Bids are Invited For Main Fire pump,Diesel Driven Pump,Jockey Pump,Terrace Pump,Control Panel,Starter,M S Pipe,M S Pipe, in LUCKNOW, UTTAR PRADESH

SH 1 Wet Riser System Main Fire Pump a Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b Horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 LPM against atotal head of 70 Mtrs Approximately while running at 1450 1500 rpm mechanical seal as required BSNL approved make. c Suitable HP Squirrel cage induction motor TEFC synchronous speed 1500 RPM suitable for operation on 415 volts 3 phase 50 Hz AC supply with IP 55 protection for enclosure horizontal foot mounted type with Class. F insulation conforming to IS 12615 2018. d M.S. fabricated Common base plate coupling,coupling guard, foundation bolts etc. as required. e Suitable cement concrete foundation duly plastered with anti vibration pads Note The head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. The pump room is situated on the underground water tank. 2280 lpm at 70 m Head

Jockey Pump a Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required Jockey Pump b Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class F insulation, conforming to IS 12615 2018. d M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. Note The pump room is situated on the underground water tank. 180 lpm at 70 m Head

CONTROL PANELS Fabrication SITC of Electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick CRCA, artmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete, suitable for main fire pump, pressurisation pump and diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required. INCOMING 250A, 50kA 4 Pole MCCB, Ic equal to 100 Percent Icu rating Digital Voltmeter 0 500V with selector switch Digital Ammeter 0 250 A with selector swtich and CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A. OUTGOING Note All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps Main Fire Pump 125 A, 50kATPN MCCB, Ics is equal to 100 percent Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump Jockey Pump 63 A, 50kA TPN MCCB, Icsis equal to 100 percent Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, Note may please be see at ATC of sr. no. 5

SH II PIPES and ACCESSORIES. Providing laying, testing and commissioning of C class heavy duty MS Pipe conforming to IS 1239/Class II of IS 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm Dia

Providing, laying, testing and commissioning of C class heavy duty MS pipe conforming to IS 1239/Class II of IS 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia

Providing, laying, testing and commissioning of C class heavy duty MS pipe conforming to IS 1239/Class II of IS 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm Dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 Type A with blank Gunmetal/Stainless Steel cap and chain as required.Single headed Gunmetal

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required . 50MM dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required .100 MM dia

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required .200 MM dia

Providing, installation, testing and commissioning of non return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required. 50MM dia

Providing, installation, testing and commissioning of non return valve of following sizes confirming to IS 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required. 100 MM Dia

Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm Dia

Providing, installation, testing and commissioning of stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 MM Dia

Supplying and fixing first aid Hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required. a 20 mm nominal internal dia water hose thermoplastic Textile reinforced type 2 as per IS 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c Drum and brackets for fixing the equipmets on wall. d Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. 30 Mtrs

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia MS pipe connection conforming to IS 904 as required. 2 way 100 mm dia M.S. Pipe

Providing, installation, testing and commissioning of C.I flanged swing type Foot valve ISI marked of following sizes confirming to IS 4038 complete with all acessories complete etc as required.200 mm dia

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof.

SH III Cabling and other Misc work Control wiring required .Providing of following sizes Stranded Aluminum Conductor, XLPE Insulated, PVC Sheathed, 650 V/1100 V Grade as per IS 7098 Part 1 1988 . 3.5 core 25 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm clamped with 1mm thick saddle

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm MS flat clamp

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm MS flat clamp.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.Above 185 sq. mm and upto 400 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Above 185 sq. mm and upto 400 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3.5 core 25 sq. mm Size 28mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3.5 core 300 sq. mm Size 70mm

Supplying and installaton following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders including base of suitable size MS/GI angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness

Providing and fixing 25 mm wide and 5 mm thick G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re filling etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.