
| 15 | Supplying and fixing 40 mm dia A class GI pipe for cable protection and silencer support including necessary supports painting welding if required etc as required | Supplying and fixing 40 mm dia A class GI pipe for cable protection and silencer support including necessary supports painting welding if required etc as required | 20 | mtrs | agmklm | 30 | |
| 16 | Painting of EA set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust ,cleaning etc complete as required | Painting of 15/30 KVA EA set with one coat of zinchromate primer and two coats of enamel paint after removing rust and dust ,cleaning etc complete as required | 5 | nos | agmklm | 30 | |
| 17 | Supplying and laying 20 mm dia Class C MS Pipe | Supplying and laying 20 mm dia Class C MS Pipe in recess/surface for fuel line i/c cutting, welding, painting, supplying and fixing accessories,plastering etc. As required | 50 | mtrs | agmklm | 30 |
Categories
95
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer