TenderDekho Logo
GEM

Contract Bidding Open For Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M,Dismantling of Existing FWSS Tan

Bid Publish Date

30-Oct-2024, 10:05 pm

Bid End Date

16-Nov-2024, 12:00 pm

Value

₹4,46,43,120

Latest Corrigendum Available

Progress

Issue30-Oct-2024, 10:05 pm
Technical14-11-2024 14:58:07
Financial
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

58517

Category

Supply fabrication and erection of 4 inches GI PIPE LINE

Bid Type

Two Packet Bid

Categories 94

WELDING WIRE APPARELS FITMENT ELECTRODES IRRIGATION APFC PANEL ROTATING PISTON PUMPS BOX PUSHING BARE METAL SPOTTING SCOPE PAINTING ARCHERY BOWS STRUCTURE FABRICATION BOLTS STORAGE AND WAREHOUSING WELDING MACHINE PARTS STEEL ELECTRODE WASHERS GASKETS AND SEALS ASBESTOS PLUNGER PUMPS WATER SUPPLY PROJECT COATING THICKNESS TECHNICAL SERVICES NUTS PIPE PROJECT TUBE AND FITTING ARNO STARTING CONTACTOR NON RETURN VALVE TENSILE ELECTRODE VALVE WATER LEVEL RECORDER WELDING FLUX WATER SUPPLY MATERIAL WELDING ELECTRODE BEVELS FILTER RETAINERS WHEAT FLOUR BEARING SHELL THRUST OFFSET PRINTING SPRAYER ELECTROCARDIOGRAPHY UNITS FUME HOODS STEEL FURNITURE ERECTION OF STRUCTURAL FLANGE SUPPLY DUE DILIGENCE FIRE SUPPRESSION SYSTEM OIL AND GAS DRILLING EQUIPMENT HARDWARE AND FASTENERS CLAMPS BLIND FLANGES JOINTING OF PIPE EXHAUST SYSTEM FABRICATION WORK TUBES AND PIPES RUBBER GASKET PIPING ARCHITECTURAL DRAWING WELDING TIP BOILER MOUNTING VALVE CLOTHING FLANGE FABRICATOR MINING ENGINEERING LIFT IRRIGATION MS PIPE LINE MILITARY VEHICLE MATERIAL LOADING VALVE PARTS AND ACCESSORIES GOLD MEDAL SOLID ROCKET MOTORS UNLOADING OF MATERIAL WATER SUPPLY STOMACHERS ESCRAP MATERIAL UNLOADING NOZZLE POWER ALUMINIUM ALLOY SEALING RING PEB PIPES UPVC PIPE SCAFFOLDING WATERING FACILITY METAL PRODUCTS IRON SUPPLY GI PIPE BLASTING MACHINE MANUFACTURING SERVICES SHIFTING OF MATERIAL EARTH MOVER GALVANIZED IRON PIPE

Bharat Petroleum Corporation Ltd invites bids for Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M, Dismantling of Existing FWSS Tank 5and 6 and 7 and 8 each Dia 33 M, Dismantling of Existing FWSS Tank 9 and 10 each Dia 26 M, Dismantling of Existing FWSS Tank 14 and 15 and 16 and 17 each Dia 24 M, Dismantling of Existing FWSS Tank 11 and 12 and 13 and 18 and 19 each Dia 9 M, Supply fabrication and erection of 10 inches Class B GI PIPE LINE, Supply Fabrication welding of SORF 150 class GI 10 inches GI SORF FLANGE, Supplying Fabrication welding testing and commissioning of 10 inches GI 90 DEGREES BeND, Supplying Fabrication welding testing and commissioning of 10inches GI 45 DEGREES BeND, Supplying Fabrication welding testing and commissioning of 10 inches to 8 inches GI REDUCER, Supplying Fabrication welding testing and commissioning of 8 inches to 6 inches GI REDUCER, Supply fabrication and erection of 8 inches GI PIPE LINE, Supply Fabrication welding of SORF 150class 8 inches GI SORF FLANGE, Supplying Fabrication welding testing and commissioning of 8 inches 90 DEGREES GI BEND, Supplying Fabrication welding testing and commissioning of 8 inches GI 45 DEGREES BEND, Supply fabrication and erection of 6inches GI PIPE LINE, Supply Fabrication welding of SORF150class 6 inches GI SORF FLANGE, Supplying Fabrication welding testing and commissioning of 6inches GI 90 DEGREES BEND, Supplying Fabrication welding testing and commissioning of GI 45 DEGREES BEND, Supply and making connection of 6 inches blind flanges to blind the top end of the sprinkler line, Supplying and Fixing 150 class CS Plate type 6 inches non return valve Plate type, Supply fabrication and erection of 4 inches GI PIPE LINE, Supply Fabrication welding of SORF150class GI 4inches GI SORF FLANGE, Supplying Fabrication welding testing and commissioning of 4inches GI 90 BAND, Supplying Fabrication welding testing and commissioning of 4inches GI 45 DEGREE BeND, Supply and making connection of 4 inches blind flanges to blind the top end of the sprinkler line, Supply fabrication and erection of 3inches GI PIPE LINE, Supply Fabrication and welding of SORF150 class GI 3inches SORF, supply and fixing 1inches drain valve with 1 inch pipeline on each riser for tanks, Supply and Fixing Of Water Spray Nozzle half inches. Quantity: 58517. Submission Deadline: 16-11-2024 12: 00: 00. Submit your proposal before the deadline.

Documents 5

GeM-Bidding-7089210.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Dismantling of Pipeline 80MM,Dismantling of Pipeline 100MM,ERECTION OF STEEL SCAFFOLDING,1 inch SS

Hindustan Petroleum Corporation Ltd

Posted: 7 December 2024
Closed: 17 December 2024
GEM

350 NB ERW 150 Class 8mm Thickness Pipe,350 NB WNRF 150 Class Flange,350NB Blind Flange,350 x 300 N

Hindustan Petroleum Corporation Ltd

KOTA, RAJASTHAN

Posted: 23 September 2025
Closed: 4 October 2025
GEM

Lay AG Pipe 25 MM,Lay AG Pipe 20 MM,Pipelines manual clean and painting,Pipelines Band Paint upto 6

Hindustan Petroleum Corporation Ltd

DAKSHINA KANNADA, KARNATAKA

Posted: 2 December 2025
Closed: 12 December 2025
GEM

Hindustan Petroleum Corporation Ltd MS ERW Pipes & Fittings Tender 2025 India - 86000 INR EMD, 25% Quantity Option

Hindustan Petroleum Corporation Ltd

Ajmer, RAJASTHAN

Posted: 6 November 2025
Closed: 17 November 2025
GEM

SUP OF PRIMARY RADAR AG TANKs FR CRVT,EREC INSTAL OF PRIMARY RADAR AG TANKs FR,COMMISIONING TESTING

Hindustan Petroleum Corporation Ltd

Posted: 4 October 2024
Closed: 16 December 2024
GEM

Bill of Quantities (BOQ) 30 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M Vendor need to dismantle the existing sprinkler system on all aboveground tanks. It is to be noted that no hot work will be permitted for dismantling of the existing fixed water spray system. Only cold cutting though hack saw will be permitted for the same. Vendors also need to consider the cost of scaffolding, removal of pipeline, stacking in the scrapyards etc. required for job while bidding. No additional price will be paid for the same. Vendors need to quote the rate for dismantling of sprinkler system different tank sizes as mentioned in price bid form. The rates quotes shall be inclusive of all charges. 4 number deepak@1181 15
2 Dismantling of Existing FWSS Tank 5and 6 and 7 and 8 each Dia 33 M Dismantling of Existing FWSS Tank 5and 6 and 7 and 8 each Dia 33 M Vendor need to dismantle the existing sprinkler system on all aboveground tanks. It is to be noted that no hot work will be permitted for dismantling of the existing fixed water spray system. Only cold cutting though hack saw will be permitted for the same. Vendors also need to consider the cost of scaffolding, removal of pipeline, stacking in the scrapyards etc. required for job while bidding. No additional price will be paid for the same. Vendors need to quote the rate for dismantling of sprinkler system different tank sizes as mentioned in price bid form. The rates quotes shall be inclusive of all charges. 4 number deepak@1181 15
3 Dismantling of Existing FWSS Tank 9 and 10 each Dia 26 M Dismantling of Existing FWSS Tank 9 and 10 each Dia 26 M Vendor need to dismantle the existing sprinkler system on all aboveground tanks. It is to be noted that no hot work will be permitted for dismantling of the existing fixed water spray system. Only cold cutting though hack saw will be permitted for the same. Vendors also need to consider the cost of scaffolding, removal of pipeline, stacking in the scrapyards etc. required for job while bidding. No additional price will be paid for the same. Vendors need to quote the rate for dismantling of sprinkler system different tank sizes as mentioned in price bid form. The rates quotes shall be inclusive of all charges. 2 number deepak@1181 15
4 Dismantling of Existing FWSS Tank 14 and 15 and 16 and 17 each Dia 24 M Dismantling of Existing FWSS Tank 14 and 15 and 16 and 17 each Dia 24 M Vendor need to dismantle the existing sprinkler system on all aboveground tanks. It is to be noted that no hot work will be permitted for dismantling of the existing fixed water spray system. Only cold cutting though hack saw will be permitted for the same. Vendors also need to consider the cost of scaffolding, removal of pipeline, stacking in the scrapyards etc. required for job while bidding. No additional price will be paid for the same. Vendors need to quote the rate for dismantling of sprinkler system different tank sizes as mentioned in price bid form. The rates quotes shall be inclusive of all charges. 4 number deepak@1181 15
5 Dismantling of Existing FWSS Tank 11 and 12 and 13 and 18 and 19 each Dia 9 M Dismantling of Existing FWSS Tank 11 and 12 and 13 and 18 and 19 each Dia 9 M Vendor need to dismantle the existing sprinkler system on all aboveground tanks. It is to be noted that no hot work will be permitted for dismantling of the existing fixed water spray system. Only cold cutting though hack saw will be permitted for the same. Vendors also need to consider the cost of scaffolding, removal of pipeline, stacking in the scrapyards etc. required for job while bidding. No additional price will be paid for the same. Vendors need to quote the rate for dismantling of sprinkler system different tank sizes as mentioned in price bid form. The rates quotes shall be inclusive of all charges. 5 number deepak@1181 15
6 Supply fabrication and erection of 10 inches Class B GI PIPE LINE Supply fabrication and erection of 10 inches Class B GI PIPE LINE The job involves Supply fabrication and welding of Approved make GI pipes of class B Different sizes as per sign requirement as per IS 1239 and IS 3589 Part1 Latest Edition, with ThreadedorBevelled Ends in vertical or horizontal position at all heights, on existing pedestals, including cutting, threading, bending and joining with Class B GI fitting with threadedor welded ends such as tees, bends, unions, elbows, reducers, sockets, check nuts, plug bends etc. Providing necessary GI malleable clamps for holding the pipeline on the support and testing the line as specified complete excluding painting the external surface of pipes and fitting. GI coating thickness to be complying to IS 4736. Rate to be quoted in INCH METER for the piping. Note Under the Price bid form, in the line items involving supply, fabrication and erection of pipeline, Vendor to quote rate inclusive of cost of material handling of pipeline to required height or cost of double scaffolding for pipeline handling or erection at heights 2,800 inm deepak@1181 15
7 Supply Fabrication welding of SORF 150 class GI 10 inches GI SORF FLANGE Supply Fabrication welding of SORF 150 class GI 10 inches GI SORF FLANGE Vendor to quote the rates for Supply Fabrication welding of SORF150 class GI on the pipelines or fittings using approved make or size of welding electrode confirming to IS 814, with three or more runs of weld on the outside or inside as required including cutting and bevelling ends as necessary or cleaning of internal or external surfaces where welding is to be done and grinding of welds etc. as directed. Clearance at various stages after site inspection is included in the above scope. Scope of work shall be for supply and welding of 150 class GI Flanges. Payment shall be made on the INCH DIA of the flange to be welded Flanges shall conform to ASME or ANSI B 16.5. In addition to job Supply, Fabrication, welding of SORF150 class GI, the job of Making flanged joints including supplying and fixing 3mm thick compressed asbestos fibre gasket conforming to IS 2712 hitensile bolts & nuts and double-washers and greasing etc is included in the scope of vendor. No additional price for gasket nuts bolts etc will be paid by BPCL in accordance to job scope document 500 ind deepak@1181 15
8 Supplying Fabrication welding testing and commissioning of 10 inches GI 90 DEGREES BeND Supplying Fabrication welding testing and commissioning of 10 inches GI 90 DEGREES BeND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 240 ind deepak@1181 15
9 Supplying Fabrication welding testing and commissioning of 10inches GI 45 DEGREES BeND Supplying Fabrication welding testing and commissioning of 10inches GI 45 DEGREES BeND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 240 ind deepak@1181 15
10 Supplying Fabrication welding testing and commissioning of 10 inches to 8 inches GI REDUCER Supplying Fabrication welding testing and commissioning of 10 inches to 8 inches GI REDUCER refer job scope document 108 ind deepak@1181 15
11 Supplying Fabrication welding testing and commissioning of 8 inches to 6 inches GI REDUCER Supplying Fabrication welding testing and commissioning of 8 inches to 6 inches GI REDUCER refer job scope document 224 ind deepak@1181 15
12 Supply fabrication and erection of 8 inches GI PIPE LINE Supply fabrication and erection of 8 inches B class GI PIPE LINE The job involves Supply fabrication and welding of Approved make GI pipes of class B Different sizes as per sign requirement as per IS 1239 and IS 3589 Part1 Latest Edition, with ThreadedorBevelled Ends in vertical or horizontal position at all heights, on existing pedestals, including cutting, threading, bending and joining with Class B GI fitting with threadedor welded ends such as tees, bends, unions, elbows, reducers, sockets, check nuts, plug bends etc. Providing necessary GI malleable clamps for holding the pipeline on the support and testing the line as specified complete excluding painting the external surface of pipes and fitting. GI coating thickness to be complying to IS 4736. Rate to be quoted in INCH METER for the piping. Note Under the Price bid form, in the line items involving supply, fabrication and erection of pipeline, Vendor to quote rate inclusive of cost of material handling of pipeline to required height or cost of double scaffolding for pipeline handling or erection at heights 7,200 inm deepak@1181 15
13 Supply Fabrication welding of SORF 150class 8 inches GI SORF FLANGE Supply Fabrication welding of SORF 150class 8 inches GI SORF FLANGE Vendor to quote the rates for Supply Fabrication welding of SORF150 class GI on the pipelines or fittings using approved make or size of welding electrode confirming to IS 814, with three or more runs of weld on the outside or inside as required including cutting and bevelling ends as necessary or cleaning of internal or external surfaces where welding is to be done and grinding of welds etc. as directed. Clearance at various stages after site inspection is included in the above scope. Scope of work shall be for supply and welding of 150 class GI Flanges. Payment shall be made on the INCH DIA of the flange to be welded Flanges shall conform to ASME or ANSI B 16.5. In addition to job Supply, Fabrication, welding of SORF150 class GI, the job of Making flanged joints including supplying and fixing 3mm thick compressed asbestos fibre gasket conforming to IS 2712 hitensile bolts & nuts and double-washers and greasing etc is included in the scope of vendor. No additional price for gasket nuts bolts etc will be paid by BPCL in accordance to job scope document 1,480 ind deepak@1181 15
14 Supplying Fabrication welding testing and commissioning of 8 inches 90 DEGREES GI BEND Supplying Fabrication welding testing and commissioning of 8 inches 90 DEGREES GI BEND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 480 ind deepak@1181 15
15 Supplying Fabrication welding testing and commissioning of 8 inches GI 45 DEGREES BEND Supplying Fabrication welding testing and commissioning of 8 inches GI 45 DEGREES BEND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 384 ind deepak@1181 15
16 Supply fabrication and erection of 6inches GI PIPE LINE Supply fabrication and erection of 6inches B class GI PIPE LINE The job involves Supply fabrication and welding of Approved make GI pipes of class B Different sizes as per sign requirement as per IS 1239 and IS 3589 Part1 Latest Edition, with ThreadedorBevelled Ends in vertical or horizontal position at all heights, on existing pedestals, including cutting, threading, bending and joining with Class B GI fitting with threadedor welded ends such as tees, bends, unions, elbows, reducers, sockets, check nuts, plug bends etc. Providing necessary GI malleable clamps for holding the pipeline on the support and testing the line as specified complete excluding painting the external surface of pipes and fitting. GI coating thickness to be complying to IS 4736. Rate to be quoted in INCH METER for the piping. Note Under the Price bid form, in the line items involving supply, fabrication and erection of pipeline, Vendor to quote rate inclusive of cost of material handling of pipeline to required height or cost of double scaffolding for pipeline handling or erection at heights 7,200 inm deepak@1181 15
17 Supply Fabrication welding of SORF150class 6 inches GI SORF FLANGE Supply Fabrication welding of SORF150class 6 inches GI SORF FLANGE Vendor to quote the rates for Supply Fabrication welding of SORF150 class GI on the pipelines or fittings using approved make or size of welding electrode confirming to IS 814, with three or more runs of weld on the outside or inside as required including cutting and bevelling ends as necessary or cleaning of internal or external surfaces where welding is to be done and grinding of welds etc. as directed. Clearance at various stages after site inspection is included in the above scope. Scope of work shall be for supply and welding of 150 class GI Flanges. Payment shall be made on the INCH DIA of the flange to be welded Flanges shall conform to ASME or ANSI B 16.5. In addition to job Supply, Fabrication, welding of SORF150 class GI, the job of Making flanged joints including supplying and fixing 3mm thick compressed asbestos fibre gasket conforming to IS 2712 hitensile bolts & nuts and double-washers and greasing etc is included in the scope of vendor. No additional price for gasket nuts bolts etc will be paid by BPCL in accordance to job scope document 1,140 ind deepak@1181 15
18 Supplying Fabrication welding testing and commissioning of 6inches GI 90 DEGREES BEND Supplying Fabrication welding testing and commissioning of 6inches GI 90 DEGREES BEND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 480 ind deepak@1181 15
19 Supplying Fabrication welding testing and commissioning of GI 45 DEGREES BEND Supplying Fabrication welding testing and commissioning of GI 45 DEGREES BEND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 480 ind deepak@1181 15
20 Supply and making connection of 6 inches blind flanges to blind the top end of the sprinkler line Supply and making connection of 6 inches blind flanges to blind the top end of the sprinkler line in accrodance to job scope document 28 number deepak@1181 15
21 Supplying and Fixing 150 class CS Plate type 6 inches non return valve Plate type Supplying and Fixing 150 class CS Plate type 6 inches non return valve Plate type in accordance to job scope document 30 number deepak@1181 15
22 Supply fabrication and erection of 4 inches GI PIPE LINE Supply fabrication and erection of 4 inches B class GI PIPE LINE The job involves Supply fabrication and welding of Approved make GI pipes of class B Different sizes as per sign requirement as per IS 1239 and IS 3589 Part1 Latest Edition, with ThreadedorBevelled Ends in vertical or horizontal position at all heights, on existing pedestals, including cutting, threading, bending and joining with Class B GI fitting with threadedor welded ends such as tees, bends, unions, elbows, reducers, sockets, check nuts, plug bends etc. Providing necessary GI malleable clamps for holding the pipeline on the support and testing the line as specified complete excluding painting the external surface of pipes and fitting. GI coating thickness to be complying to IS 4736. Rate to be quoted in INCH METER for the piping. Note Under the Price bid form, in the line items involving supply, fabrication and erection of pipeline, Vendor to quote rate inclusive of cost of material handling of pipeline to required height or cost of double scaffolding for pipeline handling or erection at heights 26,200 inm deepak@1181 15
23 Supply Fabrication welding of SORF150class GI 4inches GI SORF FLANGE Supply Fabrication welding of SORF150class GI 4inches GI SORF FLANGE Vendor to quote the rates for Supply Fabrication welding of SORF150 class GI on the pipelines or fittings using approved make or size of welding electrode confirming to IS 814, with three or more runs of weld on the outside or inside as required including cutting and bevelling ends as necessary or cleaning of internal or external surfaces where welding is to be done and grinding of welds etc. as directed. Clearance at various stages after site inspection is included in the above scope. Scope of work shall be for supply and welding of 150 class GI Flanges. Payment shall be made on the INCH DIA of the flange to be welded Flanges shall conform to ASME or ANSI B 16.5. In addition to job Supply, Fabrication, welding of SORF150 class GI, the job of Making flanged joints including supplying and fixing 3mm thick compressed asbestos fibre gasket conforming to IS 2712 hitensile bolts & nuts and double-washers and greasing etc is included in the scope of vendor. No additional price for gasket nuts bolts etc will be paid by BPCL in accordance to job scope document 4,000 ind deepak@1181 15
24 Supplying Fabrication welding testing and commissioning of 4inches GI 90 BAND Supplying Fabrication welding testing and commissioning of 4inches GI 90 BAND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 400 ind deepak@1181 15
25 Supplying Fabrication welding testing and commissioning of 4inches GI 45 DEGREE BeND Supplying Fabrication welding testing and commissioning of 4inches GI 45 DEGREE BeND Fabrication including cutting and edge preparation and fit up and welding and erection of GI bend on the pipeline over existing pedestals and overheads on racks and at all elevations in accordance with the job scope document 96 ind deepak@1181 15
26 Supply and making connection of 4 inches blind flanges to blind the top end of the sprinkler line Supply and making connection of 4 inches blind flanges to blind the top end of the sprinkler line in accordance to job scope document 10 number deepak@1181 15
27 Supply fabrication and erection of 3inches GI PIPE LINE Supply fabrication and erection of 3inches GI PIPE LINE The job involves Supply fabrication and welding of Approved make GI pipes of class B Different sizes as per sign requirement as per IS 1239 and IS 3589 Part1 Latest Edition, with ThreadedorBevelled Ends in vertical or horizontal position at all heights, on existing pedestals, including cutting, threading, bending and joining with Class B GI fitting with threadedor welded ends such as tees, bends, unions, elbows, reducers, sockets, check nuts, plug bends etc. Providing necessary GI malleable clamps for holding the pipeline on the support and testing the line as specified complete excluding painting the external surface of pipes and fitting. GI coating thickness to be complying to IS 4736. Rate to be quoted in INCH METER for the piping. Note Under the Price bid form, in the line items involving supply, fabrication and erection of pipeline, Vendor to quote rate inclusive of cost of material handling of pipeline to required height or cost of double scaffolding for pipeline handling or erection at heights 1,500 inm deepak@1181 15
28 Supply Fabrication and welding of SORF150 class GI 3inches SORF Supply Fabrication and welding of SORF150 class GI 3inches SORF Vendor to quote the rates for Supply Fabrication welding of SORF150 class GI on the pipelines or fittings using approved make or size of welding electrode confirming to IS 814, with three or more runs of weld on the outside or inside as required including cutting and bevelling ends as necessary or cleaning of internal or external surfaces where welding is to be done and grinding of welds etc. as directed. Clearance at various stages after site inspection is included in the above scope. Scope of work shall be for supply and welding of 150 class GI Flanges. Payment shall be made on the INCH DIA of the flange to be welded Flanges shall conform to ASME or ANSI B 16.5. In addition to job Supply, Fabrication, welding of SORF150 class GI, the job of Making flanged joints including supplying and fixing 3mm thick compressed asbestos fibre gasket conforming to IS 2712 hitensile bolts & nuts and double-washers and greasing etc is included in the scope of vendor. No additional price for gasket nuts bolts etc will be paid by BPCL in accordance to job scope document 240 ind deepak@1181 15
29 supply and fixing 1inches drain valve with 1 inch pipeline on each riser for tanks supply and fixing 1inches drain valve with 1 inch pipeline on each riser for tanks in accordance to job scope document 38 ind deepak@1181 15
30 Supply and Fixing Of Water Spray Nozzle half inches Supply and Fixing Of Water Spray Nozzle half inches in accordance to job scope document 3,000 number deepak@1181 15

Required Documents

1

Experience Criteria

2

Past Performance

3

Bidder Turnover

4

Certificate (Requested in ATC)

5

OEM Authorization Certificate

6

OEM Annual Turnover

7

Additional Doc 1 (Requested in ATC)

8

Additional Doc 2 (Requested in ATC)

9

Additional Doc 3 (Requested in ATC)

10

Additional Doc 4 (Requested in ATC)

11

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

12

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Corrigendum Updates

1 Update
#1

Update

13-Nov-2024

Extended Deadline

16-Nov-2024, 12:00 pm

Opening Date

16-Nov-2024, 12:30 pm

Technical Results

S.No Seller Item Date Status
1Bhargava Constructions   Under PMA-14-11-2024 14:58:07Disqualified
2JANTA ENGINEERS AND COMPANY   Under PMA-12-11-2024 23:23:26Disqualified
3LAKSHMI INFRA BUILDCON PRIVATE LIMITED   Under PMA-13-11-2024 08:28:18Qualified
4MONDAL ENTERPRISE   Under PMA-15-11-2024 19:09:59Qualified
5MRK ENGINEERING   Under PMA-13-11-2024 11:58:12Qualified
6RELIABLE ENGINEERING INDUSTRIES   Under PMA-13-11-2024 11:58:20Qualified
7SSV VESSELS PRIVATE LIMITED   Under PMA-12-11-2024 14:28:55Qualified
8YASHVI ENTERPRISES   Under PMA-12-11-2024 18:54:03Qualified

Financial Results

Rank Seller Price Item
L1RELIABLE ENGINEERING INDUSTRIES(MSE,MII)( MSE Social Category:General )    Under PMA₹3,62,46,210Item Categories : Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M,Dismantling of Existing FWSS Tan
L2LAKSHMI INFRA BUILDCON PRIVATE LIMITED (MSE)( MSE Social Category:General )    Under PMA₹4,15,07,384Item Categories : Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M,Dismantling of Existing FWSS Tan
L3SSV VESSELS PRIVATE LIMITED (MSE,MII)( MSE Social Category:General )    Under PMA₹4,39,67,000Item Categories : Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M,Dismantling of Existing FWSS Tan
L4YASHVI ENTERPRISES (MSE,MII)( MSE Social Category:General )    Under PMA₹4,39,89,544Item Categories : Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M,Dismantling of Existing FWSS Tan
L5MONDAL ENTERPRISE (MSE,MII)( MSE Social Category:General )    Under PMA₹4,48,45,428Item Categories : Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M,Dismantling of Existing FWSS Tan
L6MRK ENGINEERING (MSE,MII)( MSE Social Category:OBC )    Under PMA₹5,00,37,036Item Categories : Dismantling of Existing FWSS Tank 1and 2 and 3 and 4 each Dia 43 M,Dismantling of Existing FWSS Tan

Frequently Asked Questions

What are the eligibility requirements?

The eligibility requirements include being a registered entity capable of providing the necessary services and demonstrating prior experience in dismantling and installation projects like this one. Additionally, bidders must meet the minimum average annual turnover of 223 Lakh.

What certificates are required from bidders?

Bidders must provide certificates for experience, turnover, OEM authorization, and compliance with project specifications as requested in the additional terms and conditions. Failure to submit required documents may lead to disqualification.

What is the registration process for participating in this tender?

Interested bidders must register on the procurement platform, submit all necessary documentation, and ensure compliance with the eligibility criteria. Detailed guidelines for registration are included in the tender documentation.

What document formats are accepted for submission?

Bidders are typically required to submit documents in PDF format, as specified by the tender guidelines. Ensure all documentation is properly scanned and clear for review.

What are the technical specifications required for the project?

The technical specifications require adherence to industry standards for the dismantling and installation of the sprinkler system, including the use of specified materials, compliance with safety norms, and submission of quality assurance documentation.

What quality standards must bidders comply with?

All work must align with relevant quality standards specified in the tender documents. Bidders must demonstrate their capability to maintain these standards throughout the duration of the project.

Are there compliance requirements for this tender?

Yes, bidders must demonstrate compliance with safety regulations, quality standards, and any other specifications detailed in the contract terms to be eligible for consideration.

What are the criteria for testing and validation of work completed?

Testing criteria will include thorough inspections of dismantled and installed components to ascertain compliance with safety and operational standards. Documentation will be required as proof of completion and quality assurance.

What are the Earnest Money Deposit (EMD) details for this tender?

Details regarding the EMD requirements are clearly outlined in the tender documentation. Bidders must pay the EMD, ensuring their commitment and seriousness in participating.

What are the performance security requirements?

Performance security will be required to ensure contract fulfillment. Bidders must present details concerning this in their submission. The tender documents provide information on the necessary percentages and guarantee formats.

What are the payment terms associated with this tender?

Payment terms will be structured around project milestones and deliverables. Specific terms, including timelines for payment processing and conditions for release, are detailed in the tender documentation.

How will the price be evaluated in this tender?

Price evaluation will be conducted based on the total value of the submitted bids, emphasizing the overall cost-effectiveness while ensuring quality performance. Notable emphasis will be placed on financial stability and past performance records.

How can bidders submit their proposals?

Bidders must submit their proposals electronically via the tender submission portal. It is crucial to adhere to all submission guidelines to ensure that the proposal is officially accepted and considered.

What are the key timelines and deadlines?

Timelines and deadlines related to submissions, openings, and evaluations are specified in the tender documentation. Bidders should ensure adherence to these timelines to avoid disqualification.

What is the evaluation and selection process for this tender?

The evaluation and selection process will assess both the financial and technical capacities of the bids received. A committee will review the proposals based on their compliance with the criteria established in the tender document.

How will bidders be notified of the results?

Notification of results will be communicated through the procurement platform, where all participants will receive updates regarding the status of their submissions and any further instructions.

Explore More Opportunities

Quick Access
All Tenders Browse all opportunities
Categories 4 available
WELDING WIRE
APPARELS
FITMENT
ELECTRODES