Active GEM

Bids are Invited For Decorative Laminate Sheet,Free standing PARTITION PANEL,Signage Board (V4),Audio Digital Signal Pro in LUCKNOW, UTTAR PRADESH

Bid Publish Date

31-Aug-2026, 5:44 pm

Bid End Date

10-Sep-2026, 1:00 pm

EMD

₹2,10,000

Value

₹70,00,000

Location

LUCKNOW , UTTAR PRADESH

WhatsApp Generate Docs

Progress

Issue31-Aug-2026, 5:44 pm

AwardPending

A tender has been published for N/a Decorative Laminate Sheet (Q3), Free standing PARTITION PANEL (Q3), Signage Board (V4) (Q3), Audio Digital Signal Processor (Q3), Almirah or Cabinets (Handicraft) (V2) (Q3) in LUCKNOW, UTTAR PRADESH. Quantity: 3063 by. Submission Deadline: 10-09-2026 13: 00: 00. Check eligibility and apply.

Tender Data

Bid Details

Quantity

3063

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

MSE Purchase Preference

MSE Exemption/Relaxation

Startup Exemption/Relaxation

Bid Splitting Applied

Requirements

Min. Avg. Annual Turnover

OEM Avg. Turnover

Past Performance

20 %

Experience Required

3 Year (s)

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Item Category

Decorative Laminate Sheet (Q3) , Free standing PARTITION PANEL (Q3) , Signage Board (V4) (Q3) , Audio Digital Signal Processor (Q3) , Almirah or Cabinets (Handicraft) (V2) (Q3)

Advisory Bank

State Bank of India

ePBG Percentage

ePBG Duration (Months)

Payment Timelines

Payments shall be made to the Seller within 10 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Lucknow

Delivery Pincodes

226010

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
Jai Pal	226010,Vibhuti Khand, Gomti Nagar	Lucknow	Uttar Pradesh	226010	876	90	-

Authority Records

AGRICULTURE EDUCATION AND RESEARCH DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 9

GeM-Bidding-9757852.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Authority & Contact

Organization

N/a

Department

Agriculture Education and Research Department Uttar Pradesh

Office Name

226010

Grievance Contact

[email protected]

Categories 9

SIGNAGE EEG MACHINE PANEL MICROPROCESSORS AUDIO EQUIPMENT ALMIRAH CENTRAL PROCESSING UNIT DOPPLER MACHINE ELECTRONIC SIGNAL

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI

Historical Data

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC)

Additional Doc 2 (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Specifications 5 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Generic	Bonding Material of Core and Backer Layer	Phenolic Resin, Amino plastic Resin, Both Phenolic and Amino plastic Resin
Material Type and Classification	Material Type	Compact S Type (Compact Standard Type Decorative Laminated Sheet), Compact F Type (Compact Decorative Laminated Sheet having Defined Reaction to Fire), S Type (Standard Type Decorative Laminated Sheet), P Type (Postformable Decorative Laminated Sheet), F Type (Decorative Laminated Sheet having Defined Reaction to Fire)
Material Type and Classification	Alphabetical Classification	CGS (Compact General Purpose Standard), CGF (Compact General Purpose Flame Retardant), HDS (Horizontal Heavy Duty Standard), HDF (Horizontal Heavy Duty Flame Retardant), HGS (Horizontal General Purpose Standard), HGF (Horizontal General Purpose Fire Retardant), HGP (Horizontal General Purpose Post Forming), VGS (Vertical General Purpose Standard), VGF (Vertical General Purpose Standard Flame Retardant), VGP (Vertical General Purpose Post Forming), VLS (Vertical Light Duty Standard)
Properties	Resistance to Wear (Number of Revolution = R) Wear resistance is the ability of a material to resist the progressive loss of volume from its surface through mechanical actions such as repeated rubbing, sliding, or scraping	1 (Initial Wear Point (IP) 0, Initial Wear Point (IP)+Final Wear Point (FP)≥50), 2 (Initial Wear Point (IP)≥50, Initial Wear Point (IP)+Final Wear Point (FP)≥150), 3 (Initial Wear Point (IP)≥150, Initial Wear Point (IP)+Final Wear Point (FP)≥350), 4 (Initial Wear Point (IP)≥350, Initial Wear Point (IP)+Final Wear Point (FP)≥1000)
Properties	Resistance to Impact (Newton = N) Resistance to Impact by Small Diameter Ball, Impact resistance is the ability of a material to resist permanent deformation caused by high force or shock applied to it over an extremely short period of time	2 (Spring Force ≥15 N), 3 (Spring Force ≥20 N)
Properties	Resistance to Scratching (Newton = N) Scratch hardness refers to the hardness of a material in terms of resistance to scratches and abrasion by a harder material forcefully drawn over its surface	1 (Load ≥1.50 N), 2 (Spring Force ≥1.75 N), 3 (Spring Force ≥2.00 N), 4 (Spring Force ≥3.00 N)
Dimensions	Length of the Decorative Laminate Sheet in mm	1800 mm, 2400 mm, 2700 mm, 3000 mm, Non Std. Size
Dimensions	Width of the Decorative Laminate Sheet in mm	900 mm, 1200 mm, 1500 mm, Non Std. Size
Dimensions	Thickness of the Decorative Laminate Sheet in mm	0.4 mm, 0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 1.0 mm, 1.2 mm, 1,5 mm, 2.0 mm, Non Std. Size
Colours and Finishes	Surface Finish	Glossy, Matt, High Glossy

Item #2 Details

View Catalog

Category	Specification	Requirement
GENERIC	Panel thickness	52.4 mm (having cable management facility), 22.8 mm (no cable management ability)
GENERIC	Panel structure Hint : Panels are supported on legs with levellers at various locations (depending on the layout requirements)	For 52.4 mm – 2 nos. Vertical trim + Horizontal trims (at every division of blocks/tiles) + Blocks (for intermediate panels) + 1 no. of fabricated bottom frame (welded structure) + bottom tiles + top tiles + 1 no. of top trim, For 22.8 mm – 2 nos. Vertical trim + Horizontal trims (at every division of blocks/tiles) + Blocks (Intermediate/Top/Bottom) + 1 no. of top trim + 1 no. of end trim + 1 no. of end trim’s cap
MATERIAL	Blocks made out of	Composite construction of MDF and paper honeycomb, Particle board with laminate – (Laminate Block- 38 mm Honeycomb+ 3 mm MDF both side + 0.6 Laminate), Particle board with fabric (Fabric Block- 38 mm Honeycomb+ 3 mm MDF both side + 0.6 Fabric)
MATERIAL	Brackets made of	Full gable end bracket made from 1.2 mm thick MS CRCA grade D conforming to IS 513, Work surface bracket and Holder bracket made from 2 mm thick CRCA grade D steel conforming to IS 513 - 19
MATERIAL	Bracket sizes/width	450 mm, 600 mm, 750 mm
MATERIAL	Panel legs (single side) size for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : select ‘NA’ if single side panel legs (for 52[dot]4 mm panel thickness) not required	340 mm, 490 mm, 640 mm, N.A
MATERIAL	Panel legs (double side) size for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : select ‘NA’ if double side panel legs (for 52[dot]4 mm panel thickness) not required	655 mm, 805 mm, 955 mm, 1105 mm, 1255 mm, N.A
MATERIAL	Panel legs (double side) size for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : select ‘NA’ if double side panel legs (for 22[dot]8 mm panel thickness) not required	650 mm, 800 mm, 950 mm, 1100 mm, 1250 mm, N.A
PANEL COMPONENTS	Blocks for 52[dot]4 mm panel thickness Hint : these blocks are located in mid segment of the panels and can be provided with cut outs for mounting switch boxes (above or below the work tops)	Comprises of 38 mm thick paper honeycomb + 3 mm MDF on each sides + 0.6 mm decorative laminate on both sides – Particle board framing used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables, Comprises of 38 mm thick paper honeycomb + 3 mm MDF on each sides + 0.6 mm fabric on both sides – Particle board framing used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables, N.A
PANEL COMPONENTS	Top tiles finish for 52[dot]4 mm panel thickness Hint : These tiles are slide in to the panels from top before fixing the top horizontal and supported from top and bottom side with clips fitted in horizontal extrusion	Fabric magnetic tiles (fabric upholstered metal tiles in 0.6 mm thick G.I Grade O conforming to IS 277), Fabric tack tiles (fabric upholstered metal tiles in 0.6 mm thick G.I Grade O conforming to IS 277 with P.E foam in the tile), Plain metal tiles (0.6 mm thick MS CRCA Grade D Conforming to IS 513 powder coated with Epoxy – polyester finish), Laminated tiles (9 mm to 9.5 mm thick pre-laminated particle board conforming to IS 12823 having all its edges with minimum 0.5 mm thick PVC edging), Post laminated tiles (8 mm thick pre-laminated particle board conforming to IS 12823 laminated with 0.6 mm thick high pressure laminate on outer side and 0.6 mm backing laminate on inner surface and having all its edges with minimum 0.5 mm thick PVC edging), White board tiles (8 mm thick pre-laminated particle board conforming to IS 12823 laminated with 0.6 mm thick white glossy high pressure laminate on outer side and 0.6 mm backing laminate on inner surface and having all its edges with minimum 0.5 mm thick PVC edging), Glass tiles (4 mm thick toughened clear glass fitted on both sides of panel using vertical and horizontal stiffners of 6 mm powder coated CRCA steel grade D conforming to IS 513), N.A
PANEL COMPONENTS	Height of Top tiles for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	260 mm (for panel height of 3 feet, 4 feet and 5 feet), 375 mm (for panel height of 3.5 feet), 415 mm (for panel height of 4.5 feet), N.A
PANEL COMPONENTS	Width of Top tiles for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A
PANEL COMPONENTS	Split Top tiles for 52[dot]4 mm and 22[dot]8 mm panel thickness Hint : For two different finishes in single panels	Available, Not available
PANEL COMPONENTS	Height of Split top tiles for 52[dot]4 mm and 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes (according to panel height) are including the fabric or edge banding thickness if applicable	260 mm (for panel height of 3 feet, 4 feet and 5 feet), 375 mm (for panel height of 3.5 feet), 415 mm (for panel height of 4.5 feet), N.A
PANEL COMPONENTS	Width of Split top tiles for 52[dot]4 mm and 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	290 mm, 440 mm, 590 mm, 740 mm, 890 mm, 1040 mm, 1190 mm, 1340 mm, 1490 mm, N.A
PANEL COMPONENTS	Bottom tiles finish for 52[dot]4 mm panel thickness Hint : Bottom tiles are press fitted on to the assembly frame of the panel with the help of snap on clips – Switches can be mounted on these bottom tiles as per buyer’s requirement	Fabric magnetic tiles, Plain metal tiles, Laminated tiles, Post-laminated tiles, N.A
PANEL COMPONENTS	Width of Bottom tiles for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	280 mm, 430 mm, 580 mm, 730 mm, 880 mm, 1030 mm, 1180 mm, 1330 mm, 1480 mm, 1630 mm, 1780 mm, N.A
PANEL COMPONENTS	Bottom Blocks for 22[dot]8 mm panel thickness	Fabric finish (made from 18 mm thick PPB/PLB upholstered with fabric using adhesives), Metal finish (made from two components of 0.8 mm thick M.S. CRCA Grade D conforming to IS 513 powder coated with epoxy polyester finish), Laminate finish (made from 18 mm thick particle board), N.A
PANEL COMPONENTS	Width of Bottom Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A
PANEL COMPONENTS	Width of Intermediate Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A
PANEL COMPONENTS	Top Blocks for 22[dot]8 mm panel thickness	Fabric finish (made from 18 mm thick PPB/PLB upholstered with fabric using adhesives), Laminate finish (made from 18 mm thick particle board), White board finish (made of 16 mm thick particle board laminated with 0.6 mm thick white glossy high pressure laminate on both sides and having all its edges with minimum 0.5 mm thick PVC edging), Fabric metal finish (made of two metal tiles of 0.6 mm G.I grade O conforming to IS 277 and fabric is upholsterd using synthetic thermoplastics pressure sensitive hot melt adhesive), Tackable finish (made from 18 mm thick PLB battens which hold 3 mm MDF in between and 6 mm thick PE foam pasted on 3 mm thick MDF and upholstered with fabric on both sides using adhesive), Glass finish (made of 4 mm thick toughened plain glass having diamond polish edge finish), N.A
PANEL COMPONENTS	Height of Top Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	260 mm, 375 mm, 415 mm, N.A
PANEL COMPONENTS	Width of Top Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable	285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A
PANEL COMPONENTS	Height of End panel 22[dot]8 mm (tolerances : +/- 10 mm) Hint : This can be used in aisle conditions only	935 mm, 965 mm, 1050 mm, 1080 mm, 1200 mm, 1235 mm, 1355 mm, 1390 mm, 1470 mm, 1500 mm, N.A
PANEL COMPONENTS	Width of End panel 22[dot]8 mm (tolerances : +/- 10 mm) Hint : This can be used in aisle conditions only	1060 mm (suitable for 450 mm depth worktop), 1360 mm (suitable for 600 mm depth worktop), 1660 mm (suitable for 750 mm depth worktop), N.A
PANEL COMPONENTS	Bottom screen of end panel 22[dot]8 mm (off module fixing)	PLB – fabric finish blocks (made from 18 mm thick PPB/PLB upholstered with fabric using adhesive), Laminate finish blocks (made from 18 mm thick particle board), Metal finish blocks (made from two components – both components are 0.8 mm thick M.S. CRCA Grade D conforming to IS 513 powder coated with epoxy polyester finish and fastened together using M6 nutserts), N.A
PANEL COMPONENTS	Top screen of end panel 22[decimal]8 mm (off module fixing)	PLB – fabric finish blocks (made from 18 mm thick PPB/PLB upholstered with fabric using adhesive), Laminate finish blocks (made from 18 mm thick particle board), White board blocks (made from 16 mm thick particle board laminated with 0.6 mm white glossy high pressure laminate on both sides and having all its edges with minimum 0.5 mm thick PVC edging), N.A
PANEL COMPONENTS	Panel joinery / Posts (22[decimal]8 mm panels cannot be interconnected – these are joined as fin panels to 52[decimal]4 mm panels only using fin posts) Hint : panel can be joined to each other directly with 180 degree joinery or with help of post to	2 way 180 degree, 2 way 90 degree, 3 way 90 degree, 4 way 90 degree, 2 way 120 degree, 3 way 120 degree, Single side (2 way ) End Fin LH/RH – for connecting 22.8 mm panels as fins with 52.4 mm on spine, Single side middle fin - for connecting 22.8 mm panels as fins with 52.4 mm on spine, Both side End Fin (3 way fin) - for connecting 22.8 mm panels as fins with 52.4 mm on spine, Both side shared fin (4 way) - for connecting 22.8 mm panels as fins with 52.4 mm on spine, N.A
PANEL COMPONENTS	Stability post – according to unit height - to avoid movement of free standing panels (tolerances : +/- 10 mm) Hint : End trim fixing is not required alongwith stability post	930 mm (for 3 feet unit height) ), 1045 mm (for 3.5 feet unit height), 1200 mm (for 4 feet unit height, 1350 mm (for 4.5 feet unit height), 1464.5 mm (for 5 feet unit height)

Item #3 Details

View Catalog

Category	Specification	Requirement
STANDARDS	Type of Signage Board	Non-illuminated Signage Board, Glow/illuminated Signage Board
STANDARDS	Lighting Option in Signage Board	LED Backlit, LED Frontlit, Tube Light, Without Lighting
STANDARDS	Material of Signage Board	ACP (Aluminium Composite Panel), Acrylic, PVC Foam Board, Stainless Steel (SS), Aluminum, Sunboard / Foam Sheet, Flex / Vinyl Boards, CRCA Mild Steel Sheet
STANDARDS	Thickness of Signage board Material	3 mm, 5 mm, 8 mm, 10 mm, 12 mm, 2 mm
STANDARDS	Frame Material	Aluminium, Mild Steel (MS) – Powder Coated, Stainless Steel (SS), Galvanized Iron (GI), PVC, NA (In case of No frame)
STANDARDS	Mounting Type	Wall Mounted, Pole Mounted, Hanging Type, Ground Mounted
STANDARDS	Length of the Signage Board (in Feet)	2 feet to 4 feet, 4.1 feet to 6 feet, 6.1 feet to 8 feet, 8.1 feet to 10 feet, 10.1 feet to 14 feet, 14.1 feet to 18 feet, 18.1 feet to 22 feet
STANDARDS	Width of the Signage Board (in Feet)	1 feet to 3 feet, 3.1 feet to 6 feet, 6.1 feet to 10 feet

Item #4 Details

View Catalog

Category	Specification	Requirement
Performance Specifications	Inputs	Mic, Line, Mic / Line Or higher
Performance Specifications	Outputs	Main, Other Or higher
FEATURES	DSP Expandablility option	Yes, No
FEATURES	Limiter	Yes, No
FEATURES	Filters	Yes, No
FEATURES	Feedback supressor	Yes, No
FEATURES	Mixer	Yes, No
FEATURES	Matrix	Yes, No
Others	Warranty	1, 2, 3, 4, 5 Or higher

Item #5 Details

View Catalog

Category	Specification	Requirement
Generic	Almirah Style	Free-standing
General Requirements	Base Material	Sheesham Wood, Mango Wood, Teak Wood, Acacia Wood, Engineered wood, Plywood, Iron, Brass, Steel, Bamboo/Cane, Marble
General Requirements	Availability of Front Mirror	No
General Requirements	Scope of Handicraft	Whole Unit Handcrafted, Finishing Work Only
Doors, Locks and Drawers	No of doors	2
Doors, Locks and Drawers	Door Type	Carved / Designed (of base material), Plain (of base material), Glass
Doors, Locks and Drawers	Front Door Lock Availability	Yes, No
Doors, Locks and Drawers	Front Door Handle Availability	Yes, No
Doors, Locks and Drawers	Total No of Lockable Drawers	0, 1, 2, 3, 4
Doors, Locks and Drawers	Total No of Non-Lockable Drawers	0, 1, 2, 3, 4
Doors, Locks and Drawers	Hanging Feature	Yes, No
Dimensions	Height of Almirah or Cabinets (±6 inches)	36, 48, 60, 72, 84, 96
Dimensions	Width of Almirah or Cabinets(±6 inches)	24, 36, 48, 60, 72
Dimensions	Depth of Almirah or Cabinets (±3 inches)	18, 24, 30

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

Categories 4 available

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Bids are Invited For Decorative Laminate Sheet,Free standing PARTITION PANEL,Signage Board (V4),Audio Digital Signal Pro in LUCKNOW, UTTAR PRADESH

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 9

GeM-Bidding-9757852.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

Other Documents

CATALOG-Specification-4

CATALOG-Specification-5

Other Documents

GEM General Terms and Conditions Document

Authority & Contact

Categories 9

🤖 AI-Powered Bidder Prediction

Required Documents

Technical Specifications 5 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Explore More Opportunities

Documents

Unlock All Documents

GeM-Bidding-9757852.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

Other Documents

CATALOG-Specification-4

CATALOG-Specification-5

Other Documents

GEM General Terms and Conditions Document