Science And Technology Department Bihar Furniture Tender 2026 Sheikhpura Bihar IS 3312 ISI/AAA standards
Science And Technology Department
SHEIKHPURA, BIHAR
Posted:
12 January 2026
Closed:
22 January 2026
GEM
GEM
Invitation to Bid - Almirah Med with Shelves,Bath Mat,Chair Easy,Chair Writing,Charpoy MS Rectangular Pipe with Ply woo
Bid Publish Date
29-Jan-2026, 11:02 am
Bid End Date
09-Feb-2026, 12:00 pm
EMD
₹21,000
Value
₹6,89,755
Progress
Issue29-Jan-2026, 11:02 am
AwardPending
Quantity
104
Category
Chair Dinning
Bid Type
Two Packet Bid
Indian Army announces a tender for Almirah Med with Shelves, Bath Mat, Chair Easy, Chair Writing, Charpoy MS Rectangular Pipe with Ply wood top, Table 3 feet x 2 feet with drawer, Teapoy, Chair Dinning, Receptacle large with bucket, Table Dining 08 pes, Table 2 feet high wooden, Table cook house with aluminium top, Chair executive, Chair adjustable revolving with arm, Rack side 3 spaces, Stool Steel 2 feet High, Table Office officer Steel, Chair CB Steel with arms, Almirah Large with shelf, Table ofice Clerk Steel, Peg Set of Six, Peg Set of three, Mirror 355X484 mm with self, Locker Bed Side Steel, Board Notice 900X600MM, Bath Mat Wooden, Bed with ply wood with MNF Set, Peg table, Sofa Set four Seater, Table bed side, Table Centre, Table 3 feet x 2 feet with Drawer, Table dressing Gents, Book Rack with sliding glass wooden, Almirah medium wooden. Quantity: 104. Submission Deadline: 09-02-2026 12: 00: 00. Last date to apply is approaching fast!
Documents 5
GeM-Bidding-8831825.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Sofa Set 3-seater leatherette all over with cloth thick 1.4mm steel frame and min 15mm SS pipe side
Indian Army
SAHARANPUR, UTTAR PRADESH
Posted:
30 December 2025
Closed:
20 January 2026
GEM
Indian Army West Delhi Furniture Tender IS 3312 Steel Almirah Chairs ISO 9001 2026
Indian Army
SOUTH WEST DELHI, DELHI
Posted:
7 January 2026
Closed:
17 January 2026
GEM
Table computer FD E6 MAP 03,Chair dining FD 279,Bed Hard steel FD E6 MAP 08R,Chair Easy FD-229,Chai
Indian Army
GORAKHPUR, UTTAR PRADESH
Posted:
6 January 2026
Closed:
16 January 2026
GEM
Western Railway Wood Furniture Tender 2025: ISI/ISO Selections for Wooden Book Case, Executive Table, Chairs and Storage
Western Railway
VADODARA, GUJARAT
Posted:
25 December 2025
Closed:
16 January 2026
GEM
Tender Results
Loading results...
Bill of Quantities (BOQ)
36 Items
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Almirah Med with Shelves | Almirah Med with Shelves. Overall size shall be 1270mm high,765mm wide and 440mm deep. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg. A steel chromium plated handle 100mm long shall be provided to the shutter. The locking device shall be three way locking device and shall also be provided with decorative key plate . All steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey paint internally and extrenally with spray machine after preparation of surfaces. Painting shall be done with spray machine. Drg No FD 10332 | 4 | nos | ageemnorth@1 | 60 |
| 2 | Bath Mat | Bath Mat. Overall size shall be 700mm long.450mm wide and 80mm high.All wood shall be of first class hard wood teak(MP).Six batterns 50mmx20mm in section of teak wood equally spaced with end battens projecting 6mm on either side in 450mm width.Three bases of wood support made to shape out of 65mmx25mm shall be provide as shown in drawing.Battens shall be fixed to base from bottom with brase screws.All wood surfaces exposed to view when placed in position shall be painted with two coats of white enamel paint over a coat of primer after preparation of surfaces. Drg No FD 254,14,205 | 1 | nos | ageemnorth@1 | 60 |
| 3 | Chair Easy | DIChair Easy. Overall size shall be 510 mm long, 575mm wide and 740mm high. All wood shall be first class teak (MP). Front legs shall be 30mmx55mm in section and 355mm high up to seat level. Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak wood to form the frame Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern. PVC shoes 25mmx25mm shall be provided at the bottom of all legs. All wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer finish. Drg No FD 229 | 2 | nos | ageemnorth@1 | 60 |
| 4 | Chair Writing | Chair Writing . The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat of primer.Rest all specifications are as per drg and directed by Engr-In-Charge. Drg No FD 280 | 2 | nos | ageemnorth@1 | 60 |
| 5 | Charpoy MS Rectangular Pipe with Ply wood top | Charpoy MS Rectangular Pipe with Ply wood top. Overall size shall be 1980mm long,900mm wide and 440m high.Two long rails and two short rails shall be of 25mm x 65mmx 16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant betwen tow opposite long rails.Six number cleat of size 25mmx60mmx6mm shall be welded with frame to supoort ply.Two stiffeners joining legs of 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails.Six number cleat of size of 25mmx60mmx6mm shall be provided at 150mm from ground level.12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt.one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. PVC hard rubber shoes shall be fixed at bottom of each leg.All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer. Rest all as per drg. Drg No FD 220 | 14 | nos | ageemnorth@1 | 60 |
| 6 | Table 3 feet x 2 feet with drawer | Table 3 feet x 2 feet with drawer. Over all size of 900x760x600 mm with Four legs each leg height of 760mm with Top and one Tube MS Covered with between four legs size of 25 MS Tube 1.6mm TM Stiffering along with Drawer of 25 MS Tube 1.6mm TH Top Rails which 1.0mm TH for For drawer ,1.6mm TH Flat Iron 50 wide masde to shape welded to Outer Sheet. Drg No FD 283,231 | 2 | nos | ageemnorth@1 | 60 |
| 7 | Teapoy | Teapoy wooden 600x450x540mm. The overall size shall be 600mm long, 450mm wide and 540mm high. The legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood.5mmx5mm in section groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs. A centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg.25mm thick and 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. Top of the table shall be of 18mm thick prelaminated MDF board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of top. All wood surfaces shall be French polished with high gloss finish. Rest all as per drg. Drg No FD 382,34,278 | 2 | nos | ageemnorth@1 | 60 |
| 8 | Chair Dinning | Chair Dinning. Overall size shall be 890mm high, 440mm wide and 430mm deep. The size of the legs shall be 30x55mm .Front and side rails shall be of size 30x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.One stiffener of size 40mmx40mm shall be fixed in between the two opp rails of the seat for providing extra support to PVC seat. PVC seat 4mm thick of PPCP material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws. The height of the seat shall be at 460mm high from ground. The size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs. All wood surfaces shall be lacquer polished with high gloss finish of natural shade. Rest all as per drg. Drg No FD 203/279 | 7 | nos | ageemnorth@1 | 60 |
| 9 | Receptacle large with bucket | Receptacle large with bucket. Overall size shall be 420mm dia and 510mm high.The body shall be of 1mm thick GI(Galvanized Iron) .Circular sheet of 405 mm dia.Bottom of circular sheet boday shall have 25mmx4mm flat iron band welded to 1mm thick circular sheet.95mm x50mm dia foot rest 3m thick cut to shape shall be welded to 25mmx4mm flat iron lever whose fulcrum shall be in the centre of circular body supported by 25mmx3mm flat iron made to V-Shape and welded to circular sheet body in such a way that 6mm dia loose rivet shall be provided in centre to hold and support fulcrum. The other end of lever shall be fixed to 25mm x 4mm vertical lever hanged at bottom and top 3 dia pin.The other end of vertical lever shall be attached mild stetel reinforcement sheet of 175mmx100mm welded to cover to enable cover to open when the pressure shall be put on the top of foot rest at bottom lever.Top cover shall be of 1mm thick GI sheet cover 420mm dia and bend inside cover 3mm dia wire all-round the cover.Two numbers brackets made to shape out of 3mm thick mild steel sheet as reinforcementsheet,welded to cover,enables the cover to open.Bucket shall be made of 1mm thick GI sheet 340mm dia at top and 210mm dia at bottom .Top of bucket shall have 2 numbers bracket 50mmx65mmx3mm thick flat iron welded to bucket for holding 10mm dia mild steel bar handle. 40x3mm mild steel flat iron ring shall be provided at bottom of bucket. 10mm dia mild steel bar handle shall be provided to bucket.All steel surfaced ,except galvanized iron surfaces,shall be given two coats of aluminium paint over cost of primer after preparation of surfaces. Drg No FD 43/1044 FD 43/1044 | 4 | nos | ageemnorth@1 | 60 |
| 10 | Table Dining 08 pes | Table Dining 08 pes. Overall size shall be 1800mm long,900mm wide and 760mm high.All wood shall be of first class together at the top of legs by 25mmx100mm in section top rail provided in long and shor sides.5mmx5mm in section vertical groove shall be provided in the middle in the visible two sides of all legs when placed positition .Eight numbers,25mmx3mm flat iron 200mm long bent to right angle shape corners shall be provided at all the junction of top rails meeting wise leg.Wooden corners shall be provided in side board,19mm thick with teak veneer shade at top and plag white on orther side shall be provided as top of the table. 25mmx40mm teak wood edging shall be provided all round the top edges of the table.All wood surfaces exposed to view when placed in position shall be French polish with lacquer finish as directed by Engineer in charge. Drg No FD 239/273 | 1 | nos | ageemnorth@1 | 60 |
| 11 | Table 2 feet high wooden | Table 2 feet high wooden. Overall size of 510x305x245mm with four legs with top covered ,the wooden shall be furnished with teak wood material ,rest with diagram | 2 | nos | ageemnorth@1 | 60 |
| 12 | Table cook house with aluminium top | Table cook house with aluminium top. Over all size shall be 900mm long.540mm wide and 840mm high.All wood shall be of first class hard wood teak(MP).Legs shall be 35mmx60mm in section and 815mm high.The legs shall be joined together be 35mmx60mm in section and 815mm high .The legs shall be joined together at top level of legs with 25mmx75mm in section top rails in short and long sides.The top rails of long sides shall be joined in the middle by a stiffener of 50mmx25mm in section teak wood.The top rails of short sides shall be joined in the middle by a stiffener 25mmx50mm in section.joining legs in short sides at 100mm from bottom legs.A long stiffener joining the short stiffeners.Four numbers 6mm dia mild steel lugs of 35mm long shall be provided on the top of all legs in such a way that 25mm shalll be in the legs and 10mm protrudes and insert in the 25mm thick polished stone top. The top shall be of 25mm thick polished stone slab in one piece as directed by Engineeer-in-Charge regarding the type of stone,that is ,Kotah or Shahabad or Kudappa or Chittor black or Dholpur.The polished stone slab shall project 25mm long in long and short sides.All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Drg No FD 1019/297/497 | 1 | nos | ageemnorth@1 | 60 |
| 13 | Chair executive | all as per diagram and specifications | 1 | nos | ageemnorth@1 | 60 |
| 14 | Chair adjustable revolving with arm | all as per diagram and specifications | 7 | nos | ageemnorth@1 | 60 |
| 15 | Rack side 3 spaces | Rack side 3 spaces. Overall size shall be 840mm long,355mm wide and 810mm high,Four mild steel angle iron 40mmx40mmx3mm shall be provided as legs and shall be 810mm high.The middle shelf shall be equally spaced between top and bottom shelves.The thickness of sheet shall be 1mm .Top shelf shall have three compartments or spaces equally spaced with 50mm high partition and back covering with mild steel sheet 1mm thick. All steel surfaces exposed to view when placedin postition shall be given two coast of enamel paint over a coat pf preparation of surfaces.Painting shall be done with spray machine. Drg No FD 106,97(M) | 5 | nos | ageemnorth@1 | 60 |
| 16 | Stool Steel 2 feet High | Stool Steel 2 feet High. Over all sie shall be 305mm long,305mm wide and 760mm high.Stool shall be made out of 1mm thick mild steel sheet as shown on drawing.Legs shall be of angular frame.Bottom stiffeners shall be of 1mm thick sheet and of angular shape. Top shall be of plain sheet .All Steel and iron surfaces exposed to view when placed in position shall be painted wiith two coats of enamel paint over a coat of primer after preparation of surfaces,Tint of paint shall be directed by GE.Painting shall be done with spray machine. Drg No FD 81 (M) | 1 | nos | ageemnorth@1 | 60 |
| 17 | Table Office officer Steel | Table Office officer Steel. Overall size shall be of 1680x70x760mm. 25mm MS Square tube 1.6mm thick shall be provide to frame 1mm thick MS sheet nominal all around for drawer.Top shall be of 18mm thick pre-launched MDF board ISI Mark (exterior gde) one side decorative finish approved by GE and 4mm thick teak wood edging all around shall be provided for top.Three drawers shall be provided on right hand sides of table .A cupboard with front openable door shall be provided on the left side of the table .A shelf shall also be provided at the middle of cupboard .All sheet for drawers shelf and cupboard and back covering shall be 1mm thick. Hard rubber shoes shall also be provided to the bottom of legs.Rest all as per drgs. All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and externally with spray machine after preparation of surfaces .A mark of MES shall also be provided on top left corner of front shutter with visible colour.Painting shall be done with spray machine. Rest all as per drg. Drg No FD 84(M)/1003 | 1 | nos | ageemnorth@1 | 60 |
| 18 | Chair CB Steel with arms | Chair CB Steel with arms. Overall size shall be 535mm wide,560mm deep and 900mm high. Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 25mm dia mild steel tubing having wall thickness 1.6mm Welding of frame where required shall be as directed by GE and in running welding grinded to give smooth surface.The seat and back frame of the chair shall be made up of quality teak wood in natural polish with polythene cane in godrej pattern confirming to IS-5378 94(Type-I) of durable quality .The wooden seat frame shall be further supported by steel strips measuring 19mm x 3mm at the front and the rear and each strip shall be welded to ERW frame.The seat and back shall be fixed by providing suitable nut bolts and washers..The arms shall be of PPCP material in lieu of teak wood and shall be fixed with screws from beneath. Weaving in teak wood seat and back shall be done with plastic cane in godrej pattern. Cane shall be 2mm wide and 0.4mm thick, Gola type weighing not less than 6 gms/10 RM..Bottom of legs shall have hard rubber shoes. All iron surfaces exposed to direct view shall be stove enamelled painted with two coats of enamel grey paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieve smooth surfaces. Drg No FD 75 (M) | 3 | nos | ageemnorth@1 | 60 |
| 19 | Almirah Large with shelf | Almirah Large with shelf Overall size shall be 1985mm high,920mm wide and 485mm deep. The base shall be made o ftwo numbers mild steel sheet channel bases made in U Shaped with ends covered.Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be upto full width of 485mm and shall be 100mm high Top,sides bottom and back of almirah shall be of 1mm thick mild steel sheet.Four shelves equally spaced of 1mm thick mild steel shall be provided to make five compartments.Front shutter shalll have two leaves of equal size Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung.Alll joints,welding and fixing shall be done in accordance with the standard workmanship.Rest all as per drg. One chromium plated steel handle with a locking device shall be provided as shown on drawing. The locking device shall be three way locking device and shall also be provided with decorative key plate.All steel surfaces exposed to view when placed in position shalll be painted with two coats of smoke grey paint internally with spray machine after preparation of surfaces. Painting shall be done with spray machine. Drg No FD 1031/351 | 4 | nos | ageemnorth@1 | 60 |
| 20 | Table ofice Clerk Steel | Table ofice Clerk Steel. Over all Size of 1500x750x750mm of Outer Size . Top made of 18mm thick superior quality pre laminated particle board of Grade II Type II Confirming to IS 12823,The edges of the Table shall be banded with PVC strip 2mm thick using hot melt glue under heat and pressure ,The table top shall be supported by 1mm thick M.S C frame stiffener of size 24.2mm (W)x38mm(H) .The table shall have 4 legs made of electric resistant welded prime qulaity CRCA steel square tubulur frame of 25.4 mm size and of 1.2mm thickness. Drg No FD 84(M)/1004 | 5 | nos | ageemnorth@1 | 60 |
| 21 | Peg Set of Six | Peg Set of Six. All as shown on drawing.Overall size shalll be 910mm long.75mm high and 75mm high and 75mm deep.Wood shall be of teak wood(MP) of size 910mm long,75mm high and 19mm thick.Brass pegs six numbers shall be fixed on the wooden plank with brass screws.End pegs shall be fixed on the wooden ends.The intermediate pegs shall at pegs shall be fixed at 80mm from wooden ends.The intermediate pegs shall be at 150mm center to center.All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish after preparation of surfaces as directed by GE.The base of metal pegs shall be of oval shape 30mm wide 30mm high and 3mm thick.Pegs hook shall be 80mm high.Top end of hook shall be 60mm from the base.Key plate shall be of 25mmx40mm and 3mm thick of mild steel made to shape as shown on drawing.All steel and iron surfaces exposed to view when placed in position shall two coats of enamel paint over a coat of primer after preparation of surface. Painting shall be done with spray machine. Drg No FD 80/253 | 7 | nos | ageemnorth@1 | 60 |
| 22 | Peg Set of three | Peg Set of three. Over all Size of 25x30x300 Long with Aliminium Flat ,and the Block Embeded in Wall,and the wooden size is made up of Teak Wood. Drg No FD 80/253 | 1 | nos | ageemnorth@1 | 60 |
| 23 | Mirror 355X484 mm with self | Mirror 355X484 mm with self. Over all size of 600mm long and 230mm wide .Shelf shall be 19mm thick block board commercial with 1.5mm thick plastic laminated sheet fixed on top.4mm thick teak wood edging shall be provided at all round top of shell except back touching plaster.Shelf shall be fixed on walls.Fixing shall not be done by contractor.Mirror shall be of 355mm wide and 455mm high.25mmx19mm teak wood frame shall be provided all round the mirror.Mirror shall be of 5.5mm thick float glass of Modi Guard provided with 6mm thick commercialy plywood (BWP) backing.Teak wood beading out of 12mmx12mm in section cut to shape and fixed 12mm thick at bottom and sloping on sides.3mm thick mild steel key plates as shown on drawing shall be provided on top corners at the back of mirro.All wood surfaces exposed to view when placed in position shall be French polished with gloss finish. Drg No FD 52 | 2 | nos | ageemnorth@1 | 60 |
| 24 | Locker Bed Side Steel | Locker Bed Side Steel. The overall size of the table bed side 450mm x 450mm x 500mm (front) and 650mm H in rear as shown in drg. The frame shall be of 18mm square hollow pipe of 18 gauge. It shall be made up of BWR plywood of grade A of specified thickness as per drg in lieu of prelaminated particle board. 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of drawers. Each drawer shall be provided with 2 x Nos of stainless steel telescopic channels. Drawer shall be provided with 100mm long 8mm dia chrome plated handles Rest all specifications and dimensions are as per drg All metal surface shall be dry powder coated in black and all unlaminated surfaces shall be polished in satin/mat melamine finish of walnut shade after preparation of surfaces. Drg No FD -127/1029 | 12 | nos | ageemnorth@1 | 60 |
| 25 | Board Notice 900X600MM | Board Notice 900X600MM. Over all size shall be 1830mm long and 150mm deep and 1220mm high. 25mmx75mm Teak wood frame with 6mm Thick MDF edging all-round shall be provided as shown on drawing.19mm thick soft wood shall be fixed in side frame over which best quality green baize cloth shall be fixed as shown on drawing.On thick soft wood board shall be fixed in side the frame over which best quality green baize cloth shall be fixed on drawing.On front side 22mmx10mm aluminium channel shall be provided in side of particle board frame to house 4mm thick glass shutter .Rest all as per drg. All wooden expose surfaces shall be french polished two coats after preparation of surfaces.All Dimensions shape and size shall be followed as per drg.All joints,fixing shall be done in accordance with standard specifications.Rest all as shown on drg. Drg No FD 99 (M)/112/1042 | 1 | nos | ageemnorth@1 | 60 |
| 26 | Bath Mat Wooden | Bath Mat Wooden. Overall size shall be 700mm long.450mm wide and 80mm high.All wood shall be of first class hard wood teak(MP). Six batterns 50mmx20mm in section of teak wood equally spaced with end battens projecting 6mm on either side in 450mm width.Three bases of wood support made to shape out of 65mmx25mm shall be provide as shown in drawing.Battens shall be fixed to base from bottom with brase screws. All wood surfaces exposed to view when placed in position shall be painted with two coats of white enamel paint over a coat of primer after preparation of surfaces. | 1 | nos | ageemnorth@1 | 60 |
| 27 | Bed with ply wood with MNF Set | Overall size1980x900x600mmTheheadboard tow vertical membes of teak wood constituting legs upto400mm high head board vertical sides of 60x30mm in sec upto 260mm from top of head board joined by horizontal members of teak 30x60mm in sec,one at top and another at 400mm from top of head board of teak wood. legs 60x60mm in sec at 400mm from bottom of legs and 30x30mm in sec at bottom of legs of teakwood. square sec up to 200mm from top of horizontal rails towards the bottom of legs head board project 260mm above long rails.head board have 22x75mm in sec soft Wood, 3 in numbers ,equally spaced and joining top and bottom horizontal rails of head board.4mm thick teak plywood face on one side and other commercial provided on the both sides of head covering the soft woodbattens. p.The top and bottom horizontal rails of 30x60mm in sec and of teak wood.The vertical legs above horizontal rails of bed of 30x60mm in sec which forming part of legs of teak wood .4mm thick teak plywood one side teak face and other side commercial provided on both sided of foot board covering the soft wood the soft wood battens.The joints of teak plywood and teak of foot board covered with 12mm dia half cut teak wood beads on both sides of the foot board.The long rails and short rails have a rebate of 12x20mm for fixing of 12mm thick commerical plywood. 2teak wood stiffeners of 40x60mm in section provided equally spaced joining long rails.12mm thick commerical plywood both faces provided to form as hard bed top.35x5mm flat iron of mild steel bent to right angle provided on four corners of hard bed.MNF set of 19mm squard tube of wall thickness 1.6mm provided in T shape. TAll teak wood French polished with high gloss finish. MNF set surfaces and steel surfaces painted with two coats of black paint over a coat of printer after preparation of surfaces. Drg No FD 205,246/247 (Note . Please go through with item specification document for exact specification of this item) | 1 | nos | ageemnorth@1 | 60 |
| 28 | Chair Writing | Chair Writing . The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat of primer.Rest all specifications are as per drg and directed by Engr-In-Charge Drg No FD 280 | 2 | nos | ageemnorth@1 | 60 |
| 29 | Peg table | Peg table. Overall size shall be 450mm long,300mm wide and 380mm high. Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of table shall be of 18mm thick prelaminated MDF board of approved shade.4mm thick teak wood beading shall be provided alround the top edges of table. All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.Rest all as per drg.Drg No FD 1044 | 1 | nos | ageemnorth@1 | 60 |
| 30 | Sofa Set four Seater | Sofa set 4 seater. Overall size of one piece shall be 670mm long, 745mm wide and 530mm high up to arm rest level. All wood shall be of first class teak wood (MP). Legs of sofa set shall be 70mmx35mm in section teak wood. Front legs shall be joined by 100mmx35mm in section wooden rail in front. Front and rear legs shall be joined with 100mmx35mm in section wooden rails in sides. Three wooden bearers of 40mmx40mm in section shall be provided below the seat to support the wooden battens of 50mmx20mm in section. Arm rests shall be made to shape out of 70mmx35mm in section wooden horizontal at bottom and top and vertical sides 70mmx35mm in section wooden horizontal at bottom and top and vertical sides slanting as 560mm. 30mmx50mm in section wooden rail to support back frame shall be provided joining the rear legs. 100mm thick seat cushions and back cushions shall be of size 530mmx560mm. The cushion shall be of cool foam or any other superior quality foam of 32 or 48 density as approved by Engineer-in-charge. Cushions shall be covered with tapestry cloth of not less than 400/- per metre or as directed by Engineer-in-charge. All wood surfaces exposed to view when placed in position shall be French polished with lacquer finish. Drg No FD 234/18 | 1 | each | ageemnorth@1 | 60 |
| 31 | Table bed side | Table bed side. The overall size of the table bed side 450mm x 450mm x 500mm (front) and 650mm H in rear as shown in drg. The frame shall be of 18mm square hollow pipe of 18 gauge. It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of drawers. Each drawer shall be provided with 2 x Nos of stainless steel telescopic channels. Drawer shall be provided with 100mm long 8mm dia chrome plated handles Rest all specifications and dimensions are as per drg. All metal surface shall be dry powder coated in black and all unlaminated surfaces shall be polished in satin/mat melamine finish of walnut shade after preparation of surfaces. Drg No FD 276, 288 | 1 | nos | ageemnorth@1 | 60 |
| 32 | Table Centre | Table Centre (Two Tier). Overall size shall be 1200mm long, 600mm wide and 400mm high. All wood shall be of seasoned 1st class hardwood teakwood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top.Legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated particle board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of both the tops.25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. Rest all as per drg. All exposed wooden surfaces shall be french polished with two coats after preparation of surfaces. Drg No FD 393/287 | 1 | nos | ageemnorth@1 | 60 |
| 33 | Table 3 feet x 2 feet with Drawer | Table 3 feet x 2 feet with Drawer. Over all size of 900x760x600 mm with Four legs each leg height of 760mm with Top and one Tube MS Covered with between four legs size of 25 MS Tube 1.6mm TM Stiffering along with Drawer of 25 MS Tube 1.6mm TH Top Rails which 1.0mm TH for For drawer ,1.6mm TH Flat Iron 50 wide masde to shape welded to Outer Sheet. Drg No FD 283, 231 | 1 | nos | ageemnorth@1 | 60 |
| 34 | Table dressing Gents | Table dressing Gents. Overall size shall be 900mm long, 300mm wide and 150mm high at bottom with support of mirror as 1115mm high. The frame of mirror shall be overall size of 410mm wide and 790mm high, fixed at 150mm from top of lower base.The entire box shall be made of 12mm thick relaminated MDF board except back and bottom which shall be of 12mm thick plywood .The sides of the drawers shall be made of 12mm thick commercial ply with bottom of 6 mm ply and front of 12mm thick prelaminated MDF board.The mirror of 380mmx760mm shall be provided with its wooden frame made of 25mmx35mm teak wood battens.The bach shall be of 6mm thick plywood.5.5mm thick mirror distortion free shall be provided on 6mm thick plywood backing..3mm thick flat iron key plates of MS.Two knobs of aluminium anodized dark brown in shade shall be provided to both the drawers. 25mmx25mm in section shall be provided at top of mirror and painted with black paint. All wood surfaces shall be french polished with high gloss finish. Drg No FD 230, 379 | 1 | nos | ageemnorth@1 | 60 |
| 35 | Book Rack with sliding glass wooden | Book Rack with sliding glass wooden. Overall size shall be 840mm long,310mm wide and 1675mm high,Back,sides,top bottom and shelves shall be of mild steel sheet 1.25mm thick bottom 1200mm high portion shall have 1.6mm thick mild steel sheet as extra piece welded to bottom sheet of 1.25mm thick .The gap on both sides shall be covered with 10mm wide 1.6mm thick mild steel sheet of 120mm high th book case shall have four eual compartments.Channels of 1mm thick mild steel sheet shall be provided on top sides of front glass shutter for holding the wheel.Another channel of 30mm and of 1.25mm mild steel shall sheet be made and fitted to front shutters for forming as guide rail which moves over channel of 25mm of 1mm mild steel track in such a way that when shutter shall open it slides in sied the back shelf.65mm wide 1.6mm thick mild steel sheet frame shall be provided al-round the front glass of each compartment.3mm thick glass pane shall be fixed to the front shelves of each compartment.1.6mm thick mild steel sheet 280mm long shall be provided at top and bottom of each glass shutters of each compartment. Two steel chromiu plated handles 100mm long and a four lever brass lock of 50mm shall be provided to each shutter of each compartment .All steel surfaces exposed to view when placed in position shall be painted with automotive paint over a coat of primer after preparation of surfaces as directed by Engineer-in-charge. Drg No FD 45 | 1 | each | ageemnorth@1 | 60 |
| 36 | Almirah medium wooden | Almirah medium wooden 1/2 H x 1/2 SH. Over all size shall 920mm long,485mm wide and 1985 mm high,The base shall be made of two numbers wood sheet channels shape with ends covered and fitted with Teak to bottom of almirah.Full furnished wooden channel shall be 1mm thick.The base channel shall be fitted at 50mm from each end of 920mm length.Top,sides ,back,bottom and front of almirah shall be 1mm thick with wooden sheet.Two shelves shall be provided at 350mm and 700mm from bottom of almirah.Ahan ging rod 600mm top shall be provided wihich shall be 200 dia wooden and conduit pipe of wall thickness 1.25mm.Two sockets shall be provided at the end of hanging rod.Front shutters shall have two leaves.A steel chromium plated handle 100mm long shall provided to shutters.A three way locking device shall be provided to front shutters.Each leaf of front shutters.Each leaf of front shutter shall be hinged shall be hinged with three numbers butt hingers 75mm long. Drg No FD 108(M) | 1 | each | ageemnorth@1 | 60 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
Experience Criteria
2
Past Performance
3
Bidder Turnover
4
Certificate (Requested in ATC)
5
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
6
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Similar Tenders
5 found
Executive Table,Executive chair,Visitors Chairs,Sofa cloth buyer choise,Tea Table,Office Table,Offi
National Commission For Scheduled Castes
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Indo-Tibetan Border Police Furniture Supply Tender 2026 Location Not Specified with 2% EMD ₹30000 and Itbp Inspection Standards
Indo Tibetan Border Police (itbp)
📍 KAMRUP, ASSAM
EMD: ₹30,000
Est: ₹15.0 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Single / Double Wooden Bed with/without Storage (V2),Steel Almirah / Cabinets conforming to IS 3312
All India Institute Of Medical Sciences (aiims)
📍 BATHINDA, PUNJAB
EMD: ₹12,700
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Directorate Of Sericulture Assam Office Furniture & Equipment Tender 2026 - 2799262.0 Estimated Value, EMD ₹56000, 39 Items
Directorate Of Sericulture
📍 KAMRUP, ASSAM
EMD: ₹56,000
Est: ₹28.0 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
National Education Society For Tribal Students Furniture Tender Banswara Rajasthan 2026 ISI/ISO Standards Mixed Category
National Education Society For Tribal Students
📍 BANSWARA, RAJASTHAN
EMD: ₹2.3 L
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 5
GeM-Bidding-8831825.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS