SKY WALKER-DOUBLE,PARALLEL BAR-SINGLE,CHEST PRESS-DOUBLE,LEG PRESS-DOUBLE,SIT UP BOARD-DOUBLE,DOUBL
Airports Authority Of India
CHENNAI, TAMIL NADU
Posted:
20 December 2024
Closed:
10 January 2025
GEM
GEM
Invitation to Bid - Air Walker,Shoulder Press Single,Horse Rider,Surf Board,Cycle,Parallel bar,Rowing,Cross Walker,Abs in MAHARAJGANJ, UTTAR PRADESH
Bid Publish Date
08-Jun-2026, 3:38 pm
Bid End Date
09-Jul-2026, 2:00 pm
EMD
₹3,06,000
Location
Progress
Issue08-Jun-2026, 3:38 pm
AwardPending
Quantity
252
Category
Bridge Ladder
Bid Type
Two Packet Bid
Categories
35
GALVANISED PIPE CIRCULAR SAW BUFFER PLATE BRIDGE AXLE ALTERNATOR BUILDING CONSTRUCTION EQUIPMENT TODDLER SILDE ARCHERY BOWS BANJOES STEEL PIPE STRUCTURE FABRICATION BOLTS FABRICATOR MACHINE ALLOY PLASTIC CARBON STEEL PIPE SEAMLESS PIPE NUTS BASE PLATE HORSE TUBE AND FITTING BEARINGS WATER LEVEL RECORDER PRESS METAL PRODUCTS BAR STEEL FURNITURE ERECTION OF STRUCTURAL POLYMERASE CHAIN REACTION PCR STRING INSTRUMENTS HARDWARE AND FASTENERS MANUFACTURING SERVICES FERROUS ALLOY SUPPLY
Public procurement opportunity for E-municipalities - Eservices To Citizens And Employees Of Urban Local Bodies Of Uttar Pradesh Air Walker, Shoulder Press Single, Horse Rider, Surf Board, Cycle, Parallel bar, Rowing, Cross Walker, Abs Shaper Single, Bridge Ladder, Arm Wheel 2 wheel, Leg Press Single, Leg Press Double, Horizontal Bar, See Saw, Leg Extension, Twister Single, Back Extension, Installation work in MAHARAJGANJ, UTTAR PRADESH. Quantity: 252 issued by. Submission Deadline: 09-07-2026 14: 00: 00. View full details and respond.
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Air Walker , Shoulder Press Single , Horse Rider , Surf Board , Cycle , Parallel bar , Rowing , Cross Walker , Abs Shaper Single , Bridge Ladder , Arm Wheel 2 wheel , Leg Press Single , Leg Press Double , Horizontal Bar , See Saw , Leg Extension , Twister Single , Back Extension , Installation work
Authority Records
URBAN DEVELOPMENT DEPARTMENT
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Bid Preparation
GeM Registration
Document Filing
Free consultation · 24h response
Documents 4
GeM-Bidding-9421379.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
Dual Air Walker,Arm Shoulder Wheel,Sit Up Board Double,Triple Twister,Surf Board,Leg Press Dual,Che
Indian Army
HOSHANGABAD, MADHYA PRADESH
Posted:
11 July 2025
Closed:
25 July 2025
GEM
Social Justice And Empowerment Department Rajasthan Gym Equipment Tender Karauli Rajasthan 2026
Social Justice And Empowerment
KARAULI, RAJASTHAN
Posted:
17 January 2026
Closed:
2 February 2026
GEM
Indian Army Fitness Equipment Tender Jodhpur Rajasthan 2026 – Exercise Bikes, Climber, Leg Press, ISO/ISI Standards (if any) and 1-Year Warranty
Indian Army
JODHPUR, RAJASTHAN
Posted:
15 January 2026
Closed:
26 January 2026
GEM
Air Swing Walker,Pack Deck,Leg Press,Surf Board,Rower,Reciprocated Sky Walker,Cross Trainer,Push Up
N/a
INDORE, MADHYA PRADESH
Posted:
9 April 2026
Closed:
2 May 2026
GEM
Tender Results
Loading results...
Bill of Quantities (BOQ)
19 Items Sign in to view GEM price trends Sign in for GEM prices
#1
Air Walker
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover..
7 nos
Delivery: 20 days
#2
Shoulder Press Single
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover
7 nos
Delivery: 20 days
#3
Horse Rider
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover
7 nos
Delivery: 20 days
#4
Surf Board
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#5
Cycle
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#6
Parallel bar
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#7
Rowing
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#8
Cross Walker
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#9
Abs Shaper Single
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#10
Bridge Ladder
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#11
Arm Wheel 2 wheel
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp and burrs. All open ends of pipe to be closed with GI or LLDPE caps base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#12
Leg Press Single
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#13
Leg Press Double
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#14
Horizontal Bar
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#15
See Saw
Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nob Galvanized el or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#16
Leg Extension
Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#17
Twister Single
Galvanized Carbon steel pipe and powder coated 80 to 100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI or LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in built limiters. fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#18
Back Extension
Galvanized Carbon steel pipe and powder coated 80 to 100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.
7 nos
Delivery: 20 days
#19
Installation work
Installation work on site with all complete
126 nos
Delivery: 20 days
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Air Walker | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.. | 7 | nos | [email protected] | 20 | |
| 2 | Shoulder Press Single | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover | 7 | nos | [email protected] | 20 | |
| 3 | Horse Rider | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover | 7 | nos | [email protected] | 20 | |
| 4 | Surf Board | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 5 | Cycle | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 6 | Parallel bar | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 7 | Rowing | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 8 | Cross Walker | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 9 | Abs Shaper Single | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 10 | Bridge Ladder | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 11 | Arm Wheel 2 wheel | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp and burrs. All open ends of pipe to be closed with GI or LLDPE caps base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 12 | Leg Press Single | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 13 | Leg Press Double | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 14 | Horizontal Bar | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 15 | See Saw | Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nob Galvanized el or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 16 | Leg Extension | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 17 | Twister Single | Galvanized Carbon steel pipe and powder coated 80 to 100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI or LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in built limiters. fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 18 | Back Extension | Galvanized Carbon steel pipe and powder coated 80 to 100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. | 7 | nos | [email protected] | 20 | |
| 19 | Installation work | Installation work on site with all complete | 126 | nos | [email protected] | 20 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
Experience Criteria
2
Past Performance
3
Bidder Turnover
4
Certificate (Requested in ATC)
5
OEM Authorization Certificate
6
OEM Annual Turnover
7
Additional Doc 1 (Requested in ATC)
8
Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
9
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Similar Tenders
5 found
Air Walker,Shoulder Press Single,Horse Rider,Surf Board,Cycle,Parallel bar,Rowing,Cross Walker,Abs
E-municipalities - Eservices To Citizens And Employees Of Urban Local Bodies Of Uttar Pradesh
📍 MAHARAJGANJ, UTTAR PRADESH
EMD: ₹3.1 L
⏰ Deadline: 4 weeks left
🛒 Type: Goods
View
GEM
Air Walker,Shoulder Press Single,Horse Rider,Surf Board,Cycle,Parallel bar,Rowing,Cross Walker,Abs
E-municipalities - Eservices To Citizens And Employees Of Urban Local Bodies Of Uttar Pradesh
📍 MAHARAJGANJ, UTTAR PRADESH
EMD: ₹3.1 L
⏰ Deadline: 2 months left
🛒 Type: Goods
View
GEM
Urgent
Double Air Walker,Rowing Machine,Standing Twister,Leg Press,Single Pull Chair
Kendriya Vidyalaya Sangathan
📍 AGRA, UTTAR PRADESH
Est: ₹6.0 L
⏰ Deadline: 7 days left
🛒 Type: Goods
View
GEM
Urgent
4 IN 1 MACHINE,DOUBLE CHEST PRESS,DOUBLE CROSS WALKER,DOUBLE BENCH PRESS,HORSE RIDER,TWISTER,DOUBLE
Urban Administration And Devlopment
📍 KHARGONE, MADHYA PRADESH
EMD: ₹50,000
⏰ Deadline: 2 days left
🛒 Type: Goods
View
GEM
Urgent
Art Rotation Ring Stand,Double Seated Puller,Double Leg Press,Triple Seated And Standing Twister Se
Directorate Of Industries
📍 SAMASTIPUR, BIHAR
⏰ Deadline: 2 days left
🛒 Type: Goods
View
GEM
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 4
GeM-Bidding-9421379.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS