GEM

Contract Bidding Open For Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in DARJEELING, WEST BENGAL

Bid Publish Date

17-Jun-2026, 1:31 pm

Bid End Date

27-Jun-2026, 2:00 pm

EMD

₹77,000

Location

DARJEELING , WEST BENGAL

WhatsApp Generate Docs

Progress

Issue17-Jun-2026, 1:31 pm

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

4766

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , LED Garden Light (V2) (Q2) , Curtain Pipe, Sider and mounting bracket (Q4) , Clamp 15 mm for pipe for PVC , Clamp 20 mm for pipe for PVC , Elbow UPVC 20MM , FTA 15mm , FTA 25mm , MTA 20mm , MTA 25mm , socket 20mm UPVC , Tee 20mm UPVC , Tee 25mm UPVC , UPVC Reducer Elbow 25 x 15 mm , UPVC Brass Elbow 20 x 15 mm , UPVC Brass Elbow 25 x 15 mm , UPVC Brass Elbow 25 x 20 mm , UPVC End Cap , UPVC pipe 15 MM , UPVC pipe 20 MM , UPVC pipe 25 MM , UPVC Pipe 32 mm 3 mtr Length , UPVC Reducer Elbow 25 x 20 mm , UPVC Socket 20 mm , UPVC Socket 25 mm , PVC SWR single socket pipe of size 110mm 10 feet long , UPVC round conduit Pipe socketed 20 mm dia x 3 Mtr Length , Round Tee for UPVC round conduit Pipe socketed 20 mm dia , UPVC slip type long Bend 20 mm dia , Elbow for UPVC Round Conduit Pipe socketed 20mm Dia , Saddle Trap for UPVC round Conduit pipe 20 MM Dia

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 13

GeM-Bidding-9471997.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Indian Army Copper Alloy Taps & LED Lighting Procurement Senapati Manipur IS 8931 Q3 & IS 550 Compliant 2026

Indian Army

SENAPATI, MANIPUR

Posted: 21 March 2026

Closed: 1 April 2026

GEM

Indian Army Copper Alloy Taps and Plumbing Fixtures Tender Chamoli Uttarakhand IS 8931 IS 9763 2026

Indian Army

CHAMOLI, UTTARAKHAND

Posted: 30 March 2026

Closed: 9 April 2026

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

GORAKHPUR, UTTAR PRADESH

Posted: 10 February 2026

Closed: 20 February 2026

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

AMRITSAR, PUNJAB

Posted: 30 April 2026

Closed: 11 May 2026

GEM

Indian Army Copper Alloys Taps & Sanitary Fixtures Tender Allahabad Uttar Pradesh 2026 IS 8931 IS 9763

Indian Army

ALLAHABAD, UTTAR PRADESH

Posted: 7 March 2026

Closed: 20 March 2026

GEM

Bill of Quantities (BOQ) 28 Items Sign in to view GEM price trends Sign in for GEM prices

Clamp 15 mm for pipe for PVC

143 nos Delivery: 30 days

Clamp 20 mm for pipe for PVC

112 nos Delivery: 30 days

Elbow UPVC 20MM

200 nos Delivery: 30 days

FTA 15mm

200 nos Delivery: 30 days

FTA 25mm

170 nos Delivery: 30 days

MTA 20mm

169 nos Delivery: 30 days

MTA 25mm

173 nos Delivery: 30 days

socket 20mm UPVC

100 nos Delivery: 30 days

Tee 20mm UPVC

99 nos Delivery: 30 days

#10

Tee 25mm UPVC

100 nos Delivery: 30 days

#11

UPVC Reducer Elbow 25 x 15 mm

157 nos Delivery: 30 days

#12

UPVC Brass Elbow 20 x 15 mm

170 nos Delivery: 30 days

#13

UPVC Brass Elbow 25 x 15 mm

72 nos Delivery: 30 days

#14

UPVC Brass Elbow 25 x 20 mm

171 nos Delivery: 30 days

#15

UPVC End Cap

90 nos Delivery: 30 days

#16

UPVC pipe 15 MM

70 nos Delivery: 30 days

#17

UPVC pipe 20 MM

70 nos Delivery: 30 days

#18

UPVC pipe 25 MM

70 nos Delivery: 30 days

#19

UPVC Pipe 32 mm 3 mtr Length

50 nos Delivery: 30 days

#20

UPVC Reducer Elbow 25 x 20 mm

83 nos Delivery: 30 days

#21

UPVC Socket 20 mm

150 nos Delivery: 30 days

#22

UPVC Socket 25 mm

123 nos Delivery: 30 days

#23

PVC SWR single socket pipe of size 110mm 10 feet long

8 nos Delivery: 30 days

#24

UPVC round conduit Pipe socketed 20 mm dia x 3 Mtr Length

150 nos Delivery: 30 days

#25

Round Tee for UPVC round conduit Pipe socketed 20 mm dia

100 nos Delivery: 30 days

#26

UPVC slip type long Bend 20 mm dia

48 nos Delivery: 30 days

#27

Elbow for UPVC Round Conduit Pipe socketed 20mm Dia

180 nos Delivery: 30 days

#28

Saddle Trap for UPVC round Conduit pipe 20 MM Dia

200 nos Delivery: 30 days

Item #	Title	Description	Quantity	Unit	Consignee	Delivery (Days)
1	Clamp 15 mm for pipe for PVC	Clamp 15 mm for pipe for PVC	143	nos	bsosevokeroad	30
2	Clamp 20 mm for pipe for PVC	Clamp 20 mm for pipe for PVC	112	nos	bsosevokeroad	30
3	Elbow UPVC 20MM	Elbow UPVC 20MM	200	nos	bsosevokeroad	30
4	FTA 15mm	FTA 15mm	200	nos	bsosevokeroad	30
5	FTA 25mm	FTA 25mm	170	nos	bsosevokeroad	30
6	MTA 20mm	MTA 20mm	169	nos	bsosevokeroad	30
7	MTA 25mm	MTA 25mm	173	nos	bsosevokeroad	30
8	socket 20mm UPVC	socket 20mm UPVC	100	nos	bsosevokeroad	30
9	Tee 20mm UPVC	Tee 20mm UPVC	99	nos	bsosevokeroad	30
10	Tee 25mm UPVC	Tee 25mm UPVC	100	nos	bsosevokeroad	30
11	UPVC Reducer Elbow 25 x 15 mm	UPVC Reducer Elbow 25 x 15 mm	157	nos	bsosevokeroad	30
12	UPVC Brass Elbow 20 x 15 mm	UPVC Brass Elbow 20 x 15 mm	170	nos	bsosevokeroad	30
13	UPVC Brass Elbow 25 x 15 mm	UPVC Brass Elbow 25 x 15 mm	72	nos	bsosevokeroad	30
14	UPVC Brass Elbow 25 x 20 mm	UPVC Brass Elbow 25 x 20 mm	171	nos	bsosevokeroad	30
15	UPVC End Cap	UPVC End Cap	90	nos	bsosevokeroad	30
16	UPVC pipe 15 MM	UPVC pipe 15 MM	70	nos	bsosevokeroad	30
17	UPVC pipe 20 MM	UPVC pipe 20 MM	70	nos	bsosevokeroad	30
18	UPVC pipe 25 MM	UPVC pipe 25 MM	70	nos	bsosevokeroad	30
19	UPVC Pipe 32 mm 3 mtr Length	UPVC Pipe 32 mm 3 mtr Length	50	nos	bsosevokeroad	30
20	UPVC Reducer Elbow 25 x 20 mm	UPVC Reducer Elbow 25 x 20 mm	83	nos	bsosevokeroad	30
21	UPVC Socket 20 mm	UPVC Socket 20 mm	150	nos	bsosevokeroad	30
22	UPVC Socket 25 mm	UPVC Socket 25 mm	123	nos	bsosevokeroad	30
23	PVC SWR single socket pipe of size 110mm 10 feet long	PVC SWR single socket pipe of size 110mm 10 feet long	8	nos	bsosevokeroad	30
24	UPVC round conduit Pipe socketed 20 mm dia x 3 Mtr Length	UPVC round conduit Pipe socketed 20 mm dia x 3 Mtr Length	150	nos	bsosevokeroad	30
25	Round Tee for UPVC round conduit Pipe socketed 20 mm dia	Round Tee for UPVC round conduit Pipe socketed 20 mm dia	100	nos	bsosevokeroad	30
26	UPVC slip type long Bend 20 mm dia	UPVC slip type long Bend 20 mm dia	48	nos	bsosevokeroad	30
27	Elbow for UPVC Round Conduit Pipe socketed 20mm Dia	Elbow for UPVC Round Conduit Pipe socketed 20mm Dia	180	nos	bsosevokeroad	30
28	Saddle Trap for UPVC round Conduit pipe 20 MM Dia	Saddle Trap for UPVC round Conduit pipe 20 MM Dia	200	nos	bsosevokeroad	30

Technical Specifications 10 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Angle stop valve
Type	Dimension	As per table 5 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	6

Item #2 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Pillar tap
Type	Dimension	As per table 3 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #3 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Brass rods
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Die cast brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	6

Item #4 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Forged brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #5 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Garden Light	LED post top lantern/luminaire with pole
GENERIC	Material of Garden Lighting pole including lighting system (lantern/luminaire) (Note: Wherever GI, MS, CI materials used, materials shall be ISI Marked)	Galvanised Iron
GENERIC	Pole height inlcluding lantern/luminaire (in m)	3
GENERIC	No.of lantern/luminaire with each pole (in m)	1
LIGHT SOURCE	Type of light source - BEE star rating of LED Bulb	SMD LED Chip
LIGHT SOURCE	LED Rating in each lantern/luminaire/lighting system (in Watts)	45.0
LIGHT SOURCE	LED Lamp/System efficacy in each lantern / luminaire (in lumen / watt)	≥ 135
LIGHT SOURCE	In case of LED bulb - Cap designation of each lamp and holder in each lantern / luminaire	Not applicable (for SMP LED Chip)
PROTECTION	Automatic Lower / Higher Cut off voltage	Yes. Lower cut off 120 V, Higher cut off 300 V
PROTECTION	Protection against surges and transients - External	> / = 10 KV, No Or higher
THERMAL MANAGEMENT	Minimum Operating Temperature (in deg. C)	-10
THERMAL MANAGEMENT	Maximum Operating Temperature (in deg. C)	50
LANTERN/LUMINAIRE - CONSTRUCTION	Impact resistance on diffuser material (in IK)	7
LANTERN/LUMINAIRE - CONSTRUCTION	Protection of the entire housing (in IP) Protection of the entire housing as per IS:10322 (Part 1):1982 latest	65
LANTERN/LUMINAIRE - CONSTRUCTION	Length of ISI marked three core connecting wire (Provided along with each lantern/luminiare) - (in m)	1
CERTIFICATIONS	Warranty for free replacement of lighting systems including lightsource (in years)	1
ADVANCE SAMPLE	Agreed to provide Advance Sample(s) for buyer's approval before commencement of supply. ( hint: Applicable in case of orders placed against bid and not applicable in case of Direct Buying )	No

Item #6 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Garden Light	Bollard type with Pole and LED lantern/luminaire, Architectural design with pole and LED lantern/luminaire, LED post top lantern/luminaire with pole
GENERIC	Material of Garden Lighting pole including lighting system (lantern/luminaire) (Note: Wherever GI, MS, CI materials used, materials shall be ISI Marked)	Aluminium casting, Galvanised Iron, Mild steel, Cast iron, LED post top with out pole. Hence not applicable
GENERIC	Pole height inlcluding lantern/luminaire (in m)	0.5, 1, 1.5, 3, 4, 5, 6, 7, 8, without pole
GENERIC	No.of lantern/luminaire with each pole (in m)	1, 2, 3, 4, 5, LED post top with out pole. Hence not applicable
LIGHT SOURCE	Type of light source - BEE star rating of LED Bulb	SMD LED Chip
LIGHT SOURCE	LED Rating in each lantern/luminaire/lighting system (in Watts)	10.0
LIGHT SOURCE	LED Lamp/System efficacy in each lantern / luminaire (in lumen / watt)	≥ 120 and < 135
LIGHT SOURCE	In case of LED bulb - Cap designation of each lamp and holder in each lantern / luminaire	Not applicable (for SMP LED Chip)
PROTECTION	Automatic Lower / Higher Cut off voltage	Yes. Lower cut off 120 V, Higher cut off 300 V
PROTECTION	Protection against surges and transients - External	> / = 10 KV, No Or higher
THERMAL MANAGEMENT	Minimum Operating Temperature (in deg. C)	-10
THERMAL MANAGEMENT	Maximum Operating Temperature (in deg. C)	50
LANTERN/LUMINAIRE - CONSTRUCTION	Impact resistance on diffuser material (in IK)	7
LANTERN/LUMINAIRE - CONSTRUCTION	Protection of the entire housing (in IP) Protection of the entire housing as per IS:10322 (Part 1):1982 latest	65
LANTERN/LUMINAIRE - CONSTRUCTION	Length of ISI marked three core connecting wire (Provided along with each lantern/luminiare) - (in m)	0.5
CERTIFICATIONS	Warranty for free replacement of lighting systems including lightsource (in years)	1
ADVANCE SAMPLE	Agreed to provide Advance Sample(s) for buyer's approval before commencement of supply. ( hint: Applicable in case of orders placed against bid and not applicable in case of Direct Buying )	No

Item #7 Details

View Catalog

Category	Specification	Requirement
ITEM	ITEM	Curtain Pipe with Sider and hanging bracket
OTHER REQUIREMENTS	Sider(one pair per pipe)	With
DIMENSON	Outside Diameter of curtain pipe (in mm)	19mm
DIMENSON	Length of curtain pipe( In Meter)	1
DIMENSON	Minimum Wall thickness of pipe ( In MM)	1, 2, 3, 4, 5 Or higher
DIMENSON	Minimum thickness of Curtain pipe hanging bracket (in mm)	2, 3 Or higher

Item #8 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Garden Light	LED post top lantern/luminaire with pole
GENERIC	Material of Garden Lighting pole including lighting system (lantern/luminaire) (Note: Wherever GI, MS, CI materials used, materials shall be ISI Marked)	LED post top with out pole. Hence not applicable
GENERIC	Pole height inlcluding lantern/luminaire (in m)	without pole
GENERIC	No.of lantern/luminaire with each pole (in m)	LED post top with out pole. Hence not applicable
LIGHT SOURCE	Type of light source - BEE star rating of LED Bulb	SMD LED Chip
LIGHT SOURCE	LED Rating in each lantern/luminaire/lighting system (in Watts)	30.0
LIGHT SOURCE	LED Lamp/System efficacy in each lantern / luminaire (in lumen / watt)	≥ 105 and < 120
LIGHT SOURCE	In case of LED bulb - Cap designation of each lamp and holder in each lantern / luminaire	Not applicable (for SMP LED Chip)
PROTECTION	Automatic Lower / Higher Cut off voltage	Yes. Lower cut off 120 V, Higher cut off 300 V
PROTECTION	Protection against surges and transients - External	> / = 10 KV Or higher
THERMAL MANAGEMENT	Minimum Operating Temperature (in deg. C)	-10
THERMAL MANAGEMENT	Maximum Operating Temperature (in deg. C)	50
LANTERN/LUMINAIRE - CONSTRUCTION	Impact resistance on diffuser material (in IK)	7
LANTERN/LUMINAIRE - CONSTRUCTION	Protection of the entire housing (in IP) Protection of the entire housing as per IS:10322 (Part 1):1982 latest	65
LANTERN/LUMINAIRE - CONSTRUCTION	Length of ISI marked three core connecting wire (Provided along with each lantern/luminiare) - (in m)	0.5
CERTIFICATIONS	Warranty for free replacement of lighting systems including lightsource (in years)	1
ADVANCE SAMPLE	Agreed to provide Advance Sample(s) for buyer's approval before commencement of supply. ( hint: Applicable in case of orders placed against bid and not applicable in case of Direct Buying )	No

Item #9 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Garden Light	Bollard type with Pole and LED lantern/luminaire, Architectural design with pole and LED lantern/luminaire, LED post top lantern/luminaire with pole
GENERIC	Material of Garden Lighting pole including lighting system (lantern/luminaire) (Note: Wherever GI, MS, CI materials used, materials shall be ISI Marked)	Aluminium casting, Galvanised Iron, Mild steel, Cast iron, LED post top with out pole. Hence not applicable
GENERIC	Pole height inlcluding lantern/luminaire (in m)	0.5, 1, 1.5, 3, 4, 5, 6, 7, 8, without pole
GENERIC	No.of lantern/luminaire with each pole (in m)	1, 2, 3, 4, 5, LED post top with out pole. Hence not applicable
LIGHT SOURCE	Type of light source - BEE star rating of LED Bulb	SMD LED Chip
LIGHT SOURCE	LED Rating in each lantern/luminaire/lighting system (in Watts)	18.0
LIGHT SOURCE	LED Lamp/System efficacy in each lantern / luminaire (in lumen / watt)	≥ 105 and < 120
LIGHT SOURCE	In case of LED bulb - Cap designation of each lamp and holder in each lantern / luminaire	Not applicable (for SMP LED Chip)
PROTECTION	Automatic Lower / Higher Cut off voltage	Yes. Lower cut off 120 V, Higher cut off 300 V
PROTECTION	Protection against surges and transients - External	> / = 10 KV Or higher
THERMAL MANAGEMENT	Minimum Operating Temperature (in deg. C)	-10
THERMAL MANAGEMENT	Maximum Operating Temperature (in deg. C)	55
LANTERN/LUMINAIRE - CONSTRUCTION	Impact resistance on diffuser material (in IK)	0
LANTERN/LUMINAIRE - CONSTRUCTION	Protection of the entire housing (in IP) Protection of the entire housing as per IS:10322 (Part 1):1982 latest	65
LANTERN/LUMINAIRE - CONSTRUCTION	Length of ISI marked three core connecting wire (Provided along with each lantern/luminiare) - (in m)	0.5
CERTIFICATIONS	Warranty for free replacement of lighting systems including lightsource (in years)	2
ADVANCE SAMPLE	Agreed to provide Advance Sample(s) for buyer's approval before commencement of supply. ( hint: Applicable in case of orders placed against bid and not applicable in case of Direct Buying )	No

Item #10 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC)

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Similar Tenders

5 found

Indian Army Copper Alloy Taps/Valves Procurement IS 8931 IS 781 2026

Indian Army

📍 FAIZABAD, UTTAR PRADESH

EMD: ₹1.0 L

⏰ Deadline: 2 weeks left

🛒 Type: Goods

View GEM

Indian Army Copper Alloy Taps & Accessories Tender India 2026 IS 8931 IS 9763 EMD ₹94500

Indian Army

📍 ALLAHABAD, UTTAR PRADESH

EMD: ₹94,500

⏰ Deadline: 2 weeks left

🛒 Type: Goods

View GEM

Urgent

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Bathroom Water Shower (V2),Towel Rail,Copp

Indian Army

📍 PATIALA, PUNJAB

EMD: ₹2.9 L

⏰ Deadline: 6 days left

🛒 Type: Goods

View GEM

Urgent

1.5-inch CPVC,1 inch Clamp CPVC,1 inch Elbow Cpvc,1 inch FTM,1 inch MTF,1 inch Tee cpvc,2 inches Br

Indian Institute Of Astrophysics (iia)

📍 DINDIGUL, TAMIL NADU

Est: ₹3.3 L

⏰ Deadline: 2 days left

🛒 Type: Goods

View GEM

Flexible wire copper TC,PVC copper wire 1.5Sqmm SC,Thread tape,PVC Gutka assorted size,Butt Hinge s

Assam Rifles

📍 SONITPUR, ASSAM

Est: ₹2.0 L

⏰ Deadline: 3 weeks left

🛒 Type: Goods

View GEM

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

Categories 4 available

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Unlock Tender Documents

Performance Analytics

7-metric analysis with year-wise breakdown

Competitor Intelligence

Multi-dimensional analysis across 6 parameters

Market Penetration

By department, ministry, geography & category

Historical Analysis

Complete tender history with results

Documents 13

GeM-Bidding-9471997.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Browse Tenders

Categories

States

Cities

Authorities

Contract Bidding Open For Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in DARJEELING, WEST BENGAL

Categories 23

Additional Tender Data

Commercial Details

Authority Records

BID & GeM Expert Consultancy

Documents 13

GeM-Bidding-9471997.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

BOQ Document

BOQ Document

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Indian Army Copper Alloy Taps & LED Lighting Procurement Senapati Manipur IS 8931 Q3 & IS 550 Compliant 2026

Indian Army Copper Alloy Taps and Plumbing Fixtures Tender Chamoli Uttarakhand IS 8931 IS 9763 2026

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army Copper Alloys Taps & Sanitary Fixtures Tender Allahabad Uttar Pradesh 2026 IS 8931 IS 9763

Bill of Quantities (BOQ) 28 Items Sign in to view GEM price trends Sign in for GEM prices

Technical Specifications 10 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Similar Tenders

Indian Army Copper Alloy Taps/Valves Procurement IS 8931 IS 781 2026

Indian Army Copper Alloy Taps & Accessories Tender India 2026 IS 8931 IS 9763 EMD ₹94500

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Bathroom Water Shower (V2),Towel Rail,Copp

1.5-inch CPVC,1 inch Clamp CPVC,1 inch Elbow Cpvc,1 inch FTM,1 inch MTF,1 inch Tee cpvc,2 inches Br

Flexible wire copper TC,PVC copper wire 1.5Sqmm SC,Thread tape,PVC Gutka assorted size,Butt Hinge s

Explore More Opportunities

Unlock Tender Documents

Documents 13

GeM-Bidding-9471997.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

BOQ Document

BOQ Document

GEM General Terms and Conditions Document

Documents

Unlock All Documents

GeM-Bidding-9471997.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

BOQ Document