TenderDekho Logo
GEM

Government Tender Published for Almirah Med with Shelves,Bath Mat,Chair Easy,Chair Writing,Charpoy MS Rectangular Pipe with Ply woo in SOUTH ANDAMAN, ANDAMAN & NICOBAR

Bid Publish Date

15-May-2025, 11:28 am

Bid End Date

05-Jun-2025, 12:00 pm

EMD

₹21,000

Value

₹6,89,755

Location

SOUTH ANDAMANS , ANDAMAN & NICOBAR

Progress

Issue15-May-2025, 11:28 am
AwardPending
Explore all 5 tabs to view complete tender details

Quantity

65

Category

Almirah Med with Shelves

Bid Type

Two Packet Bid

Categories 89

STEEL SHEET FABRIC RCC BLOCK PARTICLE BOARD DOORS FITMENT STORAGE CHESTS AND CABINETS AND TRUNKS BILLIARD BALLS BUCKET ARMS ANGLE BOOK CASE WOODEN FURNITURE BARITONE HORNS MOLECULAR BIOLOGY REAGENTS PLY WOOD PAINTING FORESTRY PRODUCTS ALMIRAH RING STRUCTURE FABRICATION BOLTS FABRICS AND LEATHER MATERIALS WASHERS RAILS TUBE LABORATORY CHEMICAL TUBE AND FITTING WOVEN FABRIC ALUMINIUM PAINT MISCELLANEOUS FASTENERS ENAMELING PAINTS AND ACCESSORIES STEEL ALMIRAH WIRE WHEAT FLOUR LAWN STEEL FURNITURE CHANNEL ERECTION OF STRUCTURAL CANVASES AND FILMS AND BOARDS COMPRESSED BOARD FOOT REST HARDWARE AND FASTENERS LOADER PLYWOOD WOODEN BOARD DISTEMPER RIVETS STRIP WOODEN PRODUCT PAINTS AND PRIMERS FIBERS THREADS AND YARNS TUBES AND PIPES CANTILEVER STEEL TUBE COMPLETION EQUIPMENTS HANDGUN HYDRAULIC SHOVEL TRANSITION METALS WOOD SUPPLY STOOL LABORATORY MATERIAL BLOOD PRESSURE MEASURING INSTRUMENT ACCESSORIES CENTRE TABLE FABRICATOR MACHINE DIAMONDS PLASTIC GAUGE VALVE PARTS AND ACCESSORIES STOMACHERS AUDITORIUM SEAT SCREWS STETHOSCOPE INSULATING COMPONENT STEEL TABLE PAINT SUPPLY ELECTRIC ROPE SHOVEL PAINTS BUFFERS METAL PRODUCTS BAR BRACKET ARTS AND CRAFTS VENETIAN BLIND CLEAT MANUFACTURING SERVICES PAINTING MATERIAL WOODEN PLANK

Indian Army announces a tender for Almirah Med with Shelves, Bath Mat, Chair Easy, Chair Writing, Charpoy MS Rectangular Pipe with Ply wood top, Table 3 feet x 2 feet with drawer, Teapoy, Chair Dinning, Receptacle large with bucket, Table Dining 08 pes, Table 2 feet high wooden, Table cook house with aluminium top, Chair executive, Chair adjustable revolving with arm, Rack side 3 spaces, Stool Steel 2 feet High, Table Office officer Steel, Chair CB Steel with arms, Almirah Large with shelf, Table ofice Clerk Steel in SOUTH ANDAMAN, ANDAMAN & NICOBAR. Quantity: 65. Submission Deadline: 05-06-2025 12: 00: 00. Last date to apply is approaching fast!

Documents 5

GeM-Bidding-7792976.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Almirah small steel with shelves,Almirah large steel with shelves,Chair visitor or Chair writing MA

Indian Army

HYDERABAD, TELANGANA

Posted: 11 July 2025
Closed: 31 July 2025
GEM

Almirah large steel with shelves,Almirah small steel with shelves,Chair Computer,Chair Visitor cush

Indian Army

SOUTH ANDAMAN, ANDAMAN & NICOBAR

Posted: 24 June 2025
Closed: 15 July 2025
GEM

Almirah large steel half H half S,Almirah large steel with shelves DRG NO FD 1031,Almirah med steel

Indian Army

ALLAHABAD, UTTAR PRADESH

Posted: 9 February 2026
Closed: 19 February 2026
GEM

Almirah Large Steel with Self,Almirah Med with Steel,Chair Easy,Chair Dining,Chair Varandah,Chair W

Indian Army

Posted: 26 November 2025
Closed: 6 December 2025
GEM

Almirah med steel,Almirah Large Steel with shelves,Book shelf open Large steel,chair writing MAP,Ch

Indian Army

WEST DELHI, DELHI

Posted: 11 February 2025
Closed: 4 March 2025
GEM

Bill of Quantities (BOQ) 20 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Almirah Med with Shelves Almirah Med with Shelves. Overall size shall be 1270mm high,765mm wide and 440mm deep. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship. Rest all as per drg. A steel chromium plated handle 100mm long shall be provided to the shutter. The locking device shall be three way locking device and shall also be provided with decorative key plate . All steel surfaces exposed to view when placed in position shall be painted with two coats of smoke grey paint internally and extrenally with spray machine after preparation of surfaces. Painting shall be done with spray machine. Drg No FD 10332 1 nos ageemnorth@1 60
2 Bath Mat Bath Mat. Overall size shall be 700mm long.450mm wide and 80mm high.All wood shall be of first class hard wood teak(MP).Six batterns 50mmx20mm in section of teak wood equally spaced with end battens projecting 6mm on either side in 450mm width.Three bases of wood support made to shape out of 65mmx25mm shall be provide as shown in drawing.Battens shall be fixed to base from bottom with brase screws.All wood surfaces exposed to view when placed in position shall be painted with two coats of white enamel paint over a coat of primer after preparation of surfaces. Drg No FD 254,14,205 1 nos ageemnorth@1 60
3 Chair Easy DIChair Easy. Overall size shall be 510 mm long, 575mm wide and 740mm high. All wood shall be first class teak (MP). Front legs shall be 30mmx55mm in section and 355mm high up to seat level. Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical. Front, back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing. front, back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing. Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak wood to form the frame Caning shall be done with plastic cane of 2mm wide and 0.4mm thick half round gola type weighing not less than 6gms in ten running meters. Caning shall be done in Godrej pattern. PVC shoes 25mmx25mm shall be provided at the bottom of all legs. All wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer finish. Drg No FD 229 2 nos ageemnorth@1 60
4 Chair Writing Chair Writing . The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat of primer.Rest all specifications are as per drg and directed by Engr-In-Charge. Drg No FD 280 2 nos ageemnorth@1 60
5 Charpoy MS Rectangular Pipe with Ply wood top Charpoy MS Rectangular Pipe with Ply wood top. Overall size shall be 1980mm long,900mm wide and 440m high.Two long rails and two short rails shall be of 25mm x 65mmx 16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant betwen tow opposite long rails.Six number cleat of size 25mmx60mmx6mm shall be welded with frame to supoort ply.Two stiffeners joining legs of 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails.Six number cleat of size of 25mmx60mmx6mm shall be provided at 150mm from ground level.12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt.one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg. PVC hard rubber shoes shall be fixed at bottom of each leg.All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer. Rest all as per drg. Drg No FD 220 14 nos ageemnorth@1 60
6 Table 3 feet x 2 feet with drawer Table 3 feet x 2 feet with drawer. Over all size of 900x760x600 mm with Four legs each leg height of 760mm with Top and one Tube MS Covered with between four legs size of 25 MS Tube 1.6mm TM Stiffering along with Drawer of 25 MS Tube 1.6mm TH Top Rails which 1.0mm TH for For drawer ,1.6mm TH Flat Iron 50 wide masde to shape welded to Outer Sheet. Drg No FD 283,231 2 nos ageemnorth@1 60
7 Teapoy Teapoy wooden 600x450x540mm. The overall size shall be 600mm long, 450mm wide and 540mm high. The legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood.5mmx5mm in section groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs. A centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg.25mm thick and 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. Top of the table shall be of 18mm thick prelaminated MDF board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of top. All wood surfaces shall be French polished with high gloss finish. Rest all as per drg. Drg No FD 382,34,278 2 nos ageemnorth@1 60
8 Chair Dinning Chair Dinning. Overall size shall be 890mm high, 440mm wide and 430mm deep. The size of the legs shall be 30x55mm .Front and side rails shall be of size 30x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.One stiffener of size 40mmx40mm shall be fixed in between the two opp rails of the seat for providing extra support to PVC seat. PVC seat 4mm thick of PPCP material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws. The height of the seat shall be at 460mm high from ground. The size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs. All wood surfaces shall be lacquer polished with high gloss finish of natural shade. Rest all as per drg. Drg No FD 203/279 7 nos ageemnorth@1 60
9 Receptacle large with bucket Receptacle large with bucket. Overall size shall be 420mm dia and 510mm high.The body shall be of 1mm thick GI(Galvanized Iron) .Circular sheet of 405 mm dia.Bottom of circular sheet boday shall have 25mmx4mm flat iron band welded to 1mm thick circular sheet.95mm x50mm dia foot rest 3m thick cut to shape shall be welded to 25mmx4mm flat iron lever whose fulcrum shall be in the centre of circular body supported by 25mmx3mm flat iron made to V-Shape and welded to circular sheet body in such a way that 6mm dia loose rivet shall be provided in centre to hold and support fulcrum. The other end of lever shall be fixed to 25mm x 4mm vertical lever hanged at bottom and top 3 dia pin.The other end of vertical lever shall be attached mild stetel reinforcement sheet of 175mmx100mm welded to cover to enable cover to open when the pressure shall be put on the top of foot rest at bottom lever.Top cover shall be of 1mm thick GI sheet cover 420mm dia and bend inside cover 3mm dia wire all-round the cover.Two numbers brackets made to shape out of 3mm thick mild steel sheet as reinforcementsheet,welded to cover,enables the cover to open.Bucket shall be made of 1mm thick GI sheet 340mm dia at top and 210mm dia at bottom .Top of bucket shall have 2 numbers bracket 50mmx65mmx3mm thick flat iron welded to bucket for holding 10mm dia mild steel bar handle. 40x3mm mild steel flat iron ring shall be provided at bottom of bucket. 10mm dia mild steel bar handle shall be provided to bucket.All steel surfaced ,except galvanized iron surfaces,shall be given two coats of aluminium paint over cost of primer after preparation of surfaces. Drg No FD 43/1044 FD 43/1044 3 nos ageemnorth@1 60
10 Table Dining 08 pes Table Dining 08 pes. Overall size shall be 1800mm long,900mm wide and 760mm high.All wood shall be of first class together at the top of legs by 25mmx100mm in section top rail provided in long and shor sides.5mmx5mm in section vertical groove shall be provided in the middle in the visible two sides of all legs when placed positition .Eight numbers,25mmx3mm flat iron 200mm long bent to right angle shape corners shall be provided at all the junction of top rails meeting wise leg.Wooden corners shall be provided in side board,19mm thick with teak veneer shade at top and plag white on orther side shall be provided as top of the table. 25mmx40mm teak wood edging shall be provided all round the top edges of the table.All wood surfaces exposed to view when placed in position shall be French polish with lacquer finish as directed by Engineer in charge. Drg No FD 239/273 1 nos ageemnorth@1 60
11 Table 2 feet high wooden Table 2 feet high wooden. Overall size of 510x305x245mm with four legs with top covered ,the wooden shall be furnished with teak wood material ,rest with diagram 2 nos ageemnorth@1 60
12 Table cook house with aluminium top Table cook house with aluminium top. Over all size shall be 900mm long.540mm wide and 840mm high.All wood shall be of first class hard wood teak(MP).Legs shall be 35mmx60mm in section and 815mm high.The legs shall be joined together be 35mmx60mm in section and 815mm high .The legs shall be joined together at top level of legs with 25mmx75mm in section top rails in short and long sides.The top rails of long sides shall be joined in the middle by a stiffener of 50mmx25mm in section teak wood.The top rails of short sides shall be joined in the middle by a stiffener 25mmx50mm in section.joining legs in short sides at 100mm from bottom legs.A long stiffener joining the short stiffeners.Four numbers 6mm dia mild steel lugs of 35mm long shall be provided on the top of all legs in such a way that 25mm shalll be in the legs and 10mm protrudes and insert in the 25mm thick polished stone top. The top shall be of 25mm thick polished stone slab in one piece as directed by Engineeer-in-Charge regarding the type of stone,that is ,Kotah or Shahabad or Kudappa or Chittor black or Dholpur.The polished stone slab shall project 25mm long in long and short sides.All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Drg No FD 1019/297/497 1 nos ageemnorth@1 60
13 Chair executive all as per diagram and specifications 1 nos ageemnorth@1 60
14 Chair adjustable revolving with arm all as per diagram and specifications 7 nos ageemnorth@1 60
15 Rack side 3 spaces Rack side 3 spaces. Overall size shall be 840mm long,355mm wide and 810mm high,Four mild steel angle iron 40mmx40mmx3mm shall be provided as legs and shall be 810mm high.The middle shelf shall be equally spaced between top and bottom shelves.The thickness of sheet shall be 1mm .Top shelf shall have three compartments or spaces equally spaced with 50mm high partition and back covering with mild steel sheet 1mm thick. All steel surfaces exposed to view when placedin postition shall be given two coast of enamel paint over a coat pf preparation of surfaces.Painting shall be done with spray machine. Drg No FD 106,97(M) 5 nos ageemnorth@1 60
16 Stool Steel 2 feet High Stool Steel 2 feet High. Over all sie shall be 305mm long,305mm wide and 760mm high.Stool shall be made out of 1mm thick mild steel sheet as shown on drawing.Legs shall be of angular frame.Bottom stiffeners shall be of 1mm thick sheet and of angular shape. Top shall be of plain sheet .All Steel and iron surfaces exposed to view when placed in position shall be painted wiith two coats of enamel paint over a coat of primer after preparation of surfaces,Tint of paint shall be directed by GE.Painting shall be done with spray machine. Drg No FD 81 (M) 1 nos ageemnorth@1 60
17 Table Office officer Steel Table Office officer Steel. Overall size shall be of 1680x70x760mm. 25mm MS Square tube 1.6mm thick shall be provide to frame 1mm thick MS sheet nominal all around for drawer.Top shall be of 18mm thick pre-launched MDF board ISI Mark (exterior gde) one side decorative finish approved by GE and 4mm thick teak wood edging all around shall be provided for top.Three drawers shall be provided on right hand sides of table .A cupboard with front openable door shall be provided on the left side of the table .A shelf shall also be provided at the middle of cupboard .All sheet for drawers shelf and cupboard and back covering shall be 1mm thick. Hard rubber shoes shall also be provided to the bottom of legs.Rest all as per drgs. All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and externally with spray machine after preparation of surfaces .A mark of MES shall also be provided on top left corner of front shutter with visible colour.Painting shall be done with spray machine. Rest all as per drg. Drg No FD 84(M)/1003 1 nos ageemnorth@1 60
18 Chair CB Steel with arms Chair CB Steel with arms. Overall size shall be 535mm wide,560mm deep and 900mm high. Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 25mm dia mild steel tubing having wall thickness 1.6mm Welding of frame where required shall be as directed by GE and in running welding grinded to give smooth surface.The seat and back frame of the chair shall be made up of quality teak wood in natural polish with polythene cane in godrej pattern confirming to IS-5378 94(Type-I) of durable quality .The wooden seat frame shall be further supported by steel strips measuring 19mm x 3mm at the front and the rear and each strip shall be welded to ERW frame.The seat and back shall be fixed by providing suitable nut bolts and washers..The arms shall be of PPCP material in lieu of teak wood and shall be fixed with screws from beneath. Weaving in teak wood seat and back shall be done with plastic cane in godrej pattern. Cane shall be 2mm wide and 0.4mm thick, Gola type weighing not less than 6 gms/10 RM..Bottom of legs shall have hard rubber shoes. All iron surfaces exposed to direct view shall be stove enamelled painted with two coats of enamel grey paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieve smooth surfaces. Drg No FD 75 (M) 3 nos ageemnorth@1 60
19 Almirah Large with shelf Almirah Large with shelf Overall size shall be 1985mm high,920mm wide and 485mm deep. The base shall be made o ftwo numbers mild steel sheet channel bases made in U Shaped with ends covered.Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be upto full width of 485mm and shall be 100mm high Top,sides bottom and back of almirah shall be of 1mm thick mild steel sheet.Four shelves equally spaced of 1mm thick mild steel shall be provided to make five compartments.Front shutter shalll have two leaves of equal size Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung.Alll joints,welding and fixing shall be done in accordance with the standard workmanship.Rest all as per drg. One chromium plated steel handle with a locking device shall be provided as shown on drawing. The locking device shall be three way locking device and shall also be provided with decorative key plate.All steel surfaces exposed to view when placed in position shalll be painted with two coats of smoke grey paint internally with spray machine after preparation of surfaces. Painting shall be done with spray machine. Drg No FD 1031/351 4 nos ageemnorth@1 60
20 Table ofice Clerk Steel Table ofice Clerk Steel. Over all Size of 1500x750x750mm of Outer Size . Top made of 18mm thick superior quality pre laminated particle board of Grade II Type II Confirming to IS 12823,The edges of the Table shall be banded with PVC strip 2mm thick using hot melt glue under heat and pressure ,The table top shall be supported by 1mm thick M.S C frame stiffener of size 24.2mm (W)x38mm(H) .The table shall have 4 legs made of electric resistant welded prime qulaity CRCA steel square tubulur frame of 25.4 mm size and of 1.2mm thickness. Drg No FD 84(M)/1004 5 nos ageemnorth@1 60

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

Experience Criteria

2

Past Performance

3

Bidder Turnover

4

Certificate (Requested in ATC)

5

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

6

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Frequently Asked Questions

Key insights about ANDAMAN & NICOBAR tender market

What are the eligibility requirements for GEM/2025/B/6188168?

The eligibility requirements include being a registered entity with relevant experience in providing furniture and infrastructural support. Bidders should demonstrate capability in executing similar projects and possess all necessary certifications.

What technical specifications must be met for the furniture items?

Bidders need to ensure that all proposed furniture items, including Almirahs, Tables, and Chairs, meet the required quality standards and safety regulations. Detailed specifications such as dimensions, weight capacities, and certifications must be submitted alongside the bid.

What is the process for Earnest Money Deposit (EMD) related to this tender?

The Earnest Money Deposit (EMD) must be submitted at the time of bid submission and typically ranges between 1-2% of the total bid value. It serves as a security to ensure commitment to the tender and will be refunded to unsuccessful bidders after the bid evaluation concludes.

How should bidders submit their documents for the tender?

Documents must be submitted electronically, adhering to the specified formats outlined in the tender guidelines. Bidders should ensure all required paperwork is completed to avoid rejection during the submission process.

What benefits do Micro, Small, and Medium Enterprises (MSEs) receive in this tender?

The tender provides special provisions for MSEs, including exemptions from certain eligibility criteria and preferences in evaluation. This approach encourages increased participation from MSEs, ultimately promoting local economies and enhancing competition in government contracts.