PLUG SCREW, 20 INCH DIA,PLUG SCREW (THROAT) PIPE
Iocl- Panipat Refinery
PANIPAT, HARYANA
Posted:
30 December 2024
Closed:
13 January 2025
GEM
GEM
Indian Oil Corporation Limited Marketing Division Tender Kollam Kerala 689695 - ISM/ATC Terms 2026
Progress
Issue31-May-2026, 4:57 pm
AwardPending
Quantity
3073
Category
SMC pneumatic cylinder CP96SDB50 50C Magnetic
Bid Type
Two Packet Bid
Tender Overview
Organization: Indian Oil Corporation Limited, Marketing Division, IOCL. Location: Kollam, Kerala 689695. Product Category: General/BOQ items across 157 line items with no specific specifications disclosed. Estimated Value: ₹2,071,749.29. Tender includes an Option Clause allowing up to 25% quantity variation at contracted rates and a scalable delivery schedule. Unique aspect: ATC/BT terms uploaded; absence of itemized specs implies reliance on the buyer’s ATC and BOQ interpretation for final scope. This tender requires bidders to plan for variable quantities and extended delivery timelines as per contract execution.
Technical Specifications & Requirements
- No technical specifications provided in the public tender data; however, the tender references a BOQ with 157 items. The absence of itemized quantities/units suggests the bidder must rely on the ATC and any uploaded documents to align submissions with the buyer’s expectations. The inclusion of an option clause indicates that suppliers should prepare for price and delivery flexibility. The estimated value points to a mid-range procurement, requiring standard procurement compliance and general supply capabilities. Potential bidders should review the ATC document (uploaded) for required certifications, delivery milestones, and quality assurance terms.
Terms, Conditions & Eligibility
- Option Clause: Purchaser may increase/decrease quantity up to 25% of bid/contract quantity; extended delivery period follows a calculated formula with minimum 30 days. Delivery start aligns with the last date of the original delivery order.
- Additional terms are defined in the Buyer Added ATC document. EMD and precise documentary requirements are not specified in the public data; bidders should review the ATC for critical submission terms, warranty expectations, and penalty provisions. Bidders must comply with the option and extended delivery logic during contract performance.
Key Specifications
-
- Total BOQ items: 157
-
- Estimated value: ₹2,071,749.29
-
- Quantities/units: Not disclosed in public data; to be confirmed via BOQ/ATC
-
- Delivery terms: Extension per option clause; minimum extension 30 days
-
- EMD: Not specified in available data; refer ATC
-
- Standards/Certifications: Review ATC for any required certifications
Terms & Conditions
-
Option clause permits ±25% quantity variation at contracted rates
-
Delivery period depends on original delivery date with calculated extensions
-
Submit per ATC requirements; review uploaded ATC document for exact documents
Important Clauses
Payment Terms
Not specified in public data; refer to ATC for advance/milestone payments and schedule
Delivery Schedule
Delivery starts from last date of original delivery order; extended period as per option clause with minimum 30 days
Penalties/Liquidated Damages
Details likely in ATC; bidders must review ATC for LDs or performance guarantees
Bidder Eligibility
-
Eligibility criteria aligned with BOQ item suppliers and IOCL procurement norms
-
Demonstrated experience in supplying similar generic items to large corporates
-
Financial stability to support performance under variable quantities (25% option)
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Authority Records
MINISTRY OF PETROLEUM AND NATURAL GASINDIAN OIL CORPORATION LIMITED
Free Trial Available
Win more tenders with
real-time intelligence
Trusted by 5,000+ companies to find, track, and win government tenders.
Smart Alerts
Daily matched tenders to your inbox
Bid Results
See L1 winners & actual prices paid
Competitor Intel
Track rival companies & win patterns
Price Intelligence
BOQ rate trends to benchmark your bid
Book a Free Demo
See TenderDekho in action
Our team will walk you through the platform and help set up your profile — free, no commitment.
Demo booked!
Our team will reach out to schedule your free session.
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Bid Preparation
GeM Registration
Document Filing
Free consultation · 24h response
Documents 6
GeM-Bidding-9306481.pdf
Main Document
Other Documents
OTHER
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Past Similar Tenders
(Historical Results)
5 found
SCREW (PART NO: 3172A-4-10KD),RUBBER WASHER (PART NO: 50N-484)
Indian Air Force
Posted:
9 January 2026
Closed:
19 January 2026
GEM
FLOWMETER SCREW TYPE 25MM SCREW TYPE _kranti,FLOWMETER SCREW TYPE 20MM SCREW TYPE _ kranti,FLOWMETE
Chennai Metro Rail Ltd
CHENNAI, TAMIL NADU
Posted:
2 January 2026
Closed:
5 February 2026
GEM
BHEL Screw Type Plug 1/4" to Drg 47191101005 Rev 02 Tender Jhansi Uttar Pradesh 2025
Bharat Heavy Electricals Limited (bhel)
JHANSI, UTTAR PRADESH
Posted:
18 October 2025
Closed:
28 October 2025
GEM
PLUG VALVE ASSEMBLY / HVF/T-90/30/274SBSB
Armoured Vehicles Nigam Limited
TIRUVALLUR, TAMIL NADU
Posted:
7 May 2025
Closed:
24 May 2025
GEM
Tender Results
Loading results...
Bill of Quantities (BOQ)
157 Items Sign in to view GEM price trends Sign in for GEM prices
#1
Plug screw 1by 4
Plug screw 1by 4
10 ea
Delivery: 30 days
#2
FRL Assembly with Auto drain and 5 M Filtration Size 1 by 4 With Pressure Gauge
FRL Assembly with Auto drain and 5 M Filtration Size 1 by 4 With Pressure Gauge
5 ea
Delivery: 30 days
#3
FRL Assembly with Auto drain and 5M Filtration Size 1 by 2 With Pressure Gauge
FRL Assembly with Auto drain and 5M Filtration Size 1 by 2 With Pressure Gauge
2 ea
Delivery: 30 days
#4
FRL 1
FRL 1
2 ea
Delivery: 30 days
#5
Air filter Mist separato Regulator 1 by 4
Air filter Mist separato Regulator 1 by 4
5 ea
Delivery: 30 days
#6
Air filter Mist separato, Regulator 1 by 2
Air filter Mist separato, Regulator 1 by 2
2 ea
Delivery: 30 days
#7
Air filter Mist separator Regulator 1 inch
Air filter Mist separator Regulator 1 inch
2 ea
Delivery: 30 days
#8
Pneumatic Regulator 1by4 x 1by4 with Pressure Gauge
Pneumatic Regulator 1by4 x 1by4 with Pressure Gauge
2 ea
Delivery: 30 days
#9
Swivel flange for Mounting 50 dia Cylinder
Swivel flange for Mounting 50 dia Cylinder
3 ea
Delivery: 30 days
#10
Rod clevis for Pneumatic Cylinder
Rod clevis for Pneumatic Cylinder
5 ea
Delivery: 30 days
#11
Rod eye for Pneumatic Cylinder
Rod eye for Pneumatic Cylinder
5 ea
Delivery: 30 days
#12
Stem actuated valve
Stem actuated valve
2 ea
Delivery: 30 days
#13
Pneumatic NRV 1by4inch
Pneumatic NRV 1by4inch
3 ea
Delivery: 30 days
#14
Push in T connector 8 mm
Push in T connector 8 mm
50 ea
Delivery: 30 days
#15
Push in T connector 6 mm
Push in T connector 6 mm
50 ea
Delivery: 30 days
#16
Push in Tconnector 4 mm
Push in Tconnector 4 mm
50 ea
Delivery: 30 days
#17
Push in Y Connector 8mm
Push in Y Connector 8mm
25 ea
Delivery: 30 days
#18
8mm St Push in fitting with Male thread 1by 4inch
8mm St Push in fitting with Male thread 1by 4inch
50 ea
Delivery: 30 days
#19
6mm St Push in fitting with Male thread 1by 4 inch
6mm St Push in fitting with Male thread 1by 4 inch
50 ea
Delivery: 30 days
#20
4mm St Pushin fitting with Male thread 1 by 4 inch
4mm St Pushin fitting with Male thread 1 by 4 inch
25 ea
Delivery: 30 days
#21
8mm St Push in fitting with Male thread 1 by 8 inch
8mm St Push in fitting with Male thread 1 by 8 inch
10 ea
Delivery: 30 days
#22
6mm St Push in fitting with Male thread 1 by 8 inch
6mm St Push in fitting with Male thread 1 by 8 inch
25 ea
Delivery: 30 days
#23
4mm St Push in fitting with Male thread 1 by 8 inch
4mm St Push in fitting with Male thread 1 by 8 inch
50 ea
Delivery: 30 days
#24
12mm st push in fitting with Male thread 1 by 2 inch
12mm st push in fitting with Male thread 1 by 2 inch
5 ea
Delivery: 30 days
#25
4mm Union Tee Push in fitting with Male thread 1 by 8 inch
4mm Union Tee Push in fitting with Male thread 1 by 8 inch
15 ea
Delivery: 30 days
#26
Threaded Speed Controller R 1 by 4 Male Inlet Port x 8mm Tube Outlet Port
Threaded Speed Controller R 1 by 4 Male Inlet Port x 8mm Tube Outlet Port
3 ea
Delivery: 30 days
#27
Threaded Speed Controller R 1 by 4 Male Inlet Port x 6mm Tube Outlet Port
Threaded Speed Controller R 1 by 4 Male Inlet Port x 6mm Tube Outlet Port
3 ea
Delivery: 30 days
#28
Push in Elbow fitting 1 by 4 inch x 6 mm
Push in Elbow fitting 1 by 4 inch x 6 mm
25 ea
Delivery: 30 days
#29
Push in Elbow fitting 1 by 4 inch x 8 mm
Push in Elbow fitting 1 by 4 inch x 8 mm
25 ea
Delivery: 30 days
#30
Push in Type Straight Connector 4 mm to 4 mm
Push in Type Straight Connector 4 mm to 4 mm
50 ea
Delivery: 30 days
#31
Push in Type straight Connector 6 mm to 6 mm
Push in Type straight Connector 6 mm to 6 mm
50 ea
Delivery: 30 days
#32
Push in Type straight Connector 8 mm to 8 mm
Push in Type straight Connector 8 mm to 8 mm
50 ea
Delivery: 30 days
#33
Push in Type straight Connector 10 mm to 10 mm
Push in Type straight Connector 10 mm to 10 mm
25 ea
Delivery: 30 days
#34
Push in Type straight Connector 10 mm to 8mm
Push in Type straight Connector 10 mm to 8mm
25 ea
Delivery: 30 days
#35
Push in Type straight Connector 8 mm to 4mm
Push in Type straight Connector 8 mm to 4mm
10 ea
Delivery: 30 days
#36
Push in Type straight Connector 8 mm to 6mm
Push in Type straight Connector 8 mm to 6mm
50 ea
Delivery: 30 days
#37
Push in Type straight Connector 6 mm to 4mm
Push in Type straight Connector 6 mm to 4mm
50 ea
Delivery: 30 days
#38
Push in Type straight Connector 12 mm to 10 mm
Push in Type straight Connector 12 mm to 10 mm
10 ea
Delivery: 30 days
#39
Push in Type straight Connector 12 mm to 8 mm
Push in Type straight Connector 12 mm to 8 mm
10 ea
Delivery: 30 days
#40
Quick Exhaust With Silencer 1 by 4 inch
Quick Exhaust With Silencer 1 by 4 inch
10 ea
Delivery: 30 days
#41
Exhaust air flow Controller 1 by 4 inch
Exhaust air flow Controller 1 by 4 inch
10 ea
Delivery: 30 days
#42
PU Tube 4 mm 100m
PU Tube 4 mm 100m
150 mtr
Delivery: 30 days
#43
PU Tube 6 mm 100m
PU Tube 6 mm 100m
150 mtr
Delivery: 30 days
#44
PU Tube 8 mm 100m
PU Tube 8 mm 100m
150 mtr
Delivery: 30 days
#45
PU Tube 10 mm 100m
PU Tube 10 mm 100m
50 mtr
Delivery: 30 days
#46
PU Tube 12 mm 100m
PU Tube 12 mm 100m
50 mtr
Delivery: 30 days
#47
Limit Switch Long Roller Lever
Limit Switch Long Roller Lever
5 ea
Delivery: 30 days
#48
Knob 3 port Valve Pneumatic Manual Control Valve One Touch Fitting 6mm to 6mm
Knob 3 port Valve Pneumatic Manual Control Valve One Touch Fitting 6mm to 6mm
2 ea
Delivery: 30 days
#49
5 by 2 Hand lever operated valve with detent with port size 1 by 8 inch
5 by 2 Hand lever operated valve with detent with port size 1 by 8 inch
5 ea
Delivery: 30 days
#50
5 by 3 Hand lever operated valve with spring centered 1 by 4 inch Exhausted
5 by 3 Hand lever operated valve with spring centered 1 by 4 inch Exhausted
10 ea
Delivery: 30 days
#51
5 by 2 Hand lever operated valve with detent with port size 1 by 4 inch
5 by 2 Hand lever operated valve with detent with port size 1 by 4 inch
10 ea
Delivery: 30 days
#52
5 by 2 Pneumatic Pilot Operated Valve with port size 1 by 4 inch
5 by 2 Pneumatic Pilot Operated Valve with port size 1 by 4 inch
10 ea
Delivery: 30 days
#53
5 by 2 Double Pneumatic Pilot Operated Valve port size 1 by 4 inch
5 by 2 Double Pneumatic Pilot Operated Valve port size 1 by 4 inch
10 ea
Delivery: 30 days
#54
5 by 2 SOV WITH COIL 1 by 4 inch PNEUMAX XMX5
5 by 2 SOV WITH COIL 1 by 4 inch PNEUMAX XMX5
5 ea
Delivery: 30 days
#55
Push Button Pneumatic Relay Mechanical Valve 1 by 4
Push Button Pneumatic Relay Mechanical Valve 1 by 4
10 ea
Delivery: 30 days
#56
OR Gate Pneumatic port size 1 by 8 inch
OR Gate Pneumatic port size 1 by 8 inch
15 ea
Delivery: 30 days
#57
AND Gate Pneumatic With through hole mounting
AND Gate Pneumatic With through hole mounting
15 ea
Delivery: 30 days
#58
Valve for limit switch SV 3 M5 Festo
Valve for limit switch SV 3 M5 Festo
3 ea
Delivery: 30 days
#59
Pneumatic Limit Switch Valve port G 1 by 4 inch with Mounting for Conveyor line
Pneumatic Limit Switch Valve port G 1 by 4 inch with Mounting for Conveyor line
10 ea
Delivery: 30 days
#60
Pneumatic delay Timer valve FESTO VZ3 PK3
Pneumatic delay Timer valve FESTO VZ3 PK3
3 ea
Delivery: 30 days
#61
Pneumatic Timer
Pneumatic Timer
10 ea
Delivery: 30 days
#62
ISO profile Pneumatic Cylinder 50dia x 80 mm
ISO profile Pneumatic Cylinder 50dia x 80 mm
10 ea
Delivery: 30 days
#63
ISO profile Pneumatic Cylinder 50dia x 100 mm
ISO profile Pneumatic Cylinder 50dia x 100 mm
5 ea
Delivery: 30 days
#64
ISO profile Pneumatic Cylinder 50dia x 160 mm
ISO profile Pneumatic Cylinder 50dia x 160 mm
2 ea
Delivery: 30 days
#65
ISO std. profile Cylinder 50 dia X 300 mm
ISO std. profile Cylinder 50 dia X 300 mm
10 ea
Delivery: 30 days
#66
ISO profile Pneumatic Cylinder 50dia x 320 mm, Magnetic
ISO profile Pneumatic Cylinder 50dia x 320 mm, Magnetic
2 ea
Delivery: 30 days
#67
ISO profile Pneumatic Cylinder 50dia x400 mm
ISO profile Pneumatic Cylinder 50dia x400 mm
3 ea
Delivery: 30 days
#68
ISO Pneumatic Cylinder 63dia x 50 mm
ISO Pneumatic Cylinder 63dia x 50 mm
2 ea
Delivery: 30 days
#69
ISO Pneumatic Cylinder 63dia x 75 mm
ISO Pneumatic Cylinder 63dia x 75 mm
3 ea
Delivery: 30 days
#70
ISO Pneumatic Cylinder 63dia x 100 mm
ISO Pneumatic Cylinder 63dia x 100 mm
2 ea
Delivery: 30 days
#71
SMC pneumatic cylinder CP96SDB40 300C
SMC pneumatic cylinder CP96SDB40 300C
7 ea
Delivery: 30 days
#72
SMC pneumatic cylinder CP96KDB40 400C
SMC pneumatic cylinder CP96KDB40 400C
2 ea
Delivery: 30 days
#73
SMC pneumatic cylinder CP96SDB50 50C Magnetic
SMC pneumatic cylinder CP96SDB50 50C Magnetic
10 ea
Delivery: 30 days
#74
SMC Pneumatic cylinder CP96SDB50 300C 50x300 Magnetic
SMC Pneumatic cylinder CP96SDB50 300C 50x300 Magnetic
10 ea
Delivery: 30 days
#75
SMC pneumatic cylinder CP96SDB50 350C
SMC pneumatic cylinder CP96SDB50 350C
2 ea
Delivery: 30 days
#76
SMC pneumatic cylinder CP96SDB50 450C
SMC pneumatic cylinder CP96SDB50 450C
2 ea
Delivery: 30 days
#77
SMC pneumatic cylinder CP96SDB50 550C
SMC pneumatic cylinder CP96SDB50 550C
1 ea
Delivery: 30 days
#78
SMC pneumatic cylinder CD55B63 80M
SMC pneumatic cylinder CD55B63 80M
5 ea
Delivery: 30 days
#79
Norgren pneumatic cylinder PRA 802050 M 450
Norgren pneumatic cylinder PRA 802050 M 450
2 ea
Delivery: 30 days
#80
Seal Kit for 50mm Dia Pneumatic Cylinder Norgren Part NO PRA 802050 M 450
Seal Kit for 50mm Dia Pneumatic Cylinder Norgren Part NO PRA 802050 M 450
5 ea
Delivery: 30 days
#81
Seal Kit for 50mm Dia Pneumatic Cylinder SMC Make
Seal Kit for 50mm Dia Pneumatic Cylinder SMC Make
10 ea
Delivery: 30 days
#82
Seal Kit for 50mm Dia Pneumatic Cylinder Janatics Make
Seal Kit for 50mm Dia Pneumatic Cylinder Janatics Make
10 ea
Delivery: 30 days
#83
Seal Kit for 63 mm Dia Pneumatic Cylinder Norgren Make
Seal Kit for 63 mm Dia Pneumatic Cylinder Norgren Make
5 ea
Delivery: 30 days
#84
Seal Kit for 63 mm Dia Pneumatic Cylinder SMC Make
Seal Kit for 63 mm Dia Pneumatic Cylinder SMC Make
5 ea
Delivery: 30 days
#85
Seal Kit for 63 mm Dia Pneumatic Cylinder Janatics make
Seal Kit for 63 mm Dia Pneumatic Cylinder Janatics make
5 ea
Delivery: 30 days
#86
Seal Kit for 40mm Dia Pneumatic Cylinder SMC Make
Seal Kit for 40mm Dia Pneumatic Cylinder SMC Make
5 ea
Delivery: 30 days
#87
Deadman switch Janatics DP04SR61
Deadman switch Janatics DP04SR61
10 ea
Delivery: 30 days
#88
Supply of Pneumatic Drag chain for Conveyor with inner width 100 to 150 mm and inner height 30 to 50 mm
Supply of Pneumatic Drag chain for Conveyor with inner width 100 to 150 mm and inner height 30 to 50 mm
20 mtrs
Delivery: 30 days
#89
UCP 213 NTN Bearing
UCP 213 NTN Bearing
20 ea
Delivery: 30 days
#90
UCP 212 NTN Bearing
UCP 212 NTN Bearing
4 ea
Delivery: 30 days
#91
UCP 210 NTN Bearing
UCP 210 NTN Bearing
4 ea
Delivery: 30 days
#92
BEARING P212
BEARING P212
2 ea
Delivery: 30 days
#93
BEARING P213
BEARING P213
5 ea
Delivery: 30 days
#94
Nylon stopper roller with S.S bush fitti 80x40x28
Nylon stopper roller with S.S bush fitti 80x40x28
30 ea
Delivery: 30 days
#95
Conveyor Shaft with key dia 65mm length 850mm to 870mm key slot as per requirement material grade EN8 9 as per IOC sample
Conveyor Shaft with key dia 65mm length 850mm to 870mm key slot as per requirement material grade EN8 9 as per IOC sample
10 ea
Delivery: 30 days
#96
Head Sprocket 14 teeth 65mm dia
Head Sprocket 14 teeth 65mm dia
30 ea
Delivery: 30 days
#97
Tail Sprocket 8 teeth
Tail Sprocket 8 teeth
100 ea
Delivery: 30 days
#98
Conveyor Chain detachable type
Conveyor Chain detachable type
500 meter
Delivery: 30 days
#99
Chain pins
Chain pins
50 ea
Delivery: 30 days
#100
MS 2.5 MTR C CHANNEL FOR CONVEYOR
MS 2.5 MTR C CHANNEL FOR CONVEYOR
15 ea
Delivery: 30 days
#101
Twin arm stopper set with cylinder
Twin arm stopper set with cylinder
3 ea
Delivery: 30 days
#102
Stopper set arrow type right angle stopper
Stopper set arrow type right angle stopper
6 ea
Delivery: 30 days
#103
WT24-2X400 Diffuse Sensor SICK
WT24-2X400 Diffuse Sensor SICK
3 ea
Delivery: 30 days
#104
WL24X430 Reflective Sensor sick
WL24X430 Reflective Sensor sick
2 ea
Delivery: 30 days
#105
WLL24X430 Optical sensor SICK
WLL24X430 Optical sensor SICK
1 ea
Delivery: 30 days
#106
SXE 9561 A86 00 Solenoid valve with coil NORGREN
SXE 9561 A86 00 Solenoid valve with coil NORGREN
5 ea
Delivery: 30 days
#107
Kosan Loadcell Flintec PC6 200Kg
Kosan Loadcell Flintec PC6 200Kg
5 ea
Delivery: 30 days
#108
40 MM BORE MS idler shaft 500 mm
40 MM BORE MS idler shaft 500 mm
5 ea
Delivery: 30 days
#109
40 MM BORE MS idler shaft 400 mm
40 MM BORE MS idler shaft 400 mm
7 ea
Delivery: 30 days
#110
40 mm Bore MS idler shaft 380 mm
40 mm Bore MS idler shaft 380 mm
5 ea
Delivery: 30 days
#111
40 mm Bore MS idler shaft 350 mm
40 mm Bore MS idler shaft 350 mm
7 ea
Delivery: 30 days
#112
40 mm Bore MS idler shaft 300 mm
40 mm Bore MS idler shaft 300 mm
7 ea
Delivery: 30 days
#113
STUD W NUT IS1363 CS M16x100MM
STUD W/NUT IS1363 CS M16x100MM
25 ea
Delivery: 30 days
#114
BOLTS ALLEN HEAD A193 GR B7 M6X30MM
BOLTS ALLEN HEAD A193 GR B7 M6X30MM
20 ea
Delivery: 30 days
#115
M6 x 35 CSK Allen Bolt and Nut HT MS
M6 x 35 CSK Allen Bolt and Nut HT MS
20 ea
Delivery: 30 days
#116
BOLT ALLEN HD AS IS367 M8x30mm
BOLT ALLEN HD AS IS367 M8x30mm
20 ea
Delivery: 30 days
#117
M8 x 35 CSK Allen Bolt and Nut HT MS
M8 x 35 CSK Allen Bolt and Nut HT MS
20 ea
Delivery: 30 days
#118
BOLT HExHD CS IS 1367 M10x40mm
BOLT HExHD CS IS 1367 M10x40mm
50 ea
Delivery: 30 days
#119
HEX NUT M10 IS1367 CL 4
HEX NUT M10 IS1367 CL 4
25 ea
Delivery: 30 days
#120
12 MM X 40 MM NUTWITH DOUBLE WASHER BOLT
12 MM X 40 MM NUTWITH DOUBLE WASHER BOLT
25 kg
Delivery: 30 days
#121
SS lock nut 6mm 40mm long nut and bolt
SS lock nut 6mm 40mm long nut and bolt
25 ea
Delivery: 30 days
#122
SS lock nut 8mm 40mm long nut and bolt
SS lock nut 8mm 40mm long nut and bolt
15 ea
Delivery: 30 days
#123
MS Nut Bolt For Conveyor Teflon
MS Nut Bolt For Conveyor Teflon
50 ea
Delivery: 30 days
#124
Boom Drive pinion
Boom Drive pinion
4 ea
Delivery: 30 days
#125
Boom drive shaft
Boom drive shaft
2 ea
Delivery: 30 days
#126
Anchor bolt 10 x125
Anchor bolt 10 x125
50 ea
Delivery: 30 days
#127
Anker bolt 12 x125
Anker bolt 12 x125
25 ea
Delivery: 30 days
#128
Anker bolt 16 x150
Anker bolt 16 x150
20 ea
Delivery: 30 days
#129
Dead weights pair
Dead weights pair
3 ea
Delivery: 30 days
#130
BEND TAPER STRIP 90 DEG CS CONVEYOR INNER 1550MM
BEND TAPER STRIP 90 DEG CS CONVEYOR INNER 1550MM
5 ea
Delivery: 30 days
#131
BEND TAPER STRIP 90 DEG CS CONVEYOR OUTER 1850MM
BEND TAPER STRIP 90 DEG CS CONVEYOR OUTER 1850MM
5 ea
Delivery: 30 days
#132
TAPER FLAT CONVEYOR INTECH OUTER 13BY 8X32X1850MM
TAPER FLAT CONVEYOR INTECH OUTER 13BY 8X32X1850MM
5 ea
Delivery: 30 days
#133
TAPER FLAT CONVEYOR INTECH INNER 13BY 8X32X1850MM
TAPER FLAT CONVEYOR INTECH INNER 13BY 8X32X1850MM
5 ea
Delivery: 30 days
#134
MS Angle for Conveyor
MS Angle for Conveyor
50 m
Delivery: 30 days
#135
PRESSURE GAUGE G F SS 304 10kg DIA 4inch
PRESSURE GAUGE G F SS 304 10kg DIA 4inch
5 ea
Delivery: 30 days
#136
PRESSURE GAUGE G F SS 304 16kg DIA 4 inch
PRESSURE GAUGE G F SS 304 16kg DIA 4 inch
5 ea
Delivery: 30 days
#137
PRESSURE GAUGE G F SS 304 28kg DIA 6 inch
PRESSURE GAUGE G F SS 304 28kg DIA 6 inch
5 ea
Delivery: 30 days
#138
PRESSURE GAUGE G F SS 304 28kg DIA 4 inch
PRESSURE GAUGE G F SS 304 28kg DIA 4 inch
5 ea
Delivery: 30 days
#139
vaccum gauge 0 760 to 1kg dial 4 inch
vaccum gauge 0 760 to 1kg dial 4 inch
2 ea
Delivery: 30 days
#140
TEMPERATURE GAUGE SS 304 0 to 200C DIA-4 inch P
TEMPERATURE GAUGE SS 304 0 to 200C DIA-4 inch P
2 ea
Delivery: 30 days
#141
CVT HEADS
CVT HEADS
1 ea
Delivery: 30 days
#142
CVT Gun seal kit
CVT Gun seal kit
2 ea
Delivery: 30 days
#143
LPG hose for carousel 1000mm length as per IOCsample
LPG hose for carousel 1000mm length as per IOCsample
10 ea
Delivery: 30 days
#144
LPG hose for carousel 800mm length as per IOCsample
LPG hose for carousel 800mm length as per IOCsample
10 ea
Delivery: 30 days
#145
1 by 2inch x 2mts teflon hose with S S and as
1 by 2inch x 2mts teflon hose with S S and as
1 ea
Delivery: 30 days
#146
1 by 2inch x 600mm teflon hose with S S and a
1 by 2inch x 600mm teflon hose with S S and a
2 ea
Delivery: 30 days
#147
WD 40 Spray 450ml
WD 40 Spray 450ml
2 ea
Delivery: 30 days
#148
NORD GEAR BOX COUPLING 3HP
NORD GEAR BOX COUPLING 3HP
5 ea
Delivery: 30 days
#149
NORD GEAR BOX COUPLING 5 HP
NORD GEAR BOX COUPLING 5 HP
5 ea
Delivery: 30 days
#150
1 by 2 inch INCH BALL VALVE HEAVY DUTY
1 by 2 inch INCH BALL VALVE HEAVY DUTY
5 ea
Delivery: 30 days
#151
1inch INCH BALL VALVE HEAVY DUTY
1inch INCH BALL VALVE HEAVY DUTY
5 ea
Delivery: 30 days
#152
GUNS OF HOT AIR SEALING MACHINE
GUNS OF HOT AIR SEALING MACHINE
2 ea
Delivery: 30 days
#153
TYRE AND RIM CAROUSEL M and P
TYRE AND RIM CAROUSEL M and P
1 ea
Delivery: 30 days
#154
Tube 3 50 08
Tube 3 50 08
1 ea
Delivery: 30 days
#155
RUBBER MAT 1 MTR X 2 MTR X 25 MM THICK
RUBBER MAT 1 MTR X 2 MTR X 25 MM THICK
5 ea
Delivery: 30 days
#156
FLP Elec limit switch Baliga 10A FLS 2113
FLP Elec limit switch Baliga 10A FLS 2113
5 ea
Delivery: 30 days
#157
5 by 2 Solenoid Valve with Coil 230V Rotex Size 1 by 4 inch, Rotex
5 by 2 Solenoid Valve with Coil 230V Rotex Size 1 by 4 inch, Rotex
5 ea
Delivery: 30 days
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Plug screw 1by 4 | Plug screw 1by 4 | 10 | ea | sro0_maintenance | 30 | |
| 2 | FRL Assembly with Auto drain and 5 M Filtration Size 1 by 4 With Pressure Gauge | FRL Assembly with Auto drain and 5 M Filtration Size 1 by 4 With Pressure Gauge | 5 | ea | sro0_maintenance | 30 | |
| 3 | FRL Assembly with Auto drain and 5M Filtration Size 1 by 2 With Pressure Gauge | FRL Assembly with Auto drain and 5M Filtration Size 1 by 2 With Pressure Gauge | 2 | ea | sro0_maintenance | 30 | |
| 4 | FRL 1 | FRL 1 | 2 | ea | sro0_maintenance | 30 | |
| 5 | Air filter Mist separato Regulator 1 by 4 | Air filter Mist separato Regulator 1 by 4 | 5 | ea | sro0_maintenance | 30 | |
| 6 | Air filter Mist separato, Regulator 1 by 2 | Air filter Mist separato, Regulator 1 by 2 | 2 | ea | sro0_maintenance | 30 | |
| 7 | Air filter Mist separator Regulator 1 inch | Air filter Mist separator Regulator 1 inch | 2 | ea | sro0_maintenance | 30 | |
| 8 | Pneumatic Regulator 1by4 x 1by4 with Pressure Gauge | Pneumatic Regulator 1by4 x 1by4 with Pressure Gauge | 2 | ea | sro0_maintenance | 30 | |
| 9 | Swivel flange for Mounting 50 dia Cylinder | Swivel flange for Mounting 50 dia Cylinder | 3 | ea | sro0_maintenance | 30 | |
| 10 | Rod clevis for Pneumatic Cylinder | Rod clevis for Pneumatic Cylinder | 5 | ea | sro0_maintenance | 30 | |
| 11 | Rod eye for Pneumatic Cylinder | Rod eye for Pneumatic Cylinder | 5 | ea | sro0_maintenance | 30 | |
| 12 | Stem actuated valve | Stem actuated valve | 2 | ea | sro0_maintenance | 30 | |
| 13 | Pneumatic NRV 1by4inch | Pneumatic NRV 1by4inch | 3 | ea | sro0_maintenance | 30 | |
| 14 | Push in T connector 8 mm | Push in T connector 8 mm | 50 | ea | sro0_maintenance | 30 | |
| 15 | Push in T connector 6 mm | Push in T connector 6 mm | 50 | ea | sro0_maintenance | 30 | |
| 16 | Push in Tconnector 4 mm | Push in Tconnector 4 mm | 50 | ea | sro0_maintenance | 30 | |
| 17 | Push in Y Connector 8mm | Push in Y Connector 8mm | 25 | ea | sro0_maintenance | 30 | |
| 18 | 8mm St Push in fitting with Male thread 1by 4inch | 8mm St Push in fitting with Male thread 1by 4inch | 50 | ea | sro0_maintenance | 30 | |
| 19 | 6mm St Push in fitting with Male thread 1by 4 inch | 6mm St Push in fitting with Male thread 1by 4 inch | 50 | ea | sro0_maintenance | 30 | |
| 20 | 4mm St Pushin fitting with Male thread 1 by 4 inch | 4mm St Pushin fitting with Male thread 1 by 4 inch | 25 | ea | sro0_maintenance | 30 | |
| 21 | 8mm St Push in fitting with Male thread 1 by 8 inch | 8mm St Push in fitting with Male thread 1 by 8 inch | 10 | ea | sro0_maintenance | 30 | |
| 22 | 6mm St Push in fitting with Male thread 1 by 8 inch | 6mm St Push in fitting with Male thread 1 by 8 inch | 25 | ea | sro0_maintenance | 30 | |
| 23 | 4mm St Push in fitting with Male thread 1 by 8 inch | 4mm St Push in fitting with Male thread 1 by 8 inch | 50 | ea | sro0_maintenance | 30 | |
| 24 | 12mm st push in fitting with Male thread 1 by 2 inch | 12mm st push in fitting with Male thread 1 by 2 inch | 5 | ea | sro0_maintenance | 30 | |
| 25 | 4mm Union Tee Push in fitting with Male thread 1 by 8 inch | 4mm Union Tee Push in fitting with Male thread 1 by 8 inch | 15 | ea | sro0_maintenance | 30 | |
| 26 | Threaded Speed Controller R 1 by 4 Male Inlet Port x 8mm Tube Outlet Port | Threaded Speed Controller R 1 by 4 Male Inlet Port x 8mm Tube Outlet Port | 3 | ea | sro0_maintenance | 30 | |
| 27 | Threaded Speed Controller R 1 by 4 Male Inlet Port x 6mm Tube Outlet Port | Threaded Speed Controller R 1 by 4 Male Inlet Port x 6mm Tube Outlet Port | 3 | ea | sro0_maintenance | 30 | |
| 28 | Push in Elbow fitting 1 by 4 inch x 6 mm | Push in Elbow fitting 1 by 4 inch x 6 mm | 25 | ea | sro0_maintenance | 30 | |
| 29 | Push in Elbow fitting 1 by 4 inch x 8 mm | Push in Elbow fitting 1 by 4 inch x 8 mm | 25 | ea | sro0_maintenance | 30 | |
| 30 | Push in Type Straight Connector 4 mm to 4 mm | Push in Type Straight Connector 4 mm to 4 mm | 50 | ea | sro0_maintenance | 30 | |
| 31 | Push in Type straight Connector 6 mm to 6 mm | Push in Type straight Connector 6 mm to 6 mm | 50 | ea | sro0_maintenance | 30 | |
| 32 | Push in Type straight Connector 8 mm to 8 mm | Push in Type straight Connector 8 mm to 8 mm | 50 | ea | sro0_maintenance | 30 | |
| 33 | Push in Type straight Connector 10 mm to 10 mm | Push in Type straight Connector 10 mm to 10 mm | 25 | ea | sro0_maintenance | 30 | |
| 34 | Push in Type straight Connector 10 mm to 8mm | Push in Type straight Connector 10 mm to 8mm | 25 | ea | sro0_maintenance | 30 | |
| 35 | Push in Type straight Connector 8 mm to 4mm | Push in Type straight Connector 8 mm to 4mm | 10 | ea | sro0_maintenance | 30 | |
| 36 | Push in Type straight Connector 8 mm to 6mm | Push in Type straight Connector 8 mm to 6mm | 50 | ea | sro0_maintenance | 30 | |
| 37 | Push in Type straight Connector 6 mm to 4mm | Push in Type straight Connector 6 mm to 4mm | 50 | ea | sro0_maintenance | 30 | |
| 38 | Push in Type straight Connector 12 mm to 10 mm | Push in Type straight Connector 12 mm to 10 mm | 10 | ea | sro0_maintenance | 30 | |
| 39 | Push in Type straight Connector 12 mm to 8 mm | Push in Type straight Connector 12 mm to 8 mm | 10 | ea | sro0_maintenance | 30 | |
| 40 | Quick Exhaust With Silencer 1 by 4 inch | Quick Exhaust With Silencer 1 by 4 inch | 10 | ea | sro0_maintenance | 30 | |
| 41 | Exhaust air flow Controller 1 by 4 inch | Exhaust air flow Controller 1 by 4 inch | 10 | ea | sro0_maintenance | 30 | |
| 42 | PU Tube 4 mm 100m | PU Tube 4 mm 100m | 150 | mtr | sro0_maintenance | 30 | |
| 43 | PU Tube 6 mm 100m | PU Tube 6 mm 100m | 150 | mtr | sro0_maintenance | 30 | |
| 44 | PU Tube 8 mm 100m | PU Tube 8 mm 100m | 150 | mtr | sro0_maintenance | 30 | |
| 45 | PU Tube 10 mm 100m | PU Tube 10 mm 100m | 50 | mtr | sro0_maintenance | 30 | |
| 46 | PU Tube 12 mm 100m | PU Tube 12 mm 100m | 50 | mtr | sro0_maintenance | 30 | |
| 47 | Limit Switch Long Roller Lever | Limit Switch Long Roller Lever | 5 | ea | sro0_maintenance | 30 | |
| 48 | Knob 3 port Valve Pneumatic Manual Control Valve One Touch Fitting 6mm to 6mm | Knob 3 port Valve Pneumatic Manual Control Valve One Touch Fitting 6mm to 6mm | 2 | ea | sro0_maintenance | 30 | |
| 49 | 5 by 2 Hand lever operated valve with detent with port size 1 by 8 inch | 5 by 2 Hand lever operated valve with detent with port size 1 by 8 inch | 5 | ea | sro0_maintenance | 30 | |
| 50 | 5 by 3 Hand lever operated valve with spring centered 1 by 4 inch Exhausted | 5 by 3 Hand lever operated valve with spring centered 1 by 4 inch Exhausted | 10 | ea | sro0_maintenance | 30 | |
| 51 | 5 by 2 Hand lever operated valve with detent with port size 1 by 4 inch | 5 by 2 Hand lever operated valve with detent with port size 1 by 4 inch | 10 | ea | sro0_maintenance | 30 | |
| 52 | 5 by 2 Pneumatic Pilot Operated Valve with port size 1 by 4 inch | 5 by 2 Pneumatic Pilot Operated Valve with port size 1 by 4 inch | 10 | ea | sro0_maintenance | 30 | |
| 53 | 5 by 2 Double Pneumatic Pilot Operated Valve port size 1 by 4 inch | 5 by 2 Double Pneumatic Pilot Operated Valve port size 1 by 4 inch | 10 | ea | sro0_maintenance | 30 | |
| 54 | 5 by 2 SOV WITH COIL 1 by 4 inch PNEUMAX XMX5 | 5 by 2 SOV WITH COIL 1 by 4 inch PNEUMAX XMX5 | 5 | ea | sro0_maintenance | 30 | |
| 55 | Push Button Pneumatic Relay Mechanical Valve 1 by 4 | Push Button Pneumatic Relay Mechanical Valve 1 by 4 | 10 | ea | sro0_maintenance | 30 | |
| 56 | OR Gate Pneumatic port size 1 by 8 inch | OR Gate Pneumatic port size 1 by 8 inch | 15 | ea | sro0_maintenance | 30 | |
| 57 | AND Gate Pneumatic With through hole mounting | AND Gate Pneumatic With through hole mounting | 15 | ea | sro0_maintenance | 30 | |
| 58 | Valve for limit switch SV 3 M5 Festo | Valve for limit switch SV 3 M5 Festo | 3 | ea | sro0_maintenance | 30 | |
| 59 | Pneumatic Limit Switch Valve port G 1 by 4 inch with Mounting for Conveyor line | Pneumatic Limit Switch Valve port G 1 by 4 inch with Mounting for Conveyor line | 10 | ea | sro0_maintenance | 30 | |
| 60 | Pneumatic delay Timer valve FESTO VZ3 PK3 | Pneumatic delay Timer valve FESTO VZ3 PK3 | 3 | ea | sro0_maintenance | 30 | |
| 61 | Pneumatic Timer | Pneumatic Timer | 10 | ea | sro0_maintenance | 30 | |
| 62 | ISO profile Pneumatic Cylinder 50dia x 80 mm | ISO profile Pneumatic Cylinder 50dia x 80 mm | 10 | ea | sro0_maintenance | 30 | |
| 63 | ISO profile Pneumatic Cylinder 50dia x 100 mm | ISO profile Pneumatic Cylinder 50dia x 100 mm | 5 | ea | sro0_maintenance | 30 | |
| 64 | ISO profile Pneumatic Cylinder 50dia x 160 mm | ISO profile Pneumatic Cylinder 50dia x 160 mm | 2 | ea | sro0_maintenance | 30 | |
| 65 | ISO std. profile Cylinder 50 dia X 300 mm | ISO std. profile Cylinder 50 dia X 300 mm | 10 | ea | sro0_maintenance | 30 | |
| 66 | ISO profile Pneumatic Cylinder 50dia x 320 mm, Magnetic | ISO profile Pneumatic Cylinder 50dia x 320 mm, Magnetic | 2 | ea | sro0_maintenance | 30 | |
| 67 | ISO profile Pneumatic Cylinder 50dia x400 mm | ISO profile Pneumatic Cylinder 50dia x400 mm | 3 | ea | sro0_maintenance | 30 | |
| 68 | ISO Pneumatic Cylinder 63dia x 50 mm | ISO Pneumatic Cylinder 63dia x 50 mm | 2 | ea | sro0_maintenance | 30 | |
| 69 | ISO Pneumatic Cylinder 63dia x 75 mm | ISO Pneumatic Cylinder 63dia x 75 mm | 3 | ea | sro0_maintenance | 30 | |
| 70 | ISO Pneumatic Cylinder 63dia x 100 mm | ISO Pneumatic Cylinder 63dia x 100 mm | 2 | ea | sro0_maintenance | 30 | |
| 71 | SMC pneumatic cylinder CP96SDB40 300C | SMC pneumatic cylinder CP96SDB40 300C | 7 | ea | sro0_maintenance | 30 | |
| 72 | SMC pneumatic cylinder CP96KDB40 400C | SMC pneumatic cylinder CP96KDB40 400C | 2 | ea | sro0_maintenance | 30 | |
| 73 | SMC pneumatic cylinder CP96SDB50 50C Magnetic | SMC pneumatic cylinder CP96SDB50 50C Magnetic | 10 | ea | sro0_maintenance | 30 | |
| 74 | SMC Pneumatic cylinder CP96SDB50 300C 50x300 Magnetic | SMC Pneumatic cylinder CP96SDB50 300C 50x300 Magnetic | 10 | ea | sro0_maintenance | 30 | |
| 75 | SMC pneumatic cylinder CP96SDB50 350C | SMC pneumatic cylinder CP96SDB50 350C | 2 | ea | sro0_maintenance | 30 | |
| 76 | SMC pneumatic cylinder CP96SDB50 450C | SMC pneumatic cylinder CP96SDB50 450C | 2 | ea | sro0_maintenance | 30 | |
| 77 | SMC pneumatic cylinder CP96SDB50 550C | SMC pneumatic cylinder CP96SDB50 550C | 1 | ea | sro0_maintenance | 30 | |
| 78 | SMC pneumatic cylinder CD55B63 80M | SMC pneumatic cylinder CD55B63 80M | 5 | ea | sro0_maintenance | 30 | |
| 79 | Norgren pneumatic cylinder PRA 802050 M 450 | Norgren pneumatic cylinder PRA 802050 M 450 | 2 | ea | sro0_maintenance | 30 | |
| 80 | Seal Kit for 50mm Dia Pneumatic Cylinder Norgren Part NO PRA 802050 M 450 | Seal Kit for 50mm Dia Pneumatic Cylinder Norgren Part NO PRA 802050 M 450 | 5 | ea | sro0_maintenance | 30 | |
| 81 | Seal Kit for 50mm Dia Pneumatic Cylinder SMC Make | Seal Kit for 50mm Dia Pneumatic Cylinder SMC Make | 10 | ea | sro0_maintenance | 30 | |
| 82 | Seal Kit for 50mm Dia Pneumatic Cylinder Janatics Make | Seal Kit for 50mm Dia Pneumatic Cylinder Janatics Make | 10 | ea | sro0_maintenance | 30 | |
| 83 | Seal Kit for 63 mm Dia Pneumatic Cylinder Norgren Make | Seal Kit for 63 mm Dia Pneumatic Cylinder Norgren Make | 5 | ea | sro0_maintenance | 30 | |
| 84 | Seal Kit for 63 mm Dia Pneumatic Cylinder SMC Make | Seal Kit for 63 mm Dia Pneumatic Cylinder SMC Make | 5 | ea | sro0_maintenance | 30 | |
| 85 | Seal Kit for 63 mm Dia Pneumatic Cylinder Janatics make | Seal Kit for 63 mm Dia Pneumatic Cylinder Janatics make | 5 | ea | sro0_maintenance | 30 | |
| 86 | Seal Kit for 40mm Dia Pneumatic Cylinder SMC Make | Seal Kit for 40mm Dia Pneumatic Cylinder SMC Make | 5 | ea | sro0_maintenance | 30 | |
| 87 | Deadman switch Janatics DP04SR61 | Deadman switch Janatics DP04SR61 | 10 | ea | sro0_maintenance | 30 | |
| 88 | Supply of Pneumatic Drag chain for Conveyor with inner width 100 to 150 mm and inner height 30 to 50 mm | Supply of Pneumatic Drag chain for Conveyor with inner width 100 to 150 mm and inner height 30 to 50 mm | 20 | mtrs | sro0_maintenance | 30 | |
| 89 | UCP 213 NTN Bearing | UCP 213 NTN Bearing | 20 | ea | sro0_maintenance | 30 | |
| 90 | UCP 212 NTN Bearing | UCP 212 NTN Bearing | 4 | ea | sro0_maintenance | 30 | |
| 91 | UCP 210 NTN Bearing | UCP 210 NTN Bearing | 4 | ea | sro0_maintenance | 30 | |
| 92 | BEARING P212 | BEARING P212 | 2 | ea | sro0_maintenance | 30 | |
| 93 | BEARING P213 | BEARING P213 | 5 | ea | sro0_maintenance | 30 | |
| 94 | Nylon stopper roller with S.S bush fitti 80x40x28 | Nylon stopper roller with S.S bush fitti 80x40x28 | 30 | ea | sro0_maintenance | 30 | |
| 95 | Conveyor Shaft with key dia 65mm length 850mm to 870mm key slot as per requirement material grade EN8 9 as per IOC sample | Conveyor Shaft with key dia 65mm length 850mm to 870mm key slot as per requirement material grade EN8 9 as per IOC sample | 10 | ea | sro0_maintenance | 30 | |
| 96 | Head Sprocket 14 teeth 65mm dia | Head Sprocket 14 teeth 65mm dia | 30 | ea | sro0_maintenance | 30 | |
| 97 | Tail Sprocket 8 teeth | Tail Sprocket 8 teeth | 100 | ea | sro0_maintenance | 30 | |
| 98 | Conveyor Chain detachable type | Conveyor Chain detachable type | 500 | meter | sro0_maintenance | 30 | |
| 99 | Chain pins | Chain pins | 50 | ea | sro0_maintenance | 30 | |
| 100 | MS 2.5 MTR C CHANNEL FOR CONVEYOR | MS 2.5 MTR C CHANNEL FOR CONVEYOR | 15 | ea | sro0_maintenance | 30 | |
| 101 | Twin arm stopper set with cylinder | Twin arm stopper set with cylinder | 3 | ea | sro0_maintenance | 30 | |
| 102 | Stopper set arrow type right angle stopper | Stopper set arrow type right angle stopper | 6 | ea | sro0_maintenance | 30 | |
| 103 | WT24-2X400 Diffuse Sensor SICK | WT24-2X400 Diffuse Sensor SICK | 3 | ea | sro0_maintenance | 30 | |
| 104 | WL24X430 Reflective Sensor sick | WL24X430 Reflective Sensor sick | 2 | ea | sro0_maintenance | 30 | |
| 105 | WLL24X430 Optical sensor SICK | WLL24X430 Optical sensor SICK | 1 | ea | sro0_maintenance | 30 | |
| 106 | SXE 9561 A86 00 Solenoid valve with coil NORGREN | SXE 9561 A86 00 Solenoid valve with coil NORGREN | 5 | ea | sro0_maintenance | 30 | |
| 107 | Kosan Loadcell Flintec PC6 200Kg | Kosan Loadcell Flintec PC6 200Kg | 5 | ea | sro0_maintenance | 30 | |
| 108 | 40 MM BORE MS idler shaft 500 mm | 40 MM BORE MS idler shaft 500 mm | 5 | ea | sro0_maintenance | 30 | |
| 109 | 40 MM BORE MS idler shaft 400 mm | 40 MM BORE MS idler shaft 400 mm | 7 | ea | sro0_maintenance | 30 | |
| 110 | 40 mm Bore MS idler shaft 380 mm | 40 mm Bore MS idler shaft 380 mm | 5 | ea | sro0_maintenance | 30 | |
| 111 | 40 mm Bore MS idler shaft 350 mm | 40 mm Bore MS idler shaft 350 mm | 7 | ea | sro0_maintenance | 30 | |
| 112 | 40 mm Bore MS idler shaft 300 mm | 40 mm Bore MS idler shaft 300 mm | 7 | ea | sro0_maintenance | 30 | |
| 113 | STUD W NUT IS1363 CS M16x100MM | STUD W/NUT IS1363 CS M16x100MM | 25 | ea | sro0_maintenance | 30 | |
| 114 | BOLTS ALLEN HEAD A193 GR B7 M6X30MM | BOLTS ALLEN HEAD A193 GR B7 M6X30MM | 20 | ea | sro0_maintenance | 30 | |
| 115 | M6 x 35 CSK Allen Bolt and Nut HT MS | M6 x 35 CSK Allen Bolt and Nut HT MS | 20 | ea | sro0_maintenance | 30 | |
| 116 | BOLT ALLEN HD AS IS367 M8x30mm | BOLT ALLEN HD AS IS367 M8x30mm | 20 | ea | sro0_maintenance | 30 | |
| 117 | M8 x 35 CSK Allen Bolt and Nut HT MS | M8 x 35 CSK Allen Bolt and Nut HT MS | 20 | ea | sro0_maintenance | 30 | |
| 118 | BOLT HExHD CS IS 1367 M10x40mm | BOLT HExHD CS IS 1367 M10x40mm | 50 | ea | sro0_maintenance | 30 | |
| 119 | HEX NUT M10 IS1367 CL 4 | HEX NUT M10 IS1367 CL 4 | 25 | ea | sro0_maintenance | 30 | |
| 120 | 12 MM X 40 MM NUTWITH DOUBLE WASHER BOLT | 12 MM X 40 MM NUTWITH DOUBLE WASHER BOLT | 25 | kg | sro0_maintenance | 30 | |
| 121 | SS lock nut 6mm 40mm long nut and bolt | SS lock nut 6mm 40mm long nut and bolt | 25 | ea | sro0_maintenance | 30 | |
| 122 | SS lock nut 8mm 40mm long nut and bolt | SS lock nut 8mm 40mm long nut and bolt | 15 | ea | sro0_maintenance | 30 | |
| 123 | MS Nut Bolt For Conveyor Teflon | MS Nut Bolt For Conveyor Teflon | 50 | ea | sro0_maintenance | 30 | |
| 124 | Boom Drive pinion | Boom Drive pinion | 4 | ea | sro0_maintenance | 30 | |
| 125 | Boom drive shaft | Boom drive shaft | 2 | ea | sro0_maintenance | 30 | |
| 126 | Anchor bolt 10 x125 | Anchor bolt 10 x125 | 50 | ea | sro0_maintenance | 30 | |
| 127 | Anker bolt 12 x125 | Anker bolt 12 x125 | 25 | ea | sro0_maintenance | 30 | |
| 128 | Anker bolt 16 x150 | Anker bolt 16 x150 | 20 | ea | sro0_maintenance | 30 | |
| 129 | Dead weights pair | Dead weights pair | 3 | ea | sro0_maintenance | 30 | |
| 130 | BEND TAPER STRIP 90 DEG CS CONVEYOR INNER 1550MM | BEND TAPER STRIP 90 DEG CS CONVEYOR INNER 1550MM | 5 | ea | sro0_maintenance | 30 | |
| 131 | BEND TAPER STRIP 90 DEG CS CONVEYOR OUTER 1850MM | BEND TAPER STRIP 90 DEG CS CONVEYOR OUTER 1850MM | 5 | ea | sro0_maintenance | 30 | |
| 132 | TAPER FLAT CONVEYOR INTECH OUTER 13BY 8X32X1850MM | TAPER FLAT CONVEYOR INTECH OUTER 13BY 8X32X1850MM | 5 | ea | sro0_maintenance | 30 | |
| 133 | TAPER FLAT CONVEYOR INTECH INNER 13BY 8X32X1850MM | TAPER FLAT CONVEYOR INTECH INNER 13BY 8X32X1850MM | 5 | ea | sro0_maintenance | 30 | |
| 134 | MS Angle for Conveyor | MS Angle for Conveyor | 50 | m | sro0_maintenance | 30 | |
| 135 | PRESSURE GAUGE G F SS 304 10kg DIA 4inch | PRESSURE GAUGE G F SS 304 10kg DIA 4inch | 5 | ea | sro0_maintenance | 30 | |
| 136 | PRESSURE GAUGE G F SS 304 16kg DIA 4 inch | PRESSURE GAUGE G F SS 304 16kg DIA 4 inch | 5 | ea | sro0_maintenance | 30 | |
| 137 | PRESSURE GAUGE G F SS 304 28kg DIA 6 inch | PRESSURE GAUGE G F SS 304 28kg DIA 6 inch | 5 | ea | sro0_maintenance | 30 | |
| 138 | PRESSURE GAUGE G F SS 304 28kg DIA 4 inch | PRESSURE GAUGE G F SS 304 28kg DIA 4 inch | 5 | ea | sro0_maintenance | 30 | |
| 139 | vaccum gauge 0 760 to 1kg dial 4 inch | vaccum gauge 0 760 to 1kg dial 4 inch | 2 | ea | sro0_maintenance | 30 | |
| 140 | TEMPERATURE GAUGE SS 304 0 to 200C DIA-4 inch P | TEMPERATURE GAUGE SS 304 0 to 200C DIA-4 inch P | 2 | ea | sro0_maintenance | 30 | |
| 141 | CVT HEADS | CVT HEADS | 1 | ea | sro0_maintenance | 30 | |
| 142 | CVT Gun seal kit | CVT Gun seal kit | 2 | ea | sro0_maintenance | 30 | |
| 143 | LPG hose for carousel 1000mm length as per IOCsample | LPG hose for carousel 1000mm length as per IOCsample | 10 | ea | sro0_maintenance | 30 | |
| 144 | LPG hose for carousel 800mm length as per IOCsample | LPG hose for carousel 800mm length as per IOCsample | 10 | ea | sro0_maintenance | 30 | |
| 145 | 1 by 2inch x 2mts teflon hose with S S and as | 1 by 2inch x 2mts teflon hose with S S and as | 1 | ea | sro0_maintenance | 30 | |
| 146 | 1 by 2inch x 600mm teflon hose with S S and a | 1 by 2inch x 600mm teflon hose with S S and a | 2 | ea | sro0_maintenance | 30 | |
| 147 | WD 40 Spray 450ml | WD 40 Spray 450ml | 2 | ea | sro0_maintenance | 30 | |
| 148 | NORD GEAR BOX COUPLING 3HP | NORD GEAR BOX COUPLING 3HP | 5 | ea | sro0_maintenance | 30 | |
| 149 | NORD GEAR BOX COUPLING 5 HP | NORD GEAR BOX COUPLING 5 HP | 5 | ea | sro0_maintenance | 30 | |
| 150 | 1 by 2 inch INCH BALL VALVE HEAVY DUTY | 1 by 2 inch INCH BALL VALVE HEAVY DUTY | 5 | ea | sro0_maintenance | 30 | |
| 151 | 1inch INCH BALL VALVE HEAVY DUTY | 1inch INCH BALL VALVE HEAVY DUTY | 5 | ea | sro0_maintenance | 30 | |
| 152 | GUNS OF HOT AIR SEALING MACHINE | GUNS OF HOT AIR SEALING MACHINE | 2 | ea | sro0_maintenance | 30 | |
| 153 | TYRE AND RIM CAROUSEL M and P | TYRE AND RIM CAROUSEL M and P | 1 | ea | sro0_maintenance | 30 | |
| 154 | Tube 3 50 08 | Tube 3 50 08 | 1 | ea | sro0_maintenance | 30 | |
| 155 | RUBBER MAT 1 MTR X 2 MTR X 25 MM THICK | RUBBER MAT 1 MTR X 2 MTR X 25 MM THICK | 5 | ea | sro0_maintenance | 30 | |
| 156 | FLP Elec limit switch Baliga 10A FLS 2113 | FLP Elec limit switch Baliga 10A FLS 2113 | 5 | ea | sro0_maintenance | 30 | |
| 157 | 5 by 2 Solenoid Valve with Coil 230V Rotex Size 1 by 4 inch, Rotex | 5 by 2 Solenoid Valve with Coil 230V Rotex Size 1 by 4 inch, Rotex | 5 | ea | sro0_maintenance | 30 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Live AI
Historical Data
Required Documents
1
GST registration certificate
2
Permanent Account Number (PAN) card
3
Experience certificates for similar supply of BOQ items
4
Financial statements or solvency proof
5
EMD/Security deposit documentation (as per ATC)
6
Technical bid documents and compliance certificates
7
OEM authorizations (if applicable) and any ATC-specified certifications
Frequently Asked Questions
Key insights about KERALA tender market
What documents are required for IOCL Kollam tender submission in 2026?
Bidders must submit GST registration, PAN, experience certificates, financial statements, EMD documentation per ATC, technical bid documents, and OEM authorizations if applicable. The ATC specifies any additional bidder qualifications; ensure all documents reflect current validity and match BOQ item scope.
How does the 25% quantity option affect delivery timelines for IOCL Kollam tender?
The option clause lets IOCL increase or decrease bid quantity by up to 25% at contracted rates. Delivery extensions are calculated as (Additional quantity ÷ Original quantity) × Original delivery period, with a minimum extension of 30 days, starting after the original delivery date.
What are the essential eligibility criteria for IOCL Marketing Division procurement?
Applicants must meet financial stability via statements, demonstrate experience in similar supply, provide GST and PAN, and comply with ATC terms. The specific item-level requirements are in the ATC document uploaded by IOCL; bidders should verify OEM authorizations if required.
Where can bidders find the ATC and BOQ details for this IOCL tender?
The ATC document is uploaded in the tender portal alongside the BOQ. Bidders should download the ATC to confirm exact technical, delivery, and payment terms, along with any brand or certification requirements and LD provisions.
What is the estimated contract value for the IOCL Kollam tender 2026?
The estimated value is ₹2,071,749.29. This figure indicates the scale of procurement across 157 BOQ items. Bidders should align pricing to this scope and anticipate quantity variability per the 25% option clause.
What delivery terms apply to IOCL procurement in Kollam under this tender?
Delivery commences from the last date of the original delivery order. If extended, the additional time follows the option clause, with a minimum 30-day extension. Final delivery deadlines depend on the original period and contract execution per ATC.
Similar Tenders
5 found
Urgent
Procurement Opportunity: SUPPLY OF PRESSURE CONNECTOR in PALAKKAD, KERALA
Instrumentation Ltd ( Govt of India Enterprise)
📍 PALAKKAD, KERALA
⏰ Deadline: 2 days left
🛒 Type: Goods
View
EPROCURE
Urgent
PIPE COUPLING, END PLUGS, SCREWS DRG. NO. N15-11 M18X1.5.,PLUG, END, SCREWED, DRG. NO. N15-11 M12X1
Armoured Vehicles Nigam Limited
📍 THANE, MAHARASHTRA
⏰ Deadline: 6 days left
🛒 Type: Goods
View
GEM
Urgent
SCREW VOLUMETER: OMG 20 WITH PICK OF SENSOR BEG 45 & BEV 13 AND PANEL MOUNTABLE FRU -7000 MTRD,SPAR
Office Of Dg (ace)
📍 CHENNAI, TAMIL NADU
⏰ Deadline: 7 days left
🛒 Type: Goods
View
GEM
Urgent
SCREW B1M4.8h6hX16.48. 016 GOST 17473-80
Armoured Vehicles Nigam Limited
📍 MEDAK, TELANGANA
⏰ Deadline: 1 day left
🛒 Type: Goods
View
GEM
Urgent
Open Tender for Supply of Screw Conveyor Assy., Helix and Hot air box for Ball Tube Mills BBD 4772 of Unit # 1 to 4 CTPP, Chhabra for year 2026-27 in BARAN, RAJASTHAN
RRVUN - CMD
📍 BARAN, RAJASTHAN
EMD: ₹1.4 L
Est: ₹69.3 L
⏰ Deadline: 7 days left
🛒 Type: Goods
View
EPROCURE
Explore More Opportunities
Quick Access
Unlock Tender Documents
Sign up now to access all documents
Performance Analytics
7-metric analysis with year-wise breakdown
Competitor Intelligence
Multi-dimensional analysis across 6 parameters
Market Penetration
By department, ministry, geography & category
Historical Analysis
Complete tender history with results
Documents 6
GeM-Bidding-9306481.pdf
Main Document
Other Documents
OTHER
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS