TenderDekho Logo
GEM

Bids are Invited For Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mil in CHAMOLI, UTTARAKHAND

Bid Publish Date

14-May-2025, 9:21 pm

Bid End Date

05-Jun-2025, 9:00 am

EMD

₹92,000

Progress

RA
Issue14-May-2025, 9:21 pm
Reverse AuctionCompleted
AwardCompleted
Explore all 5 tabs to view complete tender details

Quantity

3626

Category

Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mild steel structure alongwith 4000mm x 4000mm multipurpose room with false ceiling

Bid Type

Two Packet Bid

Categories 58

A tender has been published for Indian Army Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mild steel structure alongwith 4000mm x 4000mm multipurpose room with false ceiling, PUF insulation Door single shutter of size 900mm x 2100mm, Aluminium frame windows of size 1200mm x 1200mm, PPGL Sheets 0. 80 mm thick for side wall compatible to structure, PPGL sheets 0. 80mm thick of size 2700x1050mm, Polycarbonate transparent roof sheet, Ridge cover 32200mm long and 0. 90mm thick, SDS Screw, Bituminous Washers of ISI Mark, GI Washer of ISI Mark, Lightening Conductor, 20W rechargeable emergency Inverter LED Light bulb, Switch piano flush type 5 Amp, PVC switch board 6 way, PVC Casing capping tee bend, PVC Casing capping L bend, PVC casing and capping of size 25 mm, PVC Square board 4 inch x 4 inch, Wire Single Core Copper Conductor 1. 5 Sqmm, MCB Box 2 way SPN, Switch piano type 5 A. one way switch 240 Volt 50 Hz, MCB 32 Amp SP, Insulation Tape 15 mtr each, Ceiling Rose, Socket 6 AMP, Star Screw full thread 25 mm Each packet 320 Nos, Provision of fire extinguisher 6. 0 Kgs ABC Dry powder stored pressure type, Cement in polythene bags 50 kgs each OPC 43 grade, Crushed Stone Aggregate 20 mm graded confirming to IS 383 of 1970, Coarse Sand confirming to IS 383 of 1970, Hard core of broken stone aggregate of size 45 to 63 mm, Water proofing compound, TMT Bar 16mm dia, TMT Bar 12mm dia, TMT Bar 8mm dia, Connected stores as per final design in CHAMOLI, UTTARAKHAND. Quantity: 3626 by. Submission Deadline: 05-06-2025 09: 00: 00. Check eligibility and apply.

Documents 5

GeM-Bidding-7822293.pdf

Main Document

BOQ Document

BOQ

BOQ Document

BOQ

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Roof sheet 0 point 60 mm Pre painted Galvanised steel sheet,Hollow Steel iron,Anlge Iron,Nut and bo

Armed Forces Tribunal

KINNAUR, HIMACHAL PRADESH

Posted: 6 May 2025
Closed: 27 May 2025
GEM

Roof sheet 0 point 60 mm Pre painted Galvanised steel sheet,Hollow Steel iron,Anlge Iron,Nut and bo

Armed Forces Tribunal

KINNAUR, HIMACHAL PRADESH

Posted: 9 May 2025
Closed: 30 May 2025
GEM

Large store shelter 18.30mx6.10m with 1.50m Varandah,Cement OPC 43 Grade packed in HDPE bag each 50

Indian Army

TAWANG, ARUNACHAL PRADESH

Posted: 19 March 2025
Closed: 9 April 2025
GEM

PPGI Sheet,Window glass,Wash hand basin single bowl of size 900x400mm,EWC with Low level flushing,S

Indian Army

RAJAURI, JAMMU & KASHMIR

Posted: 26 September 2025
Closed: 7 October 2025
GEM

Roof sheet 0 point 60 mm,Hollow Steel iron,Anlge Iron,Nut and bolt incl 2mm thick 02 Nos washer per

Armed Forces Tribunal

KINNAUR, HIMACHAL PRADESH

Posted: 14 December 2024
Closed: 4 January 2025
GEM

Bill of Quantities (BOQ) 36 Items

Item # Title Description Quantity Unit Consignee Delivery (Days)
1 Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mild steel structure alongwith 4000mm x 4000mm multipurpose room with false ceiling As per TS and drawing attached 1 ls oc418i 45
2 PUF insulation Door single shutter of size 900mm x 2100mm As per TS and drawing attached 1 nos oc418i 45
3 Aluminium frame windows of size 1200mm x 1200mm As per TS and drawing attached 1 nos oc418i 45
4 PPGL Sheets 0.80 mm thick for side wall compatible to structure As per TS and drawing attached 250 sqm oc418i 45
5 PPGL sheets 0.80mm thick of size 2700x1050mm As per TS and drawing attached 144 nos oc418i 45
6 Polycarbonate transparent roof sheet As per TS and drawing attached 6 nos oc418i 45
7 Ridge cover 32200mm long and 0.90mm thick As per TS and drawing attached 1 set oc418i 45
8 SDS Screw As per TS and drawing attached 1,200 nos oc418i 45
9 Bituminous Washers of ISI Mark As per TS and drawing attached 5 pkt oc418i 45
10 GI Washer of ISI Mark As per TS and drawing attached 6 pkt oc418i 45
11 Lightening Conductor As per TS and drawing attached 1 set oc418i 45
12 20W rechargeable emergency Inverter LED Light bulb As per TS and drawing attached 9 nos oc418i 45
13 Switch piano flush type 5 Amp As per TS and drawing attached 11 nos oc418i 45
14 PVC switch board 6 way As per TS and drawing attached 2 nos oc418i 45
15 PVC Casing capping tee bend As per TS and drawing attached 10 nos oc418i 45
16 PVC Casing capping L bend As per TS and drawing attached 10 nos oc418i 45
17 PVC casing and capping of size 25 mm As per TS and drawing attached 60 rm oc418i 45
18 PVC Square board 4 inch x 4 inch As per TS and drawing attached 27 nos oc418i 45
19 Wire Single Core Copper Conductor 1.5 Sqmm As per TS and drawing attached 3 roll oc418i 45
20 MCB Box 2 way SPN As per TS and drawing attached 1 nos oc418i 45
21 Switch piano type 5 A. one way switch 240 Volt 50 Hz As per TS and drawing attached 10 nos oc418i 45
22 MCB 32 Amp SP As per TS and drawing attached 2 nos oc418i 45
23 Insulation Tape 15 mtr each As per TS and drawing attached 5 nos oc418i 45
24 Ceiling Rose As per TS and drawing attached 9 nos oc418i 45
25 Socket 6 AMP As per TS and drawing attached 2 nos oc418i 45
26 Star Screw full thread 25 mm Each packet 320 Nos As per TS and drawing attached 5 pkt oc418i 45
27 Provision of fire extinguisher 6.0 Kgs ABC Dry powder stored pressure type As per TS and drawing attached 2 nos oc418i 45
28 Cement in polythene bags 50 kgs each OPC 43 grade As per TS and drawing attached 564 bags oc418i 45
29 Crushed Stone Aggregate 20 mm graded confirming to IS 383 of 1970 As per TS and drawing attached 101 cum oc418i 45
30 Coarse Sand confirming to IS 383 of 1970 As per TS and drawing attached 67 cum oc418i 45
31 Hard core of broken stone aggregate of size 45 to 63 mm As per TS and drawing attached 62 cum oc418i 45
32 Water proofing compound As per TS and drawing attached 23 kgs oc418i 45
33 TMT Bar 16mm dia As per TS and drawing attached 367 kgs oc418i 45
34 TMT Bar 12mm dia As per TS and drawing attached 430 kgs oc418i 45
35 TMT Bar 8mm dia As per TS and drawing attached 227 kgs oc418i 45
36 Connected stores as per final design As per TS and drawing attached 1 ls oc418i 45

Required Documents

1

Experience Criteria

2

Past Performance

3

Bidder Turnover

4

Certificate (Requested in ATC)

5

OEM Authorization Certificate

6

OEM Annual Turnover

7

Additional Doc 1 (Requested in ATC)

8

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

9

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Reverse Auction Schedule

Completed

Start

08-Jun-2025, 7:00 pm

End

09-Jun-2025, 7:00 pm

Duration: 24 hours

Reverse Auction Document

✅ RA concluded. Check financial results for final rankings.

Reverse Auction Results Final Prices

These are the final prices after the reverse auction event. Prices may be lower than initial bids.

Rank Seller Final Price Item
L1SHREE ENTERPRISES(MSE,MII)   Under PMA Winner ₹22,79,000Item Categories : Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mil
L2M/S BHAGWATI TRADERS (MSE,MII)   Under PMA₹24,44,604Item Categories : Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mil
L3SHYAM ASSOCIATES (MSE,MII)   Under PMA₹25,56,015Item Categories : Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mil
L4M/S A.S. ENTERPRISES (MSE,MII)   Under PMA₹26,12,500Item Categories : Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mil
L5GS Innovations (MSE,MII)   Under PMA₹26,50,000Item Categories : Fabrication and supplying of structural stores for Veh Shed of size 32200 x 8230 x 4000mm using mil

🎉 L1 Winner

SHREE ENTERPRISES(MSE,MII)   Under PMA

Final Price: ₹22,79,000

Frequently Asked Questions

Key insights about UTTARAKHAND tender market

What are the eligibility requirements for GEM/2025/B/6214779?

The eligibility requirements include being a registered entity, possessing adequate experience in similar fabrication projects, and holding all necessary certifications. Bidders must demonstrate their capability to execute the project as specified in the tender documents.

What technical specifications must be met for the GEM/2025/B/6214779 tender?

Bidders are required to adhere to specific technical specifications, including the use of mild steel structures, provision of Aluminium frame windows, PPGL sheets, and compliance with quality standards set forth by the Ministry of Defence. Details of the required materials and their specifications are listed within the tender documentation.

How is the Earnest Money Deposit (EMD) structured for this tender?

The Earnest Money Deposit (EMD) must be submitted with the bid and serves as security for the tender processes. The amount and format of the EMD are provided in the tender documents. EMD is critical as it demonstrates the bidder's commitment to the project and is refundable under certain conditions.

What are the submission methods and key timelines for GEM/2025/B/6214779?

Bids must be submitted electronically via the designated platform outlined in the tender documentation. Adherence to deadlines is critical as late submissions will not be considered. All key timelines for submission, evaluation, and award notifications are distinctly outlined in the tender instructions.

Are there any benefits for Micro, Small, and Medium Enterprises (MSEs) in this tender?

Yes, there are specific provisions aimed at supporting Micro, Small, and Medium Enterprises (MSEs) and startups. These may include relaxed eligibility criteria, simplified submission processes, and potential incentives in evaluation to promote their participation in government tenders, in alignment with the 'Make in India' initiative and local content requirements.