Government Tender Published for Group B Wiring for light point,Wiring for light or power plug with 2X4 sq. mm FRLS,Wiring for light in JAIPUR, RAJASTHAN

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the size 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

Wiring for circuit/ submain wiring along with earth wire with the sizes 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

Supplying and drawing of 4 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 6 x 1.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 6 x 2.5 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of 6 x 4 sq. mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of 25 mm size of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing of 1 or 2 Module (75 mm X 75 mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

Supplying and fixing of 4 Module (125 mm X 75 mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

Supplying and fixing of 8 Module (125 mm X 125 mm) size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

Supplying and fixing 5/6 A switch Modular on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing 3 pin 5/6 A socket outlet Modular on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing Modular bell push on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Providing & testing Ding- Dong type sound two module call bell on the existing bell point i/c connection, testing etc. as required. ( ISI MAKE).

ITC of above existing 1200mm ceiling fan i/c servicing and minor repairing (other than rewinding) i/c cleaning , oiling, greasing etc complete as required

Dismentalling, serviceing and repairing i/c Rewinding and ITC of 300 mm Exhaust Fan i/c replace ment of bush shaft /bearings i/c cleaning , oiling, greasing etc complete as required

Dismentalling, serviceing and repairing i/c Rewinding and ITC of 450 mm Exhaust Fan i/c replace ment of bush shaft /bearings i/c cleaning , oiling, greasing etc complete as required

SITC IP20 18-20 watt LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver, System lumen efficacy greater than or equal to 110 lm/Watt output, and all other accessories on ceiling suitable for 240 Volts AC supply i/c connection with 1.5 sq.mm. copper conductor wire etc. as reqd.

Supplying and fixing of Vertical type 15 Litre capacity 2000 watt water storage electric geyser having BEE 5 star rating with IP24 protection / ISI Mark, suitable for 230V 50 Hz, AC supply with LED type heating indicator, Temperature control knob, unidirectional valve with air lock release arrangement, cold water inlet & hot water outlet braided hose pipe, fixing wall bracket including inter connection , testing, commissioning etc., complete as reqd.

SITC IP20 10 Watt LED batten type integrated light fixture made from Powder coated Extruded aluminium housing with in built driver, System lumen efficacy greater than or equal to 110 lm/Watt output, and all other accessories on ceiling suitable for 240 Volts AC supply i/c connection with 1.5 sq.mm. copper conductor wire etc. as reqd.

Installation of 1.5 / 2.0 TR Capacity Split AC Units with Indoor & outdoor unit I/c fixing the refrigerant piping with insulation, cutting, brazing, laying the cable along with the piping connections, repairing the minor leakages of the complete system i/c testing, commissioning of Split type AC unit etc. complete as reqd.

Pdg and fixing 5/8 inch dia copper refrigerant piping i/c covering of copper piping with polystyrene insulation i/c cutting, brazing, jointing, bends, sockets etc as reqd.

S/F suitable size MS Stand for placement of split type AC outdoor unit made out of 16 gauge powder coated MS sheet i/c fixing with help of 4 Nos. fasteners for grouting on wall / floor, etc. complete as required.

Supplying and fixing 25 amp. Moduler type starter switch on the 2 module modular plate and switch box including connections etc. as required.

Repairing and painting of existing 3 Mtr. height Galvanised Mild steel pole, the pole shall be painted with synthetic enamel paint of approved colour with a MS pole box 250 mm x 200 mm x 100 mm at the bottom comprising four way 25 Amp. connector terminal and 1 No. 5/6A SP MCB with 3 x 2.5 sq. mm PVC insulated pvc sheathed copper conductor cable wiring in the pole from connector to luminaires on the existing foundation i/c sign wiriting on pole box i/c repairing of existing cement concrete foundation including two coats of exterior paint to suit the colour of pole etc complete as directed and as approved by Engineer in Charge.

Supply, Installation, Testing & Commissioning of LED Post top type 27 watt with IP 65 rating luminaire having aluminium die cast housing with LED and having polycarbonate cover and mounting suitable for operation on 220-240V, 50 Hz. complete with all accessories as approved by Engineer in Charge.

SITC of 50 Watt Energy Efficient LED Flood Light Luminaire with inbuilt High Power LEDs generating cool white light with unique peanut lens in Pressure Die Cast Aluminum housing having 100 lm / watt system efficacy, IP 66, Polycarbonate cover, In-built Driver unit , suitable for work on single phase 230 volts, 50 HZ AC supply i/c making suiable arrangment for fixing the light on existing pole i/c making connection of fitting from eixisting MCB in Compound Light box with help of existing 3 core 2.5 sqmm PVC insulated and PVC Sheathed Copper Conductor Cable and testing etc complete as directed by Engineer in Charge as reqd.

Laying and fixing of one number PVC/XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm (clamped with 1mm thick saddle) size on wall surface as required.

Laying and fixing of one number PVC/XLPE insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm (clamped with 1mm thick saddle) size on cable tray as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Supply of 1 no. XLPE insulated and PVC sheathed power cable of 1.1 KV grade of size 2 x 6 sqmm. Aluminium conductor armoured cable suitable for working on 230V, 50 Hz AC supply conforming to latest relevant IS standard, all complete as directed by Engineer in Charge.

Supplying and fixing digital weekly programmable time switch (Astronomical Weekly Programmable) alongwith 10 Amp.3-pole power contractor for controlling compound lighting in the existing DB complete with interconnections connections, testing and commissioning etc. as required.

Providing, laying and fixing 32 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including finishing etc as required.

Repairing of dust and vermin proof cubical out door double door type floor mounted, front and back side openable Feeder Piller Panel i/c cleaning, rubbing and painting with 02 coats of synthetic enamel paint, repairing / replacement of lock and key arrangement, replacement of connectors and internal wiring with suitable size of copper conductor wire i/c minor repairing works i/c testing etc complete as directed and as approved by Engineer in Charge.