Bank Of Baroda Vault (Strong Room) Door Tender Pancha Mahals Gujarat IS 11188 BIS 2026
Bank Of Baroda
PANCH MAHALS, GUJARAT
Progress
Quantity
2
Bid Type
Two Packet Bid
Public procurement opportunity for Union Bank Of India (ubi) Vault (Strong Room) Door as per IS 11188 (Q2) in AHMEDABAD, GUJARAT. Quantity: 2 issued by. Submission Deadline: 29-07-2026 18: 00: 00. View full details and respond.
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Vault (Strong Room) Door as per IS 11188 (Q2)
Advisory Bank
Bank of India
Payment Timelines
Payments shall be made to the Seller within 15 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
Ahmadabad
Delivery Pincodes
380001
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Ashutosh Kumar Singh | 380001,Union Bank of India Navrangpura Near Head Post Office Navrangpura, Ahemedabad | Ahmadabad | Gujarat | 380001 | 2 | 15 | - |
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Main Document
CATALOG Specification
OTHER
GEM_GENERAL_TERMS_AND_CONDITIONS
Bank Of Baroda
PANCH MAHALS, GUJARAT
Union Bank Of India (ubi)
MEERUT, UTTAR PRADESH
Union Bank Of India (ubi)
KURNOOL, ANDHRA PRADESH
State Bank Of India (sbi)
BIKANER, RAJASTHAN
Punjab And Sind Bank
KAMRUP, ASSAM
Tender Results
Loading results...
| Category | Specification | Requirement |
|---|---|---|
| Generic | Type of Vault (Strong Room) Door | Vault Main Doors |
| Generic | Classification of Vault (Strong Room) Door | B Class - TRTL 30, FR 30 |
| Generic | Opening of Door | Right Hand Side |
| Dimensions | Height of Door (Maximum) in mm | 2300 |
| Dimensions | Height of Door (Minimum) in mm | 2100 |
| Dimensions | Width of Door (Maximum) in mm | 1400 |
| Dimensions | Width of Door (Minimum) in mm | 1250 |
| Dimensions | Inside Height or clear opening of Door, when the shutter swings 180º in mm | 1950 |
| Dimensions | Inside Width or Clear Opening of Door, when the shutter swings 180º in mm | 900 |
| Dimensions | Minimum Thickness of door frame in mm if the door frame is made by single plate which is multi bended to form the door frame | 10 |
| Dimensions | Minimum Thickness of door frame in mm if the door frame is made by fabricating angle or any channel | NA |
| Dimensions | Thickness of Angles for Grill Gate | 5.0 Or higher |
| Dimensions | Diameter of Grill Gate Road | 19.0 Or higher |
| Dimensions | Minimum Pitch of Grill Gate Road | 100.0 Or lower |
| Dimensions | Thickness of Door Slabs over Rebates in mm | ≥29 |
| Dimensions | Thickness of Door Slabs over Lock in mm | ≥50 |
| Dimensions | Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates) | ≥20 |
| Dimensions | Door Wall Thickness in mm | 305~380 |
| Dimensions | Actual Wall Thickness in mm | 300.0 Or higher |
| Dimensions | Number of Shooting Bolts on Hinge Side | 6 |
| Dimensions | Number of Shooting Bolts on Opposite Hinge Side | 6 |
| Dimensions | Number of Shooting Bolts on Top | NA |
| Dimensions | Number of Shooting Bolts on Bottom Side | NA |
| Dimensions | Cross section Area of Single Shooting Bolt | 1134.0 Or higher |
| Dimensions | Depth of Engagement of Shooting Bolt in mm | ≥15 |
| Construction | Compression Mechanism | A continuous resilient packing is incorporated in the frame for compression mechanism for clenching the door tight against this packing in doors, this helps liquids or gases to pass through |
| Construction | Time Lock (Optional) | NA |
| Construction | Vault Lighting Control | A control switch is fitted on the main door to automatically control the electric supply to the vault. |
| Certification | Doors are Tested as approved by BIS | Class B Burglary resistance as per IS 11188 Part 2, Fire Endurance 11188 Part 3, Fire Hose Stream Reheat 11188 Part 4 |
| Certification | Warranty Period | 1.0 |
Discover companies most likely to bid on this tender
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Additional Doc 2 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Canara Bank
📍 CHANDIGARH, CHANDIGARH
Tamil Nadu Grama Bank
📍 SALEM, TAMIL NADU
Union Bank Of India (ubi)
📍 JORHAT, ASSAM
Union Bank Of India (ubi)
📍 THIRUVANANTHAPURAM, KERALA
Punjab National Bank
Sign up now to access all documents
Main Document
CATALOG Specification
OTHER
GEM_GENERAL_TERMS_AND_CONDITIONS