Indian Army Furniture Tender Kan chipuram Tamil Nadu - ISI/AAA compliant goods 2025
Indian Army
KANCHIPURAM, TAMIL NADU
Posted:
26 November 2025
Closed:
11 December 2025
GEM
GEM
Government Tender Published for Almirah Large Steel,Bath Stool PVC,Bed hard,Chair writing,Receiptical PVC,Sofa Chair with Cushion,T in SOUTH ANDAMAN, ANDAMAN & NICOBAR
Bid Publish Date
06-Aug-2025, 6:56 pm
Bid End Date
21-Aug-2025, 10:00 am
EMD
₹28,000
Value
₹9,31,240
Location
Progress
Issue06-Aug-2025, 6:56 pm
Technical20-08-2025 09:25:38
Financial
AwardCompleted
Quantity
130
Category
Almirah Large Steel
Bid Type
Two Packet Bid
Categories
82
STEEL SHEET FABRIC PARTICLE BOARD RUBBER FENDER DOORS STORAGE CHESTS AND CABINETS AND TRUNKS BILLIARD BALLS MILD STEEL PIPE BOOK CASE TEXTURE ANALYSER WOODEN FURNITURE BARITONE HORNS MOLECULAR BIOLOGY REAGENTS PLY WOOD PAINTING FORESTRY PRODUCTS ROLLER BEARING ALMIRAH STRUCTURE FABRICATION BALL BEARING WOODEN TROLLEY SOFA SET WHEEL BEARING MS PIPE AIR CYLINDERS RAILS LABORATORY CHEMICAL TUBE AND FITTING BOX ENAMELING PAINTS AND ACCESSORIES STEEL ALMIRAH BEARINGS BUSHINGS AND GEARS LAWN SOFA SPRAYER STEEL FURNITURE CHANNEL ERECTION OF STRUCTURAL CANVASES AND FILMS AND BOARDS COMPRESSED BOARD HARDWARE AND FASTENERS WORM GEAR PLYWOOD WOODEN BOARD DISTEMPER ADHESIVE CUSHION STRIP WOODEN PRODUCT PAINTS AND PRIMERS FIBERS THREADS AND YARNS WALNUT HANDGUN MAGNETIC CABINET TRANSITION METALS WOOD SUPPLY STOOL LABORATORY MATERIAL LOGIC ANALYZER FABRICATOR MACHINE DIAMONDS GAUGE MS PIPE LINE BED VALVE PARTS AND ACCESSORIES STOMACHERS SCREWS INSULATING COMPONENT FURNITURE ITEMS ARM CHAIR PAINT SUPPLY PAINTS TABLES BUFFERS METAL PRODUCTS VENETIAN BLIND MANUFACTURING SERVICES SQUARE PIPE PAINTING MATERIAL WOODEN PLANK
Indian Army announces a tender for Almirah Large Steel, Bath Stool PVC, Bed hard, Chair writing, Receiptical PVC, Sofa Chair with Cushion, Table Bed Side, Table Centre two tier, Table Dressing Ladies Including Stool, Peg table, Table Writing. in SOUTH ANDAMAN, ANDAMAN & NICOBAR. Quantity: 130. Submission Deadline: 21-08-2025 10: 00: 00. Last date to apply is approaching fast!
Documents 5
GeM-Bidding-8125210.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Almirah Large Steel Half Hanging Half Shelf,Almirah large Steel,Almirah small steel,Bed Hard,Chair
Indian Army
NILGIRIS, TAMIL NADU
Posted:
9 December 2025
Closed:
31 December 2025
GEM
Almirah Large steel with shelves,Almirah small steel with shelves,Bed hard without MNF Set,Chair di
Indian Army
SOUTH ANDAMAN, ANDAMAN & NICOBAR
Posted:
25 April 2025
Closed:
17 May 2025
GEM
Almirah Large Steel with Self,Almirah Med with Steel,Chair Easy,Chair Dining,Chair Varandah,Chair W
Indian Army
Posted:
26 November 2025
Closed:
6 December 2025
GEM
Bed ply wood top with MNF set,Table Bed Side,Sofa Set 4 seater with cushion,Table centre two tier,P
Indian Army
NICOBAR, ANDAMAN & NICOBAR
Posted:
23 July 2025
Closed:
9 August 2025
GEM
Tender Results
Loading results...
Bill of Quantities (BOQ)
11 Items
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Almirah Large Steel | Almirah Large (Steel) 1/2 Hanging 1/2 Shelving. All as shown on drawing. Overall size shall 920mm long, 485mm wide and 1985mm high. The base shall be 100mm high. The base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. Mild steel sheet for channel shall be 1mm thick. The base channel shall be welded at 50mm from each end of 920mm length. Top, sides, back, bottom and front of almirah shall be 1mm thick mild steel sheet. Two shelves shall be provided at 350mm and 700mm from bottom of almirah. Ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1.25mm. Two sockets shall be provided at the end of hanging rod. Front shutters shall have two leaves. A steel chromium plated handle 100mm long shall provided to shutters. A three way locking device shall be provided to front shutters. Each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. All joints and welding, fixing shall be done with standard workmanship. All hung. All joints and welding, fixing shall be done with standard workmanship. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of surfaces. Painting shall be done with spray machine. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-1033 | 10 | nos | bsohaddoportb@1 | 60 |
| 2 | Bath Stool PVC | Bath Stool PVC. As per trade pattern. Drg NoFD/E6/MAP/07 | 10 | nos | bsohaddoportb@1 | 60 |
| 3 | Bed hard | Bed hard. All Steel member shall be 18 Gauge MS pipe. The frame of head board and foot board shall be of 38mm MS square pipe.18mm MS square pipe shall be provided in the inner of head/foot board frame as shown in drg. 18mm thick both side prelaminated MDF board of walnut shade with 4mm thick teakwood beading shall be screwed to MS strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. One stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as per drawing. Drg No FD/E6/MAP/08 | 10 | nos | bsohaddoportb@1 | 60 |
| 4 | Chair writing | Chair writing. The frame of the chair shall be of 16 gauge 25mm dia MS tubular frame powder coated. Back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lippling alround shall be provided at seat and back. Arm rest shall be of black integral skin poly urethane with shore A hardness and reinforced with MS insert. It shall be scratch and wheather resistant. Both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. Rest all as specified / shown in drawing and directed by Engineer-in-Charge.Drg No FD/E6/MAP/12 | 20 | nos | bsohaddoportb@1 | 60 |
| 5 | Receiptical PVC | Receiptical PVC. As per trade pattern. Drg NoFD/E6/MAP/13 | 10 | nos | bsohaddoportb@1 | 60 |
| 6 | Sofa Chair with Cushion | Sofa Chair with Cushion. Over all size of one seat shall be 670 mm long and 530mm high up to arm rest level. All wood shall be of first clas teak wood legs of sofa set shall be 70 mmx35mm in section teak wood. Front legs shall be joined by 100mm x 35 mm in section wooden rail in front. Front and rear legs shall be joint with 100 x 35mm in section wooden rail in side 100mm thick seat cushion and back cushions shall be of size 530mm x 560mm (one numbers in one seat and one number in the back). The cushion shall be of cool foam or any other superior quality foam of 40 density as approved by Engineer-in Charge. Cushion shall be covered with approved colour tapesty cloth as approved by GE. All wood surface exposed to view when placed in position shall be french polish with lacquer finish. Rest all as specified / shown in drawing and directed by Engineer-in-Charge. Drg No FD-281 | 20 | nos | bsohaddoportb@1 | 60 |
| 7 | Table Bed Side | Table Bed Side. Top, sides and front shall be 18mm thick exterior grade MDF board one side laminated, as approved by GE, duly covered with 4mm thick half round teak wood beading in matching shade with synthetic adhesive (Fevicol SH). Both drawer shall be 12mm thick BWR grade plywood and shall be supported with telescopic channel for smooth functioning. All steel surface shall be finished with (Black colour or as approved GE) two coats of synthetic enamel paint upto obtaining glossy finishng over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper Rest all as specified/ shown in drawing and directed by Enginer-in-Charge. Drg No FD/E6/MAP/15(R) | 10 | nos | bsohaddoportb@1 | 60 |
| 8 | Table Centre two tier | Table Centre two tier. Over all size shall be 900mm long 450mm wide and 400mm high. All wood shall be of teak wood. Top of the table shall be of 12mm thick glass of approved shade. Legs shall be made out of 60mmx 30mm in section teak wood and 356mm high, Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs,widthwise at 100mm above the bottom of legs. The bottom tier shall be fixed on the top of bottom side rails with 50mm long screws. The bottom tier shal be of 19mm thick prelaminated particle boards exterior grade of approved shade with 4mm thick teak wood beading all round the edges of both the top 25mm dia hard rubber/PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screw. All wood surfaces shall be french polished with high gloss finish.Rest all as specified/ shown in drawing and directed by Enginer-in-Charge. Drg No FD-393 | 10 | nos | bsohaddoportb@1 | 60 |
| 9 | Table Dressing Ladies Including Stool | Table Dressing Ladies Including Stool. The body of table and stool shall be 18m thick exterior grade pre-laminated MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). Drawers shall be supported with telescopic ball bearing channel for smooth functioning. Shutter shallbe fixed with SS piano hinges and magnetic catcher. Mirror frame shall be first class teak wood free from knots and defects. All wooden surface shall be french polished with glossy finish shade as approved by GE Rest. all as specified/ Shown in drawing and directed by Enginer-in-Charge. Drg No FD/MAP-II/07 | 10 | nos | bsohaddoportb@1 | 60 |
| 10 | Peg table | Peg table. All wood shall seasoned first class teak wood free from knots and defects. Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. H Type leg stiffeners shall be provided for better support. Top shall be 18 mm thick exterior grade MDF board one side laminated in light Wallnut shade or as approved by GE, duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive(Fevicol SH). All wood surfaces shall be french polished with high glossy finish. Rest all as specified/ shown in drawing and directed by Enginer-in-Charge.Drg No FD-382 | 10 | nos | bsohaddoportb@1 | 60 |
| 11 | Table Writing. | Table Writing. All wood shall be of seasoned 1st class hardwood teakwood. Legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. Top of tables shall be of 18mm thick pre-laminated MDF board with 4mm teak wood edging all round the top of table. Two short stiffeners of teakwood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. Sides of the box which house the drawers and cabinet shall be 18mm thick pre-laminated particle board exterior grade. Sides and back of drawers shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6mm thick plywood commercial 6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter 25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. Rest. all as specified/ Shown in drawing and directed by Enginer-in-Charge. Drg No FD-275 | 10 | nos | bsohaddoportb@1 | 60 |
Required Documents
1
Experience Criteria
2
Past Performance
3
Bidder Turnover
4
Certificate (Requested in ATC)
5
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
6
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | 100KEYS TRADECOM PRIVATE LIMITED Under PMA | - | 20-08-2025 09:25:38 | Qualified |
| 2 | M/s.SUSANTA ENTERPRISES AND SUSANTA FURNITURE WORKS Under PMA | - | 21-08-2025 07:21:13 | Qualified |
| 3 | Mansarover Industrial Corporation Under PMA | - | 19-08-2025 14:39:13 | Qualified |
| 4 | MS ENTERPRISE Under PMA | - | 21-08-2025 09:17:23 | Disqualified |
| 5 | SAHAYTA ENTERPRISES Under PMA | - | 21-08-2025 07:52:33 | Disqualified |
| 6 | SALCON ENGINEERS AND FABRICATORS Under PMA | - | 16-08-2025 20:14:28 | Qualified |
| 7 | SHARMA TRADER Under PMA | - | 12-08-2025 23:13:01 | Disqualified |
Financial Results
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | SALCON ENGINEERS AND FABRICATORS(MSE,MII)( MSE Social Category:General ) Under PMA | ₹8,82,000 | Item Categories : Almirah Large Steel,Bath Stool PVC,Bed hard,Chair writing,Receiptical PVC,Sofa Chair with Cushion,T |
| L2 | M/s.SUSANTA ENTERPRISES AND SUSANTA FURNITURE WORKS (MSE,MII)( MSE Social Category:General ) Under PMA | ₹8,95,000 | Item Categories : Almirah Large Steel,Bath Stool PVC,Bed hard,Chair writing,Receiptical PVC,Sofa Chair with Cushion,T |
| L3 | 100KEYS TRADECOM PRIVATE LIMITED (MSE,MII)( MSE Social Category:OBC ) Under PMA | ₹11,38,500 | Item Categories : Almirah Large Steel,Bath Stool PVC,Bed hard,Chair writing,Receiptical PVC,Sofa Chair with Cushion,T |
| L4 | Mansarover Industrial Corporation (MSE,MII)( MSE Social Category:General ) Under PMA | ₹14,64,500 | Item Categories : Almirah Large Steel,Bath Stool PVC,Bed hard,Chair writing,Receiptical PVC,Sofa Chair with Cushion,T |
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 5
GeM-Bidding-8125210.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS