Procurement Opportunity: Chipping Scrapping Painting the whole body chassis etc., by conventional method of spray painting, in NICOBAR, ANDAMAN & NICOBAR
Bid Publish Date
28-Jun-2025, 4:40 pm
Bid End Date
28-Jul-2025, 4:00 pm
Location
Progress
Quantity
5
Category
Chipping Scrapping Painting the whole body chassis etc., by conventional method of spray painting, including cost of all duties, GST etc., complete-Approximate area- 602 Sqm
Bid Type
Two Packet Bid
Categories
68
A tender has been published for Andaman Lakshadweep Harbour Works (alhw) Chipping Scrapping Painting the whole body chassis etc. , by conventional method of spray painting, including cost of all duties, GST etc. , complete-Approximate area- 602 Sqm, Cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness M. S sheet, M. S angles, M. S. Channel, MS grills, Approximately 1. 85 MT. , Aligning the wiring and electrical cables of the crane properly and servicing of self-starter and alternator, replacing the new cabin fans, including cost of all taxes and duties, GST, etc complete, Providing and fixing stickers in various colours all round the vehicles as per MV Act, painting name boards on both sides of the Crane including cost of all taxes and duties, GST etc complete. , Removing all the glasses from operator cabin replacing the beedings, wind shield repairing door channels, including cost of all taxes and duties, GST etc. , complete in NICOBAR, ANDAMAN & NICOBAR. Quantity: 5 by. Submission Deadline: 28-07-2025 16: 00: 00. Check eligibility and apply.
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Chipping Scrapping Painting the whole body chassis etc., by conventional method of spray painting, including cost of all duties, GST etc., complete-Approximate area- 602 Sqm , Cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness M.S sheet, M.S angles, M.S.Channel, MS grills, Approximately 1.85 MT. , Aligning the wiring and electrical cables of the crane properly and servicing of self-starter and alternator, replacing the new cabin fans, including cost of all taxes and duties, GST, etc complete , Providing and fixing stickers in various colours all round the vehicles as per MV Act, painting name boards on both sides of the Crane including cost of all taxes and duties, GST etc complete. , Removing all the glasses from operator cabin replacing the beedings, wind shield repairing door channels, including cost of all taxes and duties, GST etc., complete
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
GeM-Bidding-7999203.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
5 Items Sign in to view GEM price trends Sign in for GEM prices
Chipping Scrapping Painting the whole body chassis etc., by conventional method of spray painting, including cost of all duties, GST etc., complete-Approximate area- 602 Sqm
Chipping, Scrapping & Painting the whole body & chassis etc., by conventional method of spray painting, after leveling the body perfectly so as to minimise the use of metal paste and putty, using two coats of high quality of automotive paints of approved colour over prime PS gray etc., rubbing and polishing, including cost of all materials, paints, thinner, hire charges of painting guns & compressor, cost of all labour charges, cost of tools & plants, including cost of all duties, GST etc., complete (Approximate area- 602 Sqm)
Cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness M.S sheet, M.S angles, M.S.Channel, MS grills, Approximately 1.85 MT.
Cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness M.S sheet, M.S angles, M.S.Channel, MS grills, all Radiator line pipes with suitable clamp and steel pipe are to be replaced with M.S. pipe etc as per the original shape and sizes with alignment by gas cutting, gas weilding, arc welding etc by using standard welding rods and the works includes replacing of newly like air cleaner, silencer and other body components in position, providing door hinges, window & door locks etc, as per direction of the EIC including cost of all labour charges, welding materials, gas welding materials, minor tools and plants and hire charges of welding and Gas plants, cabin locks, all materials required for fabrication works, transportation and handling charges, cost of consumable, hinges, tower bolts etc.,complete. including cost of 4.00 mm MS steel, MS angles, M.S.Channel, M.S. pipes etc., complete. Including Transportation charges. The work has to be cariied out as per the direction of EIC. Approximately 1.85 MT.
Aligning the wiring and electrical cables of the crane properly and servicing of self-starter and alternator, replacing the new cabin fans, including cost of all taxes and duties, GST, etc complete
Aligning the wiring and electrical cables of the crane properly without deviation and servicing of self starter and alternator, replacing the new cabin fans, focus lights, cabin lights (Engine side, Drum side & Operator side) and giving connection including cost of all ISI marked spares parts, all labour charges, transportation charges, including cost of all taxes and duties, GST, etc., complete
Providing and fixing stickers in various colours all round the vehicles as per MV Act, painting name boards on both sides of the Crane including cost of all taxes and duties, GST etc complete.
Providing and fixing stickers in various colours all round the vehicles as per MV Act, painting name boards on both sides of the Crane and as per the direction of EIC, including cost of all materials, labour charges, transportation charges, including cost of all taxes and duties, GST etc., complete.
Removing all the glasses from operator cabin replacing the beedings, wind shield repairing door channels, including cost of all taxes and duties, GST etc., complete
Removing all the glasses from operator cabin replacing the beedings, wind shield repairing door channels, that includes providing and fixing rubber beeding, door and window glasses without any deviation including cost of rubber beeding, door and window glass, old removed glasses may be reused for this work etc., as per the direction of EIC, including cost of all labour charges, materials, transportation charges, minor tools and plants, including cost of all taxes and duties, GST etc., complete
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Chipping Scrapping Painting the whole body chassis etc., by conventional method of spray painting, including cost of all duties, GST etc., complete-Approximate area- 602 Sqm | Chipping, Scrapping & Painting the whole body & chassis etc., by conventional method of spray painting, after leveling the body perfectly so as to minimise the use of metal paste and putty, using two coats of high quality of automotive paints of approved colour over prime PS gray etc., rubbing and polishing, including cost of all materials, paints, thinner, hire charges of painting guns & compressor, cost of all labour charges, cost of tools & plants, including cost of all duties, GST etc., complete (Approximate area- 602 Sqm) | 1 | job | jeecbay | 60 | |
| 2 | Cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness M.S sheet, M.S angles, M.S.Channel, MS grills, Approximately 1.85 MT. | Cutting and removing the rusted portion of the cabin and renewing the portion with new 4 mm thickness M.S sheet, M.S angles, M.S.Channel, MS grills, all Radiator line pipes with suitable clamp and steel pipe are to be replaced with M.S. pipe etc as per the original shape and sizes with alignment by gas cutting, gas weilding, arc welding etc by using standard welding rods and the works includes replacing of newly like air cleaner, silencer and other body components in position, providing door hinges, window & door locks etc, as per direction of the EIC including cost of all labour charges, welding materials, gas welding materials, minor tools and plants and hire charges of welding and Gas plants, cabin locks, all materials required for fabrication works, transportation and handling charges, cost of consumable, hinges, tower bolts etc.,complete. including cost of 4.00 mm MS steel, MS angles, M.S.Channel, M.S. pipes etc., complete. Including Transportation charges. The work has to be cariied out as per the direction of EIC. Approximately 1.85 MT. | 1 | job | jeecbay | 60 | |
| 3 | Aligning the wiring and electrical cables of the crane properly and servicing of self-starter and alternator, replacing the new cabin fans, including cost of all taxes and duties, GST, etc complete | Aligning the wiring and electrical cables of the crane properly without deviation and servicing of self starter and alternator, replacing the new cabin fans, focus lights, cabin lights (Engine side, Drum side & Operator side) and giving connection including cost of all ISI marked spares parts, all labour charges, transportation charges, including cost of all taxes and duties, GST, etc., complete | 1 | job | jeecbay | 60 | |
| 4 | Providing and fixing stickers in various colours all round the vehicles as per MV Act, painting name boards on both sides of the Crane including cost of all taxes and duties, GST etc complete. | Providing and fixing stickers in various colours all round the vehicles as per MV Act, painting name boards on both sides of the Crane and as per the direction of EIC, including cost of all materials, labour charges, transportation charges, including cost of all taxes and duties, GST etc., complete. | 1 | job | jeecbay | 60 | |
| 5 | Removing all the glasses from operator cabin replacing the beedings, wind shield repairing door channels, including cost of all taxes and duties, GST etc., complete | Removing all the glasses from operator cabin replacing the beedings, wind shield repairing door channels, that includes providing and fixing rubber beeding, door and window glasses without any deviation including cost of rubber beeding, door and window glass, old removed glasses may be reused for this work etc., as per the direction of EIC, including cost of all labour charges, materials, transportation charges, minor tools and plants, including cost of all taxes and duties, GST etc., complete | 1 | job | jeecbay | 60 |
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
OEM Annual Turnover *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | M/S CHARMING CONSTRUCTION & CHARMING SECURITY SERVICE Under PMA | - | 09-07-2025 13:26:22 | |
| 2 | M/S MUBARAK REFRIGERATION Under PMA | - | 24-07-2025 09:56:58 |
Financial Results
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | M/S CHARMING CONSTRUCTION & CHARMING SECURITY SERVICE(MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : Chipping Scrapping Painting the whole body chassis etc., by conventional method of spray painting, | |
| L2 | M/S MUBARAK REFRIGERATION (MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : Chipping Scrapping Painting the whole body chassis etc., by conventional method of spray painting, |
Contract / Result Documents 1
Please sign in or create an account to view contract details and download result documents.
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 4
GeM-Bidding-7999203.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS