Rural Development Department Bihar Leg Press Outdoor Gym Equipment Tender Aurangabad Bihar 2026 ISI Marked Safety Standards
Rural Development Department
AURANGABAD, BIHAR
Posted:
26 January 2026
Closed:
5 February 2026
GEM
GEM
Invitation to Bid - Air Walker / Stroller - Outdoor Gym Equipment,Air Walker / Stroller - Outdoor Gym Equipment,Twister in BUXAR, BIHAR
Progress
Issue05-Feb-2026, 5:38 pm
AwardPending
Explore all 4 tabs to view complete tender details
Quantity
14
Category
Air Walker / Stroller - Outdoor Gym Equipment
Bid Type
Two Packet Bid
Organization
Buxar District Panchayats
Department
Department of Panchayati Raj
Bid Validity
30 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Min. Avg. Annual Turnover
10
OEM Avg. Turnover
50
Past Performance
50 %
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Buxar District Panchayats has released a public tender for Air Walker / Stroller - Outdoor Gym Equipment (Q3), Twister - Outdoor Gym Equipment (Q3), Shoulder Builder / Arm Wheel - Outdoor Gym Equipment (Q3), Sit Up Board - Outdoor Gym Equipment (Q3), Leg Press - Outdoor Gym Equipments (Q3), Chest Press - Outdoor Gym Equipments (Q3), Parallel Bar - Outdoor Gym Equipment (Q3), Surf Board - Outdoor Gym Equipment (Q3) in BUXAR, BIHAR. Quantity: 14. Submission Deadline: 16-02-2026 18: 00: 00. Download documents and apply online.
Documents 16
GeM-Bidding-8939547.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
CATALOG-Specification-2
CATALOG Specification
CATALOG-Specification-3
CATALOG Specification
CATALOG-Specification-4
CATALOG Specification
CATALOG-Specification-5
CATALOG Specification
CATALOG-Specification-6
CATALOG Specification
CATALOG-Specification-7
CATALOG Specification
CATALOG-Specification-8
CATALOG Specification
CATALOG-Specification-9
CATALOG Specification
CATALOG-Specification-10
CATALOG Specification
CATALOG-Specification-11
CATALOG Specification
CATALOG-Specification-12
CATALOG Specification
CATALOG-Specification-13
CATALOG Specification
CATALOG-Specification-14
CATALOG Specification
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Panchayati Raj Department Bihar Outdoor Gym Equipment Tender Samastipur 2026 ISI IS 1239 ISO 9001
Panchayati Raj Department
SAMASTIPUR, BIHAR
Posted:
22 January 2026
Closed:
2 February 2026
GEM
Rural Development Department Bihar Shoulder Builder / Arm Wheel Outdoor Gym Equipment Tender 2026 East Champaran BIHAR ISI GI PIPES IS 1239
Rural Development Department
EAST CHAMPARAN, BIHAR
Posted:
19 January 2026
Closed:
29 January 2026
GEM
Air Walker / Stroller - Outdoor Gym Equipment,Chest Press - Outdoor Gym Equipments,Multi Adjustabl
Rural Development Department
SAMASTIPUR, BIHAR
Posted:
16 January 2026
Closed:
28 January 2026
GEM
Araria District Panchayats Outdoor Gym Equipment Tender 2026 – ISI GI Pipe Standards, Installation & Safety Certification
Araria District Panchayats
ARARIA, BIHAR
Posted:
17 January 2026
Closed:
28 January 2026
GEM
Tender Results
Loading results...
Technical Specifications
14 Items
Item #1 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Single, Double |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Frame | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | leg movement frame | 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe |
| MATERIAL | Leg Movement Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Handle Frame | 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe |
| MATERIAL | Handle Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| MATERIAL | Foot Rest | Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #2 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Single, Double |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Frame | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | leg movement frame | 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe |
| MATERIAL | Leg Movement Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Handle Frame | 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe |
| MATERIAL | Handle Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| MATERIAL | Foot Rest | Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #3 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Double Twister ( Both Standing ), Double Twister ( Both Sitting ), Double Twister ( One standing and one sitting ), Triple Twister ( Three standing ), Triple Twister ( Three Sitting ), Tripple Twister ( Two standing, one sitting ), Tripple Twister ( one standing, two sitting ), Single Twister Standing, Single Twister Sitting |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade Material as per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Standing/ Sitting Twister Frame Pipe | 25 mm Nominal Bore G.I. Pipe, 32 mm Nominal Bore G.I. Pipe, 40 mm Nominal Bore G.I. Pipe, 50 mm Nominal Bore G.I. Pipe |
| MATERIAL | Standing/ Sitting Twister Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Standing/ Sitting Twister Frame Pipe (As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, Not Applicable |
| MATERIAL | Grade Material as per table 2 IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Rotating Disk Support Pipe at Bottom Pipe | 80 mm Nominal Bore G.I. Pipe, 100 mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150 mm Nominal Bore G.I. Pipe |
| MATERIAL | Rotating Disk Support Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | Rotating Disk Support Pipe ( as per IS 1161 ) as per Clause 3, Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10mm Thickness, Not Applicable |
| MATERIAL | Grade Material (as per table 2 of IS 1161 ) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Handle Frame Pipe | 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe |
| MATERIAL | Handle Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, Not Applicable |
| MATERIAL | Grade Material per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade Material (as per table 2 of IS 1161) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | M S Foundation Plate Thickness | 10, 12 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| MATERIAL | Foot Rest | Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #4 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Double Twister ( Both Standing ), Double Twister ( Both Sitting ), Double Twister ( One standing and one sitting ), Triple Twister ( Three standing ), Triple Twister ( Three Sitting ), Tripple Twister ( Two standing, one sitting ), Tripple Twister ( one standing, two sitting ), Single Twister Standing, Single Twister Sitting |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade Material as per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Standing/ Sitting Twister Frame Pipe | 25 mm Nominal Bore G.I. Pipe, 32 mm Nominal Bore G.I. Pipe, 40 mm Nominal Bore G.I. Pipe, 50 mm Nominal Bore G.I. Pipe |
| MATERIAL | Standing/ Sitting Twister Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Standing/ Sitting Twister Frame Pipe (As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, Not Applicable |
| MATERIAL | Grade Material as per table 2 IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Rotating Disk Support Pipe at Bottom Pipe | 80 mm Nominal Bore G.I. Pipe, 100 mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150 mm Nominal Bore G.I. Pipe |
| MATERIAL | Rotating Disk Support Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | Rotating Disk Support Pipe ( as per IS 1161 ) as per Clause 3, Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10mm Thickness, Not Applicable |
| MATERIAL | Grade Material (as per table 2 of IS 1161 ) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Handle Frame Pipe | 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe |
| MATERIAL | Handle Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, Not Applicable |
| MATERIAL | Grade Material per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade Material (as per table 2 of IS 1161) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | M S Foundation Plate Thickness | 10, 12 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| MATERIAL | Foot Rest | Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #5 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Two Wheel, Three Wheel |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe construction | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Ring ( Wheel ) | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe |
| MATERIAL | Ring ( Wheel ) Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Pipe of Spokes of Wheel | 15mm Nominal bore G.I. pipe, 20mm Nominal bore G.I. pipe |
| MATERIAL | Pipe of Spoke of Wheel , Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Connector Pipe ( between Main Central Pipe and Wheel ) | 32 mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe, 50 mm Nominal bore G.I. pipe |
| MATERIAL | Connector Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #6 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Two Wheel, Three Wheel |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe construction | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Ring ( Wheel ) | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe |
| MATERIAL | Ring ( Wheel ) Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Pipe of Spokes of Wheel | 15mm Nominal bore G.I. pipe, 20mm Nominal bore G.I. pipe |
| MATERIAL | Pipe of Spoke of Wheel , Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Connector Pipe ( between Main Central Pipe and Wheel ) | 32 mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe, 50 mm Nominal bore G.I. pipe |
| MATERIAL | Connector Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #7 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Single Station, Double Station |
| MATERIAL | Type of Back Rest | Perforated Sheet, Set of Rectangular Flat Pipes, Plain Sheet |
| MATERIAL | Material of Back Rest | Fibre Reinforced Plastic, Mild Steel Plate, LDPE, HDPE, Galvanized Iron(GI) |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Frame/Central Pipe | 50mm Nominal Bore G.I. Pipe, 80mm Nominal Bore G.I. Pipe, 100 mm Nominal Bore G.I. Pipe, 125mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Frame/Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Main Frame/Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, 50 mm NB with 2.9mm Thickness, 50 mm NB with 3.6mm Thickness, 50 mm NB with 4.5 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material as per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Foot Rest Pipe | 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe |
| MATERIAL | Foot Rest Pipe , Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foot Rest Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material as per table 2 IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Back Rest Frame Pipe and Connecting Links | 25 mm Nominal Bore G.I. Pipe, 32 mm Nominal Bore G.I. Pipe, 40 mm Nominal Bore G.I. Pipe |
| MATERIAL | Back Rest Frame Pipe and Connecting Links, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | Back Rest Frame Pipe and Connecting Links ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness | 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material (as per table 2 of IS 1161 ) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Leg Support Pipe | 32mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe, 50mm Nominal bore G.I. pipe |
| MATERIAL | Leg Support Pipe , Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Leg Support Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6mm Thickness, 50 mm NB with 4.5mm Thickness, Not Applicable |
| MATERIAL | Grade of Material per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material (as per table 2 of IS 1161) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | M S Foundation Plate Thickness | 10, 12 |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #8 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Single Station, Double Station |
| MATERIAL | Type of Back Rest | Perforated Sheet, Set of Rectangular Flat Pipes, Plain Sheet |
| MATERIAL | Material of Back Rest | Fibre Reinforced Plastic, Mild Steel Plate, LDPE, HDPE, Galvanized Iron(GI) |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Frame/Central Pipe | 50mm Nominal Bore G.I. Pipe, 80mm Nominal Bore G.I. Pipe, 100 mm Nominal Bore G.I. Pipe, 125mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Frame/Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Main Frame/Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, 50 mm NB with 2.9mm Thickness, 50 mm NB with 3.6mm Thickness, 50 mm NB with 4.5 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material as per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Foot Rest Pipe | 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe |
| MATERIAL | Foot Rest Pipe , Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foot Rest Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material as per table 2 IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Back Rest Frame Pipe and Connecting Links | 25 mm Nominal Bore G.I. Pipe, 32 mm Nominal Bore G.I. Pipe, 40 mm Nominal Bore G.I. Pipe |
| MATERIAL | Back Rest Frame Pipe and Connecting Links, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | Back Rest Frame Pipe and Connecting Links ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness | 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material (as per table 2 of IS 1161 ) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Leg Support Pipe | 32mm Nominal bore G.I. pipe, 40 mm Nominal bore G.I. pipe, 50mm Nominal bore G.I. pipe |
| MATERIAL | Leg Support Pipe , Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Leg Support Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6mm Thickness, 50 mm NB with 4.5mm Thickness, Not Applicable |
| MATERIAL | Grade of Material per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade of Material (as per table 2 of IS 1161) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | M S Foundation Plate Thickness | 10, 12 |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #9 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Leg Press Single, Leg Press Double |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Moving Frame Pipe | 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe |
| MATERIAL | Moving Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foot Rest Frame/ Foot Rest Hinging Pipe | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe |
| MATERIAL | Foot Rest Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates |
| MATERIAL | Connecting Links | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates |
| MATERIAL | Connecting Links Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| MATERIAL | Seat and Back Rest | 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, 3mm thick, LLDPE with uniform bending radius to avoid sharp edges |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #10 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Leg Press Single, Leg Press Double |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Moving Frame Pipe | 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe |
| MATERIAL | Moving Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foot Rest Frame/ Foot Rest Hinging Pipe | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe |
| MATERIAL | Foot Rest Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates |
| MATERIAL | Connecting Links | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates |
| MATERIAL | Connecting Links Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| MATERIAL | Seat and Back Rest | 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, 3mm thick, LLDPE with uniform bending radius to avoid sharp edges |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #11 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Chest Press Single, Chest Press Double |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Handle Frame | 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe |
| MATERIAL | Handle Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Seat Frame | 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe |
| MATERIAL | Seat Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Connecting Links | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates |
| MATERIAL | Connecting Links Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | Foot Rest Pipe | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe |
| MATERIAL | Foot Rest Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Seat and Back Rest | 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, 3mm thick, LLDPE with uniform bending radius to avoid sharp edges |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #12 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Chest Press Single, Chest Press Double |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Central Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Handle Frame | 32mm Nominal bore G.I. pipe, 40mm Nominal bore G.I. pipe |
| MATERIAL | Handle Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Seat Frame | 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe |
| MATERIAL | Seat Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Connecting Links | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 10mm thick MS plates, 12mm thick MS plates |
| MATERIAL | Connecting Links Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | Foot Rest Pipe | 25mm Nominal Bore G.I. Pipe, 32mm Nominal Bore G.I. Pipe |
| MATERIAL | Foot Rest Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | MS Foundation Plate Thickness | 10, 12 |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Seat and Back Rest | 2mm Thick G.I. Seat with uniform bending radius to avoid sharp edges, 3mm thick, HDPE with uniform bending radius to avoid sharp edges, 6mm thick, Fibre Reinforced plastic with uniform bending radius to avoid sharp edges, 2.5mm thick, M.S. Perforated with uniform bending radius to avoid sharp edges, 3mm thick, LLDPE with uniform bending radius to avoid sharp edges |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
Item #13 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| Material | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| Material | All the GI Pipes are ISI marked | Yes, No |
| Material | Vertical / Standing Pipes | 32 mm Nominal Bore G.I. Pipe, 40 mm Nominal Bore G.I. Pipe, 50 mm Nominal Bore G.I. Pipe, 80 mm Nominal Bore G.I. Pipe, 100 mm Nominal Bore G.I. Pipe, 25mm Nominal Bore G.I. Pipe |
| Material | Vertical/ Standing Pipes, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| Material | Vertical / StandingPipe (as per Clause 3 of IS 1161) , Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, Not applicable |
| Material | Horizontal Pipe | 25 mm Nominal Bore G.I. Pipe, 32 mm Nominal Bore G.I. Pipe, 40 mm Nominal Bore G.I. Pipe, 50 mm Nominal Bore G.I. Pipe |
| Material | Horizontal Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| Material | Horizontal Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, Not applicable |
| Material | Grade Material as per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| Material | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 3 mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 3 mm |
| Material | Nominal Bore of Foundation Pipe | 32 mm, 40 mm, 50 mm, 80 mm, 100 mm, 38 mm |
| Material | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| Material | Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, Not Applicable |
| Material | M S Foundation Plate Thickness | 10, 12 |
| Material | Bearings | Ball Bearing, Tapered Roller Bearing, N.A. |
| Material | Foot Rest | Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon |
| Other Requirements | Installation | Included, Not Included |
| Certification | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| Warranty | Warranty ( years ) | 2, 3, 4, 5 |
Item #14 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| TYPE | Type | Single, Double |
| CAPACITY | Maximum User Weight ( Kg ) | 100, 110, 120 |
| MATERIAL | Governing Specification for GI Pipes | BIS specification No IS 1239 ( Part 1 )- 2004, latest, BIS specification No IS 1161:2014, latest |
| MATERIAL | All the GI Pipes are ISI marked | Yes, No |
| MATERIAL | Main Central Pipe | 80mm Nominal Bore G.I. Pipe, 100mm Nominal Bore G.I. Pipe, 125 mm Nominal Bore G.I. Pipe, 150mm Nominal Bore G.I. Pipe |
| MATERIAL | Main Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Main Central Pipe ( As per Clause 3, of IS 1161 ) Nominal Bore & Wall Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade Material as per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Movement (Paddle) Frame | 32mm Nominal Bore G.I. Pipe, 40mm Nominal Bore G.I. Pipe, 50mm Nominal Bore G.I. Pipe |
| MATERIAL | Movement ( Paddle ) Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Movement ( Paddle ) Frame Pipe ( As per as per Clause 3, of IS 1161 ) , Nominal Bore & Wall Thickness | 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, 50 mm NB with 2.9 mm Thickness, 50 mm NB with 3.6 mm Thickness, 50 mm NB with 4.5 mm Thickness, Not Applicable |
| MATERIAL | Grade Material as per table 2 IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Connecting Links | 25 mm Nominal Bore G.I. Pipe, 32 mm Nominal Bore G.I. Pipe, 40 mm Nominal Bore G.I. Pipe, 10 mm thick MS plates, 12 mm thick MS plates |
| MATERIAL | Connecting Links Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for M.S. Plates and Pipes as per IS 1161 |
| MATERIAL | Connecting Link Pipe ( As per Clause 3, of IS 1161 ) Nominal Wall & Thickness | 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, 40 mm NB with 2.9 mm Thickness, 40 mm NB with 3.2 mm Thickness, 40 mm NB with 4 mm Thickness, Not Applicable |
| MATERIAL | Grade Material (as per table 2 of IS 1161 ) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Handle Frame | 25mm Nominal bore G.I. pipe, 32mm Nominal bore G.I. pipe |
| MATERIAL | Handle Frame Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Handle Frame Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 25 mm NB with 2.6 mm Thickness, 25 mm NB with 3.2 mm Thickness, 25 mm NB with 4 mm Thickness, 32 mm NB with 2.6 mm Thickness, 32 mm NB with 3.2 mm Thickness, 32 mm NB with 4 mm Thickness, Not Appliable |
| MATERIAL | Grade Material per table 2 of IS 1161 | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | Foundation Pipes with anchoring | 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm, 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X 4mm |
| MATERIAL | Nominal Bore of Foundation Pipe | 80mm, 100mm, 125mm, 150mm |
| MATERIAL | Foundation Pipe, Class as per IS 1239 | Medium, Heavy, Not applicable for pipe as per IS 1161 |
| MATERIAL | Foundation Pipe Pipe ( as per IS 1161 ) as per clause 3, Nominal Wall & Thickness | 80 mm NB with 3.2 mm Thickness, 80 mm NB with 4 mm Thickness, 80 mm NB with 4.8 mm Thickness, 100 mm NB with 3.6 mm Thickness, 100 mm NB with 4.5 mm Thickness, 100 mm NB with 5.4 mm Thickness, 125 mm NB with 4.5 mm Thickness, 125mm NB with 4.8 mm Thickness, 125 mm NB with 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 4.5 mm Thickness, 150 mm NB,165.1 mm OD & 4.8 mm Thickness, 150 mm NB,165.1 mm OD & 5.4 mm Thickness, 150 mm NB,165.1 mm OD & 5.9 mm Thickness, 150 mm NB,165.1 mm OD & 6.3 mm Thickness, 150 mm NB,165.1 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 4.5 mm Thickness, 150 mm NB,168.3 mm OD & 4.8 mm Thickness, 150 mm NB,168.3 mm OD & 5.4 mm Thickness, 150 mm NB,168.3 mm OD & 6.3 mm Thickness, 150 mm NB,168.3 mm OD & 8 mm Thickness, 150 mm NB,168.3 mm OD & 10 mm Thickness, Not Applicable |
| MATERIAL | Grade Material (as per table 2 of IS 1161) | YSt 210, YSt 240, YSt 310, YSt 355, Not Applicable |
| MATERIAL | M S Foundation Plate Thickness | 10, 12 |
| MATERIAL | Bearings | Ball Bearing, Tapered Roller Bearing |
| MATERIAL | Foot Rest | Fibre Reinforced Plastic, Aluminum casting material, C.I., LDPE, HDPE, Nylon |
| OTHER REQUIREMENTS | Installation | Included, Not Included |
| CERTIFICATION | Certfication ( Safety and Quality Requirements ) | As per European Standard EN 16630, No |
| WARRANTY | Warranty ( years ) | 2, 3, 4, 5 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
Experience Criteria
2
Past Performance
3
Bidder Turnover
4
Certificate (Requested in ATC)
5
OEM Authorization Certificate
6
OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria
7
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Similar Tenders
5 found
Twister - Outdoor Gym Equipment,Chest Press - Outdoor Gym Equipments,Shoulder Builder / Arm Wheel
Urban Development And Housing Department
📍 PURNIA, BIHAR
EMD: ₹2.6 L
⏰ Deadline: 4 weeks left
🛒 Type: Goods
View
GEM
Sit Up Board - Outdoor Gym Equipment,Shoulder Builder / Arm Wheel - Outdoor Gym Equipment,Twister -
Bhakra Beas Management Board
📍 BHIWANI, HARYANA
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Rural Development Department Uttar Pradesh Outdoor Gym Equipment Tender Mahrajganj UP 2026 ISI IS 1161 1239
N/a
📍 MAHARAJGANJ, UTTAR PRADESH
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Air Walker / Stroller - Outdoor Gym Equipment,Air Walker / Stroller - Outdoor Gym Equipment,Twister
Panchayati Raj Department
📍 BUXAR, BIHAR
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
tent arctic camping and outdoor equipment
N/a
📍 BHAVNAGAR, GUJARAT
EMD: ₹30,000
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 16
GeM-Bidding-8939547.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
CATALOG-Specification-2
CATALOG Specification
CATALOG-Specification-3
CATALOG Specification
CATALOG-Specification-4
CATALOG Specification
CATALOG-Specification-5
CATALOG Specification
CATALOG-Specification-6
CATALOG Specification
CATALOG-Specification-7
CATALOG Specification
CATALOG-Specification-8
CATALOG Specification
CATALOG-Specification-9
CATALOG Specification
CATALOG-Specification-10
CATALOG Specification
CATALOG-Specification-11
CATALOG Specification
CATALOG-Specification-12
CATALOG Specification
CATALOG-Specification-13
CATALOG Specification
CATALOG-Specification-14
CATALOG Specification
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Documents
16 files available
Unlock All Documents
Sign up now to download all tender documents
Never Miss a Tender!
Get notified instantly
100% Free & Easy Setup
Takes less than 1 minute
Tender Alerts
Get notified instantly
💡 Select a price range to filter tenders by estimated bid value
💡 Tip: Type to see suggestions, add multiple keywords separated by comma, or click + to add
Loading options...
No options found matching your search.
Where should we send alerts?
You'll receive email notifications when tenders match your criteria
✓ Alert Setup Complete!
Review your selections below
Email alerts will be sent when tenders match your criteria