Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112-1989 Make-Birla Gold,Amb
Indian Army
TAWANG, ARUNACHAL PRADESH
Progress
RAQuantity
3388
Bid Type
Two Packet Bid
A tender has been published for Indian Army Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia, Stone boulder 9inch to 12inch, Coarse Aggregate 40 to 63mm, Coarse sand free from vegetation, Coarse Aggregate 20mm graded. , Coarse Aggregate 40mm graded, Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol, PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll, Cement based paint Snowcem Make Berger or Asian or Nerolac, Synthetic paint enamelled OG conforming to IS 5 Ur 2004 Make Asian or Berqer or Nerolac, Synthetic Paint enamelled Brown confirming to IS 5 2004 Make Berger or Asian or Nerolac, Anti corrosive Red Oxide zinc chromate primer conforming to IS 5 2004 Make Asian or Berger or Nerolac, Loop Holes 1000 x 300 mm Make Tata or Sail or JSW, Ventilator Steel 300 x 450 mm will be fabricated using ISA 35 x 35 x 5mm for outer frame and ISA 30 x 30x 3mm for shutter frame with blace sheet as per TS, MS Binding Wire, ISMB hot rolled MS 125 4000 mm long Make Tata or Sail or JSW, ISMS hot rolled MS 125 1200 mm long Make Tata or Sail or JSW, SRT 1840 x 613x 180 mm 2 mm thick MS Sheet Hot rolled steel with nuts bolt incl one coat of Red Oxide Make Tata or Sail or JSW, Prefeb mild steel door of size 900x 1700mm outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner as per TS, HDPE sand Bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per Bag, Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part ll 1982 Make Tata or Sail or JSW, Prefeb folding double sleeping bunks madeof MS columns 65x 65x6mm and ms plate form made of ISA 40x40x6mm hold fast 65x65x6mm 230mm long 12mm as per TS, Polythene sheet colour less and weight of sheet shall be not less than 70gm or Sqm, Wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 X 0 point 026m, Wooden Scantling various sizes, Nails various size, Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side, Air termination single pointed aluminium rod 12mm dia and 300mm long, GI pipe 20 mm dia light grade Make Jindal or Tata or Kalinga, GI pipe 40 mm dia light grade Make Jindal or Tata or Kalinga, Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex, Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw, Aluminium strips 25x3mm, Nut and bolts 6 mm dia 30mm long with check nut and washer, Charcoal, Salt normal, CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame, Funnel fitted with 20 mm diameter GI Pipe 1 point 5 m Long Pipe Make Jindal or Tata or Kalinga, Galvanised iron strip 32x6mm in SONITPUR, ASSAM. Quantity: 3388 by. Submission Deadline: 10-04-2025 19: 00: 00. Check eligibility and apply.
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS
Indian Army
TAWANG, ARUNACHAL PRADESH
Indian Army
TAWANG, ARUNACHAL PRADESH
Indian Army
TAWANG, ARUNACHAL PRADESH
Indian Army
SONITPUR, ASSAM
Indian Army
SONITPUR, ASSAM
Tender Results
Loading results...
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia | Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia | 833 | bags | epo2engr | 45 |
| 2 | Stone boulder 9inch to 12inch | Stone boulder 9inch to 12inch | 196 | cum | epo2engr | 45 |
| 3 | Coarse Aggregate 40 to 63mm | Coarse Aggregate 40 to 63mm | 21 | cum | epo2engr | 45 |
| 4 | Coarse sand free from vegetation | Coarse sand free from vegetation | 98 | cum | epo2engr | 45 |
| 5 | Coarse Aggregate 20mm graded . | Coarse Aggregate 20mm graded . | 35 | cum | epo2engr | 45 |
| 6 | Coarse Aggregate 40mm graded | Coarse Aggregate 40mm graded | 35 | cum | epo2engr | 45 |
| 7 | Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol | Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol | 35 | kgs | epo2engr | 45 |
| 8 | PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll | PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll | 14 | roll | epo2engr | 45 |
| 9 | Cement based paint Snowcem Make Berger or Asian or Nerolac | Cement based paint Snowcem Make Berger or Asian or Nerolac | 70 | kgs | epo2engr | 45 |
| 10 | Synthetic paint enamelled OG conforming to IS 5 Ur 2004 Make Asian or Berqer or Nerolac | Synthetic paint enamelled OG conforming to IS 5 Ur 2004 Make Asian or Berqer or Nerolac | 42 | ltr | epo2engr | 45 |
| 11 | Synthetic Paint enamelled Brown confirming to IS 5 2004 Make Berger or Asian or Nerolac | Synthetic Paint enamelled Brown confirming to IS 5 2004 Make Berger or Asian or Nerolac | 35 | ltr | epo2engr | 45 |
| 12 | Anti corrosive Red Oxide zinc chromate primer conforming to IS 5 2004 Make Asian or Berger or Nerolac | Anti corrosive Red Oxide zinc chromate primer conforming to IS 5 2004 Make Asian or Berger or Nerolac | 42 | ltr | epo2engr | 45 |
| 13 | Loop Holes 1000 x 300 mm Make Tata or Sail or JSW | Loop Holes 1000 x 300 mm Make Tata or Sail or JSW | 21 | nos | epo2engr | 45 |
| 14 | Ventilator Steel 300 x 450 mm will be fabricated using ISA 35 x 35 x 5mm for outer frame and ISA 30 x 30x 3mm for shutter frame with blace sheet as per TS | Ventilator Steel 300 x 450 mm will be fabricated using ISA 35 x 35 x 5mm for outer frame and ISA 30 x 30x 3mm for shutter frame with blace sheet of 1 point 0mm thick hold fast ISA 35 x 35 x6 mm and tower bolt 8 mm dia 75 mm long Make TATA or SAIL or JSW | 28 | nos | epo2engr | 45 |
| 15 | MS Binding Wire | MS Binding Wire | 7 | kgs | epo2engr | 45 |
| 16 | ISMB hot rolled MS 125 4000 mm long Make Tata or Sail or JSW | ISMB hot rolled MS 125 4000 mm long Make Tata or Sail or JSW | 21 | nos | epo2engr | 45 |
| 17 | ISMS hot rolled MS 125 1200 mm long Make Tata or Sail or JSW | ISMS hot rolled MS 125 1200 mm long Make Tata or Sail or JSW | 21 | nos | epo2engr | 45 |
| 18 | SRT 1840 x 613x 180 mm 2 mm thick MS Sheet Hot rolled steel with nuts bolt incl one coat of Red Oxide Make Tata or Sail or JSW | SRT 1840 x 613x 180 mm 2 mm thick MS Sheet Hot rolled steel with nuts bolt incl one coat of Red Oxide Make Tata or Sail or JSW | 210 | nos | epo2engr | 45 |
| 19 | Prefeb mild steel door of size 900x 1700mm outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner as per TS | Prefeb mild steel door of size 900x 1700mm outer frame made out of ISA 40x 40x6mm and door shutter frame of ISA 35x35x5mm and all stiffner ISA 30x30x3mm as per drg Steel shall conform to IS 800 I Make Tata or Sail or JSW | 7 | nos | epo2engr | 45 |
| 20 | HDPE sand Bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per Bag | HDPE sand Bags khaki colour of size 30 inchx15inch inside laminated interlocking stiched weight of the each bag should not be less then 42 45 gms per Bag | 420 | nos | epo2engr | 45 |
| 21 | Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part ll 1982 Make Tata or Sail or JSW | Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 Part ll 1982 Make Tata or Sail or JSW | 364 | kgs | epo2engr | 45 |
| 22 | Prefeb folding double sleeping bunks madeof MS columns 65x 65x6mm and ms plate form made of ISA 40x40x6mm hold fast 65x65x6mm 230mm long 12mm as per TS | Prefeb folding double sleeping bunks madeof MS columns 65x 65x6mm and ms plate form made of ISA 40x40x6mm hold fast 65x65x6mm 230mm long 12mm BWR Ply will be fitted on ISA frame work as per drawing Make Tata or Sail or JSW | 14 | nos | epo2engr | 45 |
| 23 | Polythene sheet colour less and weight of sheet shall be not less than 70gm or Sqm | Polythene sheet colour less and weight of sheet shall be not less than 70gm or Sqm | 140 | sqm | epo2engr | 45 |
| 24 | Wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 X 0 point 026m | Wooden planks for shuttering llnd class wood of size 3 point 0 x 0 point 30 X 0 point 026m | 14 | nos | epo2engr | 45 |
| 25 | Wooden Scantling various sizes | Wooden Scantling various sizes | 28 | cft | epo2engr | 45 |
| 26 | Nails various size | Nails various size | 14 | kgs | epo2engr | 45 |
| 27 | Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side | Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side | 7 | nos | epo2engr | 45 |
| 28 | Air termination single pointed aluminium rod 12mm dia and 300mm long | Air termination single pointed aluminium rod 12mm dia and 300mm long | 7 | nos | epo2engr | 45 |
| 29 | GI pipe 20 mm dia light grade Make Jindal or Tata or Kalinga | GI pipe 20 mm dia light grade Make Jindal or Tata or Kalinga | 21 | rm | epo2engr | 45 |
| 30 | GI pipe 40 mm dia light grade Make Jindal or Tata or Kalinga | GI pipe 40 mm dia light grade Make Jindal or Tata or Kalinga | 14 | rm | epo2engr | 45 |
| 31 | Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex | Insulating PVC block 75x75x30 mm with insulating clamp nut and bolt Make Presto or Polycab or Finolex | 70 | nos | epo2engr | 45 |
| 32 | Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw | Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw | 7 | set | epo2engr | 45 |
| 33 | Aluminium strips 25x3mm | Aluminium strips 25x3mm | 35 | rm | epo2engr | 45 |
| 34 | Nut and bolts 6 mm dia 30mm long with check nut and washer | Nut and bolts 6 mm dia 30mm long with check nut and washer | 56 | nos | epo2engr | 45 |
| 35 | Charcoal | Charcoal | 175 | kgs | epo2engr | 45 |
| 36 | Salt normal | Salt normal | 175 | kgs | epo2engr | 45 |
| 37 | CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame | CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame | 7 | nos | epo2engr | 45 |
| 38 | Funnel fitted with 20 mm diameter GI Pipe 1 point 5 m Long Pipe Make Jindal or Tata or Kalinga | Funnel fitted with 20 mm diameter GI Pipe 1 point 5 m Long Pipe Make Jindal or Tata or Kalinga | 7 | nos | epo2engr | 45 |
| 39 | Galvanised iron strip 32x6mm | Galvanised iron strip 32x6mm | 42 | rm | epo2engr | 45 |
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Start
15-Apr-2025, 3:00 pm
End
16-Apr-2025, 3:00 pm
Duration: 24 hours
Reverse Auction Document
✅ RA concluded. Check financial results for final rankings.
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | M/S D.K ENTERPRISES Under PMA | - | 09-04-2025 19:06:13 | Qualified |
| 2 | M/S PHUNTSOK ENTERPRISES Under PMA | - | 09-04-2025 17:16:26 | Qualified |
| 3 | M/S YESHI TSERING ENTERPRISES Under PMA | - | 09-04-2025 13:24:08 | Qualified |
| 4 | PARBIN SIDDIKI Under PMA | - | 09-04-2025 18:15:42 | Qualified |
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | M/S YESHI TSERING ENTERPRISES(MSE,MII)( MSE Social Category:ST ) Under PMA | ₹39,48,777 | Item Categories : Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or |
| L2 | M/S PHUNTSOK ENTERPRISES (MSE,MII)( MSE Social Category:ST ) Under PMA | ₹40,06,170 | Item Categories : Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or |
| L3 | PARBIN SIDDIKI (MSE,MII)( MSE Social Category:OBC ) Under PMA | ₹42,97,020 | Item Categories : Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or |
| L4 | M/S D.K ENTERPRISES (MSE,MII)( MSE Social Category:ST ) Under PMA | ₹44,12,457 | Item Categories : Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or |
Key insights about ASSAM tender market
The eligibility requirements include being a registered entity with a valid operational license. Suppliers must demonstrate a proven track record in providing similar products for government projects and comply with local regulations. Proper registration with governmental procurement platforms is essential.
The technical specifications include compliance with IS standards. For instance, Cement OPC 43 Grade must meet IS 8112:1989 standards. Other materials like coarse aggregates and waterproofing compounds need to align with specific IS standards for quality assurance.
The Earnest Money Deposit (EMD) is required to ensure that bidders are serious about their submission. This deposit acts as a security for the contract and is subject to refund upon conclusion of the evaluation process unless the bidder withdraws their offer.
Suppliers must follow the designated submission methods outlined in the tender documentation. Documentation should be submitted through the online portal ensuring that all documents adhere to the accepted formats and include all necessary certifications.
The tender has provisions that favor Micro, Small, and Medium Enterprises (MSEs) and startups. These may include relaxation of certain eligibility criteria, access to financial assistance, and preference in tender evaluation to promote local manufacturing and economic growth.
Sign up now to access all documents
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS