ISMB 150mm x 75mm x 5.80 mtr or beam conforming to relevant IS as per tech spec,ISMB 150mm x 75mm x
Indian Army
KUPWARA, JAMMU & KASHMIR
Bid Publish Date
07-Aug-2025, 9:41 pm
Bid End Date
18-Aug-2025, 10:00 am
EMD
₹4,20,329
Value
₹1,40,10,969
Location
Progress
RAQuantity
19719
Category
SHS 6 mm thick size 120x120mm x 2.4m long for column with holes
Bid Type
Two Packet Bid
Indian Army invites bids for Permanent Defence PD Rubik of size 2. 55m x 2. 55m o o and 2. 10 m height with thickness of interlocking hollow block 25 mm thick, HDPE laminated Sand Bag of size 75x40 cm, SHS 6 mm thick size 120x120mm x 2. 4m long for column with holes, ISMB 150 RSJ 150 x 75 mm G1 3050 mtr long for beam, ISMB 150 RSJ 150 x 75 mm G2 2. 20 mtr long for beam 2, ISMB 125 RSJ 125 x 70mm G3 0. 40 mtr long for beam, 6 mm thick MS base plate of size 150x150mm for SHS column, 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet, MS hexagonal nuts. Bolts and washers 12 mm dia 40 mm long. , LDPE sheet 3 m wide weighing 1. 00 Kg RM black in colour, Red Oxide primer conforming to relevant IS, Synthetic Enamel Paint Colour Green, Thinner Sample to be approved before supply, Dry distemper Sample to be approved before supply, Chalk whiting Sample to be approved before supply, Paint Brush 4 inch, Pre fabricated double door shutter steel door of size 1100mmx1900mm made out of 2mm thick, Supply of Swivel Bullet proof glass glass 610mm x300mmx 72 mm thick, Silicone Gel sealent of 01 pack of 400 gms including aplicator gun, Ply wood 10 mm thick for PCC form work. , Foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , SIFCON Pre Fabricated Interlocking RCC Blocks. , Aggregate 20mm. , Natural Manufactured Sand, Aggregate 40mm, Rapidite conforming to IS 1344 2018 Make Acclerex Cico Fosroc, Integrated water proofing compound. , Aluminimum straight edge 50mm squre 2mm thick 1800mm long, wooden Flat Gurmala, Water leveling pipe PVC 100 mtr, Hand Rivet Gun machine, Drill bit 6mm dia, Drill bit 8mm dia, Tape measuring metallic 30 M, Mason trowel Karchi, Tasla Iron 18 inch, Shovel with wooden handle, Axe Picks with wooden handle, Fawda with wooden handle, Crobar 5 feet long, Rammer with wooden handle of WT 5 10 KG, Sieve for sieving fine and crose AGG 900 x 1500mm made of angle iron frame with stand, Brick Hammer 1 2 Kgs, Cutting plier Insulate 6 inch, Screw Driver 12 inch with insulated plastic, Pipe Wrench 12 inch, Pipe Wrench 18 inch, Adjustable spanner 12 inch, Hacksaw frame with 2 Blade, Hand Gloves Canvas with ISI Mark, Aluminium Sprit level 6 inch, Brick Line, Plumbob in BARAMULLA, JAMMU & KASHMIR. Quantity: 19719. Submission Deadline: 18-08-2025 10: 00: 00. Submit your proposal before the deadline.
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS
Indian Army
KUPWARA, JAMMU & KASHMIR
Indian Army
SONITPUR, ASSAM
Indian Army
SONITPUR, ASSAM
Indian Army
JALPAIGURI, WEST BENGAL
Indo Tibetan Border Police (itbp)
CHANDIGARH, CHANDIGARH
Tender Results
Loading results...
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Permanent Defence PD Rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocking hollow block 25 mm thick | Permanent Defence PD Rubik of size 2.55m x 2.55m and 2.10 m height with thickness of interlocking hollow block 25 mm thick made up of high performance polymer concrete Slurry Infiltrated Fibrous Concrete SIFCON alongwith pozzolonic additives and admixture with four column of Square Hollow Section SHS including footing. PD to be construct over suitable PCC flooring of platform. It has 03 Nos of Swivel Bullet proof glass 610x300x72mm with MS Outer frame 750x500 will be provided. One double shutter steel door of size 1100mmx1900mm with 2mm thick MS Black sheet OHP with ISMB 150mmx 75mm and SRT sheets over head protection over ISMBs complete as per following specifications and shown in drawing as per Appx E Store list att as per Appx A and B. | 19 | nos | vinic@14 | 30 |
| 2 | HDPE laminated Sand Bag of size 75x40 cm | HDPE laminated Sand Bag of size 75x40 cm Sand colour and each bag having weight not less than 60 gms. | 6,783 | nos | vinic@14 | 30 |
| 3 | SHS 6 mm thick size 120x120mm x 2.4m long for column with holes | SHS 6 mm thick size 120x120mm x 2.4m long for column with holes made on the top of coln as per design fir fixing G1 Beam and a bracket of 6mm MS patti at the bottom of coln to fix 70mm x70mm SHS with nut and bolt conforming to relevant IS Make TATA SAIL JINDAL or as per Make Appx att | 4,218 | kg | vinic@14 | 30 |
| 4 | ISMB 150 RSJ 150 x 75 mm G1 3050 mtr long for beam | ISMB 150 RSJ 150 x 75 mm G1 3050 mtr long for beam conforming to relevant IS Make TATA Sail Jindal or as per make Appx att. | 38 | nos | vinic@14 | 30 |
| 5 | ISMB 150 RSJ 150 x 75 mm G2 2.20 mtr long for beam 2 | ISMB 150 RSJ 150 x 75 mm G2 2.20 mtr long for beam 2 conforming to relevant IS Make TATA Sail Jindal or as per make Appx att. | 95 | nos | vinic@14 | 30 |
| 6 | ISMB 125 RSJ 125 x 70mm G3 0.40 mtr long for beam | ISMB 125 RSJ 125 x 70mm G3 0.40 mtr long for beam conforming to relevant IS Make TATA Sail Jindal or as per make Appx att. | 190 | nos | vinic@14 | 30 |
| 7 | 6 mm thick MS base plate of size 150x150mm for SHS column | 6 mm thick MS base plate of size 150x150mm for SHS column including welding knotching cutting and nuts bolts washer etc. | 152 | nos | vinic@14 | 30 |
| 8 | 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. | 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. | 1,140 | nos | vinic@14 | 30 |
| 9 | Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet | Steel Roofing Trough SRT of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet conforming to relevant IS complete with set of a spanner OJDE of size 20 22 per 10 Nos of SRT. SRTs shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer. | 266 | nos | vinic@14 | 30 |
| 10 | MS hexagonal nuts. Bolts and washers 12 mm dia 40 mm long. | MS hexagonal nuts. Bolts and washers 12 mm dia 40 mm long. | 1,140 | nos | vinic@14 | 30 |
| 11 | LDPE sheet 3 m wide weighing 1.00 Kg RM black in colour | LDPE sheet 3 m wide weighing 1.00 Kg RM black in colour and shall contain not less than 2.0 pecentage of carbon black of an average particle size 0.01 to 0.02 micron well dispersed in mass. Sample to be approved before supply | 171 | rm | vinic@14 | 30 |
| 12 | Red Oxide primer conforming to relevant IS | Red Oxide primer conforming to relevant IS | 38 | ltr | vinic@14 | 30 |
| 13 | Synthetic Enamel Paint Colour Green | Synthetic Enamel Paint Colour Green Ist quality conforming to relevant IS of Make Johnson and Nicholson India Ltd Nerolac Paint and Asian Paint. | 76 | ltr | vinic@14 | 30 |
| 14 | Thinner Sample to be approved before supply | Thinner Sample to be approved before supply | 38 | ltr | vinic@14 | 30 |
| 15 | Dry distemper Sample to be approved before supply | Dry distemper Sample to be approved before supply | 95 | kg | vinic@14 | 30 |
| 16 | Chalk whiting Sample to be approved before supply | Chalk whiting Sample to be approved before supply | 57 | kg | vinic@14 | 30 |
| 17 | Paint Brush 4 inch | Paint Brush 4 inch Make Amar Lucky Sample to be approved before supply | 57 | nos | vinic@14 | 30 |
| 18 | Pre fabricated double door shutter steel door of size 1100mmx1900mm made out of 2mm thick | Pre fabricated double door shutter steel door of size 1100mmx1900mm o o made out of 2mm thick MS black carbon sheet welded to 30x30x6mm ISA door shutter frame fitted to 50x50x6mm ISA door frame including 06 Nos hold fast 03 Nos 125mm long MS butt hinges 02 Nos MS tower bolt 200mm long 02 Nos MS bow handle 125mm long one No MS sliding bolt 250mm long and door shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer. All materials shall conform to relevant IS Six U hooks as per design three each side shall be provided to fix the door with Rubik Blocks. | 19 | nos | vinic@14 | 30 |
| 19 | Supply of Swivel Bullet proof glass glass 610mm x300mmx 72 mm thick | Supply of Swivel Bullet proof glass glass 610mm x300mmx 72 mm thick with fabricated iron frame including necessary locking arrangement in the frame to fix the glass in the loop hole. Bullet Proof Glass Will be made with Raw Glass of ISI Specification duly processed with PVB Interlayer by using Autoclave Process strictly. The bullet proof glass should be uv Resistant 99.1percentage and follow IS 2553 Norms with Part 2 Transparency 70 percentage minimum. The glass should be capable for safegaurd and should not have perforation against three rounds fire of AK47 and SLR Rifle Calibre 7.62 mm from firing range of 10 metres and as per testing norms from Authories Govt Ballistic Testing Laboratory/Institute. The Bullet Proof Glass should not lose it visibility after having hit to first round of fire. Frame Work Made out of 16 gauge steel section for bullet resistant glass will be made square box type for size 750mm x 50mm SHS coforming to IS 4923 1987 and glass shutter shall be made of U channel of size 80mm x 40mm x 40mm x 4mm for fixing of glass with rubber bedding. The arrangement of stainless steel Hinges in window to be in centre at top & bottom portion of glass frame to rotate frame in 360 degree. Two hooks of 10250mm wide shall be provided on both the sides to fix the loopd note on Rubik blocks. | 57 | nos | vinic@14 | 30 |
| 20 | Silicone Gel sealent of 01 pack of 400 gms including aplicator gun | Silicone Gel sealent of 01 pack of 400 gms including aplicator gun | 380 | nos | vinic@14 | 30 |
| 21 | Ply wood 10 mm thick for PCC form work. | Ply wood 10 mm thick for PCC form work. | 38 | sqmm | vinic@14 | 30 |
| 22 | Foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. | Foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. | 304 | nos | vinic@14 | 30 |
| 23 | SIFCON Pre Fabricated Interlocking RCC Blocks. | SIFCON Pre Fabricated Interlocking RCC Blocks. Prefebricated RCC interlocking blocks of outer size 400x250x300mm size and hollow section inner size 360x210x300mm with thickness of slab 25 mm. The blocks to be fabricated out of high performance polymer concrete Slurry Infiltrated Fibrous Concrete SIFCON alongwith pozzolanic additives and admixtures. Curing compounds and polymers to be added to acheive desired strength and impact resistance. The compressive strength of the block M 90 Plus and weight of block less than 18 Kgs. 40 per Micro and macro reinforcement in the form of fibers to be added to increase higher energy absorption due to projectile impacts.The gap between blocks to be sealed with special penetrating coating of carbon fibre. The block to provide vertical and horizontal interlocking. | 2,717 | nos | vinic@14 | 30 |
| 24 | Aggregate 20mm. | Aggregate 20mm. Stone Aggregate to be crushed rock or gravel 20mm graded confirming to relevant IS and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out.Stone Aggregate 20 mm conforming to relevant IS 383 2016. | 41 | cum | vinic@14 | 30 |
| 25 | Natural Manufactured Sand | Natural Manufactured Sand confirming to relevant IS 383 2016 Specifications for coarse and fine aggregates. Free from adherent coating hard durable clean and shall not contain clay and impurities such iron pyrites alkalies salt coal mica shale or similar laminates or other materials exceeding the specified limits in IS code aggregates for concrete. | 26 | cum | vinic@14 | 30 |
| 26 | Aggregate 40mm | Aggregate 40mm. Stone Aggregate to be crushed rock or gravel 40mm graded confirming to relevant IS 383 2016 and shall consist or angular fragments and shall be clean hard tough durable and of uniform quality through out. | 25 | cum | vinic@14 | 30 |
| 27 | Rapidite conforming to IS 1344 2018 Make Acclerex Cico Fosroc | Rapidite conforming to IS 1344 2018 Make Acclerex Cico Fosroc | 304 | ltr | vinic@14 | 30 |
| 28 | Integrated water proofing compound. | Integrated water proofing compound. | 456 | kg | vinic@14 | 30 |
| 29 | Aluminimum straight edge 50mm squre 2mm thick 1800mm long | Aluminimum straight edge 50mm squre 2mm thick 1800mm long | 19 | nos | vinic@14 | 30 |
| 30 | wooden Flat Gurmala | wooden Flat Gurmala | 19 | nos | vinic@14 | 30 |
| 31 | Water leveling pipe PVC 100 mtr | Water leveling pipe PVC 100 mtr | 19 | mtr | vinic@14 | 30 |
| 32 | Hand Rivet Gun machine | Hand Rivet Gun machine | 19 | nos | vinic@14 | 30 |
| 33 | Drill bit 6mm dia | Drill bit 6mm dia | 38 | nos | vinic@14 | 30 |
| 34 | Drill bit 8mm dia | Drill bit 8mm dia | 38 | nos | vinic@14 | 30 |
| 35 | Tape measuring metallic 30 M | Tape measuring metallic 30 M | 19 | nos | vinic@14 | 30 |
| 36 | Mason trowel Karchi | Mason trowel Karchi | 76 | nos | vinic@14 | 30 |
| 37 | Tasla Iron 18 inch | Tasla Iron 18 inch | 38 | nos | vinic@14 | 30 |
| 38 | Shovel with wooden handle | Shovel with wooden handle | 38 | nos | vinic@14 | 30 |
| 39 | Axe Picks with wooden handle | Axe Picks with wooden handle | 38 | nos | vinic@14 | 30 |
| 40 | Fawda with wooden handle | Fawda with wooden handle | 38 | nos | vinic@14 | 30 |
| 41 | Crobar 5 feet long | Crobar 5 feet long | 19 | nos | vinic@14 | 30 |
| 42 | Rammer with wooden handle of WT 5 10 KG | Rammer with wooden handle of WT 5 10 KG | 19 | nos | vinic@14 | 30 |
| 43 | Sieve for sieving fine and crose AGG 900 x 1500mm made of angle iron frame with stand | Sieve for sieving fine and crose AGG 900 x 1500mm made of angle iron frame with stand | 19 | nos | vinic@14 | 30 |
| 44 | Brick Hammer 1 2 Kgs | Brick Hammer 1 2 Kgs | 19 | nos | vinic@14 | 30 |
| 45 | Cutting plier Insulate 6 inch | Cutting plier Insulate 6 inch | 19 | nos | vinic@14 | 30 |
| 46 | Screw Driver 12 inch with insulated plastic | Screw Driver 12 inch with insulated plastic | 38 | nos | vinic@14 | 30 |
| 47 | Pipe Wrench 12 inch | Pipe Wrench 12 inch | 19 | nos | vinic@14 | 30 |
| 48 | Pipe Wrench 18 inch | Pipe Wrench 18 inch | 19 | nos | vinic@14 | 30 |
| 49 | Adjustable spanner 12 inch | Adjustable spanner 12 inch | 19 | nos | vinic@14 | 30 |
| 50 | Hacksaw frame with 2 Blade | Hacksaw frame with 2 Blade | 19 | nos | vinic@14 | 30 |
| 51 | Hand Gloves Canvas with ISI Mark | Hand Gloves Canvas with ISI Mark | 95 | pairs | vinic@14 | 30 |
| 52 | Aluminium Sprit level 6 inch | Aluminium Sprit level 6 inch | 19 | nos | vinic@14 | 30 |
| 53 | Brick Line | Brick Line | 19 | nos | vinic@14 | 30 |
| 54 | Plumbob | Plumbob | 38 | nos | vinic@14 | 30 |
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Start
14-Sep-2025, 5:00 pm
End
15-Sep-2025, 5:00 pm
Duration: 24 hours
Reverse Auction Document
✅ RA concluded. Check financial results for final rankings.
These are the final prices after the reverse auction event. Prices may be lower than initial bids.
| Rank | Seller | Final Price | Item |
|---|---|---|---|
| L1 | ROSCHCRETE TECHNOLOGIES PRIVATE LIMITED Under PMA Winner | ₹1,77,47,088 | Item Categories : Permanent Defence PD Rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocki |
| L2 | Roto Technic Under PMA | ₹1,78,36,180 | Item Categories : Permanent Defence PD Rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocki |
| L3 | RVP TECHNICAL SERVICES Under PMA | ₹1,78,96,238 | Item Categories : Permanent Defence PD Rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocki |
🎉 L1 Winner
ROSCHCRETE TECHNOLOGIES PRIVATE LIMITED Under PMA
Final Price: ₹1,77,47,088
Sign up now to access all documents
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS