Procurement Opportunity: Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in NASHIK, MAHARASHTRA
Bid Publish Date
10-Sep-2026, 12:47 pm
Bid End Date
21-Sep-2026, 1:00 pm
EMD
₹55,000
Value
₹18,31,537
Location
Progress
A tender has been published for Indian Army Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Hydraulically Regulated Door Closers ISI Marked to 3564 (Q3), ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996, ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996, ALDROP BOLT SS 250MM ROUND NUCKLE ROD DIA 12MM 202 GRADE, ALDROP BOLT SS 300MM ROUND NUCKLE ROD DIA 12MM 202 GRADE, BOW HANDLE SS 100MM, ELECT FAN REGULATOR 100 WATT MINI, ELECT SOCKET 16 AMP, MODULAR, FEVICOL SH, FLUSHING CISTERN KIT, GI CHECK NUT 32MM ISI, HANDLE CP FOR STEEL ALMIRAH 15MM WIDE 130MM LONG, HANDLE MS FOR WINDOW LEFT AND RIGHT 300MM LONG, HASP AND STAPLE ALUM 20MM WIDE 75MM LONG, HASP AND STAPLE ALUM 30MM WIDE 100MM LONG, HIGH PRESSURE HDPE FLOAT VALVE 15MM, HIGH PRESSURE HDPE FLOAT VALVE 20MM, KNOB FOR CUPBOARD WITH SCREW DIA 30MM, ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD, PRELAMINATED PARTICLE BOARD 8FTX4FTX12MM BSL, PRELAMINATED PARTICLE BOARD 8FTX4FTX19MM BSL, PVC SEAT AND BACK FOR CHAIR VERANDAH, PVC SEAT CHAIR DINING, PVC SHOE FOR CHAIR DINING, SS DOOR STOPPER DOUBLE LEG 100MM LONG, SS DOOR STOPPER SINGLE LEG 125MM LONG, STAINLESS STELL BUTT HINGES 100MM HEAVY DUTY SS 302, STAINLESS STELL BUTT HINGES 75MM HEAVY DUTY SS 302, SWITCH SOCKET COMBINATION 4 HOLES 06 AMP, NON MODULAR, SWITCH SOCKET COMBINATION 4 HOLES 16 AMP, NON MODULAR, TEAK WOOD HANDREST FOR CHAIR CB STEEL WITH ARMS, TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITH ARM, TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM, TELESCOPIC CHANNEL FOR TABLE DRAWER, GI WIREMESH 0. 40MM DIA WIRE ROLL SIZE 15MTRX. 90 MTR in NASHIK, MAHARASHTRA. Quantity: 2788 by. Submission Deadline: 21-09-2026 13: 00: 00. Check eligibility and apply.
Tender Data
Bid Details
Quantity
2788
Category
Hydraulically Regulated Door Closers ISI Marked to 3564
Bid Type
Two Packet Bid
Bid Validity
90 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
50% Lowest Priced Technically Qualified Bidders
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Warranty Period
5 years
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Item Category
Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Hydraulically Regulated Door Closers ISI Marked to 3564 (Q3) , ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996 , ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996 , ALDROP BOLT SS 250MM ROUND NUCKLE ROD DIA 12MM 202 GRADE , ALDROP BOLT SS 300MM ROUND NUCKLE ROD DIA 12MM 202 GRADE , BOW HANDLE SS 100MM , ELECT FAN REGULATOR 100 WATT MINI , ELECT SOCKET 16 AMP,MODULAR , FEVICOL SH , FLUSHING CISTERN KIT , GI CHECK NUT 32MM ISI , HANDLE CP FOR STEEL ALMIRAH 15MM WIDE 130MM LONG , HANDLE MS FOR WINDOW LEFT AND RIGHT 300MM LONG , HASP AND STAPLE ALUM 20MM WIDE 75MM LONG , HASP AND STAPLE ALUM 30MM WIDE 100MM LONG , HIGH PRESSURE HDPE FLOAT VALVE 15MM , HIGH PRESSURE HDPE FLOAT VALVE 20MM , KNOB FOR CUPBOARD WITH SCREW DIA 30MM , ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD , PRELAMINATED PARTICLE BOARD 8FTX4FTX12MM BSL , PRELAMINATED PARTICLE BOARD 8FTX4FTX19MM BSL , PVC SEAT AND BACK FOR CHAIR VERANDAH , PVC SEAT CHAIR DINING , PVC SHOE FOR CHAIR DINING , SS DOOR STOPPER DOUBLE LEG 100MM LONG , SS DOOR STOPPER SINGLE LEG 125MM LONG , STAINLESS STELL BUTT HINGES 100MM HEAVY DUTY SS 302 , STAINLESS STELL BUTT HINGES 75MM HEAVY DUTY SS 302 , SWITCH SOCKET COMBINATION 4 HOLES 06 AMP,NON MODULAR , SWITCH SOCKET COMBINATION 4 HOLES 16 AMP,NON MODULAR , TEAK WOOD HANDREST FOR CHAIR CB STEEL WITH ARMS , TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITH ARM , TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM , TELESCOPIC CHANNEL FOR TABLE DRAWER , GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
2
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
NASHIK CITY
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | NASHIK CITY | NASHIK CITY | - | - | 21 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
GeM-Bidding-9773351.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
34 Items Sign in to view GEM price trends Sign in for GEM prices
ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996
ALDROP BOLT ALUMINIUM 250MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996
ALDROP BOLT ALUMINIUM 300MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
ALDROP BOLT SS 250MM ROUND NUCKLE ROD DIA 12MM 202 GRADE
ALDROP BOLT 202 GRADE STAINLESS STEEL 250MM WITH ROUND NUCKLE 12MM ROD DIA MAKE - PRAYAG, ,CORONET,HARRISON,LINK,EBCO,CROWN,CLASSIC
ALDROP BOLT SS 300MM ROUND NUCKLE ROD DIA 12MM 202 GRADE
ALDROP BOLT 202 GRADE STAINLESS STEEL 300MM WITH ROUND NUCKLE 12MM ROD DIA MAKE - PRAYAG, ,CORONET,HARRISON,LINK,EBCO,CROWN,CLASSIC
BOW HANDLE SS 100MM
BOW HANDLE SS 100MM WITH ROD DIA 12MM D SHAPE MAKE - PRAYAG, ,CORONET,HARRISON,LINK,EBCO.
ELECT FAN REGULATOR 100 WATT MINI
ELECTRIC FAN REGULATOR SHALL BE 100 WATT NON MODULAR TYPE SHALL HAVE 250 VOLTS .MAKE-ANCHOR,KINJAL,HAVELLS,LEGRAND,PANASONIC
ELECT SOCKET 16 AMP,MODULAR
ELECTRIC SOCKET SHALL BE 16 AMP MODULAR TYPE SHALL HAVE 250 VOLTS .MAKE-ANCHOR,KINJAL,HAVELLS,LEGRAND,PANASONIC
FEVICOL SH
FEVICOL SH IN 1 KG PACKAGE ,MAKE-PIDILITE,WOODGLUE,MERINO
FLUSHING CISTERN KIT
FLUSHING CISTERN KIT COMPL FOR SINGLE FLUSH ,MAKE - PRAYAG, ,CORONET,SPARSH,POLYTUF,PRIMA,JAINKO,
GI CHECK NUT 32MM ISI
GI CHECK NUT 32MM HEAVY DUTY ISI MARKED,MAKE-UNIK,RK,ASI,JAL,APPOLO
HANDLE CP FOR STEEL ALMIRAH 15MM WIDE 130MM LONG
CHROME PLATED HANDLE FOR STEEL ALMIRAH 130 MM LONG MAKE -LINK,HARRISON,GODREJ,EBCO,HETTICH OR ISI MARKED
HANDLE MS FOR WINDOW LEFT AND RIGHT 300MM LONG
HANDLE FOR STEEL WIINDOW MADE OF MS 100 MM LONG MAKE -LINK,HARRISON,GODREJ,EBCO,HETTICH OR ISI MARKED
HASP AND STAPLE ALUM 20MM WIDE 75MM LONG
HASP AND STAPLE MADE OF ALUMINIUM 20MM WIDE 75MM LONG WITH MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
HASP AND STAPLE ALUM 30MM WIDE 100MM LONG
HASP AND STAPLE MADE OF ALUMINIUM 30MM WIDE 100MM LONG WITH MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
HIGH PRESSURE HDPE FLOAT VALVE 15MM
PVC FLOAT VALVE 15MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET
HIGH PRESSURE HDPE FLOAT VALVE 20MM
PVC FLOAT VALVE 20MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET
KNOB FOR CUPBOARD WITH SCREW DIA 30MM
KNOB SHALL BE OF HIGH QUALITY SS MATERIAL OF DIA NOT LESS THAN 30MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA OR ISI MARKED
ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD
PVC ONE PIECE SEAT SHALL BE MADE OF PPCP MATERIAL HAVING NOT LESS THAN 4MM THICKNESS AND WEIGHT NOT LESS THAN 2800 GMS THE SEAT SHALL BE IN RED OR BLUE COLOUR WITH ARRANGEMENT OF FIXING ON CHAIR WITH WOODEN SCREWS MAKE - CELLO,AMKO,BLOWPLAST,HARMONY,BRITE
PRELAMINATED PARTICLE BOARD 8FTX4FTX12MM BSL
PRELAMINATED PARTICLE BOARD 8FT X 4FT X 12MM BOTH SIDE LAMINATED EXTERIOR GRADE ,MAKE-KITPLY,GREENPLY,CENTURY,ARCHID
PRELAMINATED PARTICLE BOARD 8FTX4FTX19MM BSL
PRELAMINATED PARTICLE BOARD 8FT X 4FT X 19MM BOTH SIDE LAMINATED EXTERIOR GRADE ,MAKE-KITPLY,GREENPLY,CENTURY,ARCHID
PVC SEAT AND BACK FOR CHAIR VERANDAH
SIZE OF SEAT AND BACK SHALL BE 455MMX455MM.THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 1.85 KGS.THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY
PVC SEAT CHAIR DINING
SIZE OF SEAT SHALL BE 410MMX395MM .THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 0.50 KGS.THE PVC SEAT SHALL HAVE 4X10MM THICK RIBS MOULDED ALONG WITH SEAT IN SINGLE PIECE. THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES. MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY
PVC SHOE FOR CHAIR DINING
PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC HAVING DIA NOT LESS THAN 25MM AND HIGH NOT LESS THAN 6MM,THE SHOE SHALL HAVE PROVISION OF HOLE AT CENTRE FOR FIXING TO LEG
SS DOOR STOPPER DOUBLE LEG 100MM LONG
SS DOOR STOPPER DOUBLE LEG 125MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
SS DOOR STOPPER SINGLE LEG 125MM LONG
SS DOOR STOPPER SINGLE LEG 100MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
STAINLESS STELL BUTT HINGES 100MM HEAVY DUTY SS 302
STAINLESS STEEL BUTT HINGES 100MM MADE OF SS 202 GRADE ,MAKE- PRAYAG, CORONET ,CROWN,GLOBAL,LINK,HARRISON
STAINLESS STELL BUTT HINGES 75MM HEAVY DUTY SS 302
STAINLESS STEEL BUTT HINGES 75MM MADE OF SS 202 GRADE ,MAKE- PRAYAG, CORONET ,CROWN,GLOBAL,LINK,HARRISON
SWITCH SOCKET COMBINATION 4 HOLES 06 AMP,NON MODULAR
THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 6 AMP WITH 4 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC
SWITCH SOCKET COMBINATION 4 HOLES 16 AMP,NON MODULAR
THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 16 AMP WITH 4 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC
TEAK WOOD HANDREST FOR CHAIR CB STEEL WITH ARMS
THE WOODEN ARMS SHALL BE MADE OF TEAK OR SHESSHAM WOOD THE ARM SHALL BE MADE SMOOTH AND POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY
TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITH ARM
SIZE OF SEAT AND BACK SHALL BE 495MM X 495MM X25MM THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0 POINT 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY
TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM
SIZE OF SEAT AND BACK SHALL BE 445MM X 445MM X25MM THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0 POINT 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY
TELESCOPIC CHANNEL FOR TABLE DRAWER
SS TELESCOPIC CHANNEL 14 INCH LONG,MAKE-PRAYAG,HARRISON,LINK,EBCO,HETTICH
GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR
GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR HOT DIP GALVANISED AS PER IS 4827 MAKE -SUPREME,AK,JJL,SH OR AS PER IS 4826
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996 | ALDROP BOLT ALUMINIUM 250MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 100 | nos | agerb | 30 | |
| 2 | ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996 | ALDROP BOLT ALUMINIUM 300MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 61 | nos | agerb | 30 | |
| 3 | ALDROP BOLT SS 250MM ROUND NUCKLE ROD DIA 12MM 202 GRADE | ALDROP BOLT 202 GRADE STAINLESS STEEL 250MM WITH ROUND NUCKLE 12MM ROD DIA MAKE - PRAYAG, ,CORONET,HARRISON,LINK,EBCO,CROWN,CLASSIC | 80 | nos | agerb | 30 | |
| 4 | ALDROP BOLT SS 300MM ROUND NUCKLE ROD DIA 12MM 202 GRADE | ALDROP BOLT 202 GRADE STAINLESS STEEL 300MM WITH ROUND NUCKLE 12MM ROD DIA MAKE - PRAYAG, ,CORONET,HARRISON,LINK,EBCO,CROWN,CLASSIC | 146 | nos | agerb | 30 | |
| 5 | BOW HANDLE SS 100MM | BOW HANDLE SS 100MM WITH ROD DIA 12MM D SHAPE MAKE - PRAYAG, ,CORONET,HARRISON,LINK,EBCO. | 25 | nos | agerb | 30 | |
| 6 | ELECT FAN REGULATOR 100 WATT MINI | ELECTRIC FAN REGULATOR SHALL BE 100 WATT NON MODULAR TYPE SHALL HAVE 250 VOLTS .MAKE-ANCHOR,KINJAL,HAVELLS,LEGRAND,PANASONIC | 8 | nos | agerb | 30 | |
| 7 | ELECT SOCKET 16 AMP,MODULAR | ELECTRIC SOCKET SHALL BE 16 AMP MODULAR TYPE SHALL HAVE 250 VOLTS .MAKE-ANCHOR,KINJAL,HAVELLS,LEGRAND,PANASONIC | 76 | nos | agerb | 30 | |
| 8 | FEVICOL SH | FEVICOL SH IN 1 KG PACKAGE ,MAKE-PIDILITE,WOODGLUE,MERINO | 15 | kgs | agerb | 30 | |
| 9 | FLUSHING CISTERN KIT | FLUSHING CISTERN KIT COMPL FOR SINGLE FLUSH ,MAKE - PRAYAG, ,CORONET,SPARSH,POLYTUF,PRIMA,JAINKO, | 15 | nos | agerb | 30 | |
| 10 | GI CHECK NUT 32MM ISI | GI CHECK NUT 32MM HEAVY DUTY ISI MARKED,MAKE-UNIK,RK,ASI,JAL,APPOLO | 159 | nos | agerb | 30 | |
| 11 | HANDLE CP FOR STEEL ALMIRAH 15MM WIDE 130MM LONG | CHROME PLATED HANDLE FOR STEEL ALMIRAH 130 MM LONG MAKE -LINK,HARRISON,GODREJ,EBCO,HETTICH OR ISI MARKED | 74 | nos | agerb | 30 | |
| 12 | HANDLE MS FOR WINDOW LEFT AND RIGHT 300MM LONG | HANDLE FOR STEEL WIINDOW MADE OF MS 100 MM LONG MAKE -LINK,HARRISON,GODREJ,EBCO,HETTICH OR ISI MARKED | 4 | nos | agerb | 30 | |
| 13 | HASP AND STAPLE ALUM 20MM WIDE 75MM LONG | HASP AND STAPLE MADE OF ALUMINIUM 20MM WIDE 75MM LONG WITH MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 34 | nos | agerb | 30 | |
| 14 | HASP AND STAPLE ALUM 30MM WIDE 100MM LONG | HASP AND STAPLE MADE OF ALUMINIUM 30MM WIDE 100MM LONG WITH MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 194 | nos | agerb | 30 | |
| 15 | HIGH PRESSURE HDPE FLOAT VALVE 15MM | PVC FLOAT VALVE 15MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET | 68 | nos | agerb | 30 | |
| 16 | HIGH PRESSURE HDPE FLOAT VALVE 20MM | PVC FLOAT VALVE 20MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET | 88 | nos | agerb | 30 | |
| 17 | KNOB FOR CUPBOARD WITH SCREW DIA 30MM | KNOB SHALL BE OF HIGH QUALITY SS MATERIAL OF DIA NOT LESS THAN 30MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA OR ISI MARKED | 130 | nos | agerb | 30 | |
| 18 | ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD | PVC ONE PIECE SEAT SHALL BE MADE OF PPCP MATERIAL HAVING NOT LESS THAN 4MM THICKNESS AND WEIGHT NOT LESS THAN 2800 GMS THE SEAT SHALL BE IN RED OR BLUE COLOUR WITH ARRANGEMENT OF FIXING ON CHAIR WITH WOODEN SCREWS MAKE - CELLO,AMKO,BLOWPLAST,HARMONY,BRITE | 16 | nos | agerb | 30 | |
| 19 | PRELAMINATED PARTICLE BOARD 8FTX4FTX12MM BSL | PRELAMINATED PARTICLE BOARD 8FT X 4FT X 12MM BOTH SIDE LAMINATED EXTERIOR GRADE ,MAKE-KITPLY,GREENPLY,CENTURY,ARCHID | 71 | nos | agerb | 30 | |
| 20 | PRELAMINATED PARTICLE BOARD 8FTX4FTX19MM BSL | PRELAMINATED PARTICLE BOARD 8FT X 4FT X 19MM BOTH SIDE LAMINATED EXTERIOR GRADE ,MAKE-KITPLY,GREENPLY,CENTURY,ARCHID | 30 | nos | agerb | 30 | |
| 21 | PVC SEAT AND BACK FOR CHAIR VERANDAH | SIZE OF SEAT AND BACK SHALL BE 455MMX455MM.THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 1.85 KGS.THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY | 65 | nos | agerb | 30 | |
| 22 | PVC SEAT CHAIR DINING | SIZE OF SEAT SHALL BE 410MMX395MM .THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 0.50 KGS.THE PVC SEAT SHALL HAVE 4X10MM THICK RIBS MOULDED ALONG WITH SEAT IN SINGLE PIECE. THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES. MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY | 73 | nos | agerb | 30 | |
| 23 | PVC SHOE FOR CHAIR DINING | PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC HAVING DIA NOT LESS THAN 25MM AND HIGH NOT LESS THAN 6MM,THE SHOE SHALL HAVE PROVISION OF HOLE AT CENTRE FOR FIXING TO LEG | 197 | nos | agerb | 30 | |
| 24 | SS DOOR STOPPER DOUBLE LEG 100MM LONG | SS DOOR STOPPER DOUBLE LEG 125MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 12 | nos | agerb | 30 | |
| 25 | SS DOOR STOPPER SINGLE LEG 125MM LONG | SS DOOR STOPPER SINGLE LEG 100MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 25 | nos | agerb | 30 | |
| 26 | STAINLESS STELL BUTT HINGES 100MM HEAVY DUTY SS 302 | STAINLESS STEEL BUTT HINGES 100MM MADE OF SS 202 GRADE ,MAKE- PRAYAG, CORONET ,CROWN,GLOBAL,LINK,HARRISON | 16 | nos | agerb | 30 | |
| 27 | STAINLESS STELL BUTT HINGES 75MM HEAVY DUTY SS 302 | STAINLESS STEEL BUTT HINGES 75MM MADE OF SS 202 GRADE ,MAKE- PRAYAG, CORONET ,CROWN,GLOBAL,LINK,HARRISON | 74 | nos | agerb | 30 | |
| 28 | SWITCH SOCKET COMBINATION 4 HOLES 06 AMP,NON MODULAR | THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 6 AMP WITH 4 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC | 77 | nos | agerb | 30 | |
| 29 | SWITCH SOCKET COMBINATION 4 HOLES 16 AMP,NON MODULAR | THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 16 AMP WITH 4 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC | 72 | nos | agerb | 30 | |
| 30 | TEAK WOOD HANDREST FOR CHAIR CB STEEL WITH ARMS | THE WOODEN ARMS SHALL BE MADE OF TEAK OR SHESSHAM WOOD THE ARM SHALL BE MADE SMOOTH AND POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY | 97 | nos | agerb | 30 | |
| 31 | TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITH ARM | SIZE OF SEAT AND BACK SHALL BE 495MM X 495MM X25MM THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0 POINT 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY | 146 | nos | agerb | 30 | |
| 32 | TEAK WOOD SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM | SIZE OF SEAT AND BACK SHALL BE 445MM X 445MM X25MM THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0 POINT 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY | 90 | nos | agerb | 30 | |
| 33 | TELESCOPIC CHANNEL FOR TABLE DRAWER | SS TELESCOPIC CHANNEL 14 INCH LONG,MAKE-PRAYAG,HARRISON,LINK,EBCO,HETTICH | 16 | nos | agerb | 30 | |
| 34 | GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR | GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR HOT DIP GALVANISED AS PER IS 4827 MAKE -SUPREME,AK,JJL,SH OR AS PER IS 4826 | 382 | kgs | agerb | 30 |
Categories
48
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender