Open Tender for Qick setting compound Rapidite,M sand confirming to IS 383 2016,Aggregate 20mm stone aggregate to b in BARAMULLA, JAMMU & KASHMIR
Bid Publish Date
17-Sep-2026, 2:26 pm
Bid End Date
28-Sep-2026, 3:00 pm
EMD
₹82,814
Value
₹16,56,290
Location
Progress
RAIndian Army announces a tender for Qick setting compound Rapidite, M sand confirming to IS 383 2016, Aggregate 20mm stone aggregate to be crushed rock, Aggregate 40mm, Aggregate 63mm, Load bearing concrete PCC Soild Blocks, Mild Steel TMT bars 16 mm dia, Mild Steel TMT bars 10 mm dia, Mild Steel TMT bars 08 mm dia, MS binding wire not less than 0. 9mm dia, Forming 25 mm width expansion joint in concrete slab, Construction joints 25 mm deep and 10 mm wide, Contraction joint with an initial saw cut of 3 mm, Road marking paints as in painting lines dashes arrows letters, HDPE sheet of 400 Micron thick, Synthetic Enamel paint, Thinner, Cement base Paint, Wooden form work, Wooden form work for end bay panels size 3 x 0. 10m, Lightweight extruded aluminum alloy straight edge, wooden Flat Gurmala, Water leveling pipe PVC 100 mtr, 18 inch 400mm diameter mortar pan, Shovel Square, Hammer, Tape measuring metallic 30m, Mason trowel, Heavy duty Pickaxes with Chisel and Point ends head weight of 3kg seasoned hardwood handle, Single piece hot forged carbon steel Powrah, Heavy duty Crow Bar 5 feet length, Aluminium Spirit level 12 inch, Hand Gloves conforming in BARAMULLA, JAMMU & KASHMIR. Quantity: 6088. Submission Deadline: 28-09-2026 15: 00: 00. Last date to apply is approaching fast!
Reverse Auction Schedule
Start
13-Oct-2026, 2:00 pm
End
14-Oct-2026, 2:00 pm
Duration: 24 hours
Reverse Auction Document
✅ RA concluded. Check financial results for final rankings.
Tender Data
Bid Details
Quantity
6088
Category
M sand confirming to IS 383 2016
Bid Type
Two Packet Bid
Bid Validity
140 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
50% Lowest Priced Technically Qualified Bidders
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
8
OEM Avg. Turnover
8
Past Performance
70 %
Warranty Period
3 years
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Qick setting compound Rapidite , M sand confirming to IS 383 2016 , Aggregate 20mm stone aggregate to be crushed rock , Aggregate 40mm , Aggregate 63mm , Load bearing concrete PCC Soild Blocks , Mild Steel TMT bars 16 mm dia , Mild Steel TMT bars 10 mm dia , Mild Steel TMT bars 08 mm dia , MS binding wire not less than 0.9mm dia , Forming 25 mm width expansion joint in concrete slab , Construction joints 25 mm deep and 10 mm wide , Contraction joint with an initial saw cut of 3 mm , Road marking paints as in painting lines dashes arrows letters , HDPE sheet of 400 Micron thick , Synthetic Enamel paint , Thinner , Cement base Paint , Wooden form work , Wooden form work for end bay panels size 3 x 0.10m , Lightweight extruded aluminum alloy straight edge , wooden Flat Gurmala , Water leveling pipe PVC 100 mtr , 18 inch 400mm diameter mortar pan , Shovel Square , Hammer , Tape measuring metallic 30m , Mason trowel , Heavy duty Pickaxes with Chisel and Point ends head weight of 3kg seasoned hardwood handle , Single piece hot forged carbon steel Powrah , Heavy duty Crow Bar 5 feet length , Aluminium Spirit level 12 inch , Hand Gloves conforming
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
14
Delivery Details
Max Delivery Days
60
Delivery Locations
1
Delivery Cities
Baramulla
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | Baramulla | Baramulla | - | - | 1813 | 60 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9906759.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
33 Items Sign in to view GEM price trends Sign in for GEM prices
Qick setting compound Rapidite
Qick setting compound Rapidite
M sand confirming to IS 383 2016
M sand confirming to IS 383 2016 Specifications for coarse and fine aggregates
Aggregate 20mm stone aggregate to be crushed rock
Aggregate 20mm stone aggregate to be crushed rock
Aggregate 40mm
Aggregate 40mm
Aggregate 63mm
Aggregate 63mm
Load bearing concrete PCC Soild Blocks
Load bearing concrete PCC Soild Blocks
Mild Steel TMT bars 16 mm dia
Mild Steel TMT bars 16 mm dia
Mild Steel TMT bars 10 mm dia
Mild Steel TMT bars 10 mm dia
Mild Steel TMT bars 08 mm dia
Mild Steel TMT bars 08 mm dia
MS binding wire not less than 0.9mm dia
MS binding wire not less than 0.9mm dia
Forming 25 mm width expansion joint in concrete slab
Forming 25 mm width expansion joint in concrete slab
Construction joints 25 mm deep and 10 mm wide
Construction joints 25 mm deep and 10 mm wide
Contraction joint with an initial saw cut of 3 mm
Contraction joint with an initial saw cut of 3 mm
Road marking paints as in painting lines dashes arrows letters
Road marking paints as in painting lines dashes arrows letters
HDPE sheet of 400 Micron thick
HDPE sheet of 400 Micron thick water proof wrinkle free without puncture having minimum weight 390 gm
Synthetic Enamel paint
Synthetic Enamel paint
Thinner
Thinner
Cement base Paint
Cement base Paint
Wooden form work
Wooden form work
Wooden form work for end bay panels size 3 x 0.10m
Wooden form work for end bay panels size 3 x 0.10m
Lightweight extruded aluminum alloy straight edge
Lightweight extruded aluminum alloy straight edge
wooden Flat Gurmala
wooden Flat Gurmala
Water leveling pipe PVC 100 mtr
Water leveling pipe PVC 100 mtr
18 inch 400mm diameter mortar pan
18 inch 400mm diameter mortar pan
Shovel Square
Shovel Square 14 Gauge Blade size 310 x 245 mm shaft size 710 mm fitted with strong Steel crutched hard wooden handles
Hammer
Hammer with wooden handle 5 Kg
Tape measuring metallic 30m
Tape measuring metallic 30m
Mason trowel
Mason trowel
Heavy duty Pickaxes with Chisel and Point ends head weight of 3kg seasoned hardwood handle
Heavy duty Pickaxes with Chisel and Point ends head weight of 3kg seasoned hardwood handle
Single piece hot forged carbon steel Powrah
Single piece hot forged carbon steel Powrah with handle hardwood weight of 2 kg
Heavy duty Crow Bar 5 feet length
Heavy duty Crow Bar 5 feet length
Aluminium Spirit level 12 inch
Aluminium Spirit level 12 inch
Hand Gloves conforming
Hand Gloves conforming insulated with rubber
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Qick setting compound Rapidite | Qick setting compound Rapidite | 1,813 | ltr | amit@14 | 60 | |
| 2 | M sand confirming to IS 383 2016 | M sand confirming to IS 383 2016 Specifications for coarse and fine aggregates | 132 | cum | amit@14 | 60 | |
| 3 | Aggregate 20mm stone aggregate to be crushed rock | Aggregate 20mm stone aggregate to be crushed rock | 103 | cum | amit@14 | 60 | |
| 4 | Aggregate 40mm | Aggregate 40mm | 150 | cum | amit@14 | 60 | |
| 5 | Aggregate 63mm | Aggregate 63mm | 100 | cum | amit@14 | 60 | |
| 6 | Load bearing concrete PCC Soild Blocks | Load bearing concrete PCC Soild Blocks | 1,260 | nos | amit@14 | 60 | |
| 7 | Mild Steel TMT bars 16 mm dia | Mild Steel TMT bars 16 mm dia | 474 | kg | amit@14 | 60 | |
| 8 | Mild Steel TMT bars 10 mm dia | Mild Steel TMT bars 10 mm dia | 100 | kg | amit@14 | 60 | |
| 9 | Mild Steel TMT bars 08 mm dia | Mild Steel TMT bars 08 mm dia | 657 | kg | amit@14 | 60 | |
| 10 | MS binding wire not less than 0.9mm dia | MS binding wire not less than 0.9mm dia | 7 | kg | amit@14 | 60 | |
| 11 | Forming 25 mm width expansion joint in concrete slab | Forming 25 mm width expansion joint in concrete slab | 12 | 10 rm | amit@14 | 60 | |
| 12 | Construction joints 25 mm deep and 10 mm wide | Construction joints 25 mm deep and 10 mm wide | 27 | 10 rm | amit@14 | 60 | |
| 13 | Contraction joint with an initial saw cut of 3 mm | Contraction joint with an initial saw cut of 3 mm | 27 | 10 rm | amit@14 | 60 | |
| 14 | Road marking paints as in painting lines dashes arrows letters | Road marking paints as in painting lines dashes arrows letters | 32 | sqm | amit@14 | 60 | |
| 15 | HDPE sheet of 400 Micron thick | HDPE sheet of 400 Micron thick water proof wrinkle free without puncture having minimum weight 390 gm | 900 | sqm | amit@14 | 60 | |
| 16 | Synthetic Enamel paint | Synthetic Enamel paint | 2 | ltr | amit@14 | 60 | |
| 17 | Thinner | Thinner | 1 | ltrs | amit@14 | 60 | |
| 18 | Cement base Paint | Cement base Paint | 2 | kg | amit@14 | 60 | |
| 19 | Wooden form work | Wooden form work | 50 | sqm | amit@14 | 60 | |
| 20 | Wooden form work for end bay panels size 3 x 0.10m | Wooden form work for end bay panels size 3 x 0.10m | 170 | nos | amit@14 | 60 | |
| 21 | Lightweight extruded aluminum alloy straight edge | Lightweight extruded aluminum alloy straight edge | 2 | nos | amit@14 | 60 | |
| 22 | wooden Flat Gurmala | wooden Flat Gurmala | 2 | nos | amit@14 | 60 | |
| 23 | Water leveling pipe PVC 100 mtr | Water leveling pipe PVC 100 mtr | 1 | nos | amit@14 | 60 | |
| 24 | 18 inch 400mm diameter mortar pan | 18 inch 400mm diameter mortar pan | 10 | nos | amit@14 | 60 | |
| 25 | Shovel Square | Shovel Square 14 Gauge Blade size 310 x 245 mm shaft size 710 mm fitted with strong Steel crutched hard wooden handles | 10 | nos | amit@14 | 60 | |
| 26 | Hammer | Hammer with wooden handle 5 Kg | 3 | nos | amit@14 | 60 | |
| 27 | Tape measuring metallic 30m | Tape measuring metallic 30m | 2 | nos | amit@14 | 60 | |
| 28 | Mason trowel | Mason trowel | 8 | nos | amit@14 | 60 | |
| 29 | Heavy duty Pickaxes with Chisel and Point ends head weight of 3kg seasoned hardwood handle | Heavy duty Pickaxes with Chisel and Point ends head weight of 3kg seasoned hardwood handle | 4 | nos | amit@14 | 60 | |
| 30 | Single piece hot forged carbon steel Powrah | Single piece hot forged carbon steel Powrah with handle hardwood weight of 2 kg | 8 | nos | amit@14 | 60 | |
| 31 | Heavy duty Crow Bar 5 feet length | Heavy duty Crow Bar 5 feet length | 2 | nos | amit@14 | 60 | |
| 32 | Aluminium Spirit level 12 inch | Aluminium Spirit level 12 inch | 2 | nos | amit@14 | 60 | |
| 33 | Hand Gloves conforming | Hand Gloves conforming insulated with rubber | 15 | pairs | amit@14 | 60 |
Categories
43
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer