GEM

Tender Notice for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in SOUTH WEST DELHI, DELHI

Bid Publish Date

02-Jul-2026, 3:16 pm

Bid End Date

13-Jul-2026, 4:00 pm

EMD

₹2,00,000

Location

SOUTH WEST DELHI , DELHI

WhatsApp Generate Docs

Progress

Issue02-Jul-2026, 3:16 pm

Corrigendum06-Jul-2026

AwardPending

Explore all 4 tabs to view complete tender details

Quantity

3805

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Hydraulically Regulated Door Closers conforming to IS 3564 (Q3) , Curtain Pipe, Sider and mounting bracket (Q4) , Tower Bolts (Non-Ferrous Metals) V2 as per IS 204 (Q2) , Brass spindle for concealed stop cock 15mm , BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE , BRASS SPINDLE FOR 15 MM BIB COCK INTERNAL FITTING DISC TYPE , BRASS SPINDLE FOR BIB COCK 20 MM INTERNAL FITTING DISC TYPE , BRASS SPINDLE FOR PILLAR COCK TAP 20 MM INTERNAL FITTING DISC TYPE , SURGICAL MIXER CP IN ONE HAND MADE , Brass Basin Mixer Legs Full Set , JET SPRAY CP BRASS WITH 1.5 M TUBE , JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 24

GeM-Bidding-9527878.pdf

Main Document

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

GeM Category Specification

GEM_CATEGORY_SPECIFICATION

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

JALPAIGURI, WEST BENGAL

Posted: 19 February 2026

Closed: 2 March 2026

GEM

Indian Army Copper Alloy Taps and Plumbing Fixtures Tender Chamoli Uttarakhand IS 8931 IS 9763 2026

Indian Army

CHAMOLI, UTTARAKHAND

Posted: 30 March 2026

Closed: 9 April 2026

GEM

Indian Army Copper Alloy Taps & Sanitary Fixtures Tender Bangalore Karnataka 2026 IS 8931 IS 2548 IS 2963

Indian Army

BANGALORE, KARNATAKA

Posted: 3 March 2026

Closed: 21 March 2026

GEM

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army

Posted: 9 March 2026

Closed: 19 March 2026

GEM

Indian Army Dept of Military Affairs Faizabad Copper Alloy Taps & Fixtures Tender 2026 IS 8931 IS 781 IS 778

Indian Army

FAIZABAD, UTTAR PRADESH

Posted: 7 March 2026

Closed: 19 March 2026

GEM

Bill of Quantities (BOQ) 18 Items Sign in to view GEM price trends Sign in for GEM prices

Brass spindle for concealed stop cock 15mm

5 nos Delivery: 30 days

BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE

252 nos Delivery: 30 days

BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE

172 nos Delivery: 30 days

BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE

58 nos Delivery: 30 days

BRASS SPINDLE FOR 15 MM BIB COCK INTERNAL FITTING DISC TYPE

206 nos Delivery: 30 days

BRASS SPINDLE FOR 15 MM BIB COCK INTERNAL FITTING DISC TYPE

59 nos Delivery: 30 days

BRASS SPINDLE FOR BIB COCK 20 MM INTERNAL FITTING DISC TYPE

26 nos Delivery: 30 days

BRASS SPINDLE FOR BIB COCK 20 MM INTERNAL FITTING DISC TYPE

8 nos Delivery: 30 days

BRASS SPINDLE FOR PILLAR COCK TAP 20 MM INTERNAL FITTING DISC TYPE

53 nos Delivery: 30 days

#10

BRASS SPINDLE FOR PILLAR COCK TAP 20 MM INTERNAL FITTING DISC TYPE

5 nos Delivery: 30 days

#11

SURGICAL MIXER CP IN ONE HAND MADE

14 nos Delivery: 30 days

#12

Brass Basin Mixer Legs Full Set

38 nos Delivery: 30 days

#13

JET SPRAY CP BRASS WITH 1.5 M TUBE

74 nos Delivery: 30 days

#14

JET SPRAY CP BRASS WITH 1.5 M TUBE

124 nos Delivery: 30 days

#15

JET SPRAY CP BRASS WITH 1.5 M TUBE

53 nos Delivery: 30 days

#16

JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE

60 nos Delivery: 30 days

#17

JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE

16 nos Delivery: 30 days

#18

JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE

20 nos Delivery: 30 days

Item #	Title	Description	Quantity	Unit	Consignee	Delivery (Days)
1	Brass spindle for concealed stop cock 15mm	Brass spindle for concealed stop cock 15mm	5	nos	bsogecentral	30
2	BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE	BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE	252	nos	bsogeeast	30
3	BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE	BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE	172	nos	bsogenorth	30
4	BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE	BRASS SPINDLE 15 MM FOR PILLAR TAPE INTERNAL FITTING DISC TYPE	58	nos	bsogecentral	30
5	BRASS SPINDLE FOR 15 MM BIB COCK INTERNAL FITTING DISC TYPE	BRASS SPINDLE FOR 15 MM BIB COCK INTERNAL FITTING DISC TYPE	206	nos	bsogeeast	30
6	BRASS SPINDLE FOR 15 MM BIB COCK INTERNAL FITTING DISC TYPE	BRASS SPINDLE FOR 15 MM BIB COCK INTERNAL FITTING DISC TYPE	59	nos	bsogecentral	30
7	BRASS SPINDLE FOR BIB COCK 20 MM INTERNAL FITTING DISC TYPE	BRASS SPINDLE FOR BIB COCK 20 MM INTERNAL FITTING DISC TYPE	26	nos	bsogeeast	30
8	BRASS SPINDLE FOR BIB COCK 20 MM INTERNAL FITTING DISC TYPE	BRASS SPINDLE FOR BIB COCK 20 MM INTERNAL FITTING DISC TYPE	8	nos	bsogecentral	30
9	BRASS SPINDLE FOR PILLAR COCK TAP 20 MM INTERNAL FITTING DISC TYPE	BRASS SPINDLE FOR PILLAR COCK TAP 20 MM INTERNAL FITTING DISC TYPE	53	nos	bsogeeast	30
10	BRASS SPINDLE FOR PILLAR COCK TAP 20 MM INTERNAL FITTING DISC TYPE	BRASS SPINDLE FOR PILLAR COCK TAP 20 MM INTERNAL FITTING DISC TYPE	5	nos	bsogecentral	30
11	SURGICAL MIXER CP IN ONE HAND MADE	SURGICAL MIXER CP IN ONE HAND MADE	14	nos	bsogeeast	30
12	Brass Basin Mixer Legs Full Set	Brass Basin Mixer Legs Full Set	38	nos	bsogenorth	30
13	JET SPRAY CP BRASS WITH 1.5 M TUBE	JET SPRAY CP BRASS WITH 1.5 M TUBE	74	nos	bsogeeast	30
14	JET SPRAY CP BRASS WITH 1.5 M TUBE	JET SPRAY CP BRASS WITH 1.5 M TUBE	124	nos	bsogenorth	30
15	JET SPRAY CP BRASS WITH 1.5 M TUBE	JET SPRAY CP BRASS WITH 1.5 M TUBE	53	nos	bsogecentral	30
16	JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE	JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE	60	nos	bsogeeast	30
17	JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE	JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE	16	nos	bsogenorth	30
18	JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE	JET SPRAY L TYPE CP WITH 1M and 1.5M TUBE	20	nos	bsogecentral	30

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Single lever wall mounted sink mixture with swivel spout
Type	Dimension	As per table 13 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Brass rods
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Cast brass
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	24

Category	Specification	Requirement
GENERIC	Conformity of IS 2564	Yes
PRODUCT CLASSIFICATION	Type of Door Closer	Bottle Type (Type A)
PRODUCT CLASSIFICATION	Door Hand Compatibility	Left-Hand Closer (For Closkwise Door)
PRODUCT CLASSIFICATION	Designation of Closers	Size 1 (For Light Doors, such as double leaved and toilet doors)
DIMENSIONS	Mass of the Door (in kg)	61 kg - 80 kg
DIMENSIONS	Width of the Door (in mm)	≤700 mm

Category	Specification	Requirement
ITEM	ITEM	Curtain Pipe
OTHER REQUIREMENTS	Sider(one pair per pipe)	Without
DIMENSON	Outside Diameter of curtain pipe (in mm)	25mm
DIMENSON	Length of curtain pipe( In Meter)	1
DIMENSON	Minimum Wall thickness of pipe ( In MM)	5 Or higher
DIMENSON	Minimum thickness of Curtain pipe hanging bracket (in mm)	2, 3 Or higher

Category	Specification	Requirement
Generic	Governing Specification	As per IS 204
Generic	BIS Marked	Yes
Generic	Type of tower bolts as per Cl 3.1 of IS 204	Barrel Tower Bolts
Generic	Sub-type of tower bolts as per Cl 3.1 of IS 204	Aluminium Alloy Barrel Tower Bolts (Type - 4A)
MATERIAL	Material of Aluminium alloy tubes as per Table 3 of IS 204( Part 2)	designation 63400 WP or 63400 P of IS 1285
MATERIAL	Material of Aluminium alloy extruded rods as per Table 3 of IS 204( Part 2)	Designation 65032 WP of IS 733
MATERIAL	Brass sheets as per Table 3 of IS 204( Part 2)	Alloy designation CuZn 40 Condition HD of IS 410
MATERIAL	Cast brass as per Table 3 of IS 204( Part 2)	Grade CB.2 of IS 292
MATERIAL	Extruded brass as per Table 3 of IS 204( Part 2)	Type II Half hard condition of IS 319
MATERIAL	Zinc base alloy die casting as per Table 3 of IS 204 (Part 2)	Alloy Zn A14 Die casting of IS 742
Constructional	Fixing of knob with Bolt as per Cl 5.1.1 of IS 204(Part 2)	Integrated with Bolt
Constructional	Barrel tower bolts should comply as per Cl 5.2.1 of IS 204 (Part 2) (choose NA for skeleton tower bolts)	Yes
Constructional	Skeleton tower bolts should comply as per Cl 5.2.2 of IS 204 (Part 2) (choose NA for Barrel tower bolts)	NA
DIMENSIONS	Length of Bolt/Barrel of Barrel Tower bolts as per Table 1 of IS 204 (Part 2) (mm)	250
DIMENSIONS	Diameter of Barrel and Skeleton Tower bolts (mm)	12.0
DIMENSIONS	Width of Barrel Tower bolts (mm)	38
DIMENSIONS	Minimum No. of equally spaced screw holes in barrel and sockets for wood screw for Barrel tower bolts	10
DIMENSIONS	Length of socket as per Table 1 of IS 204 (Part 2)	25
DIMENSIONS	Thickness of Brass or Zinc Alloy Metal of Barrel as per Table 1 of IS 204 (Part2)	2
DIMENSIONS	Thickness of Aluminium Alloy Metal of Barrel as per Table 1 of IS 204 (Part2)	2.4
DIMENSIONS	Thickness of Sheet brass Metal of Barrel as per Table 1 of IS 204 (Part2)	1-1.25
DIMENSIONS	Length of Bolt/Barrel of Skeleton tower bolts as per Table 2 of IS 204 (Part 2) (mm)	NA
DIMENSIONS	Width of Bolt plate or staple of Skeleton tower bolts (mm)	NA
DIMENSIONS	Minimum No. of screw holes for wood screw no. 4 in Skeleton tower bolts	NA
DIMENSIONS	Length of Staple in Skeleton tower bolts as per Table 2 of IS 204 (Part 2)	NA
DIMENSIONS	Thickness of Brass Plate or socket in Skeleton tower bolts as per Table 2 of IS 204 (Part2)	NA
DIMENSIONS	Thickness of Aluminium Alloy or Zinc alloy Plate or Socket of Skeleton tower bolts as per Table 2 of IS 204 (Part2)	NA
DIMENSIONS	No of Staples in Skeleton tower bolts as per Table 2 of IS 204 (Part 2)	NA
Marking and Packing	Packing of Barrel tower bolt shall be as per IS 8.1 of IS 204 (Part 2) (Choose NA for Skeleton tower bolts)	Yes
Marking and Packing	Packing of Skeleton tower bolt shall be as per IS 8.2 of IS 204 (Part 2) (Choose NA for Barrel tower bolt)	NA
TEST REPORT	Avaibility of Test Report from the list of approved laboratory for Tower Bolts (Non-Ferrous Metals) as per IS: 204, latest	No
TEST REPORT	Test reports to be furnished to buyer on demand	Yes

Browse Tenders

Categories

States

Cities

Authorities

Tender Notice for Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform in SOUTH WEST DELHI, DELHI

Categories 22

Additional Tender Data

Commercial Details

Authority Records

BID & GeM Expert Consultancy

Documents 24

GeM-Bidding-9527878.pdf

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

GeM Category Specification

BOQ Document

BOQ Document

GEM General Terms and Conditions Document

Past Similar Tenders (Historical Results)

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army Copper Alloy Taps and Plumbing Fixtures Tender Chamoli Uttarakhand IS 8931 IS 9763 2026

Indian Army Copper Alloy Taps & Sanitary Fixtures Tender Bangalore Karnataka 2026 IS 8931 IS 2548 IS 2963

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army Dept of Military Affairs Faizabad Copper Alloy Taps & Fixtures Tender 2026 IS 8931 IS 781 IS 778

Bill of Quantities (BOQ) 18 Items Sign in to view GEM price trends Sign in for GEM prices

Technical Specifications 20 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Item #15 Details

Item #16 Details

Item #17 Details

Item #18 Details

Item #19 Details

Item #20 Details

🤖 AI-Powered Bidder Prediction

Required Documents

Corrigendum Updates

Update

Similar Tenders

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Indian Army Department Of Military Affairs Copper Alloy Taps & Bathroom Fixtures Tender 2026 IS Standards 8931/9763

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931,Copper alloy Taps/Stop Valves (V2) Conform

Explore More Opportunities

Unlock Tender Documents

Documents 24

GeM-Bidding-9527878.pdf

GeM Category Specification

GeM Category Specification