Progress
Quantity
5
Bid Type
Two Packet Bid
N/a invites bids for Hydraulic Trainer Kit, Hydraulic Workstation with 40 square mm aluminum profile legs, Cut section models for hydraulic components, Cut section models, models for hydraulic components in DIU, DAMAN & DIU. Quantity: 5. Submission Deadline: 20-03-2025 14: 00: 00. Submit your proposal before the deadline.
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Hydraulic Trainer Kit , Hydraulic Workstation with 40 square mm aluminum profile legs , Cut section models for hydraulic components , Cut section models , models for hydraulic components
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS
Hydraulic Trainer Kit
1. Hydraulic Power pack 1 no, with i. external gear pump having a delivery rate of 2.5 lpm, approx. 1400 rpm operating pressure 60 bar, coupled to a single phase AC motor having start capacitor and switch and overload protection, ii. pressure relief valve iii. oil reservoir 2. Pressure relief valve 1 no 3. Drip tray, steel 1 no, 4. Pressure Gauge 1 no, 5. Four Way distributor 1 no, 6. Double acting hydraulic cylinder 1 no, 7. Suitable Weight, 1 no, for vertical loading of hydraulic cylinder 8. Mounting kit for weight 1 no, for realizing pulling and pushing load. 9. 3 by 2 way directional control valve 1 no, with hand lever actuation. 10. 4 by 2 way directional control valve 1 no, with hand lever actuation. 11. 4 by 3 way directional control valve 1 no, closed centre position, with hand lever actuation. 12. Non return valve 1 no 13. Pilot operated check valve 1 no, Pilot to open. 14. One way flow control valve 1 no, 15. T Connector with self sealing coupling nipples, 2 Nos., 1 No 16. Profile plate, 1 set, Anodised Aluminum, 1, with carriers, mounting frames onto the Hydraulic workstation
Hydraulic Workstation with 40 square mm aluminum profile legs
1. Worktable Size Approx. L1200mm X W900mm X H900mm, with four castor wheels including two lockable wheels at the front side, 2. Drawer Size Approx. L460mm x W495mm x H158mm each, and overall size of Drawer unit Approx. L470mm x W495mm x H825mm and 3. Drawer slide height Approx. 85mm.
Cut section models for hydraulic components
Cut section models for hydraulic components
Cut section models
Cut section models for hydraulic components
models for hydraulic components
Cut section models for hydraulic components
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Hydraulic Trainer Kit | 1. Hydraulic Power pack 1 no, with i. external gear pump having a delivery rate of 2.5 lpm, approx. 1400 rpm operating pressure 60 bar, coupled to a single phase AC motor having start capacitor and switch and overload protection, ii. pressure relief valve iii. oil reservoir 2. Pressure relief valve 1 no 3. Drip tray, steel 1 no, 4. Pressure Gauge 1 no, 5. Four Way distributor 1 no, 6. Double acting hydraulic cylinder 1 no, 7. Suitable Weight, 1 no, for vertical loading of hydraulic cylinder 8. Mounting kit for weight 1 no, for realizing pulling and pushing load. 9. 3 by 2 way directional control valve 1 no, with hand lever actuation. 10. 4 by 2 way directional control valve 1 no, with hand lever actuation. 11. 4 by 3 way directional control valve 1 no, closed centre position, with hand lever actuation. 12. Non return valve 1 no 13. Pilot operated check valve 1 no, Pilot to open. 14. One way flow control valve 1 no, 15. T Connector with self sealing coupling nipples, 2 Nos., 1 No 16. Profile plate, 1 set, Anodised Aluminum, 1, with carriers, mounting frames onto the Hydraulic workstation | 1 | set | sandip.baria | 15 | |
| 2 | Hydraulic Workstation with 40 square mm aluminum profile legs | 1. Worktable Size Approx. L1200mm X W900mm X H900mm, with four castor wheels including two lockable wheels at the front side, 2. Drawer Size Approx. L460mm x W495mm x H158mm each, and overall size of Drawer unit Approx. L470mm x W495mm x H825mm and 3. Drawer slide height Approx. 85mm. | 1 | no | sandip.baria | 15 | |
| 3 | Cut section models for hydraulic components | Cut section models for hydraulic components | 1 | set | sandip.baria | 15 | |
| 4 | Cut section models | Cut section models for hydraulic components | 1 | set | sandip.baria | 15 | |
| 5 | models for hydraulic components | Cut section models for hydraulic components | 1 | set | sandip.baria | 15 |
Discover companies most likely to bid on this tender
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Additional Doc 3 (Requested in ATC)
Additional Doc 4 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Key insights about DAMAN & DIU tender market
The eligibility requirements include being a registered business entity in accordance with government regulations, providing valid identification and operational licenses. Bidders should have experience in manufacturing or supplying educational tools or equipment in the engineering education sector. Additionally, adherence to relevant industry standards and quality specifications is mandatory.
Bidders are required to submit several important certificates including business registration, quality assurance certifications, and any sector-specific certifications that demonstrate compliance with safety and educational standards. These documents ensure that the equipment meets academic and safety benchmarks essential for training purposes.
The registration process involves completing the application on the designated tendering platform and submitting all required documents online. Bidder registration typically necessitates creating an account, uploading necessary credentials, and ensuring compliance with the eligibility criteria established by the issuing authority. Be attentive to the specific submission formats outlined in the tender documents.
Payment terms will generally be detailed in the contract upon award. Typically, successful bidders may expect an advance payment followed by milestone payments contingent on delivery and inspection of the hydraulic trainer kits. Final payments may also be aligned with satisfactory completion of all deliverables as defined in the contract's terms.
Yes, suppliers must adhere to prevailing quality standards that govern the production and supply of educational training equipment. The testing criteria may include performance tests, safety evaluations, and compliance checks against national standards to guarantee that all hydraulic trainer kits function optimally and securely under educational settings.
Through these comprehensive FAQs, potential bidders are provided clarity regarding eligibility, documentation, and requirements essential for participating effectively in the procurement process of hydraulic trainer kits.
Indian Army
📍 TAWANG, ARUNACHAL PRADESH
Indian Army
Indian Army
Indian Army
📍 JAMMU, JAMMU & KASHMIR
Indian Army
📍 BATHINDA, PUNJAB
Sign up now to access all documents
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS