Bids are Invited For THERMIT WELDING TOOL SET,AT WELDING TRIMMER,RAIL PROFILE WELD GRINDER,INSPECTION CUM CHIPPING HAMME in ALLAHABAD, UTTAR PRADESH
Bid Publish Date
06-Aug-2026, 11:54 am
Bid End Date
27-Aug-2026, 3:00 pm
EMD
₹2,15,000
Value
₹1,07,51,868
Location
Progress
Dedicated Freight Corridor Corporation Of India Limited announces a tender for THERMIT WELDING TOOL SET, AT WELDING TRIMMER, RAIL PROFILE WELD GRINDER, INSPECTION CUM CHIPPING HAMMER, WELDING GAUGE, SCHMIDTS HAMMER, WOODEN BLOCKS, HOOK BOLTS FOR BRIDGES, T-BOLT FOR CHANNEL SLEEPER, TAPERED SPLIT PIN, SINGLE COIL SPRING WASHER, INNER AND OUTER CLIP FOR CHANNEL SLEEPER, RAIL DISC CUTTER WHEEL STONE, RAIL DRILLING TOOL, CHAMFERING KIT, FISH PLATE 1 mtr LONG, HAMMER, DIGITAL TOE LOAD MEASURING DEVICE, RAIL SCREW SEJ IN and OUT RT3916 and RT3915, BOLT 25 X 100 WITH NUT, RUBBER PADS FOR OWG BR SEJs OF SEJ RT4159, 10 MM THICK GRSP FOR CHANNEL SLEEPER T5156, 6 MM GRSP FOR GUARD T5163, Guard rail bolt, Joggled fish plate, P way Kit, Versine measurement kit, TRACK GAUGE CUM LEVEL, Retro Reflective Tape 45m long, ERC J Type, HTS Bolt grade 10. 9S, Grease Graphite in ALLAHABAD, UTTAR PRADESH. Quantity: 31208. Submission Deadline: 27-08-2026 15: 00: 00. Last date to apply is approaching fast!
Tender Data
Bid Details
Quantity
31208
Category
Joggled fish plate
Bid Type
Two Packet Bid
Bid Validity
90 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MII Purchase Preference
Yes
MII Preference Band
L1+20%
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Min. Avg. Annual Turnover
53
Past Performance
30 %
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
THERMIT WELDING TOOL SET , AT WELDING TRIMMER , RAIL PROFILE WELD GRINDER , INSPECTION CUM CHIPPING HAMMER , WELDING GAUGE , SCHMIDTS HAMMER , WOODEN BLOCKS , HOOK BOLTS FOR BRIDGES , T-BOLT FOR CHANNEL SLEEPER , TAPERED SPLIT PIN , SINGLE COIL SPRING WASHER , INNER AND OUTER CLIP FOR CHANNEL SLEEPER , RAIL DISC CUTTER WHEEL STONE , RAIL DRILLING TOOL , CHAMFERING KIT , FISH PLATE 1 mtr LONG , HAMMER , DIGITAL TOE LOAD MEASURING DEVICE , RAIL SCREW SEJ IN and OUT RT3916 and RT3915 , BOLT 25 X 100 WITH NUT , RUBBER PADS FOR OWG BR SEJs OF SEJ RT4159 , 10 MM THICK GRSP FOR CHANNEL SLEEPER T5156 , 6 MM GRSP FOR GUARD T5163 , Guard rail bolt , Joggled fish plate , P way Kit , Versine measurement kit , TRACK GAUGE CUM LEVEL , Retro Reflective Tape 45m long , ERC J Type , HTS Bolt grade 10.9S , Grease Graphite
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
8
Payment Timelines
Payments shall be made to the Seller within 45 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
45
Delivery Locations
1
Delivery Cities
Prayagraj
Delivery Pincodes
211012
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Nitish Kumar Batham | 211012,DFCCIL OCC Building. 2nd Floor, Subedarganj, Opposite IOCL Complex, Jhalwa, Allahabad | Prayagraj | Uttar Pradesh | 211012 | 1 | 45 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
GeM-Bidding-9633224.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
34 Items Sign in to view GEM price trends Sign in for GEM prices
THERMIT WELDING TOOL SET
rail welding equipments by the process of thermit welding with all components comprisng appprox. 30 Nos including welding shoe, tong etc
AT WELDING TRIMMER
Hydraulic Rail welding trimmer for 60 kg rails with double action i.e. trimming by hydraulic action and as well as by hand trimming option for emergency with two shear blades. Operateble with hydraulic cylinders with action control valve duly fitted with Honda engine petrol start kerosene run engine. Complete set with hydraulic hoses etc.
RAIL PROFILE WELD GRINDER
Rail profile weld grinding machine for 60 kg rails duly fitted with electric grinder of superior quality, complete machine with rail rollers for easy movement in forward -back and in angular direction for grinding rail in true profile after welding of rails as per railway specification.
INSPECTION CUM CHIPPING HAMMER
As per following specification, Inspection cum chipping hammer for checking hallow pocket or honeycomb in masonry and concrete structure including PSC by tapping and for examining the extent of corrosion, adherence of paint on girders, and for removing loose scales. Having one end pointed and other end flat head approx.wt. 700gms with rubber grip handle.
WELDING GAUGE
As per following specification, Digital Welding gauge to measure welding size in angular-vertical-horizontal directions
SCHMIDTS HAMMER
As per following specification- Schmidts hammer digital cum manual type with both type of i.e. digital reading and manual reading simultaneously for assessing the compressive strength of concrete structure by NDT method with measuring range 10 to 70 Nm complete unit with extra impact spring , grinding stone for cleaning tip of the unit duly packed in carrying case along with manual.
WOODEN BLOCKS
Hard wood wooden blocks for using on the track approx size 20in.x8in.x5in.
HOOK BOLTS FOR BRIDGES
HOOK BOLTS FOR BRIDGES
T-BOLT FOR CHANNEL SLEEPER
T-BOLT FOR CHANNEL SLEEPER
TAPERED SPLIT PIN
TAPERED SPLIT PIN
SINGLE COIL SPRING WASHER
SINGLE COIL SPRING WASHER
INNER AND OUTER CLIP FOR CHANNEL SLEEPER
INNER AND OUTER CLIP FOR CHANNEL SLEEPER
RAIL DISC CUTTER WHEEL STONE
Abrasive rail disc cutter stone wheel size 16inch x 3 mm make Norton or Carborundum or Bosch orEpidoorCutfine or equivalent.
RAIL DRILLING TOOL
Rail drilling tool for drilling 31.5 mm dia holes having helical flute , conical upper shank make Addison or IT or JK orMiranda or equivalent.
RAIL DRILLING TOOL
Rail drilling tool for drilling 26.5 mm dia holes having helical flute , conical upper shank make Addison or IT or JK or Miranda or equivalent.
RAIL DRILLING TOOL
Rail drilling tool for drilling 18 mm dia holes having helical flute , conical upper shank make Addison or IT or JK or Miranda or equivalent.
CHAMFERING KIT
Chamfering Kit for chamfering holes of rails from both sides of the holes. Kit will include torque wrench along with the ratchet, 1 set (2pcs) of 28mm and 1set (2pcs) of 32mm of HSS chamfering tools for chamfering holes simultaneously from inside and outside of rails manually. Complete kit as per Rly specification.
FISH PLATE 1 mtr LONG
Fish plate 1mtr long for 60 kg rail complete pair with nut bolt and washer as per RDSO specification.
HAMMER
As per following specification, Hammer 5kg complete with woodenorbamboo handle.
DIGITAL TOE LOAD MEASURING DEVICE
DIGITAL TOE LOAD MEASURING DEVICE- As per following specification Digital toe load measuring shall be provided with load cell of 2000kg cap. with display resolution of 1 kg. A. Display alpha numeric . B. Operating rail temprature -5C to 70C. C. Measurement accuracy +or-5percent of rated capacity of load cell. D. Fast rturn to zero E. Load cell shall be compressive type.F. Should be able to transfer data from display unit to PC through USB port. G. Complete unit shall be duly packed in a casewith its essential accesories like holding clamp , operating lever etc. Complete equipment as per railway specification.
RAIL SCREW SEJ IN and OUT RT3916 and RT3915
RAIL SCREW SEJ IN and OUT RT3916 and RT 3915
BOLT 25 X 100 WITH NUT
BOLT 25 X 100 WITH NUT
RUBBER PADS FOR OWG BR SEJs OF SEJ RT4159
RUBBER PADS FOR OWG BR SEJs OF SEJ RT 4159
10 MM THICK GRSP FOR CHANNEL SLEEPER T5156
10 MM THICK GRSP FOR CHANNEL SLEEPER T 5156
6 MM GRSP FOR GUARD T5163
6 MM GRSP FOR GUARD T 5163
Guard rail bolt
Guard rail bolt T5164
Joggled fish plate
Joggled fish plate
P way Kit
P way Kit
Versine measurement kit
Versine measurement kit
TRACK GAUGE CUM LEVEL
TRACK GAUGE CUM LEVEL
Retro Reflective Tape 45m long
Retro Reflective Tape 45m long
ERC J Type
ERC J Type
HTS Bolt grade 10.9S
HTS Bolt grade 10.9S complete with nit and washer.
Grease Graphite
Grease Graphite
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | THERMIT WELDING TOOL SET | rail welding equipments by the process of thermit welding with all components comprisng appprox. 30 Nos including welding shoe, tong etc | 1 | nos | apm_engg_pryj_e | 45 | |
| 2 | AT WELDING TRIMMER | Hydraulic Rail welding trimmer for 60 kg rails with double action i.e. trimming by hydraulic action and as well as by hand trimming option for emergency with two shear blades. Operateble with hydraulic cylinders with action control valve duly fitted with Honda engine petrol start kerosene run engine. Complete set with hydraulic hoses etc. | 1 | nos | apm_engg_pryj_e | 45 | |
| 3 | RAIL PROFILE WELD GRINDER | Rail profile weld grinding machine for 60 kg rails duly fitted with electric grinder of superior quality, complete machine with rail rollers for easy movement in forward -back and in angular direction for grinding rail in true profile after welding of rails as per railway specification. | 1 | nos | apm_engg_pryj_e | 45 | |
| 4 | INSPECTION CUM CHIPPING HAMMER | As per following specification, Inspection cum chipping hammer for checking hallow pocket or honeycomb in masonry and concrete structure including PSC by tapping and for examining the extent of corrosion, adherence of paint on girders, and for removing loose scales. Having one end pointed and other end flat head approx.wt. 700gms with rubber grip handle. | 6 | nos | apm_engg_pryj_e | 45 | |
| 5 | WELDING GAUGE | As per following specification, Digital Welding gauge to measure welding size in angular-vertical-horizontal directions | 2 | nos | apm_engg_pryj_e | 45 | |
| 6 | SCHMIDTS HAMMER | As per following specification- Schmidts hammer digital cum manual type with both type of i.e. digital reading and manual reading simultaneously for assessing the compressive strength of concrete structure by NDT method with measuring range 10 to 70 Nm complete unit with extra impact spring , grinding stone for cleaning tip of the unit duly packed in carrying case along with manual. | 1 | nos | apm_engg_pryj_e | 45 | |
| 7 | WOODEN BLOCKS | Hard wood wooden blocks for using on the track approx size 20in.x8in.x5in. | 400 | nos | apm_engg_pryj_e | 45 | |
| 8 | HOOK BOLTS FOR BRIDGES | HOOK BOLTS FOR BRIDGES | 500 | nos | apm_engg_pryj_e | 45 | |
| 9 | T-BOLT FOR CHANNEL SLEEPER | T-BOLT FOR CHANNEL SLEEPER | 500 | nos | apm_engg_pryj_e | 45 | |
| 10 | TAPERED SPLIT PIN | TAPERED SPLIT PIN | 5,000 | nos | apm_engg_pryj_e | 45 | |
| 11 | SINGLE COIL SPRING WASHER | SINGLE COIL SPRING WASHER | 5,000 | nos | apm_engg_pryj_e | 45 | |
| 12 | INNER AND OUTER CLIP FOR CHANNEL SLEEPER | INNER AND OUTER CLIP FOR CHANNEL SLEEPER | 500 | nos | apm_engg_pryj_e | 45 | |
| 13 | RAIL DISC CUTTER WHEEL STONE | Abrasive rail disc cutter stone wheel size 16inch x 3 mm make Norton or Carborundum or Bosch orEpidoorCutfine or equivalent. | 200 | nos | apm_engg_pryj_e | 45 | |
| 14 | RAIL DRILLING TOOL | Rail drilling tool for drilling 31.5 mm dia holes having helical flute , conical upper shank make Addison or IT or JK orMiranda or equivalent. | 25 | nos | apm_engg_pryj_e | 45 | |
| 15 | RAIL DRILLING TOOL | Rail drilling tool for drilling 26.5 mm dia holes having helical flute , conical upper shank make Addison or IT or JK or Miranda or equivalent. | 50 | nos | apm_engg_pryj_e | 45 | |
| 16 | RAIL DRILLING TOOL | Rail drilling tool for drilling 18 mm dia holes having helical flute , conical upper shank make Addison or IT or JK or Miranda or equivalent. | 25 | nos | apm_engg_pryj_e | 45 | |
| 17 | CHAMFERING KIT | Chamfering Kit for chamfering holes of rails from both sides of the holes. Kit will include torque wrench along with the ratchet, 1 set (2pcs) of 28mm and 1set (2pcs) of 32mm of HSS chamfering tools for chamfering holes simultaneously from inside and outside of rails manually. Complete kit as per Rly specification. | 4 | nos | apm_engg_pryj_e | 45 | |
| 18 | FISH PLATE 1 mtr LONG | Fish plate 1mtr long for 60 kg rail complete pair with nut bolt and washer as per RDSO specification. | 200 | pair | apm_engg_pryj_e | 45 | |
| 19 | HAMMER | As per following specification, Hammer 5kg complete with woodenorbamboo handle. | 50 | nos | apm_engg_pryj_e | 45 | |
| 20 | DIGITAL TOE LOAD MEASURING DEVICE | DIGITAL TOE LOAD MEASURING DEVICE- As per following specification Digital toe load measuring shall be provided with load cell of 2000kg cap. with display resolution of 1 kg. A. Display alpha numeric . B. Operating rail temprature -5C to 70C. C. Measurement accuracy +or-5percent of rated capacity of load cell. D. Fast rturn to zero E. Load cell shall be compressive type.F. Should be able to transfer data from display unit to PC through USB port. G. Complete unit shall be duly packed in a casewith its essential accesories like holding clamp , operating lever etc. Complete equipment as per railway specification. | 2 | nos | apm_engg_pryj_e | 45 | |
| 21 | RAIL SCREW SEJ IN and OUT RT3916 and RT3915 | RAIL SCREW SEJ IN and OUT RT3916 and RT 3915 | 500 | nos | apm_engg_pryj_e | 45 | |
| 22 | BOLT 25 X 100 WITH NUT | BOLT 25 X 100 WITH NUT | 500 | nos | apm_engg_pryj_e | 45 | |
| 23 | RUBBER PADS FOR OWG BR SEJs OF SEJ RT4159 | RUBBER PADS FOR OWG BR SEJs OF SEJ RT 4159 | 500 | nos | apm_engg_pryj_e | 45 | |
| 24 | 10 MM THICK GRSP FOR CHANNEL SLEEPER T5156 | 10 MM THICK GRSP FOR CHANNEL SLEEPER T 5156 | 2,000 | nos | apm_engg_pryj_e | 45 | |
| 25 | 6 MM GRSP FOR GUARD T5163 | 6 MM GRSP FOR GUARD T 5163 | 1,000 | nos | apm_engg_pryj_e | 45 | |
| 26 | Guard rail bolt | Guard rail bolt T5164 | 200 | nos | apm_engg_pryj_e | 45 | |
| 27 | Joggled fish plate | Joggled fish plate | 500 | pair | apm_engg_pryj_e | 45 | |
| 28 | P way Kit | P way Kit | 10 | nos | apm_engg_pryj_e | 45 | |
| 29 | Versine measurement kit | Versine measurement kit | 10 | nos | apm_engg_pryj_e | 45 | |
| 30 | TRACK GAUGE CUM LEVEL | TRACK GAUGE CUM LEVEL | 10 | nos | apm_engg_pryj_e | 45 | |
| 31 | Retro Reflective Tape 45m long | Retro Reflective Tape 45m long | 10 | nos | apm_engg_pryj_e | 45 | |
| 32 | ERC J Type | ERC J Type | 10,000 | nos | apm_engg_pryj_e | 45 | |
| 33 | HTS Bolt grade 10.9S | HTS Bolt grade 10.9S complete with nit and washer. | 500 | nos | apm_engg_pryj_e | 45 | |
| 34 | Grease Graphite | Grease Graphite | 3,000 | kg | apm_engg_pryj_e | 45 |
Categories
106
Corrigendum Updates
1 Update Update
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer