GEM

Open Tender for Non Sparking Combination Spanners (V2),Non Sparking Combination Spanners (V2),Non Sparking Combinat in KHAMMAM, TELANGANA

Bid Publish Date

12-Feb-2026, 4:37 pm

Bid End Date

28-Feb-2026, 2:00 pm

Location

KHAMMAM , TELANGANA

Progress

Issue12-Feb-2026, 4:37 pm

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

Documents 9

GeM-Bidding-8922461.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Non Sparking Pipe Wrench (V2)

Rail Coach Factory Kapurthala

KAPURTHALA, PUNJAB

Posted: 9 June 2025

Closed: 4 July 2025

GEM

Indian Air Force Non Sparking Double Open Ended Spanner (V2) Tender 2025 Department of Military Affairs – Q2

Indian Air Force

Posted: 12 December 2025

Closed: 19 December 2025

GEM

Non Sparking Double Ended Ring Spanner (V2)

Eastern Railway

KOLKATA, WEST BENGAL

Posted: 2 December 2025

Closed: 12 December 2025

GEM

Non Sparking Double Ended Ring Spanner (V2)

Eastern Railway

HOWRAH, WEST BENGAL

Posted: 10 December 2025

Closed: 22 December 2025

GEM

Eastern Railway Non Sparking Double Ended Ring Spanner Tender Sealdah Kolkata 2025

Eastern Railway

KOLKATA, WEST BENGAL

Posted: 2 December 2025

Closed: 12 December 2025

GEM

Technical Specifications 6 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Standard Parameters	Governing Standard	Non Sparking Combination Spanners generally conforming IS 4595-1969 (General requirements for non-sparking tools) with latest amendement
Standard Parameters	Application /Scope	Non-sparking tools are made of metals that do not produce sparks when come in contact with steel, iron or other metals specially used in Petrochemical/Gas/Ammunition Industries, Mines etc.
Material Parameters	Material type/Chemical composition	Copper Titanium having composition (Copper 95-96% & Titanium 5-4%)
Material Parameters	Tensile Strength	1250 N/mm2 (or equivalent in other units), 70 kgf/mm2 (or equivalent in other units)
Material Parameters	Hardness	30-40 HRC ( or equivalent in other units), 190-376 HV (or equivalent in other units)
Material Parameters	Magnetic Permeability	Less than 1.02
Dimemsions Parameters	Nominal Size (in mm)	20
Dimemsions Parameters	Length (in mm)	190
Buyer specific requiremts	Buyer specific general technical requirements (GTR)	Tools tested and certified as per IS 4595-1969 (latest) Standard, The tools are non-sparking and non-magnetic and have good finish, The tools are not provided with any coatings, Tools are Corrosion resistant suitable for application in corrosive environments, Quality Assurance-QAP (Quality Assurance Provisions ) submit after award of work and approved by buyer and inspection carried out by Buyer approved agency, Performance Guarantee-The guarantee of design, material & workmanship of the Non-Sparking Tools provided for a period of 12 months from the date of supply and any Mechanical/ Manufacturing defect &/or faulty workmanship found during this period are replaced ) without any extra cost to Buyer within 15 days of the intimation, Marking -Marking are done on the surface of Non Sparking Tools as per IS-4595-Latest Standard and following information provided a) Manufacturer's Name b) Size /Capacity c) Name, abbreviation or chemical symbol of the alloy used in the manufacturing of the tool, Packaging -The tool/tool set supply in a easy to carry and durable pouch made of suitable material and should consist of one number each of items in case tool set, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time of bidding along with offer	Test Report for Chemical composition of material to be used in making non-sparking tools, Test Report for Hardness and tensile strength of non-sparking material,, Test Report for Magnetic Permeability of non-sparking material, Test report of Sparking Test details as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time at time of supply	Material test certificates, Hardness and tensile strength Test report, Dimensional details report, Visual check report, Guarantee Certificate, Magnetic Permeability Test report, Sparking test as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, Advice/ precautions which are to be taken during use of Non Sparking tools, NA
Buyer specific requiremts	Additional requirments	NA
Certification &Test Report	Warranty in years	1
Certification &Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per specification	OEM, Govt Lab, NABL accredited lab, ILAC accredited lab , NA
Certification &Test Report	Agree to provide all relavant documents Test Reports/suuporting document /reports etc to the buyer at the time of bidding or on demand	Yes

Item #2 Details

View Catalog

Category	Specification	Requirement
Standard Parameters	Governing Standard	Non Sparking Combination Spanners generally conforming IS 4595-1969 (General requirements for non-sparking tools) with latest amendement
Standard Parameters	Application /Scope	Non-sparking tools are made of metals that do not produce sparks when come in contact with steel, iron or other metals specially used in Petrochemical/Gas/Ammunition Industries, Mines etc.
Material Parameters	Material type/Chemical composition	Copper Titanium having composition (Copper 95-96% & Titanium 5-4%)
Material Parameters	Tensile Strength	1250 N/mm2 (or equivalent in other units), 70 kgf/mm2 (or equivalent in other units)
Material Parameters	Hardness	30-40 HRC ( or equivalent in other units), 190-376 HV (or equivalent in other units)
Material Parameters	Magnetic Permeability	Less than 1.02
Dimemsions Parameters	Nominal Size (in mm)	22
Dimemsions Parameters	Length (in mm)	230
Buyer specific requiremts	Buyer specific general technical requirements (GTR)	Tools tested and certified as per IS 4595-1969 (latest) Standard, The tools are non-sparking and non-magnetic and have good finish, The tools are not provided with any coatings, Tools are Corrosion resistant suitable for application in corrosive environments, Quality Assurance-QAP (Quality Assurance Provisions ) submit after award of work and approved by buyer and inspection carried out by Buyer approved agency, Performance Guarantee-The guarantee of design, material & workmanship of the Non-Sparking Tools provided for a period of 12 months from the date of supply and any Mechanical/ Manufacturing defect &/or faulty workmanship found during this period are replaced ) without any extra cost to Buyer within 15 days of the intimation, Marking -Marking are done on the surface of Non Sparking Tools as per IS-4595-Latest Standard and following information provided a) Manufacturer's Name b) Size /Capacity c) Name, abbreviation or chemical symbol of the alloy used in the manufacturing of the tool, Packaging -The tool/tool set supply in a easy to carry and durable pouch made of suitable material and should consist of one number each of items in case tool set, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time of bidding along with offer	Test Report for Chemical composition of material to be used in making non-sparking tools, Test Report for Hardness and tensile strength of non-sparking material,, Test Report for Magnetic Permeability of non-sparking material, Test report of Sparking Test details as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time at time of supply	Material test certificates, Hardness and tensile strength Test report, Dimensional details report, Visual check report, Guarantee Certificate, Magnetic Permeability Test report, Sparking test as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, Advice/ precautions which are to be taken during use of Non Sparking tools, NA
Buyer specific requiremts	Additional requirments	NA
Certification &Test Report	Warranty in years	1
Certification &Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per specification	OEM, Govt Lab, NABL accredited lab, ILAC accredited lab , NA
Certification &Test Report	Agree to provide all relavant documents Test Reports/suuporting document /reports etc to the buyer at the time of bidding or on demand	Yes

Item #3 Details

View Catalog

Category	Specification	Requirement
Standard Parameters	Governing Standard	Non Sparking Combination Spanners generally conforming IS 4595-1969 (General requirements for non-sparking tools) with latest amendement
Standard Parameters	Application /Scope	Non-sparking tools are made of metals that do not produce sparks when come in contact with steel, iron or other metals specially used in Petrochemical/Gas/Ammunition Industries, Mines etc.
Material Parameters	Material type/Chemical composition	Copper Titanium having composition (Copper 95-96% & Titanium 5-4%)
Material Parameters	Tensile Strength	1250 N/mm2 (or equivalent in other units), 70 kgf/mm2 (or equivalent in other units)
Material Parameters	Hardness	30-40 HRC ( or equivalent in other units), 190-376 HV (or equivalent in other units)
Material Parameters	Magnetic Permeability	Less than 1.02
Dimemsions Parameters	Nominal Size (in mm)	24
Dimemsions Parameters	Length (in mm)	251
Buyer specific requiremts	Buyer specific general technical requirements (GTR)	Tools tested and certified as per IS 4595-1969 (latest) Standard, The tools are non-sparking and non-magnetic and have good finish, The tools are not provided with any coatings, Tools are Corrosion resistant suitable for application in corrosive environments, Quality Assurance-QAP (Quality Assurance Provisions ) submit after award of work and approved by buyer and inspection carried out by Buyer approved agency, Performance Guarantee-The guarantee of design, material & workmanship of the Non-Sparking Tools provided for a period of 12 months from the date of supply and any Mechanical/ Manufacturing defect &/or faulty workmanship found during this period are replaced ) without any extra cost to Buyer within 15 days of the intimation, Marking -Marking are done on the surface of Non Sparking Tools as per IS-4595-Latest Standard and following information provided a) Manufacturer's Name b) Size /Capacity c) Name, abbreviation or chemical symbol of the alloy used in the manufacturing of the tool, Packaging -The tool/tool set supply in a easy to carry and durable pouch made of suitable material and should consist of one number each of items in case tool set, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time of bidding along with offer	Test Report for Chemical composition of material to be used in making non-sparking tools, Test Report for Hardness and tensile strength of non-sparking material,, Test Report for Magnetic Permeability of non-sparking material, Test report of Sparking Test details as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time at time of supply	Material test certificates, Hardness and tensile strength Test report, Dimensional details report, Visual check report, Guarantee Certificate, Magnetic Permeability Test report, Sparking test as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, Advice/ precautions which are to be taken during use of Non Sparking tools, NA
Buyer specific requiremts	Additional requirments	NA
Certification &Test Report	Warranty in years	1
Certification &Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per specification	OEM, Govt Lab, NABL accredited lab, ILAC accredited lab , NA
Certification &Test Report	Agree to provide all relavant documents Test Reports/suuporting document /reports etc to the buyer at the time of bidding or on demand	Yes

Item #4 Details

View Catalog

Category	Specification	Requirement
Standard Parameters	Governing Standard	Non Sparking Combination Spanners generally conforming IS 4595-1969 (General requirements for non-sparking tools) with latest amendement
Standard Parameters	Application /Scope	Non-sparking tools are made of metals that do not produce sparks when come in contact with steel, iron or other metals specially used in Petrochemical/Gas/Ammunition Industries, Mines etc.
Material Parameters	Material type/Chemical composition	Copper Titanium having composition (Copper 95-96% & Titanium 5-4%)
Material Parameters	Tensile Strength	1250 N/mm2 (or equivalent in other units), 70 kgf/mm2 (or equivalent in other units)
Material Parameters	Hardness	30-40 HRC ( or equivalent in other units), 190-376 HV (or equivalent in other units)
Material Parameters	Magnetic Permeability	Less than 1.02
Dimemsions Parameters	Nominal Size (in mm)	27
Dimemsions Parameters	Length (in mm)	278
Buyer specific requiremts	Buyer specific general technical requirements (GTR)	Tools tested and certified as per IS 4595-1969 (latest) Standard, The tools are non-sparking and non-magnetic and have good finish, The tools are not provided with any coatings, Tools are Corrosion resistant suitable for application in corrosive environments, Quality Assurance-QAP (Quality Assurance Provisions ) submit after award of work and approved by buyer and inspection carried out by Buyer approved agency, Performance Guarantee-The guarantee of design, material & workmanship of the Non-Sparking Tools provided for a period of 12 months from the date of supply and any Mechanical/ Manufacturing defect &/or faulty workmanship found during this period are replaced ) without any extra cost to Buyer within 15 days of the intimation, Marking -Marking are done on the surface of Non Sparking Tools as per IS-4595-Latest Standard and following information provided a) Manufacturer's Name b) Size /Capacity c) Name, abbreviation or chemical symbol of the alloy used in the manufacturing of the tool, Packaging -The tool/tool set supply in a easy to carry and durable pouch made of suitable material and should consist of one number each of items in case tool set, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time of bidding along with offer	Test Report for Chemical composition of material to be used in making non-sparking tools, Test Report for Hardness and tensile strength of non-sparking material,, Test Report for Magnetic Permeability of non-sparking material, Test report of Sparking Test details as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time at time of supply	Material test certificates, Hardness and tensile strength Test report, Dimensional details report, Visual check report, Guarantee Certificate, Magnetic Permeability Test report, Sparking test as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, Advice/ precautions which are to be taken during use of Non Sparking tools, NA
Buyer specific requiremts	Additional requirments	NA
Certification &Test Report	Warranty in years	1
Certification &Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per specification	OEM, Govt Lab, NABL accredited lab, ILAC accredited lab , NA
Certification &Test Report	Agree to provide all relavant documents Test Reports/suuporting document /reports etc to the buyer at the time of bidding or on demand	Yes

Item #5 Details

View Catalog

Category	Specification	Requirement
Standard Parameters	Governing Standard	Non Sparking Combination Spanners generally conforming IS 4595-1969 (General requirements for non-sparking tools) with latest amendement
Standard Parameters	Application /Scope	Non-sparking tools are made of metals that do not produce sparks when come in contact with steel, iron or other metals specially used in Petrochemical/Gas/Ammunition Industries, Mines etc.
Material Parameters	Material type/Chemical composition	Copper Titanium having composition (Copper 95-96% & Titanium 5-4%)
Material Parameters	Tensile Strength	1250 N/mm2 (or equivalent in other units), 70 kgf/mm2 (or equivalent in other units)
Material Parameters	Hardness	30-40 HRC ( or equivalent in other units), 190-376 HV (or equivalent in other units)
Material Parameters	Magnetic Permeability	Less than 1.02
Dimemsions Parameters	Nominal Size (in mm)	30
Dimemsions Parameters	Length (in mm)	304
Buyer specific requiremts	Buyer specific general technical requirements (GTR)	Tools tested and certified as per IS 4595-1969 (latest) Standard, The tools are non-sparking and non-magnetic and have good finish, The tools are not provided with any coatings, Tools are Corrosion resistant suitable for application in corrosive environments, Quality Assurance-QAP (Quality Assurance Provisions ) submit after award of work and approved by buyer and inspection carried out by Buyer approved agency, Performance Guarantee-The guarantee of design, material & workmanship of the Non-Sparking Tools provided for a period of 12 months from the date of supply and any Mechanical/ Manufacturing defect &/or faulty workmanship found during this period are replaced ) without any extra cost to Buyer within 15 days of the intimation, Marking -Marking are done on the surface of Non Sparking Tools as per IS-4595-Latest Standard and following information provided a) Manufacturer's Name b) Size /Capacity c) Name, abbreviation or chemical symbol of the alloy used in the manufacturing of the tool, Packaging -The tool/tool set supply in a easy to carry and durable pouch made of suitable material and should consist of one number each of items in case tool set, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time of bidding along with offer	Test Report for Chemical composition of material to be used in making non-sparking tools, Test Report for Hardness and tensile strength of non-sparking material,, Test Report for Magnetic Permeability of non-sparking material, Test report of Sparking Test details as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time at time of supply	Material test certificates, Hardness and tensile strength Test report, Dimensional details report, Visual check report, Guarantee Certificate, Magnetic Permeability Test report, Sparking test as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, Advice/ precautions which are to be taken during use of Non Sparking tools, NA
Buyer specific requiremts	Additional requirments	NA
Certification &Test Report	Warranty in years	1
Certification &Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per specification	OEM, Govt Lab, NABL accredited lab, ILAC accredited lab , NA
Certification &Test Report	Agree to provide all relavant documents Test Reports/suuporting document /reports etc to the buyer at the time of bidding or on demand	Yes

Item #6 Details

View Catalog

Category	Specification	Requirement
Standard Parameters	Governing Standard	Non Sparking Combination Spanners generally conforming IS 4595-1969 (General requirements for non-sparking tools) with latest amendement
Standard Parameters	Application /Scope	Non-sparking tools are made of metals that do not produce sparks when come in contact with steel, iron or other metals specially used in Petrochemical/Gas/Ammunition Industries, Mines etc.
Material Parameters	Material type/Chemical composition	Copper Titanium having composition (Copper 95-96% & Titanium 5-4%)
Material Parameters	Tensile Strength	1250 N/mm2 (or equivalent in other units), 70 kgf/mm2 (or equivalent in other units)
Material Parameters	Hardness	30-40 HRC ( or equivalent in other units), 190-376 HV (or equivalent in other units)
Material Parameters	Magnetic Permeability	Less than 1.02
Dimemsions Parameters	Nominal Size (in mm)	32
Dimemsions Parameters	Length (in mm)	320
Buyer specific requiremts	Buyer specific general technical requirements (GTR)	Tools tested and certified as per IS 4595-1969 (latest) Standard, The tools are non-sparking and non-magnetic and have good finish, The tools are not provided with any coatings, Tools are Corrosion resistant suitable for application in corrosive environments, Quality Assurance-QAP (Quality Assurance Provisions ) submit after award of work and approved by buyer and inspection carried out by Buyer approved agency, Performance Guarantee-The guarantee of design, material & workmanship of the Non-Sparking Tools provided for a period of 12 months from the date of supply and any Mechanical/ Manufacturing defect &/or faulty workmanship found during this period are replaced ) without any extra cost to Buyer within 15 days of the intimation, Marking -Marking are done on the surface of Non Sparking Tools as per IS-4595-Latest Standard and following information provided a) Manufacturer's Name b) Size /Capacity c) Name, abbreviation or chemical symbol of the alloy used in the manufacturing of the tool, Packaging -The tool/tool set supply in a easy to carry and durable pouch made of suitable material and should consist of one number each of items in case tool set, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time of bidding along with offer	Test Report for Chemical composition of material to be used in making non-sparking tools, Test Report for Hardness and tensile strength of non-sparking material,, Test Report for Magnetic Permeability of non-sparking material, Test report of Sparking Test details as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, NA
Buyer specific requiremts	Seller agree to furnished Documents/ Test Reports at the time at time of supply	Material test certificates, Hardness and tensile strength Test report, Dimensional details report, Visual check report, Guarantee Certificate, Magnetic Permeability Test report, Sparking test as per IS:4595 (latest), Certificate from manufacturer that the non-sparking tools are safe for use in hazardous area classification conforming to Zone 0 , Gas group IIC hazardous area, Advice/ precautions which are to be taken during use of Non Sparking tools, NA
Buyer specific requiremts	Additional requirments	NA
Certification &Test Report	Warranty in years	1
Certification &Test Report	Type of lab which carried out Test of Complete Product to prove the conformity of product as per specification	OEM, Govt Lab, NABL accredited lab, ILAC accredited lab , NA
Certification &Test Report	Agree to provide all relavant documents Test Reports/suuporting document /reports etc to the buyer at the time of bidding or on demand	Yes

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

TELANGANA State tenders

KHAMMAM , TELANGANA City tenders

Unlock Tender Documents

Performance Analytics

7-metric analysis with year-wise breakdown

Competitor Intelligence

Multi-dimensional analysis across 6 parameters

Market Penetration

By department, ministry, geography & category

Historical Analysis

Complete tender history with results

Documents 9

GeM-Bidding-8922461.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Browse Tenders

Categories

States

Cities

Authorities

Open Tender for Non Sparking Combination Spanners (V2),Non Sparking Combination Spanners (V2),Non Sparking Combinat in KHAMMAM, TELANGANA

Documents 9

GeM-Bidding-8922461.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Non Sparking Pipe Wrench (V2)

Indian Air Force Non Sparking Double Open Ended Spanner (V2) Tender 2025 Department of Military Affairs – Q2

Non Sparking Double Ended Ring Spanner (V2)

Non Sparking Double Ended Ring Spanner (V2)

Eastern Railway Non Sparking Double Ended Ring Spanner Tender Sealdah Kolkata 2025

Technical Specifications 6 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Explore More Opportunities

Unlock Tender Documents

Documents 9

GeM-Bidding-8922461.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Documents

Unlock All Documents

GeM-Bidding-8922461.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

Buyer uploaded ATC document

GEM General Terms and Conditions Document

Never Miss a Tender!

Tender Alerts

Where should we send alerts?

✓ Alert Setup Complete!