Bids are Invited For CO2 GAS CARTRIDGE FOR USED IN 9 LT MECH FOAM FIRE EXTINGUISHERS CAPACITY 60 GM,CAP ASSEMBLY SS OF 0 in BANKURA, WEST BENGAL
Bid Publish Date
24-Feb-2025, 12:45 pm
Bid End Date
22-Mar-2025, 11:00 am
Value
₹3,82,773
Location
Progress
RAQuantity
1575
Categories
28
Public procurement opportunity for Damodar Valley Corporation CO2 GAS CARTRIDGE FOR USED IN 9 LT MECH FOAM FIRE EXTINGUISHERS CAPACITY 60 GM, CAP ASSEMBLY SS OF 09 LTR WATER TYPE FIRE EXTINGUISHERS, CAP ASSEMBLY SS OF 09 LTR MECHANICAL FOAM FIRE EXTINGUISHERS, RUBBER WASHER FOR DISCHARGE TUBE OF WATER FOAM TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 15683 2006, SIPHON TUBE FOR CAP ASSEMBLY OF WATER FOAM TYPE EXTINGUISHER CAP 09 LITRES, DISCHARGE TUBE WITH NOZZLE FOR WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003, DISCHARGE TUBE WITH FMB NOZZLE FOR FOAM TYPE EXTINGUISHER CAPACITY 9 LTR, RUBBER WASHER FOR CAP ASSEMBLY OF WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003, SAFETY PIN FOR SQUEEZE GRIP TYPE ALL EXTINGUISHERS, CAP ASSEMBLY WITH DISCHARGE TUBE FOR WATER TYPE EXTINGUISHER CAPACITY 9 LTRS, CAP ASSEMBLY WITH DISCHARGE TUBE FOR MECH. FOAM TYPE EXTINGUISHER CAPACITY 9 LTRS, DISCHARGE TUBE WITH PVC FMB NOZZLE FOR 09 LTRS MECHANICAL FOAM EXTINGUISHER, CAP ASSEMBLY FOR DCP TYPE EXTINGUISHERS CAP 9 ltr, RUBBER WASHER FOR CAP ASSEMBLE OF DCP TYPE 06 09 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006, INNER SHELL TUBE FOR CAP ASSEMBLY OF DCP TYPE EXTINGUISHERS CAP 9 KG, DISCHARGE TUBE WITH NOZZLE FOR DCP EXTINGUISHER CAPACITY 09 KG AS PER IS 15683 2006, RUBBER WASHER FOR DISCHARGE TUBE OF DCP TYPE 0609 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006, RUBBER WASHER FOR CAP ASSEMBLY OF MECHANICAL FOAM EXTINGUISHER OF 50 LTR CAPACITY AS PER IS 13386 1992, CARRYING HANDLE WITH HAND GRIP FOR CO2 EXTINGUISHER OF 6. 5 KG 4. 5 KG CAPACITY AS PER IS 2878 2004, DISCHARGE TUBE FOR CO2 EXTINGUISHER OF 9 KG CAPACITY AS PER IS 2878 2004, DRAGGING PULLING HANDLE FOR 6. 5 KG CAPACITY CO2, DISCHARGE HORN WITH HANDLE FOR CO2 EXTINGUISHER CAPACITY 4. 5KG 6. 8KG SIMILAR MATERILAS AS PER IS 2878 2004, DISCHARGE TUBE FOR CO2 6. 5 4. 5 KG EXTINGUISHER AS PER IS 2878 2004 POINT NO 6. 4. 2 AND 6. 4. 3 AND TABLE2 TABLE 2 POINT IV V, DISCHARGE TUBE WITH NOZZLE SQUEEZE GRIP FOR DCP EXTINGUISHER OF 10 KG CAPACITY AS PER IS 2171 1999, RUBBER WASHER O RING TYPE FOR BA CYLINDER in BANKURA, WEST BENGAL. Quantity: 1575 issued by. Submission Deadline: 22-03-2025 11: 00: 00. View full details and respond.
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Item Category
CO2 GAS CARTRIDGE FOR USED IN 9 LT MECH FOAM FIRE EXTINGUISHERS CAPACITY 60 GM , CAP ASSEMBLY SS OF 09 LTR WATER TYPE FIRE EXTINGUISHERS , CAP ASSEMBLY SS OF 09 LTR MECHANICAL FOAM FIRE EXTINGUISHERS , RUBBER WASHER FOR DISCHARGE TUBE OF WATER FOAM TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 15683 2006 , SIPHON TUBE FOR CAP ASSEMBLY OF WATER FOAM TYPE EXTINGUISHER CAP 09 LITRES , DISCHARGE TUBE WITH NOZZLE FOR WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003 , DISCHARGE TUBE WITH FMB NOZZLE FOR FOAM TYPE EXTINGUISHER CAPACITY 9 LTR , RUBBER WASHER FOR CAP ASSEMBLY OF WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003 , SAFETY PIN FOR SQUEEZE GRIP TYPE ALL EXTINGUISHERS , CAP ASSEMBLY WITH DISCHARGE TUBE FOR WATER TYPE EXTINGUISHER CAPACITY 9 LTRS , CAP ASSEMBLY WITH DISCHARGE TUBE FOR MECH. FOAM TYPE EXTINGUISHER CAPACITY 9 LTRS , DISCHARGE TUBE WITH PVC FMB NOZZLE FOR 09 LTRS MECHANICAL FOAM EXTINGUISHER , CAP ASSEMBLY FOR DCP TYPE EXTINGUISHERS CAP 9 ltr , RUBBER WASHER FOR CAP ASSEMBLE OF DCP TYPE 06 09 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006 , INNER SHELL TUBE FOR CAP ASSEMBLY OF DCP TYPE EXTINGUISHERS CAP 9 KG , DISCHARGE TUBE WITH NOZZLE FOR DCP EXTINGUISHER CAPACITY 09 KG AS PER IS 15683 2006 , RUBBER WASHER FOR DISCHARGE TUBE OF DCP TYPE 0609 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006 , RUBBER WASHER FOR CAP ASSEMBLY OF MECHANICAL FOAM EXTINGUISHER OF 50 LTR CAPACITY AS PER IS 13386 1992 , CARRYING HANDLE WITH HAND GRIP FOR CO2 EXTINGUISHER OF 6.5 KG 4.5 KG CAPACITY AS PER IS 2878 2004 , DISCHARGE TUBE FOR CO2 EXTINGUISHER OF 9 KG CAPACITY AS PER IS 2878 2004 , DRAGGING PULLING HANDLE FOR 6.5 KG CAPACITY CO2 , DISCHARGE HORN WITH HANDLE FOR CO2 EXTINGUISHER CAPACITY 4.5KG 6.8KG SIMILAR MATERILAS AS PER IS 2878 2004 , DISCHARGE TUBE FOR CO2 6.5 4.5 KG EXTINGUISHER AS PER IS 2878 2004 POINT NO 6.4.2 AND 6.4.3 AND TABLE2 TABLE 2 POINT IV V , DISCHARGE TUBE WITH NOZZLE SQUEEZE GRIP FOR DCP EXTINGUISHER OF 10 KG CAPACITY AS PER IS 2171 1999 , RUBBER WASHER O RING TYPE FOR BA CYLINDER
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 7
GeM-Bidding-7564235.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
25 Items Sign in to view GEM price trends Sign in for GEM prices
CO2 GAS CARTRIDGE FOR USED IN 9 LT MECH FOAM FIRE EXTINGUISHERS CAPACITY 60 GM
The gas cartridge shall be manufactured from seamless or welded steel tube As per IS 4947 2006 Gas cartridge required for fire extinguisher having squeeze grip type puncturing and operating mechanism
CAP ASSEMBLY SS OF 09 LTR WATER TYPE FIRE EXTINGUISHERS
The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 940 2003 reaffirmed 2008.
CAP ASSEMBLY SS OF 09 LTR MECHANICAL FOAM FIRE EXTINGUISHERS
The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 10204 2001.
RUBBER WASHER FOR DISCHARGE TUBE OF WATER FOAM TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 15683 2006
Highly compressed and dense rubber washer having acid and alkali resistant. Outer dia 65mm inner dia 41 thickness 2.5 mm tolerance limit 1 mm. As per point iv of clause 5 Table 1 of IS 10204 2001
SIPHON TUBE FOR CAP ASSEMBLY OF WATER FOAM TYPE EXTINGUISHER CAP 09 LITRES
The syphon tube must be suitable for fit in the cap assembly and made of HDPE as per IS 10204 2001.
DISCHARGE TUBE WITH NOZZLE FOR WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003
Braided rubber plastic discharge tube fitted with discharge nozzle and adaptor SS Brass at the ends suitable for 09 ltrs Water Type Extinguisher. The discharge tube should have bursting pressure 40kgfcm2 and length and bore should not be less than 600 mm and 8 mm respectively as per IS 940 2003 reaffirmed 2008.
DISCHARGE TUBE WITH FMB NOZZLE FOR FOAM TYPE EXTINGUISHER CAPACITY 9 LTR
Reinforced heavy duty PVC discharge tube fitted mini foam branch and adaptor SS Brass at the ends suitable for 09 ltr Mach. Foam Extinguisher. The tube should have bursting pressure 50kgfcm2 and length and bore should not be less than 600 mm and 8 mm respectively as per IS 10204 2001
RUBBER WASHER FOR CAP ASSEMBLY OF WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003
Highly compressed and dense rubber washer having acid and alkali resistant as per IS 10204 2001
SAFETY PIN FOR SQUEEZE GRIP TYPE ALL EXTINGUISHERS
Safety clip shall be made of mild steel and suitable for 09ltr 9kg water Mach. Foam DCP type Extinguishers As per point viii of clause 5 Table 1 of IS 940 2003
CAP ASSEMBLY WITH DISCHARGE TUBE FOR WATER TYPE EXTINGUISHER CAPACITY 9 LTRS
The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 940 2003 reaffirmed 2008.
CAP ASSEMBLY WITH DISCHARGE TUBE FOR MECH. FOAM TYPE EXTINGUISHER CAPACITY 9 LTRS
The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 10204 2001.
DISCHARGE TUBE WITH PVC FMB NOZZLE FOR 09 LTRS MECHANICAL FOAM EXTINGUISHER
Reinforced heavy duty PVC discharge tube fitted mini foam branch and adaptor SS Brass at the ends suitable for 09 ltr Mach. Foam Extinguisher. The tube should have bursting pressure 50kgfcm2 and length and bore should not be less than 600 mm and 8 mm respectively as per IS 10204 2001
CAP ASSEMBLY FOR DCP TYPE EXTINGUISHERS CAP 9 ltr
The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 2171 1999 reaffirmed 2009
RUBBER WASHER FOR CAP ASSEMBLE OF DCP TYPE 06 09 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006
Highly compressed and dense rubber washer having acid and alkali resistant. Outer dia 65mm inner dia 41 thickness 2.5 mm tolerance limit 1 mm. As per point iv of clause 5 Table 1 of IS 10204 2001 As per IS 21711999 reaffirmed 2009
INNER SHELL TUBE FOR CAP ASSEMBLY OF DCP TYPE EXTINGUISHERS CAP 9 KG
The Inner shell tube shall be fitted in the cap and made of mild steel as per IS 2171 1999 reaffirmed 2009
DISCHARGE TUBE WITH NOZZLE FOR DCP EXTINGUISHER CAPACITY 09 KG AS PER IS 15683 2006
Braided PVC rubber discharge tube fitted with discharge nozzle made up of plastic and adaptor SS Brass at the ends, suitable for 09 kg DCP Type Extinguisher. The tube should have bursting pressure not less than 50kgfcm2 as per IS 2171 1999 reaffirmed 2010
RUBBER WASHER FOR DISCHARGE TUBE OF DCP TYPE 0609 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006
Highly compressed and dense rubber washer having acid and alkali resistant as per IS 2171 1999 reaffirmed 2010
RUBBER WASHER FOR CAP ASSEMBLY OF MECHANICAL FOAM EXTINGUISHER OF 50 LTR CAPACITY AS PER IS 13386 1992
Highly compressed and dense rubber washer having acid and alkali resistant. Outer dia 86 mm inner dia 61 mm thickness 03 mm tolerance limit 01mm as per IS 13386 1992 reaffirmed 2007.
CARRYING HANDLE WITH HAND GRIP FOR CO2 EXTINGUISHER OF 6.5 KG 4.5 KG CAPACITY AS PER IS 2878 2004
Carrying handle shall be made of mild steel and non-conductor of electricity suitable for 4.5 kg CO2 extinguisher as per IS 2878 2004 reaffirmed 2010.
DISCHARGE TUBE FOR CO2 EXTINGUISHER OF 9 KG CAPACITY AS PER IS 2878 2004
Reinforced rubber discharge hose fitted with polyethylene oval shape conical discharge horn with handle and adaptor SS Brass at the ends suitable for 09 kg CO2 extinguisher. The tube should have bursting pressure 275 kgfcm2 and length and bore should not be less than 02 mtr and 10 mm respectively as per IS 2878 2004 reaffirmed 2010.
DRAGGING PULLING HANDLE FOR 6.5 KG CAPACITY CO2
Dragging and pulling Handle along with all fittings & trolley along with wheels, clamps and all accessories suitable for 6.5 6.8 CO2 kg Extinguishers. Trolley and carrying handle shall be made of mild steel. The dimension of the trolley shall be 132 mm by 28 mm by 20 mm as per IS 2878 2004 reaffirmed 2010.
DISCHARGE HORN WITH HANDLE FOR CO2 EXTINGUISHER CAPACITY 4.5KG 6.8KG SIMILAR MATERILAS AS PER IS 2878 2004
The Discharge Horn shall be Non conductor of electricity like polyethylene fibre glass and similar materials as per IS 28782004 reaffirmed 2010
DISCHARGE TUBE FOR CO2 6.5 4.5 KG EXTINGUISHER AS PER IS 2878 2004 POINT NO 6.4.2 AND 6.4.3 AND TABLE2 TABLE 2 POINT IV V
Reinforced rubber discharge hose fitted with polyethylene oval shape conical discharge horn with handle and adaptor SSBrass at the ends suitable for 4.56.8 kg CO2 extinguisher. The tube should have bursting pressure 275 kgfcm2 and length and bore should not be less than 01 mtr. and 10 mm respectively as per IS 2878 2004 reaffirmed 2010
DISCHARGE TUBE WITH NOZZLE SQUEEZE GRIP FOR DCP EXTINGUISHER OF 10 KG CAPACITY AS PER IS 2171 1999
Braided PVC rubber discharge tube fitted with discharge nozzle made up of plastic and adaptor SS Brass at the ends suitable for 10 kg DCP Type Extinguisher. The tube should have bursting pressure not less than 50kgfcm2 and length and bore should not be less than 750 mm and 12.5 mm respectively as per IS 2171 1999 reaffirmed 2010
RUBBER WASHER O RING TYPE FOR BA CYLINDER
As per IS 10245 part II8 1994 Reaffirmed 2023.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | CO2 GAS CARTRIDGE FOR USED IN 9 LT MECH FOAM FIRE EXTINGUISHERS CAPACITY 60 GM | The gas cartridge shall be manufactured from seamless or welded steel tube As per IS 4947 2006 Gas cartridge required for fire extinguisher having squeeze grip type puncturing and operating mechanism | 205 | pieces | [email protected] | 60 | |
| 2 | CAP ASSEMBLY SS OF 09 LTR WATER TYPE FIRE EXTINGUISHERS | The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 940 2003 reaffirmed 2008. | 50 | pieces | [email protected] | 60 | |
| 3 | CAP ASSEMBLY SS OF 09 LTR MECHANICAL FOAM FIRE EXTINGUISHERS | The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 10204 2001. | 50 | pieces | [email protected] | 60 | |
| 4 | RUBBER WASHER FOR DISCHARGE TUBE OF WATER FOAM TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 15683 2006 | Highly compressed and dense rubber washer having acid and alkali resistant. Outer dia 65mm inner dia 41 thickness 2.5 mm tolerance limit 1 mm. As per point iv of clause 5 Table 1 of IS 10204 2001 | 250 | pieces | [email protected] | 60 | |
| 5 | SIPHON TUBE FOR CAP ASSEMBLY OF WATER FOAM TYPE EXTINGUISHER CAP 09 LITRES | The syphon tube must be suitable for fit in the cap assembly and made of HDPE as per IS 10204 2001. | 50 | pieces | [email protected] | 60 | |
| 6 | DISCHARGE TUBE WITH NOZZLE FOR WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003 | Braided rubber plastic discharge tube fitted with discharge nozzle and adaptor SS Brass at the ends suitable for 09 ltrs Water Type Extinguisher. The discharge tube should have bursting pressure 40kgfcm2 and length and bore should not be less than 600 mm and 8 mm respectively as per IS 940 2003 reaffirmed 2008. | 50 | pieces | [email protected] | 60 | |
| 7 | DISCHARGE TUBE WITH FMB NOZZLE FOR FOAM TYPE EXTINGUISHER CAPACITY 9 LTR | Reinforced heavy duty PVC discharge tube fitted mini foam branch and adaptor SS Brass at the ends suitable for 09 ltr Mach. Foam Extinguisher. The tube should have bursting pressure 50kgfcm2 and length and bore should not be less than 600 mm and 8 mm respectively as per IS 10204 2001 | 50 | pieces | [email protected] | 60 | |
| 8 | RUBBER WASHER FOR CAP ASSEMBLY OF WATER TYPE EXTINGUISHER OF 9 LTR CAPACITY AS PER IS 940 2003 | Highly compressed and dense rubber washer having acid and alkali resistant as per IS 10204 2001 | 100 | pieces | [email protected] | 60 | |
| 9 | SAFETY PIN FOR SQUEEZE GRIP TYPE ALL EXTINGUISHERS | Safety clip shall be made of mild steel and suitable for 09ltr 9kg water Mach. Foam DCP type Extinguishers As per point viii of clause 5 Table 1 of IS 940 2003 | 200 | pieces | [email protected] | 60 | |
| 10 | CAP ASSEMBLY WITH DISCHARGE TUBE FOR WATER TYPE EXTINGUISHER CAPACITY 9 LTRS | The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 940 2003 reaffirmed 2008. | 25 | pieces | [email protected] | 60 | |
| 11 | CAP ASSEMBLY WITH DISCHARGE TUBE FOR MECH. FOAM TYPE EXTINGUISHER CAPACITY 9 LTRS | The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 10204 2001. | 25 | pieces | [email protected] | 60 | |
| 12 | DISCHARGE TUBE WITH PVC FMB NOZZLE FOR 09 LTRS MECHANICAL FOAM EXTINGUISHER | Reinforced heavy duty PVC discharge tube fitted mini foam branch and adaptor SS Brass at the ends suitable for 09 ltr Mach. Foam Extinguisher. The tube should have bursting pressure 50kgfcm2 and length and bore should not be less than 600 mm and 8 mm respectively as per IS 10204 2001 | 25 | pieces | [email protected] | 60 | |
| 13 | CAP ASSEMBLY FOR DCP TYPE EXTINGUISHERS CAP 9 ltr | The cap shall be screwed on the body up to a minimum of 16 mm effective length. At least 3 holes of not less than 2.5 mm diameter shall be drilled through the threaded portion of the cap to form vents. The cap having squeeze grip type CO2 gas cartridge puncture mechanism and also on off control discharge shall be provided. A swivel coupler nut shall be provided to screw up the cap on the neck ring. As per IS 2171 1999 reaffirmed 2009 | 25 | pieces | [email protected] | 60 | |
| 14 | RUBBER WASHER FOR CAP ASSEMBLE OF DCP TYPE 06 09 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006 | Highly compressed and dense rubber washer having acid and alkali resistant. Outer dia 65mm inner dia 41 thickness 2.5 mm tolerance limit 1 mm. As per point iv of clause 5 Table 1 of IS 10204 2001 As per IS 21711999 reaffirmed 2009 | 50 | pieces | [email protected] | 60 | |
| 15 | INNER SHELL TUBE FOR CAP ASSEMBLY OF DCP TYPE EXTINGUISHERS CAP 9 KG | The Inner shell tube shall be fitted in the cap and made of mild steel as per IS 2171 1999 reaffirmed 2009 | 50 | pieces | [email protected] | 60 | |
| 16 | DISCHARGE TUBE WITH NOZZLE FOR DCP EXTINGUISHER CAPACITY 09 KG AS PER IS 15683 2006 | Braided PVC rubber discharge tube fitted with discharge nozzle made up of plastic and adaptor SS Brass at the ends, suitable for 09 kg DCP Type Extinguisher. The tube should have bursting pressure not less than 50kgfcm2 as per IS 2171 1999 reaffirmed 2010 | 50 | pieces | [email protected] | 60 | |
| 17 | RUBBER WASHER FOR DISCHARGE TUBE OF DCP TYPE 0609 KGS CAPACITY EXTINGUISHER AS PER IS 15683 2006 | Highly compressed and dense rubber washer having acid and alkali resistant as per IS 2171 1999 reaffirmed 2010 | 50 | pieces | [email protected] | 60 | |
| 18 | RUBBER WASHER FOR CAP ASSEMBLY OF MECHANICAL FOAM EXTINGUISHER OF 50 LTR CAPACITY AS PER IS 13386 1992 | Highly compressed and dense rubber washer having acid and alkali resistant. Outer dia 86 mm inner dia 61 mm thickness 03 mm tolerance limit 01mm as per IS 13386 1992 reaffirmed 2007. | 30 | pieces | [email protected] | 60 | |
| 19 | CARRYING HANDLE WITH HAND GRIP FOR CO2 EXTINGUISHER OF 6.5 KG 4.5 KG CAPACITY AS PER IS 2878 2004 | Carrying handle shall be made of mild steel and non-conductor of electricity suitable for 4.5 kg CO2 extinguisher as per IS 2878 2004 reaffirmed 2010. | 30 | pieces | [email protected] | 60 | |
| 20 | DISCHARGE TUBE FOR CO2 EXTINGUISHER OF 9 KG CAPACITY AS PER IS 2878 2004 | Reinforced rubber discharge hose fitted with polyethylene oval shape conical discharge horn with handle and adaptor SS Brass at the ends suitable for 09 kg CO2 extinguisher. The tube should have bursting pressure 275 kgfcm2 and length and bore should not be less than 02 mtr and 10 mm respectively as per IS 2878 2004 reaffirmed 2010. | 10 | pieces | [email protected] | 60 | |
| 21 | DRAGGING PULLING HANDLE FOR 6.5 KG CAPACITY CO2 | Dragging and pulling Handle along with all fittings & trolley along with wheels, clamps and all accessories suitable for 6.5 6.8 CO2 kg Extinguishers. Trolley and carrying handle shall be made of mild steel. The dimension of the trolley shall be 132 mm by 28 mm by 20 mm as per IS 2878 2004 reaffirmed 2010. | 20 | pieces | [email protected] | 60 | |
| 22 | DISCHARGE HORN WITH HANDLE FOR CO2 EXTINGUISHER CAPACITY 4.5KG 6.8KG SIMILAR MATERILAS AS PER IS 2878 2004 | The Discharge Horn shall be Non conductor of electricity like polyethylene fibre glass and similar materials as per IS 28782004 reaffirmed 2010 | 30 | pieces | [email protected] | 60 | |
| 23 | DISCHARGE TUBE FOR CO2 6.5 4.5 KG EXTINGUISHER AS PER IS 2878 2004 POINT NO 6.4.2 AND 6.4.3 AND TABLE2 TABLE 2 POINT IV V | Reinforced rubber discharge hose fitted with polyethylene oval shape conical discharge horn with handle and adaptor SSBrass at the ends suitable for 4.56.8 kg CO2 extinguisher. The tube should have bursting pressure 275 kgfcm2 and length and bore should not be less than 01 mtr. and 10 mm respectively as per IS 2878 2004 reaffirmed 2010 | 100 | pieces | [email protected] | 60 | |
| 24 | DISCHARGE TUBE WITH NOZZLE SQUEEZE GRIP FOR DCP EXTINGUISHER OF 10 KG CAPACITY AS PER IS 2171 1999 | Braided PVC rubber discharge tube fitted with discharge nozzle made up of plastic and adaptor SS Brass at the ends suitable for 10 kg DCP Type Extinguisher. The tube should have bursting pressure not less than 50kgfcm2 and length and bore should not be less than 750 mm and 12.5 mm respectively as per IS 2171 1999 reaffirmed 2010 | 20 | pieces | [email protected] | 60 | |
| 25 | RUBBER WASHER O RING TYPE FOR BA CYLINDER | As per IS 10245 part II8 1994 Reaffirmed 2023. | 30 | pieces | [email protected] | 60 |
Reverse Auction Schedule
Start
18-Jun-2025, 7:00 pm
End
21-Jun-2025, 8:00 pm
Duration: 73 hours
Reverse Auction Document
✅ RA concluded. Check financial results for final rankings.
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | ********** Under PMA | - | 15-03-2025 22:28:21 | |
| 2 | ********** Under PMA | - | 21-03-2025 14:27:21 | |
| 3 | ********** Under PMA | - | 21-03-2025 18:47:39 | |
| 4 | ********** Under PMA | - | 20-03-2025 19:01:41 | |
| 5 | ********** Under PMA | - | 21-03-2025 15:32:09 | |
| 6 | ********** Under PMA | - | 21-03-2025 11:11:03 |
Contract / Result Documents 3
Please sign in or create an account to view contract details and download result documents.
Frequently Asked Questions
Key insights about WEST BENGAL tender market
What are the eligibility requirements for participating in the tender?
The eligibility requirements include being a registered entity in the relevant jurisdiction, demonstrating compliance with local procurement regulations, and providing necessary certifications related to fire safety products. Vendors must also possess the capacity to deliver a total of 1,575 CO2 gas cartridges that meet technical specifications outlined in the tender. It's crucial for businesses to validate their operational and quality credentials to qualify.
What certifications are required for the CO2 gas cartridges?
To ensure compliance, bid submissions must include certifications that demonstrate adherence to national and international standards for fire safety equipment. This typically involves manufacturing certifications, quality assurance documentation, and safety compliance certificates that illustrate the vendor's commitment to maintaining high quality and safety standards.
How should vendors register for the tender?
The registration process for this tender involves creating an account on the designated tender platform, filling out necessary forms, and submitting required documents, including proof of registration and eligibility. Vendors need to follow the outlined procedures thoroughly to ensure their participation in the evaluation process for the tender.
What are the payment terms outlined in the tender?
Typically, payment terms in government tenders require upfront payment or a portion of it as an advance, with the remaining balance payable upon the successful delivery and installation of the CO2 gas cartridges. Vendors should refer to the specifics in the tender documentation to understand full obligations and compliance requirements.
How will the evaluation and selection process be conducted?
The evaluation and selection process will include a rigorous assessment of technical and financial proposals submitted by bidders. Factors like compliance with specifications, overall pricing, vendor experience, and past performance in delivering similar products will significantly influence the overall decision-making process. Vendors will be notified of the results as per the tender's communication policies.
Are there benefits for Micro, Small, and Medium Enterprises (MSEs) in this tender?
While this tender does not specifically outline benefits for Micro, Small and Medium Enterprises (MSEs), vendors should highlight any special programs or assistance they may offer as part of their proposals. The government encourages local content and procurement practices, which may indirectly support small and medium-sized enterprises in participating in such tenders.
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 7
GeM-Bidding-7564235.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS