TenderDekho Logo
GEM

Contract Bidding Open For Cobbler Shed in JAMMU, JAMMU & KASHMIR

Bid Publish Date

13-Jul-2026, 3:02 pm

Bid End Date

23-Jul-2026, 3:00 pm

Location

JAMMU , JAMMU & KASHMIR
Generate Docs

Progress

Issue13-Jul-2026, 3:02 pm
AwardPending
Explore all 6 tabs to view complete tender details

Quantity

15

Bid Type

Two Packet Bid

A tender has been published for Directorate Of Enforcement Cobbler Shed (Q3) in JAMMU, JAMMU & KASHMIR. Quantity: 15 by. Submission Deadline: 23-07-2026 15: 00: 00. Check eligibility and apply.

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

No

Bid To RA Enabled

No

Item Category

Cobbler Shed (Q3)

Delivery Details

Max Delivery Days

25

Delivery Locations

1

Delivery Cities

Jammu

Delivery Pincodes

180004

Delivery Locations

ConsigneeAddressCityStatePincodeQuantityDelivery DaysAdditional Requirement
Vinod Kumar180004,ENFORCEMENT DIRECTORATE, Plot No. 5 A/c, Green Belt Park, Gandhi Nagar, Jammu- 180004JammuJammu And Kashmir1800041525-

Authority Records

MINISTRY OF FINANCEREVENUE DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 3

GeM-Bidding-9598655.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Cobbler Shed

Urban Administration And Devlopment

Satna, MADHYA PRADESH

Posted: 26 May 2025
Closed: 25 June 2025
GEM

Cobbler Shed

Indian Army

Posted: 30 May 2025
Closed: 2 June 2025
GEM

Cobbler Shed

Indian Army

Posted: 30 May 2025
Closed: 2 June 2025
GEM

Cobbler Shed

Indian Army

AHMEDNAGAR, MAHARASHTRA

Posted: 15 March 2025
Closed: 17 March 2025
GEM

Cobbler Shed

Indian Army

AMRITSAR, PUNJAB

Posted: 25 February 2025
Closed: 27 February 2025
GEM

Technical Specifications 1 Item

Item #1 Details

View Catalog
Category Specification Requirement
FRAME MATERIAL Vertical main frame angles at all the four corners ( total 4 Nos ) Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 50 mm x 50 mm x 5 mm
FRAME MATERIAL Horizontal frame angles - 4 Nos each on top and bottom ( total 8 Nos ) Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 40 mm x 40 mm x 5 mm
FRAME MATERIAL Support centre frame angles from three sides ( total 3 Nos ) Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 35 mm X 35 mm X 4 mm
FRAME MATERIAL Central gable frame angles ( total 5 Nos ) Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 25 mm X 25 mm X 3 mm
FRAME MATERIAL Door frame angles Made of hot rolled medium and high tensile structural steel confmg. to IS 2062 - 2011 (amended up to date ) Grade E250A in size 35 mm X 35 mm X 4 mm
GENERIC Configuration Assembly shed shall be in 4 main pieces i.e Hinged door and each side as 1 piece – Back and Top
GENERIC Provision of shelf (for display selling goods ) Inside - rested on back panel of the stall., Inside - rested on left panel of the stall., Inside - rested on right panel of the stall., Inside - rested on back panel and left panel of the stall., Inside - rested on back panel and right panel of the stall., Inside - rested on back panel - left panel and right panel of the stall., No provision of shelf
GENERIC Number of shelf for display selling goods ( Inside - rested on back panel of stall ) 2 Nos., 3 Nos., 4 Nos., 5 Nos., No shelf on back panel
GENERIC Number of shelf for display selling goods ( Inside - rested on left panel of the stall) 2 Nos., 3 Nos., 4 Nos., 5 Nos., No shelf on left panel
GENERIC Number of shelf for display selling goods (Inside - rested on right panel of the stall) 2 - Nos., 3 - Nos., 4 - Nos., 5 Nos., No shelf on right panel
GENERIC Provision for door locking By fixing a door Aldrop
GENERIC Scope of supply Supply and Installation
GENERIC Transportations / Freight charges Offer Prices are on Free Delivery at Consignee site basis
GENERIC Approval of Advance sample before Bulk Supply After award of contract, Seller shall have to get proto type Advance sample approved from Buyer before manufacturing / starting Bulk supplies. Buyer shall approve / provide list of modifications required within 10 days of offer of advance sample. If there is delay in approval of advance sample from Buyer side, the delivery period shall be regularized for the period of delay in sample approval, No advance sample
PANEL & OTHER MATERIALS Sides panel material Made of corrugated galvanized steel sheets confmg. to IS 277 - 2018 ( amended up to date ) Grade 275 designation GC in 20 SWG (0.914 mm ± 0.1 mm )
PANEL & OTHER MATERIALS Back panel material Made of corrugated galvanized steel sheets confmg. to IS 277 - 2018 ( amended up to date ) Grade 275 designation GC in 20 SWG (0.914 mm ± 0.1 mm )
PANEL & OTHER MATERIALS Door panel material Made of corrugated galvanized steel sheets confmg. to IS 277 - 2018 ( amended up to date ) Grade 275 designation GC in 20 SWG (0.914 mm ± 0.1 mm )
PANEL & OTHER MATERIALS Bottom Panel material Made of MS plate having 3 mm thickness with galvanizing as per IS 277:2018 (amended upto date ) with 600 grade of coating.
PANEL & OTHER MATERIALS Top panel material Made of galvanized steel sheet confmg. to IS 277 - 2018 amended upto date with 275 Grade of coating in 20 SWG (0.914 mm ± 0.1 mm )
PANEL & OTHER MATERIALS Shelf material MS Epoxy Polyester Powder coated with a dry film thickness of minimum 60 to 86 microns (Tested as per IS 101: Part-3: Sec-2 - 1989
PANEL & OTHER MATERIALS Material for the bolt / rivet / weld G P Sheets with angles from inside To be use Hot dip galvanized strip of size 18 x 3.15 mm thick confmg. to IS 1730:1989 (amended upto date) and strip galvanized as per IS 277:2018 grade 600
PANEL & OTHER MATERIALS Fasteners to be used to join all panels As per IS 1367 (Part 1) : 2002 Gr 8.8 of size M8 and M10
PANEL & OTHER MATERIALS Door Aldrop material MS (Mild Steel), Aluminium
DIMENSION Width of Cobbler shed 1520 mm
DIMENSION Depth of cobbler shed 1220 mm
DIMENSION Wall height at eaves 1830 mm
DIMENSION Wall height at central gable 2150 mm
DIMENSION Central gable height from side walls 320 mm
DIMENSION Central gable height from ground 2300 mm
DIMENSION Width of door panels 760 mm
DIMENSION Size of shelf - rest on back panel of stall 300 mm x 1520 mm x 2 mm thick, N.A
DIMENSION Size of shelf - rest on Left panel of stall (to be declared from buyer - Write NA if not applicable) 300 mm x 1520 mm x 2 mm thick, N.A.
DIMENSION Size of shelf - rest on Right panel of stall(to be declared from buyer - Write NA if not applicable) 300 mm x 1520 mm x 2 mm thick, N.A.
DIMENSION Size of floor base plate 1220 mm x 1520 mm x 3 mm
DIMENSION Size of Galvanised base plate - to be welded at bottom of angles 4 nos. of size 150 mm Dia x 5 mm thickness
DIMENSION Ground Clearance (Leg height) 150 mm
DIMENSION Pitch of Corrugation (Flute width in corrugated sheet in mm) ± 5 mm 75, 50
DIMENSION Depth of corrugation ( Flute depth in Corrugated Sheet in mm) ± 3 mm 15
DIMENSION Size of Door Aldrop 250 mm x 12 mm duly welded and riveted on strengthening plate of 3 mm thickness from both the side
COLOR AND FINISH Finish of angles structure Epoxy polyester powder coated involving 8 steps treatment consisting of Hot water rinse – Knock of degreasing – Greasing cold water rinse – Phosphatic cold water rinse – Passivation and dry off over treatment final finish as per approved color / shade with a dry film thickness of minimum 60 to 86 microns confmg. to IS 101 : Part – 3 : Sec – 2 – 1989 (amended upto date)
COLOR AND FINISH Sides panel – door panels and back panels shall be painted Yes, No
COLOR AND FINISH Paints Confmg. to IS 2933 – 1975 amended upto date (Exterior Grade for metals), N.A
COLOR AND FINISH Finish of Paints Smooth and uniform coating of minimum 25 micron as per IS 101: Part-3: Sec-2 – 1989 (amended upto date), N.A
WARRANTY Warranty period in number of years 1, 2, 3, 4, 5 Or higher

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Similar Tenders

5 found

Procurement Opportunity: Extension of Shed

SECURITY PRINTING AND MINTING CORPORATION OF INDIA-SPMCIL

EMD: ₹15,000
⏰ Deadline: 4 weeks left
🛒 Type: Works
View EPROCURE

Construction of Shed

North Eastern Hill University (nehu) Shillong

📍 WEST GARO HILLS, MEGHALAYA

⏰ Deadline: 2 weeks left
🛒 Type: Goods
View GEM

Open Warehouse Shed Development 4000SQFT[ Approx. ] - Pre-engineered modular (PEM) Open Shed

Balmer Lawrie And Company Limited

📍 KOLKATA, WEST BENGAL

EMD: ₹15,000
⏰ Deadline: 2 weeks left
🛒 Type: Goods
View GEM

Government Tender Published for Civil Work in KALAHANDI, ODISHA

Directorate of Agriculture and Food Production

📍 KALAHANDI, ODISHA

EMD: ₹5,003
Est: ₹5.0 L
⏰ Deadline: 2 weeks left
🛒 Type: Works
View EPROCURE
Urgent

Open Tender for Const. of Stage Shed at Mela Ground Surjan W.No. 1 Pyt Surjan Block Duggan in KATHUA, JAMMU AND KASHMIR

Rural Development and Panchayati Raj

📍 KATHUA, JAMMU AND KASHMIR

EMD: ₹9,960
Est: ₹5.0 L
⏰ Deadline: 3 days left
🛒 Type: Works
View EPROCURE

Explore More Opportunities

Quick Access
All Tenders Browse all opportunities
JAMMU City tenders

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

 View All