TenderDekho Logo
GEM

Contract Bidding Open For Earth work excavation,Filling of excavated earth,Surface dressing,Demolishing PCC,Demolishing RCC,D in EAST SINGHBHUM, JHARKHAND

Bid Publish Date

09-Apr-2025, 9:30 am

Bid End Date

30-Apr-2025, 12:00 pm

EMD

₹43,452

Value

₹43,45,223

Location

EAST SINGHBUM , JHARKHAND

Progress

Issue09-Apr-2025, 9:30 am
AwardPending
Explore all 5 tabs to view complete tender details

Quantity

16059

Category

RCC Column

Bid Type

Two Packet Bid

Categories 101

BLOCK WORK WIND MILL ENERGY PROJECT APPARELS PRINTING SERVICES BRIDGE CONSTRUCTION ANGLE PASTRIES TRAFFIC BARRIER BUILDING CONSTRUCTION SPOTTING SCOPE PAINTING CONSTRUCTION MATERIALS EXCAVATOR WOODEN TROLLEY WIRE FENCING FLOOR COATING PERISTALTIC PUMPS JCB HELIPAD ALUMINIUM PAINT STRUCTURAL OFFSET PRINTING ZINC SUPPLY HARDWARE AND FASTENERS ASPHALT DISTEMPER WOODEN PRODUCT STEEL BENCH STEEL TUBE STEEL WIRE SOIL EARTH SNG BARBED WIRE HYDRAULIC SHOVEL CLOTHING GI WIRE MINING ENGINEERING PRIMERS LINKERS AND ADAPTORS GOLD MEDAL STOMACHERS TRANSPORTATION EPOXY FLOORING PAINT SUPPLY SCAFFOLDING ALUMINIUM BOAT MS WIRE BLOCKS MS FLAT PAPER AND PRINTING SERVICES STEEL SHEET GALVANISED PIPE RCC BLOCK CEMENT EARTH AND STONE BRICK WORK BLACK TOPPING SURFACE BARE METAL BLOCKPRINTING PRINTMAKING PAPER BASSES BOLTS CIVIL WORK RCC WORK CONSTRUCTION MACHINERY ENAMELING PAINTS AND ACCESSORIES WIRE RCC STONE SAND SUPPLY FILLING RAIN CUT PAINTS AND PRIMERS FIBERS THREADS AND YARNS MINING EQUIPMENT END POINT SECURITY BACKHOE TRANSITION METALS ANGLE BRACKETS FABRICATOR CRUCIBLE FURNACES PLASTIC VALVE PARTS AND ACCESSORIES EXCAVATION RECIPROCATING PUMPS ESCRAP EARTH WORK SCREWS BRICK BUNDI CONCERTINA COIL HYDRAULIC PEB PAINTS BITUMEN ROAD STEEL SUPPLY EARTH MOVING NATURAL RUBBER LIME CONSTRUCTION MINERAL SHIFTING OF MATERIAL EARTH MOVER PAINTING MATERIAL TRANSPORTATION CRANE

Public procurement opportunity for Uranium Corporation Of India Limited Earth work excavation, Filling of excavated earth, Surface dressing, Demolishing PCC, Demolishing RCC, Demolishing brick work, PCC 136, PCC 124, RCC up to plinth, RCC Column, shuttering Foundation, shuttering Column, Brick upto below Plinth, Brick upto below Plinth1, Brick upto Above Plinth, Dismantling roofing, precoated galvanised Sheets, Ridges plain, Gutter, Steel reinforcement, 12 mm plaster, punning, Acrylic Smooth exterior paint, Distemper, red oxide zinc chromate primer, synthetic enamel paint, aluminium paint, water proofing cement paint, White washing, concertina coil, Structural steel in EAST SINGHBHUM, JHARKHAND. Quantity: 16059 issued by. Submission Deadline: 30-04-2025 12: 00: 00. View full details and respond.

Documents 4

GeM-Bidding-7683593.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Demolishing brick work,Brick work,Plastering,Aluminium door,Miscellaneous

National Institute Of Animal Biotechnology (niab)

Rangareddi, TELANGANA

Posted: 7 May 2025
Closed: 4 June 2025
GEM

Indian Army Construction & RCC Works Tender National 2025 ISI/BIS Compliance – 1,000,000 Est. Value

Indian Army

MUZAFFARPUR, BIHAR

Posted: 22 November 2025
Closed: 2 December 2025
GEM

Demolishing brick work,Demolishing RCC,Repairs to plaster,Grading roof,Providing and layingAPP,PCC

Uranium Corporation Of India Limited

EAST SINGHBHUM, JHARKHAND

Posted: 24 May 2025
Closed: 16 June 2025
GEM

SOIL,SAND,SOIL FILLING,CEMENT,CEMENT,CEMENT,BRICK BAT,RCC,SHUTTERING,TMT BAR,RED BRICKS,MOTAR,PAINT

Central Reserve Police Force (crpf)

Posted: 22 November 2024
Closed: 13 December 2024
GEM

Excavation,PCC,RCC,Shuttering,Steel,Brick work,Plaster,Puff panel,MS angel Structure,Electrical wor

Indian Army

PANCHKULA, HARYANA

Posted: 29 October 2025
Closed: 8 November 2025
GEM

Bill of Quantities (BOQ) 31 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Earth work excavation Earth work in excavation by mechanical means Hydraulic excavator or manual means over areas exceeding 30 cm in depth 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m as directed by EIC All kinds of soil 50 cum uciltmdcivil 365
2 Filling of excavated earth Filling available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m 10 cum uciltmdcivil 365
3 Surface dressing Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m all kinds of soil 875 sqm uciltmdcivil 365
4 Demolishing PCC Demolishing cement concrete manually or by mechanical means including disposal of material within 50 metres lead as per direction of EIC Nominal concrete 1isto 3 isto 6 or richer mix ie equivalent design mix 1 cum uciltmdcivil 365
5 Demolishing RCC Demolishing RCC work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of EIC 1 cum uciltmdcivil 365
6 Demolishing brick work Demolishing brick work manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of EIC in cement mortar 11 cum uciltmdcivil 365
7 PCC 136 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1 Cement 3 coarse sand zone III 6 graded stone aggregate 20 mm nominal size 5 cum uciltmdcivil 365
8 PCC 124 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1 Cement 2 coarse sand zone III 4 graded stone aggregate 20 mm nominal size 175 cum uciltmdcivil 365
9 RCC up to plinth Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement All work up to plinth level 1 cement 1.5 coarse sand zone-III 3 graded stone aggregate 20 mm nominal size 12 cum uciltmdcivil 365
10 RCC Column Reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth and string courses fillets columns pillars piers abutment posts and struts etc above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 cement 1.5 coarse sand zone III 3 graded stone aggregate 20 mm nominal size 3 cum uciltmdcivil 365
11 shuttering Foundation Centering and shuttering including strutting propping etc and removal of form for Foundations footings bases of columns etc for mass concrete 62 sqm uciltmdcivil 365
12 shuttering Column Centering and shuttering including strutting propping etc and removal of form for Columns Pillars Piers Abutments Posts and Struts 33 sqm uciltmdcivil 365
13 Brick upto below Plinth Brick work with common burnt clay FPS non modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 cement 6 coarse sand 7 cum uciltmdcivil 365
14 Brick upto below Plinth1 Brick work with common burnt clay FPS non modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1 cement 6 coarse sand 35 cum uciltmdcivil 365
15 Brick upto Above Plinth Brick work with common burnt clay FPS non modular bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1 cement 6 coarse sand 15 cum uciltmdcivil 365
16 Dismantling roofing Dismantling roofing including ridges hips valleys and gutters etc and stacking the material within 50 metres lead of G.S. Sheet 1,910 sqm uciltmdcivil 365
17 precoated galvanised Sheets Providing and fixing precoated galvanised iron profile sheets size shape and pitch of corrugation as approved by EIC 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by EIC The sheet shall be fixed using self drilling or self tapping screws of size 5.5 x 55 mm with EPDM seal complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required 2,235 sqm uciltmdcivil 365
18 Ridges plain Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling or self tapping screws complete Ridges plain 500 to 600mm 149 metre uciltmdcivil 365
19 Gutter Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm add 0.05 percent total coated thickness Zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to18 microns using self drilling or self tapping screws complete Gutter 600 mm over all girth 50 metre uciltmdcivil 365
20 Steel reinforcement Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level Hot rolled deformed bars 1,500 kg uciltmdcivil 365
21 12 mm plaster 12 mm cement plaster of mix 1 cement 6 fine sand Rates for external plastic are for height upto 10m from ground level in less otherwise stated 740 sqm uciltmdcivil 365
22 punning Neat cement punning 325 sqm uciltmdcivil 365
23 Acrylic Smooth exterior paint Finishing walls with Acrylic Smooth exterior paint of required shade including wire brussing rubbing and cleaning the surface throughly scaffolding and taxes all complete as per direction of EIC New work Two or more coat applied at he rate 1.67 ltr per 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per 10 sqm 1,490 sqm uciltmdcivil 365
24 Distemper Distempering with dry distemper of approved brand and manufacture one or more coats and of required shade on old work to give an even shade 150 sqm uciltmdcivil 365
25 red oxide zinc chromate primer Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron or steel works including wire brussing rubbing and cleaning the surface throughly scaffolding and taxes all complete as per direction of EIC 750 sqm uciltmdcivil 365
26 synthetic enamel paint Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including wire brussing rubbing and cleaning the surface throughly scaffolding and taxes all complete as per direction of EIC One or more coats on old work 1,875 sqm uciltmdcivil 365
27 aluminium paint Painting with aluminium paint of approved brand and manufacture to give an even shade including wire brussing rubbing and cleaning the surface throughly scaffolding and taxes all complete as per direction of Engineer in charge One or more coats on old work 125 sqm uciltmdcivil 365
28 water proofing cement paint Finishing walls with water proofing cement paint of required shade including wire brussing rubbing and cleaning the surface throughly scaffolding and taxes all complete as per direction of Engineer in charge Old work one or more coats applied at the rate 2.20 kg per 10 sqm over priming coat of primer applied at the rate 0.80 litrs per 10 sqm complete including cost of Priming coat 320 sqm uciltmdcivil 365
29 White washing White washing with lime to give an even shade including wire brussing rubbing and cleaning the surface throughly scaffolding and taxes all complete as per direction of EIC Old work one or more coats 2,335 sqm uciltmdcivil 365
30 concertina coil Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length total length 90 m having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron Y shaped placed 2.4m or 3.00 m apart and with 9 horizontal RBT reinforced barbed wire stud tied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron all complete as per direction of EIC with reinforced barbed tape RBT per Spring core 2.5mm thick wire of high tensile strength of 165 kg per sqmm with tape 0.52 mm thick and weight 43.478 gm per metre cost of MS angle CC blocks shall be paid separately 60 metre uciltmdcivil 365
31 Structural steel Structural steel work in riveted bolted or welded in build up section trusses and faramed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete 750 kg uciltmdcivil 365

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

Certificate (Requested in ATC)

2

Additional Doc 1 (Requested in ATC)

3

Additional Doc 2 (Requested in ATC)

4

Additional Doc 3 (Requested in ATC)

5

Additional Doc 4 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

6

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Frequently Asked Questions

Key insights about JHARKHAND tender market

## FAQs
What are the eligibility requirements for participation in this tender?

The eligibility requirements for this tender include being a registered entity with the necessary experience in similar construction and maintenance projects. Potential bidders should demonstrate their financial capability by providing supporting documents such as bank statements or financial audits showing their solvency. A history of successfully completed works in related fields will also strengthen the application.

What technical specifications must bidders comply with?

Bidders are expected to comply with various technical specifications outlined in the tender documents. These include standards related to earthwork, construction quality, safety protocols, and industry best practices. Additionally, evidence of possessing the required tools, machinery, and labor skillsets to execute the tasks effectively is essential. Compliance with relevant Quality Standards and regulations is mandatory.

What is the process for submitting documents and what formats are accepted?

Document submission can be made through specified online platforms as per the tender guidelines. All submissions must be in the accepted formats, typically consisting of PDF and Word document types. Bidders should ensure that all required documentation—including bid proposals, technical details, and financial statements—are thoroughly completed and uploaded before the deadline to avoid disqualification.

Are there any Earnest Money Deposit (EMD) requirements?

Yes, participants are typically required to submit an Earnest Money Deposit (EMD) along with their bids. The EMD acts as a security deposit to confirm the bidder's intent to execute the contract upon selection. The specific amount required will be outlined in the tender documents, and failure to submit the EMD as specified may lead to disqualification.

What benefits are available for Micro, Small, and Medium Enterprises (MSEs) participating in this tender?

Micro, Small, and Medium Enterprises (MSEs) are encouraged to participate through various benefits, including relaxed eligibility criteria and the potential for financial support. The tender process aims to promote inclusivity and provide opportunities for MSEs, facilitating a level playing field in the bidding process in alignment with national mandates focused on supporting small enterprises.