GEM

Invitation to Bid - Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Plasticized PVC Tapes wit in LUDHIANA, PUNJAB

Bid Publish Date

22-May-2026, 3:02 pm

Bid End Date

01-Jun-2026, 3:00 pm

EMD

₹1,02,000

Location

LUDHIANA , PUNJAB

Corrigendum Updated WhatsApp Generate Docs

Progress

Issue22-May-2026, 3:02 pm

Corrigendum23-May-2026

Reverse AuctionCompleted

AwardCompleted

Explore all 4 tabs to view complete tender details

Quantity

5205

Categories 55

FLUID MECHANICS EQUIPMENT AD FILM ELECTRICAL SLUICE VALVE FALL PROTECTION LANYARD BARITONE HORNS RF PASSIVE COMPONENTS MISCELLANEOUS VALVE COPPER COIL ANGLE GLOBE VALVES VALVES ALLOY CAPACITORS POWER WIRE GATE VALVES SANITARY WARE ELECTROMECHANICAL MACHINERY AIR COOLED ENGINE ELECTRICAL PRODUCTS VALVE SANITARY FITTING ENT EQUIPMENT ARC VALVE ELECTRONIC COMPONENTS AND SUPPLIES SUBSTATION GEYSER SUPPLY OF POWER COMMUNICATION PROTOCOL ADHESIVE SLIDER VALVES DISCRETE COMPONENTS TELECOM EQUIPMENT COPPER ALLOY TRANSITION METALS BOILER MOUNTING VALVE CIRCUIT BREAKERS MCCB ELECTRICAL AND ELECTRONIC ENGINEERING CABLE WATER TRANSMISSION PLASTIC COPPER SHEET VALVE PARTS AND ACCESSORIES CONDUCTOR VIDEO FILM BOILER VALVE ELECTRICAL DISTRIBUTION SYSTEM PIPES FAN METAL PRODUCTS METALLURGY ELECTRICAL PLUGS HIGH TENSION PANEL HYDRAULIC BRAKE SWITCH GEAR

Indian Army announces a tender for Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854 (Q2), Plasticized PVC Tapes with Non- Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS 7809 (Part 3/ Sec1) (Q2), Elecric Bells and Accessories as per IS 2268 (Q3), Capacitors for Electric Fan Motors as per IS 1709 (V2) (Q3), Electrical Plugs (V2) ISI Marked to IS 1293 (Q2), Non Modular Piano Type Domestic Electrical Sockets ISI Marked To IS 1293 (Q2), PVC Insulated Unsheathed Cable with Flexible Conductor ISI Marked To IS 694 (Q2), Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1) (Q2), Moulded Case Circuit Breakers (MCCB) Conforming To IS/IEC 60947 (Part 2) (Q2), Metal Alloy Casting Water Tap with Aerator (V2) (Q3), Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3), Ceramic ( Vitreous China) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3), Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3), Connector Pipes for Washbasins/ Sinks/ Geyser (Q3), Health Faucet (Q3), Soap Dish - Case (Q4) in LUDHIANA, PUNJAB. Quantity: 5205. Submission Deadline: 01-06-2026 15: 00: 00. Last date to apply is approaching fast!

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854 (Q2) , Plasticized PVC Tapes with Non- Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS 7809 (Part 3/ Sec1) (Q2) , Elecric Bells and Accessories as per IS 2268 (Q3) , Capacitors for Electric Fan Motors as per IS 1709 (V2) (Q3) , Electrical Plugs (V2) ISI Marked to IS 1293 (Q2) , Non Modular Piano Type Domestic Electrical Sockets ISI Marked To IS 1293 (Q2) , PVC Insulated Unsheathed Cable with Flexible Conductor ISI Marked To IS 694 (Q2) , Miniature Circuit Breakers (MCB) for AC Operation Marked To IS/IEC 60898 (Part 1) (Q2) , Moulded Case Circuit Breakers (MCCB) Conforming To IS/IEC 60947 (Part 2) (Q2) , Metal Alloy Casting Water Tap with Aerator (V2) (Q3) , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming to IS 778 (Q3) , Ceramic ( Vitreous China ) Flushing Cisterns for Water Closets and Urinals conforming to IS 774 (Q3) , Plastic Seats and Covers for Water - Closets as per IS 2548 (Q3) , Connector Pipes for Washbasins/ Sinks/ Geyser (Q3) , Health Faucet (Q3) , Soap Dish - Case (Q4)

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 42

GeM-Bidding-9330576.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

CATALOG-Specification-15

CATALOG Specification

CATALOG-Specification-16

CATALOG Specification

CATALOG-Specification-17

CATALOG Specification

CATALOG-Specification-18

CATALOG Specification

CATALOG-Specification-19

CATALOG Specification

CATALOG-Specification-20

CATALOG Specification

CATALOG-Specification-21

CATALOG Specification

CATALOG-Specification-22

CATALOG Specification

CATALOG-Specification-23

CATALOG Specification

CATALOG-Specification-24

CATALOG Specification

CATALOG-Specification-25

CATALOG Specification

CATALOG-Specification-26

CATALOG Specification

CATALOG-Specification-27

CATALOG Specification

CATALOG-Specification-28

CATALOG Specification

CATALOG-Specification-29

CATALOG Specification

CATALOG-Specification-30

CATALOG Specification

CATALOG-Specification-31

CATALOG Specification

CATALOG-Specification-32

CATALOG Specification

CATALOG-Specification-33

CATALOG Specification

CATALOG-Specification-34

CATALOG Specification

CATALOG-Specification-35

CATALOG Specification

CATALOG-Specification-36

CATALOG Specification

CATALOG-Specification-37

CATALOG Specification

CATALOG-Specification-38

CATALOG Specification

CATALOG-Specification-39

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Category	Specification	Requirement
Generic	Rated Current	6A
Generic	Nature of Switch	1 way switch
Switch Classification	Type of Terminal Connection	Screw type terminal
Switch Classification	Number of poles	Single pole
Construction	Current Carrying Contact Material	Brass

Category	Specification	Requirement
Specification	Governing Specification	As per IS 7809 (Part 3/ Sec1)
Classification	Type	General Purpose Type (suitable for application at temperature above 0°C, and designated as F-PVCp/90/0/Tp)
Dimension	Length of tape in a roll (in metre)	25
Dimension	Width of tape (in mm) (Tolerance as per clause 6.2.1 of the IS 7809 (part1))	20
Dimension	Thickness (in mm) (Tolerance ± 0.025 mm)	0.125
Generic	Appearance of tape	Translucent, Opaque

Category	Specification	Requirement
GENERIC	Product ISI marked	NO - But conforming to IS:2268
GENERIC	Type of bell	Ding Dong type

Category	Specification	Requirement
Generic	Type of Capacitor	Self Healing Capacitor
Generic	Rated Capacitance of the fan capacitor (µF)	3.0
Generic	Terminal of Capacitor	Lead

Category	Specification	Requirement
CONSTRUCTION	Number of poles	2 Pole + Earth
CONSTRUCTION	Rated Current (in A)	16 A
CONSTRUCTION	Number of Pins	3
CONSTRUCTION	Plug Classification	For Class 1 Appliances

Category	Specification	Requirement
Performance Parameters	Rated Current	16.0
Performance Parameters	Number of Pins	6 Or higher
Performance Parameters	Provision of Safety Shutter in Socket	Without Shutter
Generic	Current Carrying Material	Brass
Generic	Type of Terminal Connection	Screw Type Terminal
Generic	Earthing Contact Provided	With

Category	Specification	Requirement
CONSTRUCTION	Cable category	FR
CONSTRUCTION	Number of Core	1
CONSTRUCTION	Nominal Area of Conductor (in Sq mm)	1
CONSTRUCTION	Type of Insulation	Type D
MARKING	Marking on the Cable	Printed

Category	Specification	Requirement
CONSTRUCTION	Cable category	FR-LSH
CONSTRUCTION	Number of Core	1
CONSTRUCTION	Nominal Area of Conductor (in Sq mm)	6
CONSTRUCTION	Type of Insulation	Type D
MARKING	Marking on the Cable	Printed

Category	Specification	Requirement
RATING	Number of Pole (Hint: "P" - Pole; "PP" - Protected Pole)	1 P
RATING	Rated Current (in Ampere)	6
RATING	Instantaneous Tripping Current Type	C
RATING	Rated Short Circuit Capacity (in Ampere)	1500
CONSTRUCTION	Provision of Steel Sheet Enclosure for MCB	Without enclosure

Category	Specification	Requirement
GENERIC	Rated Current (in Ampere)	100A
GENERIC	Number of Poles	4 Pole
GENERIC	Rated Breaking Current (in KA)	25 KA

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	15 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stem, hinge pin and plug	Forged Brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	9.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	3.7 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	11.5 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	8 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	26 mm
Dimensions	Dimensions of Stuffing box (in mm)	As per Table 8 of IS 778
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	NA for Screwed Valves

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	20 mm
Generic	Pressure Classification	Class 2 Valve : Suitable for cold working pressure up to 1.6 MPa
Generic	Gate Valve Type	Split Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - on bonnet integral seats
Material & Manufacture	Material of Body	Leaded tin bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Bonnet/Cover Material	Forged brass (conforming to CuZn,2Pb2 of IS 3288)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Leaded Tin Bronze (conforming to LTB 2 of IS 318)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	10.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.1 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	9 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	32 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778, NA for Screwed Valves

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	25 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	12.0 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	4.6 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	13.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	10 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	39 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778
Preparation	Preparation	As per Clause 12 of IS 778

Category	Specification	Requirement
Generic	Conformity to IS 778	Yes
Generic	End Connection	Screwed Ends
Generic	Nominal Size of Valves (in mm)	40 mm
Generic	Pressure Classification	Class 1 Valve : Suitable for cold working pressure up to 1.0 MPa
Generic	Gate Valve Type	Solid Wedge Type
Material & Manufacture	Bonnet Type/ Design	Screwed - in bonnet integral seats
Material & Manufacture	Material of Body	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Bonnet/Cover Material	Brass (conforming to DCB 2 of IS 1264)
Material & Manufacture	Material of Stuffing box, disc hinge, check nut, stem nut, disc retaining nut, gland, gland nut, gland flange, body seat rings and disc or wedge facing rings (where renewable	Extruded Brass Rod (conforming to Type 1 or Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Stem, hinge pin and plug	Extruded Brass Rod (conforming to Type 2 (Half Hard) of IS 319)
Material & Manufacture	Material of Gland Packing	Hemp and Jute (conforming to IS 5414)
Dimensions	Minimum Length of Threaded Portion at the end (in mm)	13.5 mm
Dimensions	Minimum Thickness at body ends outside of the thread for both Class 1 and Class 2 Valves (in mm)	5.0 mm
Dimensions	Minimum Width of ends for both Class 1 and Class 2 Valves (in mm)	15.0 mm
Dimensions	Minimum Diameter of Stems for Both Class 1 and Class 2 Valves (in mm)	12 mm
Dimensions	Minimum Flat to Flat Size for both Class 1 and Class 2 Valves (in mm)	55 mm
Dimensions	End to End Dimensions of Screwed End Valves (in mm)	As per Table 9 of IS 778
Dimensions	Face to Face Dimensions of Flanged Valves (in mm)	As per Table 11 of IS 778
Preparation	Preparation	As per Clause 12 of IS 778

Category	Specification	Requirement
GENERIC	Rated Current (in Ampere)	125A
GENERIC	Number of Poles	4 Pole
GENERIC	Rated Breaking Current (in KA)	25 KA

Category	Specification	Requirement
GENERIC	Rated Current (in Ampere)	200A
GENERIC	Number of Poles	4 Pole
GENERIC	Rated Breaking Current (in KA)	35 KA

Category	Specification	Requirement
GENERIC	Rated Current (in Ampere)	320A
GENERIC	Number of Poles	4 Pole
GENERIC	Rated Breaking Current (in KA)	35 KA

Category	Specification	Requirement
GENERIC	Rated Current (in Ampere)	400A
GENERIC	Number of Poles	4 Pole
GENERIC	Rated Breaking Current (in KA)	35 KA

Category	Specification	Requirement
ITEM	Tap Mounting Type	Ball tap
Material	Material	Brass
Description	Type of Faucet	Half Turn
Description	Aerator Material	Metal
Dimension	Nominal Thread Size of Tap (mm)	20

Category	Specification	Requirement
Generic	Conformity to IS 774	Yes
Generic	Flushing Device	Cistern
Construction & Material	Material for Flush Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Material for Overflow Pipe	Polyethylene Pipe (Conformity to Is 4984)
Construction & Material	Cistern Discharge Capacity	Full Flush (6 ± 0.5 liters) Reduced Flush (3 ± 0.5 liters)

Category	Specification	Requirement
Material	Materials of Seat and Covers	Polypropylene
Material	Materials of Hinging Device	Mild Steel
RIGIDITY	Seat	Grade 2
RIGIDITY	Cover	Grade 1

Category	Specification	Requirement
Material & Construction	Inner Pipe Material	Silicone Rubber, PVC
Material & Construction	Cover Material	Nylon Braided
Dimensions	Nominal Bore Size (in mm)	12 mm
Dimensions	End Connection Size (in inch)	½ inch,, ¾ inch, ⅜ inch
Dimensions	Pipe Length (Tolerance: ±10 mm)	450 mm
End Connections & Fittings	End Connection Type (Material to be supplied alonwith)	Nut–Nut
End Connections & Fittings	End Fitting Material	Stainless Steel
End Connections & Fittings	Surface Finish	Nickel Plated
End Connections & Fittings	Washer / Gasket Included	Yes
Performance & Usage	Maximum Working Pressure (in bar)	Up to 10 bar
Performance & Usage	Operating Temperature Range (in °C)	Up to 40°C
Performance & Usage	Durability Grade	Medium Duty

Category	Specification	Requirement
ITEM	Tap Mounting Type	Disc tap
Material	Material	Brass
Description	Type of Faucet	Half Turn
Description	Aerator Material	Metal
Dimension	Nominal Thread Size of Tap (mm)	15

Category	Specification	Requirement
Generic	Pressure rating (Bar)	1
Generic	Flow Rate , Minimum (lpm)	8, 9, 10, 11 Or higher
Material & Construction	Material of construction	Brass
Material & Construction	Hose Material	Stainless Steel
Material & Construction	Hose length ( in meters)	1.5
Material & Construction	Handle Type	Lever
Material & Construction	Anti bacterial coating	No

Browse Tenders

Categories

States

Cities

Authorities

Invitation to Bid - Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Plasticized PVC Tapes wit in LUDHIANA, PUNJAB

Categories 55

Additional Tender Data

Commercial Details

Authority Records

BID & GeM Expert Consultancy

Documents 42

GeM-Bidding-9330576.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

CATALOG-Specification-15

CATALOG-Specification-16

CATALOG-Specification-17

CATALOG-Specification-18

CATALOG-Specification-19

CATALOG-Specification-20

CATALOG-Specification-21

CATALOG-Specification-22

CATALOG-Specification-23

CATALOG-Specification-24

CATALOG-Specification-25

CATALOG-Specification-26

CATALOG-Specification-27

CATALOG-Specification-28

CATALOG-Specification-29

CATALOG-Specification-30

CATALOG-Specification-31

CATALOG-Specification-32

CATALOG-Specification-33

CATALOG-Specification-34

CATALOG-Specification-35

CATALOG-Specification-36

CATALOG-Specification-37

CATALOG-Specification-38

CATALOG-Specification-39

Other Documents

GEM General Terms and Conditions Document

Technical Specifications 39 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

Item #21 Details

Item #22 Details

Item #23 Details

Item #24 Details

Item #25 Details

Category	Specification	Requirement
Material	Material of the box	Stainless Steel
Lid Details	Type of Lid	NOT APPLICABLE
Lid Details	Lid type (according to fixation)	DETACHABLE

Rank	Seller	Final Price	Item
L1	PREM ENTERPRISES(MII) Under PMA Winner	₹16,98,990	Item Categories : Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Plasticized PVC Tapes wit
L2	PANAV CONSTRUCTION COMPANY (MII) Under PMA	₹19,48,040	Item Categories : Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Plasticized PVC Tapes wit
L3	JAGDEEP ENTERPRISES (MII) Under PMA	₹20,12,763	Item Categories : Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854,Plasticized PVC Tapes wit