Bid Publish Date
15-Apr-2025, 4:09 pm
Bid End Date
15-May-2025, 3:00 pm
EMD
₹1,13,380
Value
₹1,13,37,880
Location
Progress
Quantity
31514
Bid Type
Two Packet Bid
Uranium Corporation Of India Limited announces a tender for Vitrified tiles laid with cement based high polymer, Vitrified tiles laid with cement mortar, ceramic glazed wall tiles, Grouting the joints of flooring tiles, Providing and fixing aluminium work -For shutters of doors, windows, Providing and fixing aluminium work- For fixed portion Powder coated aluminium, Providing and fixing 12 mm thick prelaminated particle board, Providing and fixing glazing - With float glass panes of 4. 0 mm thickness, Providing and laying Structural steel work riveted, 24 mm thick factory made PVC door shutters, 35mm thick ISI marked flush door, Providing and fixing in position collapsible steel shutters, Providing and fixing 18mm thick pre-laminated medium density fibre board, Providing sal wood work in frames, Providing and fixing 15mm normal bore G. I. Union, Providing and fixing 20mm normal bore G. I. Union, Providing and fixing white vitreous china pedestal type water closet, Providing and fixing water closet squatting pan, Providing and fixing wash basin with C. I. brackets, Providing and fixing white vitreous china urinal basin, Providing and fixing one piece construction white vitreous china squatting plate, Providing and fixing 600x450mm bevelled edge mirror, Providing and fixing 600x120x5 mm glass shelf, Providing and fixing PTMT towel rail complete with brackets, Providing and fixing PTMT liquid soap container, Providing and fixing 15 mm bided or jet spray, Providing and fixing C. P. brass shower rose, Providing and fixing C. P. brass stop cock, Providing and fixing C. P brass close hole wall mixer tap, Providing and fixing 15 mm nominal bore C. P brass angle valve, 75 mmwaste and vent pipes, 100 mm waste and vent pipes, Providing and fixing C. P. brass bib cock, Demolishing cement concrete, Dismantling old plaster or skirting raking out joints, Providing and laying plain Cement concrete 1 is to 3 is to 6, Providing and laying in position cement concrete of 1 is to 2 is to 4, Providing and laying 1st class brick work with bricks of class designation 75, Half brick masonry with common burnt clay, Providing and laying 12 mm thick cement plaster 1 is to 6, Providing and applying two coats of white washing with lime on old work, Providing and applying white cement based putty, Providing and applying one coat of cement primer, Providing and applying wall painting, Supplying and laying Two or more Coats Painting with synthetic enamel paint, Earth work in excavation in foundation, , Providing and fixing centering and shuttering, Providing and fixing 18 mm thick granite in EAST SINGHBHUM, JHARKHAND. Quantity: 31514. Submission Deadline: 15-05-2025 15: 00: 00. Last date to apply is approaching fast!
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS
Envis Centres (environmental Information System) Ministry Of Environment Forest And Climate Change
DODA, JAMMU & KASHMIR
Ai Airport Services Limited
MUMBAI, MAHARASHTRA
Border Road Organisation
TINSUKIA, ASSAM
Indian Navy
Indian Army
LUCKNOW, UTTAR PRADESH
Tender Results
Loading results...
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) |
|---|---|---|---|---|---|---|
| 1 | Vitrified tiles laid with cement based high polymer | Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer with water absorption less than 0.08 percent and conforming to IS - 15622 of approved brand and manufacturer in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS - 15477, in average 6 mm thickness, including grouting of joints -Payment for grouting of joints to be made separately . Size of Tile 600x600 mm sqm 1240.60 | 2,300 | sqm | dgmauto | 244 |
| 2 | Vitrified tiles laid with cement mortar | Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer with water absorption less than 0.08 percent and conforming to IS - 15622 of approved make in all colours and shade in skirting riser of steps over 12 mm thick bed of cement mortar 1 isto 3 1 cement isto 3 coarse sand jointing with grey cement slurry at the rate 3.3kg per sqm including grouting the joint with white cement and matching pigments etc. complete . Size of Tile 600x600 mm or as per instruction of Engineer - in - charge. | 560 | sqm | dgmauto | 244 |
| 3 | ceramic glazed wall tiles | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS isto 15622 thickness to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement isto 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade all complete as per specification and instruction of Engineer - in - charge. | 600 | sqm | dgmauto | 244 |
| 4 | Grouting the joints of flooring tiles | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm sqm | 2,300 | sqm | dgmauto | 244 |
| 5 | Providing and fixing aluminium work -For shutters of doors, windows | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS - 733 and IS - 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) - (a) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) | 750 | kg | dgmauto | 244 |
| 6 | Providing and fixing aluminium work- For fixed portion Powder coated aluminium | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS - 733 and IS - 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) - (b) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) | 650 | kg | dgmauto | 244 |
| 7 | Providing and fixing 12 mm thick prelaminated particle board | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS - 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides | 100 | sqm | dgmauto | 244 |
| 8 | Providing and fixing glazing - With float glass panes of 4.0 mm thickness | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item) - With float glass panes of 4.0 mm thickness | 200 | sqm | dgmauto | 244 |
| 9 | Providing and laying Structural steel work riveted | Providing and laying Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 650 | kg | dgmauto | 244 |
| 10 | 24 mm thick factory made PVC door shutters | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm Plus minus 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M S galvanised or plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws . The styles of the shutter reinforced by inserting galvanized M S tube of size 20x20 mm and 1 mm Plus minus 0.1 mm wall thickness . The lock rail made up of H section a uPVC hollow section of size 100x24 mm and 2 mm Plus minus 0.2 mm wall thickness fixed to the shutter styles by means of plastic or galvanised M.S U cleats . The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm , having over all thickness of 20 mm and 1 mm Plus minus 0.1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S rod and fastened with nuts and washers , complete as per manufacturer specification and direction of Engineer - in - charge . For W. C and bathroom door shutter. | 36 | sqm | dgmauto | 244 |
| 11 | 35mm thick ISI marked flush door | Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS - 2202 Part I non decorative type , core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - sizes including fixing the handles / hinges/ tower bolt/ aldrops etc. wherever necessary. All the serviceable fittings of dismantled door shutter should be removed and refitted in the new door shutter other required fittings are to be supplied by the Contractor. | 50 | sqm | dgmauto | 244 |
| 12 | Providing and fixing in position collapsible steel shutters | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. | 30 | sqm | dgmauto | 244 |
| 13 | Providing and fixing 18mm thick pre-laminated medium density fibre board | Providing and fixing 18mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS -14587-1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS - 3818 marked with necessary screw etc all complete. | 20 | sqm | dgmauto | 244 |
| 14 | Providing sal wood work in frames | Providing sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately). | 1 | cum | dgmauto | 244 |
| 15 | Providing and fixing 15mm normal bore G.I. Union | Providing and fixing 15mm normal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) | 300 | metre | dgmauto | 244 |
| 16 | Providing and fixing 20mm normal bore G.I. Union | Providing and fixing 20mm normal bore G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) | 100 | metre | dgmauto | 244 |
| 17 | Providing and fixing white vitreous china pedestal type water closet | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS - 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid | 14 | each | dgmauto | 244 |
| 18 | Providing and fixing water closet squatting pan | Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS - 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required - White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | 10 | each | dgmauto | 244 |
| 19 | Providing and fixing wash basin with C.I. brackets | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required - White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps . | 9 | each | dgmauto | 244 |
| 20 | Providing and fixing white vitreous china urinal basin | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required - Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern | 3 | set | dgmauto | 244 |
| 21 | Providing and fixing one piece construction white vitreous china squatting plate | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required - Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern | 2 | set | dgmauto | 244 |
| 22 | Providing and fixing 600x450mm bevelled edge mirror | Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (All materials supplied by the contractor) (Make Modi Guard) | 9 | each | dgmauto | 244 |
| 23 | Providing and fixing 600x120x5 mm glass shelf | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | 9 | each | dgmauto | 244 |
| 24 | Providing and fixing PTMT towel rail complete with brackets | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. | 9 | each | dgmauto | 244 |
| 25 | Providing and fixing PTMT liquid soap container | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms | 22 | each | dgmauto | 244 |
| 26 | Providing and fixing 15 mm bided or jet spray | Providing and fixing 15 mm bided/jet spray (Make OMCO) with all fitting and fixtures including all complete as per specification and instruction of Engineer- in-charge . | 13 | each | dgmauto | 244 |
| 27 | Providing and fixing C.P. brass shower rose | Providing and fixing C.P. brass shower rose with 15 or 20mm inlet (C.P. shower rose supplied by the contractor) Make - OMCO 100 MM diameter. | 15 | each | dgmauto | 244 |
| 28 | Providing and fixing C.P. brass stop cock | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make to conforming to IS - 8931. | 35 | each | dgmauto | 244 |
| 29 | Providing and fixing C.P brass close hole wall mixer tap | Providing and fixing C.P brass close hole wall mixer tap of approved quality and make, including all complete as per specification and instruction of Engineer- in-charge. | 5 | each | dgmauto | 244 |
| 30 | Providing and fixing 15 mm nominal bore C.P brass angle valve | Providing and fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality including all complete as per specification and instruction of Engineer- in-charge. | 30 | each | dgmauto | 244 |
| 31 | 75 mmwaste and vent pipes | Providing and fixing soil , waste and vent pipes including all complete as per specification and instruction of Engineer -in - charge -75mm dia Sand cast iron S and S pipe as per IS - 1729 | 50 | rm | dgmauto | 244 |
| 32 | 100 mm waste and vent pipes | Providing and fixing soil waste and vent pipes including all complete as per specification and instruction of Engineer -in-charge - 100mm dia Sand cast iron S and S pipe as per IS - 1729 | 50 | rm | dgmauto | 244 |
| 33 | Providing and fixing C.P. brass bib cock | Providing and fixing C.P. brass bib cock of approved quality conforming to IS - 8931 15 mm nominal bore . | 45 | each | dgmauto | 244 |
| 34 | Demolishing cement concrete | Demolishing cement concrete including disposal of materials, within 50M lead. Concrete mix. 1 / 3 /6 (Cement concrete or richer mix.) | 60 | cum | dgmauto | 244 |
| 35 | Dismantling old plaster or skirting raking out joints | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50M lead. | 2,900 | sqm | dgmauto | 244 |
| 36 | Providing and laying plain Cement concrete 1 is to 3 is to 6 | Providing and laying plain Cement concrete 1/3/6 (1 cement / 3 coarse sand / 6 graded stone aggregate 40mm nominal size) in foundation, Plinth wherever necessary including desalinating, finishing, Curing etc. as per specification all complete but excluding the cost of centering and shuttering etc. | 45 | cum | dgmauto | 244 |
| 37 | Providing and laying in position cement concrete of 1 is to 2 is to 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1 / 2 /4 (1 cement/2 coarse sand / 4 graded stone aggregate 20mm nominal size) | 17 | cum | dgmauto | 244 |
| 38 | Providing and laying 1st class brick work with bricks of class designation 75 | Providing and laying 1st class brick work with bricks of class designation 75 in foundation and plinth in cement mortar 1/6 (1 cement / 6 coarse sand) including all complete as per specification drawing and direction of the Engineer-in-charge. | 5 | cum | dgmauto | 244 |
| 39 | Half brick masonry with common burnt clay | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1/4 (1 cement / 4 coarse sand) | 30 | sqm | dgmauto | 244 |
| 40 | Providing and laying 12 mm thick cement plaster 1 is to 6 | Providing and laying 12 mm thick cement plaster 1/6 (1 cement / 6 fine sand) all complete as per specifications. All materials including cement etc. to be supplied by the contractor. | 720 | sqm | dgmauto | 244 |
| 41 | Providing and applying two coats of white washing with lime on old work | Providing and applying two coats of white washing with lime on old work as per composition mentioned below to give an even shade including scaffolding etc. upto floor four level complete including removing old white wash. (composition - 5 litre water per kg. of lime for making cream fevicol DDL - as per manufacturer recommendation. Robin blue make (P and G) at 5 gm per litre of lime wash.( Lime powders blue. Fevicol DDL will be arranged by contractors) | 1,000 | sqm | dgmauto | 244 |
| 42 | Providing and applying white cement based putty | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the lastered wall surface to prepare the surface even and smooth complete. | 4,900 | sqm | dgmauto | 244 |
| 43 | Providing and applying one coat of cement primer | Providing and applying one coat of cement primer (internal walls surface) of approved brand all complete as per specification and instruction of Engineer- in-charge. | 6,200 | sqm | dgmauto | 244 |
| 44 | Providing and applying wall painting | Providing and applying wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade - Two or more coats . | 6,200 | sqm | dgmauto | 244 |
| 45 | Supplying and laying Two or more Coats Painting with synthetic enamel paint | Supplying and laying Two or more Coats Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade all complete as per specification and instruction of Engineer- in-charge. | 200 | sqm | dgmauto | 244 |
| 46 | Earth work in excavation in foundation, | Earth work in excavation in foundation, trenches or drains not exceeding 1.50M in width or 10.00 SqM on plain including dressing of sites and ramming of bottoms, lift upto 1.50M including getting out the excavated soil and disposal of surplus excavated soil, including dewatering and directed with a lead of 500 M. | 50 | cum | dgmauto | 244 |
| 47 | Providing and fixing centering and shuttering | Providing and fixing centering and shuttering including strutting, propping etc. and removal of form for Foundation, footings, bases of column etc. for mass concrete. | 200 | sqm | dgmauto | 244 |
| 48 | Providing and fixing 18 mm thick granite | Providing and fixing 18 mm thick granite of any size,colour and shade, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1/4 (1 cement / 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. all complete as per specification and instruction of Engineer- in-charge. | 10 | sqm | dgmauto | 244 |
Discover companies most likely to bid on this tender
Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Key insights about JHARKHAND tender market
The eligibility requirements include being a registered entity in construction, demonstrating experience in similar projects, and compliance with local regulations. Bidders must provide relevant licenses and certifications that validate their capability to execute the defined scope of work effectively.
Bidders are required to submit certificates that verify their qualifications, including relevant construction licenses, quality assurance certifications, and any other documentation that supports their capability to deliver the required materials and services per technical specifications.
The registration process involves creating an account on the tender portal, followed by submission of necessary documents as outlined in the tender notice. Bidders must ensure that all registrations are completed well in advance to facilitate a smooth submission of their proposals.
Document submissions must adhere to specified formats often mentioned in the tender guidelines. Typically, PDFs and Excel sheets are preferred for financials while proposals may allow formats such as Word documents. Check the tender document for specific format requirements.
The payment terms typically include scheduled payments based on project milestones, governed by completion percentages of the tasks outlined in the contract. Bidders can propose terms in their bids that align with the deliverables while ensuring compliance with the financial guidelines stipulated in the tender.
Sign up now to access all documents
Main Document
BOQ
BOQ
ATC
GEM_GENERAL_TERMS_AND_CONDITIONS