Government Tender Published for Radial Drilling Machine in PATAN, GUJARAT
Progress
Public procurement opportunity for Directorate Of Technical Education Radial Drilling Machine (Q3) in PATAN, GUJARAT. Quantity: 1 issued by. Submission Deadline: 08-09-2026 16: 00: 00. View full details and respond.
Tender Data
Bid Details
Quantity
1
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MII Purchase Preference
No
MSE Purchase Preference
No
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
15
OEM Avg. Turnover
12
Past Performance
80 %
Experience Required
2 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Radial Drilling Machine (Q3)
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
13
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
Patan
Delivery Pincodes
384265
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Parmar Hardik | 384265,Principal K D Polytechnic Patan Near T B Tran Rasta Patan (North Gujarat) | Patan | Gujarat | 384265 | 1 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 3
GeM-Bidding-9771088.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Categories
5
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Technical Specifications
1 Item
Item #1 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| Performance Parameter | Material which can be drill | Steel, Cast Iron, Aluminium, Copper, Nylon |
| Performance Parameter | Nature of Duty of Operation of Drill machine | Light Duty |
| Performance Parameter | Feed Range in mm/rev | 0.125 - 1.25 |
| Performance Parameter | Number of feed | 6 |
| Performance Parameter | Number of Spindle speed | 8 |
| Performance Parameter | Taper in Spindle as per IS 2582-1972 with Latest amendment | MT 3 |
| Performance Parameter | Range of Spindle Speed in Forward Direction in rev/min | 8-1000 |
| Performance Parameter | Main Motor Power in kW | 2 |
| Performance Parameter | Arm motor power in kW | 0.75 |
| Performance Parameter | Type of Cooling | Fluid cooling |
| Performance Parameter | Main Spindle Bearing confirming Pre-loaded Standard make hint: Spindle Bearing High precision class Double Row taper roller bearings at Front & Single Row taper roller bearing at back | No |
| Performance Parameter | Power supply | Three Phase Supply (415 V, 50 Hz) |
| Performance Parameter | Warranty in years | 1 |
| Performance Parameter | Coolant Pump output in kw as per IS 2161:1962 latest | 0.11 |
| Performance Parameter | Sleeve Travel Type | Manual |
| Performance Parameter | Tapping in steel - metric fine threads | M20 |
| Performance Parameter | Type of Lubrication | Oil Mist |
| Performance Parameter | Taping in cast Iron | M30 |
| Dimensional Parameter | Maximum Drill Diameter for steel in mm | 25 |
| Dimensional Parameter | Maximum Drill Diameter for cast iron in mm | 32 |
| Dimensional Parameter | Maximum Drill Diameter for non ferrous material in mm | 50 |
| Dimensional Parameter | Maximum Quill Traverse in mm | 200 |
| Dimensional Parameter | Column Sleeve Diameter in mm | 200 |
| Dimensional Parameter | Width of Arm Guide Ways in mm | 175 |
| Dimensional Parameter | Maximum Drilling Radius in mm with tolerance ± 10 mm | 1200 |
| Dimensional Parameter | Minimum Drilling Radius in mm | 500 |
| Dimensional Parameter | Maximum Length of Bed in mm with tolerances ± 50 mm | 650 |
| Dimensional Parameter | Maximum Width of Bed in mm with tolerance ± 50 mm | 200 |
| Dimensional Parameter | Maximum Drill head traverse in mm with tolerance ± 50 mm | 750 |
| Dimensional Parameter | Arm Traverse in mm with tolerance ± 30 mm | 450 |
| Dimensional Parameter | Spindle travel (drilling depth) in mm with tolerance ± 10 mm | 200 |
| Dimensional Parameter | Maximum Distance from Base plate to spindle in mm with tolerances ± 50 mm | 970 |
| Dimensional Parameter | Minimum distance from Base plate to spindle in mm | 300 |
| Dimensional Parameter | Travel of Sleeve in mm | 250 |
| Dimensional Parameter | Lead Screw Diameter in mm | 25 |
| Dimensional Parameter | Lead Screw Pitch in mm | 6 |
| Optional Accessories | Universal table for 32 mm drill capacity | No |
| Optional Accessories | Universal table for 40 mm drill capacity | No |
| Optional Accessories | Universal table for 50 mm drill capacity | No |
| Optional Accessories | Universal table for 60 mm drill capacity | No |
| Optional Accessories | Machine Vice with fixed base 80 mm clamping range 0-50 mm pull type | Yes |
| Optional Accessories | Machine Vice with fixed base 80 mm clamping range 0-50 mm push type | Yes |
| Optional Accessories | Machine Vice with fixed base 160mm clamping range 0-100 mm pull type | No |
| Optional Accessories | Machine Vice with fixed base 160 mm clamping range 0-100 mm push type | No |
| Optional Accessories | Machine Vice with fixed base 315 mm clamping range 0-200 mm pull type | No |
| Optional Accessories | Machine Vice with fixed base 315 mm clamping range 0-200 mm push type | No |
| Optional Accessories | Machine Vice with Swivel base 80 mm clamping range 0-50 mm push type | No |
| Optional Accessories | Machine Vice with Swivel base 160 mm clamping range 0-100 mm pull type | No |
| Optional Accessories | Machine Vice with Swivel base 160mm clamping range 0-100 mm push type | No |
| Optional Accessories | Machine Vice with Swivel base 315mm clamping range 0-200 mm push type | No |
| Optional Accessories | Machine Vice with Swivel base 315mm clamping range 0-200 mm pull type | No |
| Optional Accessories | Suitable Tapping Attachment drill capacity 32 mm | No |
| Optional Accessories | Suitable Tapping Attachment drill capacity 40 mm | No |
| Optional Accessories | Suitable Tapping Attachment drill capacity 50 mm | No |
| Optional Accessories | Suitable Tapping Attachment drill capacity 60 mm | No |
| Optional Accessories | Drill chuck quick change 32 mm | No |
| Optional Accessories | Drill chuck quick change 40 mm | Yes |
| Optional Accessories | Drill chuck quick change 50 mm | No |
| Optional Accessories | Drill chuck quick change 60 mm | No |
| Optional Accessories | Boring Head 32mm | No |
| Optional Accessories | Boring Head 40mm | No |
| Optional Accessories | Boring Head 50mm | No |
| Optional Accessories | Boring Head 60mm | No |
| Optional Accessories | Co-ordinate table 32 mm | NO |
| Optional Accessories | Co-ordinate table 40mm | NO |
| Optional Accessories | Box Table 32 mm | No |
| Optional Accessories | Box Table 40 mm | No |
| Optional Accessories | Box Table 50 mm | No |
| Optional Accessories | Drill drift 4 number | Yes |
| Optional Accessories | Quick indexing dividing head | NO |
| Reports | Availability of Test Report from Central Govt/NABL/ILAC acredited lab to prove Conformity to specification | NO |
| Reports | Copies of test report to be furnished to the buyer on demand at the time of supplies | No |