Directorate Of Municipal Administration Truck Mounted Suction Cum Jetting Machine Karnataka GADAG 2025 Tender
Directorate Of Municipal Administration
GADAG, KARNATAKA
Posted:
20 December 2025
Closed:
30 December 2025
GEM
GEM
Barpeta Municipal Board Truck Mounted Suction Cum Jetting Machine Tender Assam IS:13496 IS:11387 2026
Progress
Issue28-May-2026, 7:44 pm
AwardPending
Quantity
1
Bid Type
Two Packet Bid
Categories
2
Tender Overview
The Barpeta Municipal Board, under the Urban Development Department Assam, is inviting bids for a Truck Mounted Suction Cum Jetting Machine to service sewer lines and storm drains in BARPETA, ASSAM 781301. The procurement requires IS:13496 general requirements for suction machines and IS:11387 jetting standards, with an EMD of ₹90,000. The bid allows a 25% quantity variation at contract award and during the contract period, at contracted rates. The OEM turnover criteria apply, with three years of audited financials or CA/Cost Accountant certificates. The supplier must furnish all test reports on demand. This project emphasizes certified performance and compliance with designated standards for sewer cleaning equipment.
Key Specifications
-
IS:13496 conformance for suction machines
-
IS:11387 conformance for high pressure jetting
-
Suction: vacuum capacity (m³/hr) and suction depth (m)
-
Suction hose length and inner diameter (mm, exact values)
-
Jetting: pump type, max pressure (bar), water flow rate (LPM, exact value)
-
Jetting hose length and inner diameter (mm, exact value)
-
Tank: sludge/fresh water capacities (L); tank material, thickness, tipping mechanism
-
Base vehicle: GVW, fuel type, axle config, max power (kW), emission compliance, driver cabin A/C
Terms & Conditions
-
25% quantity variation right to the purchaser at contract placement and during currency
-
Turnover requirements with audited statements or CA/Cost Accountant certificate
-
OEM turnover criteria for primary product category in bunch bids
Important Clauses
Payment Terms
Not explicitly stated; bidders should assume standard government terms post-delivery acceptance
Delivery Schedule
Delivery period to commence from the last date of original delivery order; extended delivery time formula applies with minimum 30 days
Penalties/Liquidated Damages
No explicit LD percentage provided; ensure readiness for contractually defined LDs per ATC
Bidder Eligibility
-
Minimum average annual turnover as per bid document for last 3 years
-
OEM turnover meeting required threshold for primary product category
-
Submission of mandatory test reports and certification documents
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Truck Mounted Suction Cum Jetting Machine (Q2)
Authority Records
URBAN DEVELOPMENT DEPARTMENT
Free Trial Available
Win more tenders with
real-time intelligence
Trusted by 5,000+ companies to find, track, and win government tenders.
Smart Alerts
Daily matched tenders to your inbox
Bid Results
See L1 winners & actual prices paid
Competitor Intel
Track rival companies & win patterns
Price Intelligence
BOQ rate trends to benchmark your bid
Book a Free Demo
See TenderDekho in action
Our team will walk you through the platform and help set up your profile — free, no commitment.
Demo booked!
Our team will reach out to schedule your free session.
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Bid Preparation
GeM Registration
Document Filing
Free consultation · 24h response
Documents 3
GeM-Bidding-9392187.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Truck Mounted Suction Cum Jetting Machine
Directorate Of Municipalities
AHMEDABAD, GUJARAT
Posted:
15 December 2025
Closed:
25 December 2025
GEM
Truck Mounted Suction Cum Jetting Machine
Urban Development And Housing Department
MADHEPURA, BIHAR
Posted:
22 July 2025
Closed:
1 August 2025
GEM
Truck Mounted Suction Cum Jetting Machine
N/a
KANPUR NAGAR, UTTAR PRADESH
Posted:
8 May 2025
Closed:
3 June 2025
GEM
Truck Mounted Suction Cum Jetting Machine
Na
NORTH 24 PARGANAS, WEST BENGAL
Posted:
7 April 2025
Closed:
6 May 2025
GEM
Tender Results
Loading results...
Technical Specifications
1 Item
Item #1 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| Certification Parameters | Conforming to IS:13496 (General Requirements of Suction Machine for Cleaning Sewers, Manholes & Ancillary Structures Provided on Sewer Line & Closed Storm Water Drains) and IS:11387 (Requirements for high pressure jetting machine for sewer cleaning) | Yes, NA Or higher |
| Certification Parameters | Agreed to furnish all the test reports and certificates to buyer/consignee on demand | Yes |
| Suction Parameters | Vacuum Pump/Blower Air Flow Capacity (In m³/hr) | 318.0 - 6500.0 Or higher |
| Suction Parameters | Suction Depth Capacity (In Meter) | <8, >=8 Or higher |
| Suction Parameters | Suction Depth Capacity (Exact Value) (In Meter) | 8.0 - 12.0 Or higher |
| Suction Parameters | Total Length of Suction Hose (In Meter) | 9 - 30 |
| Suction Parameters | Suction Hose Internal Diameter (mm) | <100, >=100 Or higher |
| Suction Parameters | Suction Hose Internal Diameter (Exact Value) (mm) | 75.0 - 210.0 Or higher |
| Jetting Parameters | Type of Jetting pump | High-Pressure Plunger pump Or higher |
| Jetting Parameters | Maximum Working Pressure of Jetting Pump (bar) | 110.0 - 500.0 Or higher |
| Jetting Parameters | Water Flow Rate of Jetting Pump (LPM) | <200, >=200 Or higher |
| Jetting Parameters | Water Flow Rate of Jetting Pump (Exact Value) (LPM) | 130.0 - 500.0 Or higher |
| Jetting Parameters | Jetting Hose Length (Meter) | <100, >=100 Or higher |
| Jetting Parameters | Jetting Hose Length (Exact Value) (Meter) | 60.0 - 180.0 Or higher |
| Jetting Parameters | Jetting Hose Inner Diameter (mm) | <25, >=25 Or higher |
| Jetting Parameters | Jetting Hose Reel Drive Type | Hydraulic operated Or higher |
| Jetting Parameters | Number of Jetting nozzle provided | 2, 3 Or higher |
| Tank Parameters | Sludge Tank Capacity (In Liter) | 1000.0 - 6000.0 Or higher |
| Tank Parameters | Fresh Water Tank Capacity (In Liter) | 2000.0 - 8000.0 Or higher |
| Tank Parameters | Tank material sheet thickness | 5.0 |
| Tank Parameters | Tank Tipping Arrangement | Yes |
| Tank Parameters | Discharge Pipe Diameter | <100, >=100 Or higher |
| Tank Parameters | Corrosion resistance paint finish for inner and outer part of tank | Yes |
| Base Vehicle Parameters | Chassis Maximum Gross Vehicle Weight (Kerb weight + Payload) | 6250.0 - 40000.0 Or higher |
| Base Vehicle Parameters | Type of Fuel | Diesel |
| Base Vehicle Parameters | Axle Configuration | 4 X 2 |
| Base Vehicle Parameters | Maximum Engine Output / Power (kW) at rated RPM | 100.0 - 400.0 Or higher |
| Base Vehicle Parameters | Vehicle Emission Compliance | BS VI |
| Base Vehicle Parameters | Vehicle Air Intake System | Turbocharged Intercooled Or higher |
| Base Vehicle Parameters | Type of Steering | Power Steering Or higher |
| Base Vehicle Parameters | Air Conditioning in Driver Cabin | Yes, No |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
GST registration certificate
2
Permanent Account Number (PAN) card
3
Audited financial statements (last 3 years) or CA/Cost Accountant certificate for turnover
4
Test reports and certificates as per IS:13496 and IS:11387
5
OEM authorization letter (if bidding on behalf of OEM)
6
Experience certificates for similar suction-jetting machinery projects
7
Bid security/EMD proof (₹90,000)
8
Product technical compliance certificates and installation manuals
Frequently Asked Questions
Key insights about ASSAM tender market
How to bid for Barpeta suction jetting machine tender in Assam 2026
Bidders must submit GST, PAN, turnover evidence, EMD ₹90,000, and OEM authorizations with the technical bid. Ensure IS:13496 and IS:11387 compliance, attach test reports, and provide three years of audited financials or CA certificates. Delivery terms follow the option clause with up to 25% quantity variation.
What documents are required for the Truck Mounted Suction Cum Jetting tender in Barpeta
Required documents include GST registration, PAN, audited financial statements for last 3 years, EMD proof of ₹90,000, IS conformity certificates, OEM authorization, and prior project experience certificates for sewer cleaning equipment. Technical bid must include all test reports on demand.
What standards govern the Barpeta suction machine bid in Assam
Bidders must comply with IS:13496 for suction machines and IS:11387 for high-pressure jetting. Provide all corresponding test reports and certificates; ensure equipment is tested to these standards and documented in the bid submission.
When is the delivery window for the Barpeta suction-jetting equipment
Delivery timing is tied to the last date of the original delivery order; with option clause, extended time is calculated as (additional quantity/original quantity) × original period, minimum 30 days; ensure adherence to this schedule.
What is the EMD amount for the Barpeta tender and how to submit
EMD is ₹90,000. Submit via Demand Draft in favour of Chairman, Barpeta Municipal Board or provide online payment proof; include scanned copy of DD with bid submission as proof.
What are the OEM turnover requirements for this Barpeta bid
OEM must meet the minimum average annual turnover over last 3 years as specified in the bid document; for bunch bids, the OEM of the primary product with the highest bid value must satisfy turnover criteria with audited statements or CA certificates.
What are the jetting and suction parameter details bidders must disclose
Disclose vacuum capacity (m³/hr), suction depth (m), total suction hose length (m), hose inner diameter (mm), jetting pump type, max jetting pressure (bar), water flow rate (LPM), hose length and diameter, nozzle count, and tank capacities (sludge/fresh water) with exact values.
Similar Tenders
5 found
Truck Mounted Suction Cum Jetting Machine
Barpeta Municipal Board
EMD: ₹20,000
⏰ Deadline: 3 weeks left
🛒 Type: Goods
View
GEM
Urgent
Truck Mounted Jetting Machine
E-municipalities - Eservices To Citizens And Employees Of Urban Local Bodies Of Uttar Pradesh
📍 PRATAPGARH, UTTAR PRADESH
EMD: ₹52,500
Est: ₹10.5 L
⏰ Deadline: 1 day left
🛒 Type: Goods
View
GEM
Truck Mounted Jetting Machine
Urban Development Directorate
📍 ALMORA, UTTARAKHAND
EMD: ₹48,000
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Trailer Mounted Suction Cum Jetting Machine
N/a
EMD: ₹50,000
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View
GEM
Urgent
Urban Development Department Uttar Pradesh Barabanki Trailer Mounted Suction Cum Jetting Machine Tender IS13496 IS11387 2026
N/a
📍 Barabanki, UTTAR PRADESH
EMD: ₹13,000
⏰ Deadline: 5 days left
🛒 Type: Goods
View
GEM
Explore More Opportunities
Quick Access
Categories 2 available
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 3
GeM-Bidding-9392187.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS