TenderDekho Logo
GEM

South Eastern Coalfields Limited Goods Supply Tender Korba Chhattisgarh 1 Year Warranty IS 550 Compliant 2025

Bid Publish Date

28-Dec-2025, 1:00 pm

Bid End Date

19-Jan-2026, 1:00 pm

EMD

₹1,000

Value

₹25,59,072

Location

KORBA , CHHATTISGARH

Progress

Issue28-Dec-2025, 1:00 pm
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

1534

Category

Wrench Set Allen Key Set 2mm to 10mm

Bid Type

Two Packet Bid

Key Highlights

  • • OEM authorization required for Authorized Distributors/service providers
  • • 1 year warranty from final acceptance or after installation/commissioning
  • • Delivery quantity variation up to 25% with extended delivery period rules
  • • EMD ₹1,000; online RTGS/internet banking to SECL DIPKA Area
  • • Service center presence in INDIA near consignee destinations
  • • GST applicable and reimbursed as actuals or lower rate

Categories 112

BP INSTRUMENT BREAK DOWN VOLTAGE KIT OPTICAL POWER METER APPARELS VOLTAGE METERS HOT AIR GUN PLATFORM SCALE DECIBEL METER THICKNESS MEASURING DEVICES ANGLE DISPENSING TOOLS ABRASIVE PRODUCT ROTARY DRILL COILED WIRE ANVIL PARAMETER TEST BULB LEVEL GUAGE RING TESTING INSTRUMENT ANGLE GRINDER POWER CABLE LIFTING MAGNET AIR CYLINDERS MICRO METER MEASURING INSTRUMENT HYDRAULIC PULLER WIRING ASSEMBLY MOBIL OIL WHEAT FLOUR HYDRAULIC TOOLS WRENCH AGRICULTURE EQUIPMENT DEMOLITION HAMMER MEASURING EQUIPMENT RADIO FREQUENCY ANALYSER GEYSER BLADE FERROUS ALLOY SUPPLY TOOLS AND GENERAL MACHINERY LIFTING EQUIPMENT ABRASIVE POLISHERS XLPE CABLE WATTMETERS BOX END WRENCHES CLOTHING GRINDER AMC OF ELECTRONIC ELECTRICAL MEASURING INSTRUMENT ARTICULATING LAZY ARMS CHAIN PULLEY BLOCK HYDRAULIC JACK ULTRACENTRIFUGES THICKNESS GAUGE ADJUSTABLE WRENCHES STOMACHERS MAINTENANCE CONTRACT OF ELECTRONIC ELECTRONIC COMMUNICATION MEASURING AND TESTING INSTRUMENT SOCKET DRUM PUMPS DRILL BIT LASER RANGE FINDER ABRASIVE STONES ABRASIVES AND ABRASIVE MEDIA MEGGER PNEUMATIC POSITIONER AUDIOMETERS SWITCH GEAR VOLTMETER GLUCOMETER PAPER MATERIALS PRESSURE GAUGE WEIGH BRIDGE THERMOWELLS AUTOCLAVE AND STERILIZER EQUIPMENT ELECTRICAL MEASURING AND TESTING EQUIPMENT GRASS CUTTING MACHINE SEED AND FEED EQUIPMENT BOX CHAIN PULLEY WATER LEVEL RECORDER VOLT METER WIRE GEAR SNATCH BLOCK BODYWEIGHT MEASURING SCALE CAT WRENCHES AND DRIVERS ROUTINE MAINTENANCE SMART POSITIONER TRANSITION METALS TOOL KIT PYROMETERS IMPACT WRENCH LUBE OIL MACHINE BATTERY VALVE PARTS AND ACCESSORIES GRINDING SANDING AND POLISHING EQUIPMENT PURE ELEMENTAL GASES LIFTING MACHINE HYDRAULIC PEB PULLEY CALIPERS LENGTH THICKNESS AND DISTANCE MEASURING INSTRUMENTS POWER TOOLS MEDICAL DIAGNOSTIC GAMMA CAMERAS POLYMERASE CHAIN REACTION PCR WEIGHTS BARREL JACK

Tender Overview

South Eastern Coalfields Limited (Coal India Limited) invites bids for the supply of goods across 126 BOQ items with an estimated value of ₹2,559,071.90 and an EMD of ₹1,000. Location details point to SECL’s operations likely in the Korba region, Chhattisgarh. The contract allows quantity variation up to ±25% of the bid quantity, with extension logic linked to the original delivery period and a minimum 30-day extension. Bidders must consider GST implications and provide an OEM authorization where applicable. A 1-year warranty from final acceptance or installation applies, with on-ground after-sales support through Indian service centers. The scope is strictly supply-only per the terms.

Technical Specifications & Requirements

  • Items: 126 total; no item-wise specs provided in data; focus on supply of goods at consignee location.
  • Warranty: 1 year from final acceptance or after commissioning; OEM warranty certificates to be submitted at delivery.
  • After-sales: Service centers must be listed with locations near consignee destinations; installation, commissioning and training may be included.
  • EMD/Payment: ₹1,000 EMD; payment via RTGS/Internet banking to SECL, DIPKA AREA; bank details: SBI Korba branch, IFSC SBIN0009343.
  • Delivery: Delivery period linked to original order with possible extension; option clause allows up to 25% quantity variation and related time calculations.
  • Documentation: Manufacturer authorization where distributors supply; GST considerations to be borne by bidder; certificates essential for bid acceptance.

Terms, Conditions & Eligibility

  • EMD: ₹1,000; can be paid online via RTGS/Net banking to the stated SECL account.
  • Warranty: 1 year warranty; need OEM warranty certificates at delivery and demonstration of after-sales capability.
  • Vendor credibility: Must provide OEM authorization; well-established installation, commissioning, training and maintenance capability in India.
  • Delivery terms: Option clause permits up to 25% quantity variation and extended delivery period calculations with a minimum 30-day extension; delivery begins from the last date of the original delivery order.
  • GST: Bidder bears GST impact; reimbursement as per actuals or applicable rate (whichever is lower).
  • Documentation: Upload all required certificates/documents; non-submission may lead to rejection.

Key Specifications

  • 126 BOQ items in total

  • 1 year warranty from final acceptance

  • OEM warranty certificates to be provided at delivery

  • Delivery terms permitting up to 25% quantity variation

  • GST impact borne by bidder with reimbursement terms

  • RTGS/Internet banking required for EMD and payment to SECL

Terms & Conditions

  • Quantity may be increased up to 25% during contract

  • Payment and EMD via online banking to SECL

  • 1-year warranty with OEM certificate submission

Important Clauses

Payment Terms

EMD ₹1,000; payment through RTGS/Internet banking to SECL, DIPKA AREA; GST reimbursement as per actuals or lower rate

Delivery Schedule

Delivery period begins from last date of original delivery order; option clause allows up to 25% quantity variation with extended period calculation

Penalties/Liquidated Damages

Not explicitly stated in data; standard SECL practice applies LD clauses with delivery slippage implications

Bidder Eligibility

  • OEM authorization for supplied goods

  • Demonstrated installation, commissioning and maintenance capability in India

  • Financial and GST compliance with required certificates

Past Similar Tenders (Historical Results)

5 found

Indian Army Department Of Military Affairs Universal Scanning Sensor Tender Jodhpur Rajasthan 2025

Indian Army

JODHPUR, RAJASTHAN

Posted: 23 December 2025
Closed: 2 January 2026
GEM

Indian Army Procurement Tender Leh Jammu & Kashmir 194101 – Socket Set, Star Key Set, Grinding Blade, Spirit Level, Welding Gear & Safety Equipment 2025

Indian Army

LEH, JAMMU & KASHMIR

Posted: 22 December 2025
Closed: 1 January 2026
GEM

Indian Army Procurement: Stanley telecom tool kit, two-way Allen key set and white boards Tender Sri Ganganagar Rajasthan 2025

Indian Army

Sri Ganganagar, RAJASTHAN

Posted: 20 December 2025
Closed: 30 December 2025
GEM

Indian Army Procurement: 7 Tool Kit Items Tender RaJauri Jammu & Kashmir 2025 ISI/ISO Standards

Indian Army

RAJAURI, JAMMU & KASHMIR

Posted: 15 December 2025
Closed: 25 December 2025
GEM

Copper Washer 10MM,Copper Washer 12MM,Copper Washer 13MM,Copper Washer 16MM,Copper Washer 17MM,Copp

Indian Army

LEH, JAMMU & KASHMIR

Posted: 8 December 2025
Closed: 18 December 2025
GEM

Bill of Quantities (BOQ) 126 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Wrench Set Allen Key Set 2mm to 10mm Wrench Set Allen Key Set 2mm to 10mm 5 set am.mm@dpk 60
2 Allen Wrench 12mm Allen Wrench 12mm 5 nos am.mm@dpk 60
3 Allen Wrench 17mm Allen Wrench 17mm 4 nos am.mm@dpk 60
4 Allen Wrench 19mm Allen Wrench 19mm 4 nos am.mm@dpk 60
5 Allen Wrench 22mm Allen Wrench 22mm 4 nos am.mm@dpk 60
6 Adjustable Wrench Spanner 300mm length as per IS 6149 and IS 6131 Adjustable Wrench Spanner 300mm length as per IS 6149 and IS 6131 8 nos am.mm@dpk 60
7 Adjustable Wrench Spanner 380mm x 43mm as per IS 6149 and IS 6131 Adjustable Wrench Spanner 380mm x 43mm as per IS 6149 and IS 6131 8 nos am.mm@dpk 60
8 Ring Type Wrench Set 67mm to 3032 mm as per IS 2029 Ring Type Wrench Set 67mm to 3032 mm as per IS 2029 8 set am.mm@dpk 60
9 Box end Ring Spanner Wrench 10mm x 11mm as per IS 2029 Box end Ring Spanner Wrench 10mm x 11mm as per IS 2029 10 nos am.mm@dpk 60
10 Box end Ring Spanner Wrench 18mm x 19mm as per IS 2029 Box end Ring Spanner Wrench 18mm x 19mm as per IS 2029 15 nos am.mm@dpk 60
11 Heavy duty Socket Wrench 46mm 1 inch square drive Heavy duty Socket Wrench 46mm 1 inch square drive 4 nos am.mm@dpk 60
12 Heavy duty Socket Wrench 32mm 1 inch square drive Heavy duty Socket Wrench 32mm 1 inch square drive 4 nos am.mm@dpk 60
13 Flat Ring Type Wrench set 6mm to 32mm as per IS 2029 Flat Ring Type Wrench set 6mm to 32mm as per IS 2029 4 set am.mm@dpk 60
14 Wrench Set Allen Key Set 6mm to 25mm Wrench Set Allen Key Set 6mm to 25mm 4 set am.mm@dpk 60
15 Ring Spanner Wrench Set 6mm to 36mm as per IS 2029 Ring Spanner Wrench Set 6mm to 36mm as per IS 2029 4 set am.mm@dpk 60
16 Box end Ring Spanner Wrench 21mm x 23mm as per IS 2029 Box end Ring Spanner Wrench 21mm x 23mm as per IS 2029 8 nos am.mm@dpk 60
17 Box end Ring Spanner Wrench 24mm x 26mm as per IS 2029 Box end Ring Spanner Wrench 24mm x 26mm as per IS 2029 10 nos am.mm@dpk 60
18 Box end Ring Spanner Wrench 30mm x 32mm as per IS 2029 Box end Ring Spanner Wrench 30mm x 32mm as per IS 2029 10 nos am.mm@dpk 60
19 Box end Ring Spanner Wrench 20mm x 22mm as per IS 2029 Box end Ring Spanner Wrench 20mm x 22mm as per IS 2029 10 nos am.mm@dpk 60
20 Box end Ring Spanner Wrench 24mm x 27mm as per IS 2029 Box end Ring Spanner Wrench 24mm x 27mm as per IS 2029 10 nos am.mm@dpk 60
21 Box end Ring Spanner Wrench 12mm x 13mm as per IS 2029 Box end Ring Spanner Wrench 12mm x 13mm as per IS 2029 8 nos am.mm@dpk 60
22 Box end Ring Spanner Wrench 14mm x 15mm as per IS 2029 Box end Ring Spanner Wrench 14mm x 15mm as per IS 2029 8 nos am.mm@dpk 60
23 Box end Ring Spanner Wrench 16mm x 17mm as per IS 2029 Box end Ring Spanner Wrench 16mm x 17mm as per IS 2029 8 nos am.mm@dpk 60
24 Ring Spanner Wrench Set 10mm to 36mm as per IS 2029 Ring Spanner Wrench Set 10mm to 36mm as per IS 2029 4 set am.mm@dpk 60
25 Wrench Box end hammering spanner 46mm as per IS 4509 Wrench Box end hammering spanner 46mm as per IS 4509 4 nos am.mm@dpk 60
26 Box end Ring Spanner Wrench 41mm x 46mm as per IS 2029 Box end Ring Spanner Wrench 41mm x 46mm as per IS 2029 8 nos am.mm@dpk 60
27 Box end Ring Spanner Wrench Single ended 36mm as per IS 2029 Box end Ring Spanner Wrench Single ended 36mm as per IS 2029 10 nos am.mm@dpk 60
28 Box end Ring Spanner Wrench Single ended 48mm as per IS 2029 Box end Ring Spanner Wrench Single ended 48mm as per IS 2029 4 nos am.mm@dpk 60
29 Box end Ring Spanner Wrench 25mm x 28mm as per IS 2029 Box end Ring Spanner Wrench 25mm x 28mm as per IS 2029 5 nos am.mm@dpk 60
30 Double end Wrench 10mm x 11mm as per IS 2028 and IS 6131 Double end Wrench 10mm x 11mm as per IS 2028 and IS 6131 5 nos am.mm@dpk 60
31 Double end Wrench 14mm x 15mm as per IS 2028 and IS 6131 Double end Wrench 14mm x 15mm as per IS 2028 and IS 6131 5 nos am.mm@dpk 60
32 Double end Wrench 20mm x 22mm as per IS 2028 and IS 6131 Double end Wrench 20mm x 22mm as per IS 2028 and IS 6131 8 nos am.mm@dpk 60
33 Double end Wrench 21mm x 23mm as per IS 2028 and IS 6131 Double end Wrench 21mm x 23mm as per IS 2028 and IS 6131 8 nos am.mm@dpk 60
34 Double end Wrench Set 10mm to 36mm as per IS 2028 and IS 6131 Double end Wrench Set 10mm to 36mm as per IS 2028 and IS 6131 4 set am.mm@dpk 60
35 Double end Wrench BSW Thread 12mm x 13mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 12mm x 13mm as per IS 2028 and IS 6131 8 nos am.mm@dpk 60
36 Double end Wrench BSW Thread 16mm x 17mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 16mm x 17mm as per IS 2028 and IS 6131 8 nos am.mm@dpk 60
37 Double end Wrench BSW Thread 18mm x 19mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 18mm x 19mm as per IS 2028 and IS 6131 10 nos am.mm@dpk 60
38 Double end Wrench BSW Thread 36mm x 41mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 36mm x 41mm as per IS 2028 and IS 6131 8 nos am.mm@dpk 60
39 Double end Wrench BSW Thread 46mm x 50mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 46mm x 50mm as per IS 2028 and IS 6131 4 nos am.mm@dpk 60
40 Double end Wrench BSW Thread 24mm x 27mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 24mm x 27mm as per IS 2028 and IS 6131 8 nos am.mm@dpk 60
41 Double end Wrench BSW Thread 30mm x 32mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 30mm x 32mm as per IS 2028 and IS 6131 10 nos am.mm@dpk 60
42 Tubular Box Wrench set 6mmx7mm to 20mmx22mm Tubular Box Wrench set 6mmx7mm to 20mmx22mm 5 set am.mm@dpk 60
43 Tubular Box Wrench set 6mmx7mm to 30mmx32mm Tubular Box Wrench set 6mmx7mm to 30mmx32mm 4 set am.mm@dpk 60
44 Vernier Caliper digital type measurement range 0 to 300mm Type A With jaws on both sides for external andinternal measurements calibration Vernier Caliper digital type measurement range 0 to 300mm Type A With jaws on both sides for external andinternal measurements calibration 5 nos am.mm@dpk 60
45 Flat Chisel 16mm x 150mm as per IS 402 Flat Chisel 16mm x 150mm as per IS 402 10 nos am.mm@dpk 60
46 Screwdriver 450mm as per IS 844 Screwdriver 450mm as per IS 844 10 nos am.mm@dpk 60
47 Screwdriver two in one 250mm Screwdriver two in one 250mm 8 nos am.mm@dpk 60
48 Screwdriver two in one 200mm Screwdriver two in one 200mm 8 nos am.mm@dpk 60
49 Screwdriver Set different sizes 75mm to 300mm 20 Nos Screwdriver Set different sizes 75mm to 300mm 20 Nos 8 set am.mm@dpk 60
50 Flat Hand File Rough length 12 inch as per IS 1931 Flat Hand File Rough length 12 inch as per IS 1931 8 nos am.mm@dpk 60
51 Flat Hand File Smooth length 12 inch as per IS 1931 Flat Hand File Smooth length 12 inch as per IS 1931 8 nos am.mm@dpk 60
52 Half Round Hand File Rough length 12 inch as per IS 1931 Half Round Hand File Rough length 12 inch as per IS 1931 8 nos am.mm@dpk 60
53 Round Hand File Rough length 12 inch as per IS 1931 Round Hand File Rough length 12 inch as per IS 1931 8 nos am.mm@dpk 60
54 Hammer Sledge type 6lbs Hammer Sledge type 6lbs 8 nos am.mm@dpk 60
55 Hammer Double faced Sledge type 8point2 kg Hammer Double faced Sledge type 8point2 kg 8 nos am.mm@dpk 60
56 Grinding Wheel Abrasive Grit DCA24 180mm x 7mm x 25point23mm Grinding Wheel Abrasive Grit DCA24 180mm x 7mm x 25point23mm 20 nos am.mm@dpk 60
57 Adjustable Slide Wrench 300mm as per IS 6149 and IS 6131 Adjustable Slide Wrench 300mm as per IS 6149 and IS 6131 8 nos am.mm@dpk 60
58 Measuring Tape Steel 15 meter length Measuring Tape Steel 15 meter length 8 nos am.mm@dpk 60
59 Measuring Tape Steel 3 meter length Measuring Tape Steel 3 meter length 10 nos am.mm@dpk 60
60 Spirit Level guage Plated Top and Bottom 300mm Spirit Level guage Plated Top and Bottom 300mm 5 nos am.mm@dpk 60
61 Pipe Wrench 300 mm length conforming to IS 4003 part 1 Pipe Wrench 300 mm length conforming to IS 4003 part 1 3 nos am.mm@dpk 60
62 Pipe Wrench 600 mm length conforming to IS 4003 part 1 Pipe Wrench 600 mm length conforming to IS 4003 part 1 2 nos am.mm@dpk 60
63 Hacksaw Blade length 300mm 18TPI conforming to IS 2594 Hacksaw Blade length 300mm 18TPI conforming to IS 2594 200 nos am.mm@dpk 60
64 Digital Multimeter 3V 3point5 digit Digital Multimeter 3V 3point5 digit 20 nos am.mm@dpk 60
65 11 kv Discharge Rod 1M PVC handgrip along with all the accessories Bidder msut submit relevant test report along with the supply 11 kv Discharge Rod 1M PVC handgrip along with all the accessories Bidder msut submit relevant test report along with the supply 15 nos am.mm@dpk 60
66 Digital Tongue tester 0 100A 0 600V hand held battery operated Safety rating CAT III 600 V of IEC 61010 2 D31 Digital Tongue tester 0 100A 0 600V hand held battery operated Safety rating CAT III 600 V of IEC 61010 2 D31 10 nos am.mm@dpk 60
67 Wire Cutting Plier 8 inch conforming to IS 5087 and IS 2615 Wire Cutting Plier 8 inch conforming to IS 5087 and IS 2615 50 nos am.mm@dpk 60
68 Combination Plier 8 inch Insulation voltage 1000V as per IEC 60900 Combination Plier 8 inch Insulation voltage 1000V as per IEC 60900 20 nos am.mm@dpk 60
69 Grease Gun hand operated capacity 10 kg Grease Gun hand operated capacity 10 kg 5 nos am.mm@dpk 60
70 Grease Gun hand operated capacity 20 kg Grease Gun hand operated capacity 20 kg 5 nos am.mm@dpk 60
71 Grease Gun hand operated capacity 5 kg Grease Gun hand operated capacity 5 kg 5 nos am.mm@dpk 60
72 Double end Wrench BSW Thread 6mm x 32mm as per IS 2028 and IS 6131 Double end Wrench BSW Thread 6mm x 32mm as per IS 2028 and IS 6131 20 nos am.mm@dpk 60
73 Ring Spanner Wrench Set 6mm to 32mm as per IS 2029 Ring Spanner Wrench Set 6mm to 32mm as per IS 2029 15 set am.mm@dpk 60
74 Box end Ring Spanner Wrench 6mm to 32mm as per IS 2029 Box end Ring Spanner Wrench 6mm to 32mm as per IS 2029 10 set am.mm@dpk 60
75 Wrench Set Allen Key Set 2mm to 32mm Wrench Set Allen Key Set 2mm to 32mm 15 set am.mm@dpk 60
76 Socket Wrench set 6mm to 32mm drive size 0point5 inch with extensions Socket Wrench set 6mm to 32mm drive size 0point5 inch with extensions 15 set am.mm@dpk 60
77 Double end Wrench 24mm x 26mm as per IS 2028 and IS 6131 Double end Wrench 24mm x 26mm as per IS 2028 and IS 6131 15 nos am.mm@dpk 60
78 Double end offset Ring Spanner 24mm x 26mm as per IS 2029 Double end offset Ring Spanner 24mm x 26mm as per IS 2029 15 nos am.mm@dpk 60
79 Socket Wrench 36mm 1 inch square drive Socket Wrench 36mm 1 inch square drive 8 nos am.mm@dpk 60
80 Combination Plier 10 inch Insulation voltage 1000V as per IEC 60900 Combination Plier 10 inch Insulation voltage 1000V as per IEC 60900 15 nos am.mm@dpk 60
81 Combination Plier 8 inch as per IS 6149 Combination Plier 8 inch as per IS 6149 8 nos am.mm@dpk 60
82 Nose Plier 8 inch as per IS 3552 Nose Plier 8 inch as per IS 3552 8 nos am.mm@dpk 60
83 Circlip Plier Internal straight nose 8 inch as per IS 7989 Circlip Plier Internal straight nose 8 inch as per IS 7989 8 nos am.mm@dpk 60
84 Screwdriver flat 200mm as per IS 844 Screwdriver flat 200mm as per IS 844 30 nos am.mm@dpk 60
85 Screwdriver flat 250mm as per IS 844 Screwdriver flat 250mm as per IS 844 30 nos am.mm@dpk 60
86 Screwdriver flat 300mm as per IS 844 Screwdriver flat 300mm as per IS 844 15 nos am.mm@dpk 60
87 Adjustable Slide Wrench 250mm length as per IS 6149 and IS 6131 Adjustable Slide Wrench 250mm length as per IS 6149 and IS 6131 8 nos am.mm@dpk 60
88 Adjustable spanner 250mm length as per IS 6149 and IS 6131 Adjustable spanner 250mm length as per IS 6149 and IS 6131 8 nos am.mm@dpk 60
89 Adjustable spanner 300mm length as per IS 6149 and IS 6131 Adjustable spanner 300mm length as per IS 6149 and IS 6131 8 nos am.mm@dpk 60
90 Hand hacksaw Frame length 300mm Hand hacksaw Frame length 300mm 20 nos am.mm@dpk 60
91 Bench vice Jaw Nominal Width 200mm material cast iron as per IS 2586 Bench vice Jaw Nominal Width 200mm material cast iron as per IS 2586 2 nos am.mm@dpk 60
92 Barrel Pump Rotary type pipe length 4M capacity 200 ltr Barrel Pump Rotary type pipe length 4M capacity 200 ltr 7 nos am.mm@dpk 60
93 Line tester up to 415V Line tester up to 415V 50 nos am.mm@dpk 60
94 Double end Wrench 32mm x 36mm as per IS 2028 and IS 6131 Double end Wrench 32mm x 36mm as per IS 2028 and IS 6131 10 nos am.mm@dpk 60
95 Pipe Wrench 24 inch length conforming to IS 4003 part 1 Pipe Wrench 24 inch length conforming to IS 4003 part 1 6 nos am.mm@dpk 60
96 Angle grinder 900W 220V Disc dia 100mm Angle grinder 900W 220V Disc dia 100mm 4 nos am.mm@dpk 60
97 Coiled wire hot air gun 230V air flow 150 to 500 lpm 2000W Coiled wire hot air gun 230V air flow 150 to 500 lpm 2000W 10 nos am.mm@dpk 60
98 Drill bit set High Speed Steel 116inch to 12inch Drill bit set High Speed Steel 116inch to 12inch 10 set am.mm@dpk 60
99 Drill High Speed Steel Twisted 19mm Drill High Speed Steel Twisted 19mm 20 nos am.mm@dpk 60
100 Megger Insulation tester Hand operated Metal body 5000V tets voltage 0 to 200 Gigaohm Relevant test reports must be submitted at the time of supply Megger Insulation tester Hand operated Metal body 5000V tets voltage 0 to 200 Gigaohm Relevant test reports must be submitted at the time of supply 5 nos am.mm@dpk 60
101 Megger Insulation tester Hand operated 500V test voltage 0 to 1000 Mega Ohm Relevant test reports must be submitted at the time of supply Megger Insulation tester Hand operated 500V test voltage 0 to 1000 Mega Ohm Relevant test reports must be submitted at the time of supply 7 nos am.mm@dpk 60
102 Megger Insulation tester Hand operated 1000V test voltage 0 to 2000 Mega Ohm Relevant test reports must be submitted at the time of supply Megger Insulation tester Hand operated 1000V test voltage 0 to 2000 Mega Ohm Relevant test reports must be submitted at the time of supply 7 nos am.mm@dpk 60
103 Megger Insulation tester Hand operated 2500V test voltage metal body 0 to 2500 mega ohm Relevant test reports must be submitted at the time of supply Megger Insulation tester Hand operated 2500V test voltage metal body 0 to 2500 mega ohm Relevant test reports must be submitted at the time of supply 7 nos am.mm@dpk 60
104 Digital Multimeter ACDC measurement Range 0 to 20A 0 to 1000V Digital Multimeter ACDC measurement Range 0 to 20A 0 to 1000V 15 nos am.mm@dpk 60
105 Socket Wrench set 6mm to 22mm 0point5 inch square drive Chrome vanadium steel Socket Wrench set 6mm to 22mm 0point5 inch square drive Chrome vanadium steel 8 set am.mm@dpk 60
106 Socket Wrench set 22mm to 50mm 0point75 inch square drive Chrome vanadium steel Socket Wrench set 22mm to 50mm 0point75 inch square drive Chrome vanadium steel 5 set am.mm@dpk 60
107 Socket Wrench set 10mm to 46mm 0point75 inch square drive Chrome vanadium steel Socket Wrench set 10mm to 46mm 0point75 inch square drive Chrome vanadium steel 5 set am.mm@dpk 60
108 Socket Wrench set 10mm to 32mm 0point5 inch square drive Chrome vanadium steel Socket Wrench set 10mm to 32mm 0point5 inch square drive Chrome vanadium steel 8 set am.mm@dpk 60
109 Angle grinder 1200W 230V 10000 RPM Disc dia 100mm Angle grinder 1200W 230V 10000 RPM Disc dia 100mm 2 nos am.mm@dpk 60
110 Straight Grinder 650W 230V 10000 30000 RPM Straight Grinder 650W 230V 10000 30000 RPM 3 nos am.mm@dpk 60
111 Double open end Wrench Set 6mm to 32mm as per IS 2028 and IS 6131 Double open end Wrench Set 6mm to 32mm as per IS 2028 and IS 6131 15 set am.mm@dpk 60
112 Wrench Box end single end ring 80mm as per IS 2029 Wrench Box end single end ring 80mm as per IS 2029 10 nos am.mm@dpk 60
113 Heavy Duty Socket Wrench set 8mm to 32mm 0point5 inch square drive Chrome vanadium steel Heavy Duty Socket Wrench set 8mm to 32mm 0point5 inch square drive Chrome vanadium steel 10 set am.mm@dpk 60
114 Grinding Wheel Abrasive 20mm x 100mm x 2point76mm Grinding Wheel Abrasive 20mm x 100mm x 2point76mm 80 nos am.mm@dpk 60
115 Scredriver set with neon bulb size 6 x 0.8 3.5 x 0point5 square poker and extension rod Scredriver set with neon bulb size 6 x 0.8 3.5 x 0point5 square poker and extension rod 40 set am.mm@dpk 60
116 Hand Drill 800W 230V 900 RPM drill dia 8 to 16mm Hand Drill 800W 230V 900 RPM drill dia 8 to 16mm 5 nos am.mm@dpk 60
117 Combination Plier Insulated as per IEC 60900 cutting width 6mm Combination Plier Insulated as per IEC 60900 cutting width 6mm 50 nos am.mm@dpk 60
118 Screwdriver flat 100mm as per IS 844 Screwdriver flat 100mm as per IS 844 30 nos am.mm@dpk 60
119 Screwdriver flat 150mm as per IS 844 Screwdriver flat 150mm as per IS 844 30 nos am.mm@dpk 60
120 Block tackle Hand operated Pulling and lifting machine ISI marked lifting capacity 5T Pulling capacity 8T 20mm Block tackle Hand operated Pulling and lifting machine ISI marked lifting capacity 5T Pulling capacity 8T 20mm 2 nos am.mm@dpk 60
121 Chain pulley block with tackle hand operated capacity 3 Ton length of chain 6M Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply Chain pulley block with tackle hand operated capacity 3 Ton length of chain 6M Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply 5 nos am.mm@dpk 60
122 Chain pulley block with tackle hand operated capacity 5 Ton length of chain 6M Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply Chain pulley block with tackle hand operated capacity 5 Ton length of chain 6M Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply 5 nos am.mm@dpk 60
123 Chain pulley block with tackle hand operated capacity 2 Ton length of chain 3M Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply Chain pulley block with tackle hand operated capacity 2 Ton length of chain 3M Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply 5 nos am.mm@dpk 60
124 Chain pulley block with tackle hand operated capacity 2 Ton length of chain 6M triple gear Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply Chain pulley block with tackle hand operated capacity 2 Ton length of chain 6M triple gear Top and bottom hook safety lock ISI marked Bidder must submit relevant test report at the time of supply 5 nos am.mm@dpk 60
125 Hydraulic Jack 50 T capacity Hydraulic Jack 50 T capacity 2 nos am.mm@dpk 60
126 Hydraulic Jack 10 T capacity Hydraulic Jack 10 T capacity 2 nos am.mm@dpk 60

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

GST certificate

2

PAN card

3

Experience certificates

4

Financial statements

5

EMD submission proof

6

Technical bid documents

7

OEM authorization / Manufacturer certificate

8

Installation/Commissioning & Training capability documents

9

Service center details near consignee destinations

Frequently Asked Questions

Key insights about CHHATTISGARH tender market

How to bid for SECL goods supply tender Korba 2025?

Bidders must submit GST, PAN, experience and financials; include OEM authorization and installation capability documents; EMD ₹1,000 via RTGS to SECL; ensure 1-year warranty and service center details; follow option clause for quantity variation up to 25%.

What documents are required for SECL DIPKA area bid 2025?

Required documents include GST certificate, PAN, experience certificates, financial statements, EMD proof, OEM authorization, technical bid documents, and installation/commissioning capabilities; service centers near consignee destinations must be provided.

What are the delivery terms for SECL 2025 supply contract?

Delivery starts from the last date of the original delivery order; option clause allows up to 25% quantity variation; additional time is computed as (increased quantity/original quantity) × original delivery period with a minimum 30 days.

What warranty is required for SECL goods supply?

Warranty is 1 year from final acceptance or after installation/commissioning; OEM warranty certificates must be supplied at delivery; after-sales service must be supported by a nationwide service network.

How is GST handled for SECL tender Korba 2025?

Bidders bear GST; reimbursement will be at actuals or the lower of the quoted rate; SECL will not assume GST responsibility beyond stated policy.

What is the EMD amount for SECL 2025 tender and payment method?

EMD amount is ₹1,000; payment must be made online via RTGS/Internet banking to the SECL, DIPKA AREA bank details provided in the tender text.

Which organization and location is associated with SECL 2025 supply?

Organization is South Eastern Coalfields Limited (SECL) under Coal India Limited; location references include Korba, Chhattisgarh, indicating the primary consignee region for delivery.

What are the key eligibility criteria for SECL 2025 bid?

Eligibility requires OEM authorization, proven installation/commissioning capability in India, GST and financial credentials, and ability to meet the warranty and after-sales service obligations stated in the terms.

Similar Tenders

4 found
Urgent

Indian Army Welding Tools Tender DODA Jammu & Kashmir 2026 – BOSCH Drill Bit Set, Allen Keys, Grounding Clamp Standardized

Indian Army

📍 DODA, JAMMU & KASHMIR

Est: ₹11,300
⏰ Deadline: 5 days left
🛒 Type: Goods
View GEM
Urgent

Eastern Coalfields Limited WRENCH/Allen Wrench/Screwdriver Set Tender Rajmahal Area 2026

Eastern Coalfields Limited

📍 GODDA, JHARKHAND

⏰ Deadline: 4 days left
🛒 Type: Goods
View GEM
Urgent

Indian Army Nilgiris Tamil Nadu Heavy Duty Tools Tender 2026 – 10 Ton Hydraulic Jack & 240W Soldering Iron ISO/IS Standards

Indian Army

📍 NILGIRIS, TAMIL NADU

⏰ Deadline: 2 days left
🛒 Type: Goods
View GEM
Urgent

Indian Army Faridkot Tool Procurement Tender 2026 for 19 Item Battery Lead Sets and Stanley Tools - IS/IS0 Standards 2026

Indian Army

📍 FARIDKOT, PUNJAB

Est: ₹90,000
⏰ Deadline: 1 day left
🛒 Type: Goods
View GEM