Office Of Dg (ace) Lathe Machine Tender IS 6893:1988 IS 210 Latest 2026
Bid Publish Date
12-Aug-2026, 11:23 am
Bid End Date
01-Sep-2026, 3:00 pm
EMD
₹1,32,750
Location
Progress
Key Highlights
- • IS 6893-1988 latest standard compliance for lathe evaluation
- • IS 210 latest for casting material compliance
- • EMD ₹132,750; SITC scope including installation and commissioning
- • OEM warranty certificates required; 1-year warranty
- • AMC rate and period to be offered; post-sales service network in INDIA
- • Erection/commissioning charges included in offered prices without foundation
- • ATC clause: IP address matching may lead to bid rejection
- • Service centers near consignee locations must be uploaded with bid
Tender Overview
Office Of Dg (ace), under the Department Of Defence Research & Development, invites bids for a Lathe Machine conforming to IS 6893-1988 Latest for technical evaluation and IS 210 Latest for casting. The scope covers Supply, Installation, Testing and Commissioning with EMD ₹132,750 and a 1-year warranty. Bidder must demonstrate OEM support with installation/commissioning capability in India and provide service centers near consignee locations. The tender emphasizes compliance with identified standards and comprehensive after-sales support, including AMC terms. This procurement targets a precise lathe type and bed/slide configurations, with electrical and foundation-excluded erection charges included in prices.
Key differentiators include explicit adherence to IS standards, mandatory OEM warranties, and on-site commissioning requirements, supported by verified post-sale troubleshooting and maintenance resources. The absence of BOQ items suggests a single-lot equipment purchase with detailed performance parameters to be verified during technical evaluation. The opportunity is positioned to suppliers capable of delivering a fully-supported lathe solution with strong service coverage in India.
Technical Specifications & Requirements
- Lathe Machine must confirm to IS 6893-1988 (latest for evaluation) and IS 210 (latest) for casting purposes.
- Performance parameters include: Lathe Type; Duty type; Distance Between Centers x Swing over Bed; Swing Over Bed; Center Height; Swing Over Cross Slide; Swing Over Carriage Wing; Gap dimensions; Bed type, length, width; Weight between chuck/live center and dead center; Spindle torque and spindle size; Chuck type; Cross/Top slide travel; Main motor power; Power supply type; Coolant pump output per IS 2161:1962.
- Additional specs: Erection & Commissioning charges included, 1-year warranty, AMC details and period; coolant pump power; Minimum/Maximum chucking diameters; tailstock sleeve diameter and travel specifics; overall lathe dimensions (L x W x H) and weight with accessories.
- OEM warranty certificates must accompany delivery; service centers must be documented near consignee locations.
Terms, Conditions & Eligibility
- EMD: ₹132,750; payment terms to be specified in the bid.
- Warranty: 1 year from final acceptance/installation; OEM warranty certificates required at delivery.
- Scope: Supply, Installation, Testing and Commissioning (SITC) with on-site training and maintenance support.
- AMC: Annual Maintenance Contract rate to be offered; period to be specified.
- Documentation: Submit GST, PAN, experience certificates, financial statements, EMD proof, OEM authorizations, and technical compliance certificates.
- After-sales: Strong service network in India; detail service centers near consignee destinations to be uploaded with bid.
- ATC/IP considerations: Bids with matching common IP addresses risk rejection per buyer ATC.
- Delivery & Installation: Erection/commissioning charges included in price; foundation not included.
Key Specifications
-
Product: Lathe Machine conforming to IS 6893:1988 (latest for evaluation) and IS 210 (latest) for casting
-
Performance: Distance Between Centers x Swing Over Bed; Center Height; Swing Over Bed; Chuck type; spindle size; spindle torque
-
Dimensions: Length, Width, Height; Weight with accessories; Maximum/Minimum chucking diameter
-
Electrical: Main motor power (kW); Type of power supply; coolant pump output (kW per IS 2161:1962)
-
Other: Erection & Commissioning charges included; 1-year OEM warranty; AMC terms; service center network in India
Terms & Conditions
-
EMD amount ₹132,750 with stipulated payment terms to be detailed in the tender
-
SITC scope includes on-site installation, testing and commissioning; erection charges included
-
Warranty is 1 year from final acceptance; OEM certificates required at delivery
Important Clauses
Payment Terms
Details to be provided in bid; typically includes milestones such as supply, SITC, and acceptance with standard terms
Delivery Schedule
Delivery times and on-site commissioning window to be specified; erection charges included in bid price
Penalties/Liquidated Damages
Penalties, if any, will be defined in contract; ensure adherence to installation and commissioning timeline
Bidder Eligibility
-
Proven experience in supplying and commissioning lathe machines
-
Financial capability to support EMD and project requirements
-
Authorized OEM representation or valid OEM authorization letter
Tender Data
Bid Details
Quantity
1
Bid Type
Two Packet Bid
Bid Validity
180 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
Yes
Tech Clarification Time
3 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
No
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Warranty Period
1 years
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Lathe Machine as per IS 6893:1988 (Q2)
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
18
Delivery Details
Max Delivery Days
120
Delivery Locations
1
Delivery Cities
NASHIK RURAL
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | NASHIK RURAL | NASHIK RURAL | - | - | 1 | 120 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
GeM-Bidding-9737507.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Categories
4
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
GST certificate
PAN card
Experience certificates showing relevant lathe procurement/installation work
Financial statements (profit & loss, balance sheet for past 3 years)
EMD submission document (₹132,750) via online or DD as applicable
Technical bid documents confirming IS 6893:1988 and IS 210 compliance
OEM authorization letters from lathe manufacturer (if bidder is not OEM)
Certificates of warranty and after-sales service capabilities, including local service centers
Any prior installation/test certificates from similar projects
Technical Specifications
1 Item
Item #1 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| Standards | Lathe Machine Confirming to IS 6893-1988 Latest (For Technical Evaluation) | Yes |
| Standards | Lathe Machine Material Confirming to IS 210 Latest(For Casting ) | Yes |
| Performance Parameters | Lathe Machine Type | Center Lathe |
| Performance Parameters | Nature of Duty of Operation of Lathe | Heavy Duty Lathe |
| Performance Parameters | Distance Between centers (mm) x Swing over Bed (mm) | 1000 x 300 |
| Performance Parameters | Swing Over Bed (in mm) | Any applicable numeric value |
| Performance Parameters | Center Height in mm | Any applicable numeric value |
| Performance Parameters | Swing Over Cross Slide in mm | Any applicable numeric value |
| Performance Parameters | Swing Over Carriage Wing in mm | Any applicable numeric value |
| Performance Parameters | Swing in Gap in mm | Any applicable numeric value |
| Performance Parameters | Width of Gap in Front in mm | Any applicable numeric value |
| Performance Parameters | Type of Bed | Flat Shaped, Inverted V type |
| Performance Parameters | Length of Bed in mm | Any applicable numeric value |
| Performance Parameters | Width of Bed in mm | Any applicable numeric value |
| Performance Parameters | Gap in Bed in mm ( Only for Gap Lathe ) for rest Put 0 | Any applicable numeric value |
| Performance Parameters | Rapid Transverse of saddle & Cross Slide | Yes, No |
| Performance Parameters | Maximum Feed Force | 270 |
| Performance Parameters | Maximum Facing Diameter in mm | Any applicable numeric value |
| Performance Parameters | Maximum Weight of work piece that can be held between chuck and supported by Live center in kg | Any applicable numeric value |
| Performance Parameters | Maximum Weight of work piece that can be held between chuck and supported by dead center in kg | Any applicable numeric value |
| Performance Parameters | Maximum Torque on Spindle in NM | Any applicable numeric value |
| Performance Parameters | Size of Spindle in mm | Any applicable numeric value |
| Performance Parameters | Type of Chuck | 3 Jaw Self Centered, 4 Jaw Independent, Specialty Jawed Type |
| Performance Parameters | Travel of Cross Slide in mm | Any applicable numeric value |
| Performance Parameters | Travel of Top Slide in mm | Any applicable numeric value |
| Performance Parameters | Main Motor Power in kw | Above 3 |
| Performance Parameters | Types of power supply | 3 Phase |
| Performance Parameters | Erection and Commisioning Charges included in Offered Prices without Foundation | Yes |
| Performance Parameters | Warranty in Years | 1, 2, 3, 4, 5 |
| Performance Parameters | Annual Maintenance Contract Rate included for Machine | Yes, No |
| Performance Parameters | Period of AMC | 0, 1, 2, 3, 4, 5 |
| Performance Parameters | Coolant Pump output in kw as per IS 2161:1962 Latest | 0.12, 0.18, 0.25, 0.37, 0.5, 0.75, 1.1, 2, 4, 5.5 |
| Dimensional Parameters | Minimum Chucking Diameter in mm | Any applicable numeric value |
| Dimensional Parameters | Maximum Chucking Diameter in mm | Any applicable numeric value |
| Dimensional Parameters | Tail Stock Sleeve Diameter in mm | Any applicable numeric value |
| Dimensional Parameters | Maximum Offset of Tailstock on either side of Center Line in mm | Any applicable numeric value |
| Dimensional Parameters | Sleeve Travel Type(Tail Stock) | Manual, Power Operated |
| Dimensional Parameters | Length of Lathe Machine in mm | Any applicable numeric value |
| Dimensional Parameters | Width of Lathe Machine in mm | Any applicable numeric value |
| Dimensional Parameters | Height of Lathe Machine in mm | Any applicable numeric value |
| Dimensional Parameters | Weight of Lathe Machine with electrical and standards Accessories | Any applicable numeric value |
Frequently Asked Questions
Key insights about MAHARASHTRA tender market
How to bid for the lathe machine tender in Rajasthan 2026
Bidders must submit GST, PAN, experience certificates, financial statements, EMD ₹132,750, OEM authorizations, and technical compliance documents. Ensure IS 6893:1988 and IS 210 compliance, provide on-site SITC capability, and demonstrate a national service network with installation training. Final acceptance triggers warranty compliance.
What documents are required for lathe equipment procurement in India
Submit GST certificate, PAN card, company financials, three years experience certificates of similar projects, EMD receipt, OEM authorization, and technical bids detailing IS 6893 and IS 210 compliance, plus service center details. Include warranty certificates and AMC rates if offered.
What are the technical standards for the lathe tender in India
Lathe must meet IS 6893:1988 (latest for evaluation) and IS 210 (latest for casting). Provide documentation from OEM showing compliance, along with performance specs like distance between centers, bed dimensions, spindle torque, and motor power.
When is the delivery and commissioning deadline for the lathe
Delivery and on-site commissioning must be completed within the project timeline specified in the contract. The bid includes erection and commissioning charges; ensure your project plan covers SITC activities and onsite training within the agreed window.
What are the warranty and AMC requirements for the lathe
Warranty is 1 year from final acceptance. OEM warranty certificates must be submitted at delivery. AMC rates and duration should be proposed in the bid; ensure service centers are mapped near consignee locations for prompt support.
What qualification criteria demonstrate eligibility for the lathe bid
Demonstrate prior LATHE procurement/installation experience, provide three-year financial statements, present OEM authorization if not an OEM, and show Indian service network coverage. Bid must include IS 6893/IS 210 compliance proofs and necessary performance data.
How to verify OEM support and service centers for the lathe
Request OEM authorization letters, provide list of Indian service centers with contact details, and include service response times. The bid should demonstrate installation, commissioning, training, troubleshooting capabilities and spare parts availability near consignee locations.
What are the essential performance parameters for the lathe model
Key specs include Distance Between Centers, Swing Over Bed, Center Height, Swing Over Cross Slide, Bed type, spindle torque, spindle size, chuck type, motor power, and coolant pump output per IS 2161:1962. Provide exact figures for each parameter in the technical bid.