Bids are Invited For Bath Stool PVC,Bed Hard 6x3,Chair Writing,Peg Table,Receptacle PVC,Sofa Chairs with cushion,Table B in SOUTH ANDAMAN, ANDAMAN & NICOBAR

Bed Hard 6x3. Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mmx38mm MS square pipe.18mmx18mm MS square pipe shall be provided in the inner of head board frame/foot board frame as shown in drg.18mm thick both side decorative prelaminated particle board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board/foot board. 25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed.All metal /iron work shall be treated with synthetic enamel black after doing two coats of metal primer.Rest all as per drg. Drg No FD/E6/MAP/08(R)

DPeg Table Overall size shall be 450mm long,300mm wide and 380mm high. Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in positition.Two nos of top rails of section 20mmx40mm of teak wood shall be provided connecting legs. Two bottom rails of size 20mmx40mm shall be fixed between the legs.A centre stifferners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of table shall be of 18mm thick prelaminated MDF board of approved shade .4mm thick teak wood beading shall be french polished with high. Drg No FD-25,277,236

Sofa Chairs with cushion. Overall size of one piece shall be 670mm long, 745mm wide and 530mm high up to arm rest level. All wood shall be of first class teak wood (MP). Legs of sofa set shall be 70mmx35mm in section teak wood. Front legs shall be joined by 100mmx35mm in section wooden rail in front. Front and rear legs shall be joined with 100mmx35mm in section wooden rails in sides. Three wooden bearers of 40mmx40mm in section shall be provided below the seat to support the wooden battens of 50mmx20mm in section. Arm rests shall be made to shape out of 70mmx35mm in section wooden horizontal at bottom and top and vertical sides 70mmx35mm in section wooden horizontal at bottom and top and vertical sides slanting as 560mm. 30mmx50mm in section wooden rail to support back frame shall be provided joining the rear legs. 100mm thick seat cushions and back cushions shall be of size 530mmx560mm. The cushion shall be of cool foam or any other superior quality foam of 32 or 48 density as approved by Engineer in charge. Cushions shall be covered with tapestry cloth of not less than Rs 400 per metre or as directed by Engineer in charge. All wood surfaces exposed to view when placed in position shall be French polished with lacquer finish. Drg No FD-281,373

Table Centre. Overall size shall be 1200mm long, 600mm wide and 400mm high. All wood shall be of seasoned 1st class hardwood teakwood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top.Legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated particle board exterior grade of approved shade with 4mm thick teak wood beading all round the edges of both the tops.25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. Rest all as per drg. All exposed wooden surfaces shall be french polished with two coats after preparation of surfaces. Drg No FD-274,235

Table Dressing Gents. Overall size shall be 900mm long, 300mm wide and 150mm high at bottom with support of mirror as 1115mm high. The frame of mirror shall be overall size of 410mm wide and 790mm high, fixed at 150mm from top of lower base.The entire box shall be made of 12mm thick prelaminated MDF board except back and bottom which shall be of 12mm thick plywood .The sides of the drawers shall be made of 12mm thick commercial ply with bottom of 6 mm ply and front of 12mm thick prelaminated MDF board.The mirror of 380mmx760mm shall be provided with its wooden frame made of 25mmx35mm teak wood battens.The bach shall be of 6mm thick plywood.5.5mm thick mirror distortion free shall be provided on 6mm thick plywood backing..3mm thick flat iron key plates of MS.Two knobs of aluminium anodized dark brown in shade shall be provided to both the drawers. 25mmx25mm in section shall be provided at top of mirror and painted with black paint. All wood surfaces shall be french polished with high gloss finish. Drg No FD-230,379