TenderDekho Logo
Closed GEM

Armed Forces Tribunal Security Equipment Tender Kinnaur Himachal Pradesh 2026 ISI/Manufacturer Authorization Eligible

Bid Publish Date

10-Aug-2026, 8:59 pm

Bid End Date

21-Aug-2026, 9:00 pm

Location

KINNAUR , HIMACHAL PRADESH
Generate Docs

Progress

Issue10-Aug-2026, 8:59 pm
Technical21-08-2026 08:37:58
Financial
AwardCompleted

Tender Overview

The Armed Forces Tribunal (Department of Defence) in Kinnaur, Himachal Pradesh is inviting bids for a broad procurement across multiple line items (129 total items in the BOQ). The tender covers varied security equipment or related products, with delivery and installation at a buyer-designated site in Kinnaur and nearby locations as per discretion. The scope includes equipment availability, data sheet submission, OEM authorization, and post-supply support. Notably, the bid emphasizes non-obsolescence and a minimum residual market life of 6 years, and allows a potential quantity adjustment up to 50% during contract execution. A data sheet alignment check and OEM-certified installation are required, underscoring the government-grade compliance expectations. The absence of explicit product specifications suggests bidders must rely on the provided data sheet and OEM confirmations to demonstrate conformity, while ensuring timely installation and commissioning where applicable.

Technical Specifications & Requirements

  • Data Sheet of offered products must be uploaded and matched with bid parameters.
  • Installation, commissioning, testing, configuration, and training to be performed by OEM or OEM-certified resources.
  • Experience: bidder or OEM (direct or through resellers) must have supplied similar category products to Central/State Government or PSUs for at least 3 years prior to bid opening.
  • Manufacturer Authorization: OEM or authorized service provider must furnish authorization with detailed contact info.
  • Option Clause: quantity may vary by up to 50% at contract award and during currency.
  • Addresses for delivery/installation are at various locations per buyer discretion; no fixed single site is stated.

Terms, Conditions & Eligibility

  • Data Sheet submission mandatory; mismatch can lead to bid rejection.
  • GST: bidder responsible for applicable GST; reimbursement as per actuals or lower quoted rate.
  • Documents required: PAN, GSTIN, cancelled cheque, EFT mandate, and other vendor-code creation documents.
  • Experience: minimum 3 years in government-style procurement for similar products; provide contracts showing yearly quantities.
  • Installation/commissioning to be done by OEM-certified personnel; ensure OEM authorization is provided.
  • 50% quantity increase/decrease and currency-based adjustments allowed per contract terms.

Key Specifications

    • 129 total items in BOQ (no individual item specs provided in tender data)
    • Delivery/installation location: G BRALAM/Nearby Locations as per buyer discretion (Bargiok, OP Hill, Kaurik, Shipkila, Lacuma II, Lepcha)
    • Installation & commissioning to be carried out by OEM or OEM-certified resource
    • Data Sheet alignment required; mismatch may lead to bid rejection
    • Experience: minimum 3 years supplying similar category products to Central/State Govt/PSU

Terms & Conditions

  • EMD: Not disclosed in provided data; bid validity unspecified

  • Delivery: address specified as per buyer discretion; flexibility in quantity (up to 50%)

  • GST: bidder bears GST; reimbursement policy based on actuals or quoted rate

Important Clauses

Payment Terms

GST applicability to be borne by bidder; reimbursement as per actuals or lower of quoted GST rate

Delivery Schedule

Delivery and installation to be completed at multiple sites per buyer discretion; no fixed single site

Penalties/Liquidated Damages

No explicit LD figures provided in text; contract allows 50% quantity variation and potential delays per terms

Bidder Eligibility

  • 3 years of government procurement experience in similar product category

  • Manufacturer Authorization or OEM authorization available

  • Financial stability via GST and PAN documentation, EFT mandate

Authority & Contact

Organization

Armed Forces Tribunal

Department

Department of Defence

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Technical Results

S.No Seller Item Date Status
1
A. Y. INDUSTRIES   Under PMA
-21-08-2026 08:37:58
2
FAIR DEAL TRADERS   Under PMA
-20-08-2026 22:57:41
3
GS Innovations   Under PMA
-20-08-2026 16:47:47
4
PLASTECO POLYTECH PRIVATE LIMITED   Under PMA
-20-08-2026 17:48:21
5
Triveni Sales Corporation   Under PMA
-20-08-2026 17:30:56
6
UNIFAB DEFENCE PRIVATE LIMITED   Under PMA
-21-08-2026 13:57:08
7
UNIVERSAL FABRICATORS   Under PMA
-20-08-2026 23:18:35

Financial Results

Rank Seller Price Item
L1
A. Y. INDUSTRIES( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L2
FAIR DEAL TRADERS( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L3
UNIVERSAL FABRICATORS( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L4
PLASTECO POLYTECH PRIVATE LIMITED( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,
L5
UNIFAB DEFENCE PRIVATE LIMITED( MSE Social Category:General )    Under PMA
Item Categories : Cement bags 50 Kgs,Sand Coarse,Crushed stone aggregate 20mm,TMT Steel bar 8 mm,TMT Steel bar 10 mm,

Tender Data

Bid Details

Quantity

308890

Category

Sand Coarse

Bid Type

Two Packet Bid

Bid Validity

180 (Days)

Bid Type

Service

Evaluation

Total value wise evaluation

Inspection Required

No

Tech Clarification Time

2 Days

Preference & Exemptions

EMD Required

No

MSE Exemption/Relaxation

No

Startup Exemption/Relaxation

No

Bid Splitting Applied

No

Requirements

Past Performance

50 %

Warranty Period

10 days

Arbitration Clause

No

Mediation Clause

No

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

No

Bid To RA Enabled

No

Advisory Bank

State Bank of India

ePBG Percentage

5%

ePBG Duration (Months)

12

Pre-Bid & Qualification

Pre-Bid Date

15-08-2026 10:00:00

Pre-Bid Venue

ENGINEER PLANNING OFFICER 426(I) FD COY MOB:- 9971419277 KARCHAM

Delivery Details

Max Delivery Days

120

Delivery Locations

1

Delivery Cities

Kinnaur

Delivery Locations

ConsigneeAddressCityStatePincodeQuantityDelivery DaysAdditional Requirement
-KinnaurKinnaur--18837120-

Authority Records

MINISTRY OF DEFENCEDEFENCE DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 4

GeM-Bidding-9727824.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Bill of Quantities (BOQ) 129 Items Sign in for GEM prices

#1

Cement bags 50 Kgs

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

18,837 nos Delivery: 120 days
#2

Sand Coarse

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,104 cum Delivery: 120 days
#3

Crushed stone aggregate 20mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,162 cum Delivery: 120 days
#4

TMT Steel bar 8 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

11,868 kg Delivery: 120 days
#5

TMT Steel bar 10 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

29,371 kg Delivery: 120 days
#6

TMT Steel bar 12 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

111,067 kg Delivery: 120 days
#7

TMT Steel bar 16 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

4,876 kg Delivery: 120 days
#8

APP based polymeric membrane

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,760 sqm Delivery: 120 days
#9

Scantling 3 INCH x 3 INCH seasoned first class hard wood 2 POINT 30 mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,150 nos Delivery: 120 days
#10

75mm dia PVC pipe

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,357 rm Delivery: 120 days
#11

Shuttering Plywood 12mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

5,060 sqm Delivery: 120 days
#12

Binding Wire 20 gauge 0 POINT 9mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

460 kg Delivery: 120 days
#13

Nails 2 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

115 kg Delivery: 120 days
#14

Nails 3 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

115 kg Delivery: 120 days
#15

Nails 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

115 kg Delivery: 120 days
#16

Water Proofing Compound

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

25,875 kg Delivery: 120 days
#17

Quick Setting Compound

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

1,610 nos Delivery: 120 days
#18

Bitumen

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,070 kg Delivery: 120 days
#19

10mm thick MS Plate

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

49,128 kg Delivery: 120 days
#20

Shredded Rubber 150 mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

552 sqm Delivery: 120 days
#21

25mm thick Ballestic Panel

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

552 sqm Delivery: 120 days
#22

Lime

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 kg Delivery: 120 days
#23

Primer for Synthetic Paint

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

690 ltr Delivery: 120 days
#24

Synthetic Enamel Paint Light brown shade

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

276 ltr Delivery: 120 days
#25

Synthetic Enamel Paint Medium brown shade

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

506 ltr Delivery: 120 days
#26

Synthetic Enamel Paint Dark brown shade

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

322 ltr Delivery: 120 days
#27

Anti rust Paint

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

828 ltr Delivery: 120 days
#28

Paint Brush

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

161 nos Delivery: 120 days
#29

Welding Rod 3 POINT 6mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

5,750 pkt Delivery: 120 days
#30

MS Door of size 1200 x 2100mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#31

PVC Door

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#32

Geotextile

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

4,830 sqm Delivery: 120 days
#33

Lightening Conductor

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 set Delivery: 120 days
#34

Rifle Racks

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#35

Fire Extinguisher

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#36

Oxygen Cylinder kit with trolley

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#37

Tarpaulin

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

92 nos Delivery: 120 days
#38

Sleeping Bed

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

115 nos Delivery: 120 days
#39

Mattress

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#40

Aluminium Cable for welding machine 2 Core 10 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,300 mtr Delivery: 120 days
#41

Portable 2 POINT 5 KVA Solar System

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#42

LED tube light fiting

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#43

Swich Socket 5 Amp

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

92 nos Delivery: 120 days
#44

Switch socket combination 5 BY15 Amp

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#45

PVC Switch Board 8 INCH x 10 INCH

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#46

PVC Switch Board 6 INCH x 4 INCH

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#47

PVC Casing and Capping of size 25 mm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

690 rm Delivery: 120 days
#48

PVC Casing Capping Tee bend

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#49

PVC Casing capping L bend

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#50

PVC Square box 4 INCH x 4 INCH

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#51

Elect wire single core Copper Conductor 1 POINT 5 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

4,600 rm Delivery: 120 days
#52

Elect wire single core Copper Conductor 2 POINT 5 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

3,450 rm Delivery: 120 days
#53

Elect wire two core 6 Sqmm

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

2,300 rm Delivery: 120 days
#54

MCB Box 6 way SPN

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#55

MCB 10 TO 32 Amp SP

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#56

Change over switch 63 Amp 3 phase four pole

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#57

Tape Insulation HALF INCH x 15 Mtr

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#58

Ceiling Rose

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

92 nos Delivery: 120 days
#59

Inline OR Mix Flow Exhaust fan with all fittings AND ducting items

ELECTRIC ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#60

Stainless Steel IWC wash down water closet pan

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#61

Stainless Steel wash hand basin

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#62

Angle valve 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#63

Bib cock 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#64

Pillar cock 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#65

Stop cock 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#66

Stainless steel grating with hole 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#67

Stainless steel grating without hole 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#68

Floor Trap 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#69

PVC Pipe 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

345 rm Delivery: 120 days
#70

PVC Pipe 110mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 rm Delivery: 120 days
#71

PVC P Trap 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#72

PVC Connection 600mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#73

PVC short connection pipe 110mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#74

PVC bend with oval access door 110mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#75

PVC plain bend 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#76

PVC T 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#77

PVC Socket 110mm dia

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

92 nos Delivery: 120 days
#78

PVC Socket 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#79

PVC Bend 75mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#80

PPR Pipe 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

920 rm Delivery: 120 days
#81

PPR Pipe 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

920 nos Delivery: 120 days
#82

PUF Insulated FRP water tank capacity 1000 Ltrs

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#83

PPR Gate valve of 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#84

PPR Elbow 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

115 nos Delivery: 120 days
#85

PPR Tank connector inner dia 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#86

PPR Reducer 32 x 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

115 nos Delivery: 120 days
#87

PPR Tee reducer 32 x 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

138 nos Delivery: 120 days
#88

PPR Elbow 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#89

PPR Socket 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#90

PPR Union 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

138 nos Delivery: 120 days
#91

PPR Tee 32mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

138 nos Delivery: 120 days
#92

PPR Tee 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#93

PPR Socket 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#94

PPR Union inner dia 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

138 nos Delivery: 120 days
#95

PPR Wall Clamp dia 25mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

460 nos Delivery: 120 days
#96

PPR Wall Clamp dia 15mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

690 nos Delivery: 120 days
#97

PPR Brass Elbow 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#98

PPR Brass Socket 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#99

PPR Brass FTA 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#100

PPR Brass MTA 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#101

SS Nipple 15mm x 25 mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#102

PPR Tee Brass 20mm

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#103

Readymade Septic Tank for Toilet 2000 Ltr

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#104

Taflon Tape

PPR ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#105

Cut off machine 14 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#106

ESAB Arc 200I

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#107

Durmut 5 Kg

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#108

Hand Gloves Rubber Best quality

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

184 nos Delivery: 120 days
#109

Pan Motor 18 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

115 nos Delivery: 120 days
#110

Phawrah with handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

138 nos Delivery: 120 days
#111

Measuring Tape 03 mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#112

Wiremess for Seiving Sand 01 Mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 roll Delivery: 120 days
#113

Axes Picks 03 Kg head with handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

92 nos Delivery: 120 days
#114

Crow Bar Hexagonal 1200mm Long x 40mm

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#115

Gumboot Various size

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

138 pairs Delivery: 120 days
#116

Spirit Level 10 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#117

Nylon Mason Thread 100 mtr

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 roll Delivery: 120 days
#118

Plumbob Steel with Lasing

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#119

Water Level Pipe

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 mtr Delivery: 120 days
#120

Hammer 10 Kg with handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#121

TMT Bar Bending frame

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#122

TMT Rod Bending Handle

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

23 nos Delivery: 120 days
#123

Wooden Gurmala of size 8 INCH x 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#124

Aluminium Study of size 3 INCH x 2 INCH and 6 FEET

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#125

Steel Gurmala of size 8 INCH x 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

46 nos Delivery: 120 days
#126

Steel Bucket 15 Ltr Capacity

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

69 nos Delivery: 120 days
#127

Iron Cutter Blade 14 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days
#128

Iron Cutter Blade 4 INCH

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

299 nos Delivery: 120 days
#129

Hexa Blade double side

STORE LIST ITEMS TO BE SUPPLIED AS PER TECHNICAL SPECIFICATIONS MENTIONED IN PDF DOCUMENT

230 nos Delivery: 120 days

Categories 145

AGITATORS SPECTROSCOPIC EQUIPMENT BITUMINOUS MATERIAL DISTRIBUTOR PVC PIPE PRINTING SERVICES PLATFORM SCALE SLUICE VALVE ANGLE PASTRIES STEAM IRON FERROUS ELECTRODE MISCELLANEOUS VALVE PAINTING ANGLE GLOBE VALVES COPPER CABLE STRUCTURE FABRICATION WELDING MACHINE PARTS POWER CABLE PTFE WIRE AIR CYLINDERS TUBE AND FITTING GRATING AIR COOLED ENGINE DESERT COOLER ELECTRICAL PRODUCTS WIRING ASSEMBLY WELDING FLUX WELDING ELECTRODE COMPRESSOR KITS OFFSET PRINTING STEEL FURNITURE ARC VALVE COMPRESSED BOARD HARDWARE AND FASTENERS AXES GEYSER LOADER TONGUE WIRE BLADE FAULT ANALYSIS FERROUS ALLOY SUPPLY WOODEN BOARD DISTEMPER WOODEN PRODUCT DISCRETE COMPONENTS XLPE CABLE PETROLEUM PRODUCT DESIGN DEVELOPMENT ELBOW AMPOULE FILLING EQUIPMENT HYDRAULIC SHOVEL WOOD SUPPLY GI WIRE ELECTRICAL BOXES FIRE EXTINGUISHERS MILITARY VEHICLE BED PREPARATION OF DOCUMENT WELDING MACHINE PANEL CONDUCTOR SOCKET PAINT SUPPLY WATER TANK ELECTRIC ROPE SHOVEL MS WIRE AIR EXHAUSTER PAPER AND PRINTING SERVICES HIGH TENSION PANEL LED LUMINARIES COILED CABLE WOODEN PLANK HANDY FOGGER SWITCH GEAR FLUID MECHANICS EQUIPMENT TUBE LIGHT WELDING WIRE CEMENT FITMENT LFH CABLE SEPTIC TANK BUCKET WOODEN FURNITURE FALL PROTECTION LANYARD BARE METAL AIR BLOWER SKILLED PERSONNEL WELDING TOOL PLY WOOD FORESTRY PRODUCTS AWM WIRE BLOCKPRINTING PRINTMAKING PAPER GL WIRE CHANGE OVER SWITCH VALVES CUT OFF MACHINE RCC WORK WELDING ROD POWER WIRE GATE VALVES TUBE BOX VALVE MATTRESS WATER SUPPLY MATERIAL WELDING GENERATOR ENAMELING PAINTS AND ACCESSORIES TARPAULIN WIRE FILTER RETAINERS TROLLEY ERECTION OF STRUCTURAL CUTTER PLYWOOD TURBINE PUMPS ARC WELDING SLIDER VALVES PAINTS AND PRIMERS RESUSCITATION KIT WELDING TIP DUCTING ANGLE COCK TRANSITION METALS BOILER MOUNTING VALVE CABLE STAINLESS STEEL PRODUCT FABRICATOR WATER TRANSMISSION MACHINE GAUGE AUTOMOTIVE CABLE MEDICAL GAS BOILER VALVE FIRST AID BOX PEB UPVC PIPE PAINTS FAN METAL PRODUCTS BAR TEE LIME TMT MANUFACTURING SERVICES PAINTING MATERIAL

Frequently Asked Questions

Key insights about HIMACHAL PRADESH tender market

How to bid for Armed Forces Tribunal tender in Kinnaur Himachal Pradesh 2026?

Bidders must submit GSTIN, PAN, cancelled cheque, EFT mandate, data sheets, and OEM authorization. Ensure 3 years govt procurement experience and OEM-certified installation capability. The bid requires alignment of data sheets with product specs and adherence to delivery at buyer-discretion locations in Kinnaur.

What documents are required for government security equipment bids in Himachal Pradesh?

Essential documents include PAN, GST certificate, cancelled cheque, EFT mandate, data sheets, OEM authorization, and prior contract copies proving 3 years of govt supply. These ensure vendor-code creation and verification of technical parameters against offered products.

What are the technical specifications expected for security equipment tender in Kinnaur?

No explicit item specs are provided; bidders must rely on the Data Sheet uploaded with the bid. Ensure data sheet alignment, specify product performance, certifications, and confirm OEM installation capability to meet govt standards.

What are the payment terms and GST handling for this defence tender in HP?

GST is the bidder’s responsibility; reimbursement is determined by actuals or the lower of the quoted GST rate. Payment terms are subject to contract rules; ensure GST compliance and submit accurate GSTIN along with bid.

How is quantity variation managed in this Armed Forces Tribunal tender?

The purchaser reserves the right to increase or decrease the quantity up to 50% of the bid quantity at contract placement and during currency, at contracted rates. Plan inventories accordingly and verify availability with OEMs.

What installation requirements are specified for this government bid in Himachal?

Installation and commissioning must be performed by the OEM or OEM-certified resources, with OEM authorization forms submitted. Ensure technicians are trained for configuration and testing as per the product data sheets.

What is the minimum government experience required for bidders in this tender?

Bidders must have supplied same or similar category products to Central/State Government or PSUs for at least 3 years prior to bid opening, with contracts showing annual quantities and performance.

Where can bidder data sheets and OEM authorizations be verified for this tender?

Data sheets must be uploaded with the bid and matched to product parameters. OEM authorizations should include name, designation, address, email, and phone number to verify authenticity and ensure installation capability.

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

 View All