Closed GEM

Government Tender Published for LED Luminaire For Road And Street Lights Conforming To IS 10322 (Part 5/Section 3) (V3) (Under BIS in GAYA, BIHAR

Bid Publish Date

08-Aug-2026, 11:43 am

Bid End Date

21-Aug-2026, 1:00 pm

EMD

₹20,000

Location

GAYA , BIHAR

WhatsApp Generate Docs

Progress

Issue08-Aug-2026, 11:43 am

Reverse Auction28-Aug-2026, 12:00 pm

AwardPending

A tender has been published for Indian Army LED Luminaire For Road And Street Lights Conforming To IS 10322 (Part 5/Section 3) (V3) (Under BIS Scheme - II) (Q2), Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3), Self Ballasted LED Lamps (LED Bulb) (V3) Conforming to IS 16102 (Part 2) (Under BIS Scheme - II) (Q2), LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II) (Q2), LED Batten Light (LED Tube Light) (V2) (Q2), Towel Rail (Q3), LED Luminaire For Floodlight Conforming To IS 10322 (Part 5/Section 5) (V3) (Under BIS Scheme - II) (Q2), PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3), Bathroom or Toilet Mirror (V3) (Q4), Towel Ring (Q3), Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3), LED Garden Light (V2) (Q2) in GAYA, BIHAR. Quantity: 822 by. Submission Deadline: 21-08-2026 13: 00: 00. Check eligibility and apply.

Authority & Contact

Organization

Indian Army

Department

Department of Military Affairs

Office Name

Not disclosed yet

Ministry

Ministry of Defence

Grievance Contact

[email protected]

Reverse Auction Schedule

Completed

Start

28-Aug-2026, 12:00 pm

End

31-Aug-2026, 4:00 pm

Duration: 76 hours

Reverse Auction Document

✅ RA concluded. Check financial results for final rankings.

Tender Data

Bid Details

Quantity

822

Preference & Exemptions

EMD Required

Yes

MII Purchase Preference

Yes

MII Preference Band

L1+20%

MSE Purchase Preference

Yes

MSE Preference Band

L1+15%

MSE Exemption/Relaxation

Startup Exemption/Relaxation

Bid Splitting Applied

Requirements

Min. Avg. Annual Turnover

OEM Avg. Turnover

Past Performance

80 %

Experience Required

3 Year (s)

Arbitration Clause

Mediation Clause

Additional Tender Data

Commercial Details

Tender Category

Goods

Bid To RA

Bid To RA Enabled

Yes

Item Category

LED Luminaire For Road And Street Lights Conforming To IS 10322 (Part 5/Section 3) (V3) (Under BIS Scheme - II) (Q2) , Copper alloy Taps/Stop Valves (V2) Conforming to IS 8931 (Q3) , Self Ballasted LED Lamps (LED Bulb) (V3) Conforming to IS 16102 (Part 2) (Under BIS Scheme - II) (Q2) , LED Luminaire (Recessed Luminaire) (Ceiling Light) Conforming To IS 10322 (Part 5/Section 2) (V4) (Under BIS Scheme - II) (Q2) , LED Batten Light (LED Tube Light) (V2) (Q2) , Towel Rail (Q3) , LED Luminaire For Floodlight Conforming To IS 10322 (Part 5/Section 5) (V3) (Under BIS Scheme - II) (Q2) , PLASTIC BIB TAPS, PILLAR TAPS, ANGLE VALVES & STOP VALVES FOR HOT & COLD WATER SERVICES Conforming to IS 9763 (Q3) , Bathroom or Toilet Mirror (V3) (Q4) , Towel Ring (Q3) , Rotational Moulded Polyethylene Water Storage Tanks (V3) Conforming to IS 12701 (Q3) , LED Garden Light (V2) (Q2)

Advisory Bank

State Bank of India

Delivery Details

Max Delivery Days

Delivery Locations

Delivery Cities

Gaya

Delivery Locations

Consignee	Address	City	State	Pincode	Quantity	Delivery Days	Additional Requirement
-	Gaya	Gaya	-	-	24	45	-

Authority Records

MINISTRY OF DEFENCEMILITARY AFFAIRS DEPARTMENT

BID & GeM Expert Consultancy

End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.

Bid Preparation GeM Registration Document Filing

Free consultation · 24h response

Documents 16

GeM-Bidding-9647967.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

CATALOG-Specification-3

CATALOG Specification

CATALOG-Specification-4

CATALOG Specification

CATALOG-Specification-5

CATALOG Specification

CATALOG-Specification-6

CATALOG Specification

CATALOG-Specification-7

CATALOG Specification

CATALOG-Specification-8

CATALOG Specification

CATALOG-Specification-9

CATALOG Specification

CATALOG-Specification-10

CATALOG Specification

CATALOG-Specification-11

CATALOG Specification

CATALOG-Specification-12

CATALOG Specification

CATALOG-Specification-13

CATALOG Specification

CATALOG-Specification-14

CATALOG Specification

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Required Documents

Experience Criteria

Past Performance

Bidder Turnover

Certificate (Requested in ATC)

OEM Authorization Certificate

OEM Annual Turnover

Additional Doc 1 (Requested in ATC)

Additional Doc 2 (Requested in ATC)

Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria

the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer

Technical Specifications 14 Items

Item #1 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Rated Wattage (in Watts)	9.0
Performance Parameters	BEE Star Rating	1 Star
Performance Parameters	LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K-6500 K)]	6500 K
Performance Parameters	Type of LED Lamp Cap	B22d

Item #2 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	Rated Wattage (in Watts)	20.0
Performance Parameters	Length of LED Batten Light	4.0
Performance Parameters	Rated Luminous Efficacy (in lumen/watt)	100, 110 Or higher
Performance Parameters	LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K-6500 K)]	6500 K
Warranty	Minimum Standard Warranty	1.0

Item #3 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	System Wattage (in Watt)	200
Performance Parameters	Minimum LED Luminaire System Efficacy (in lumen/watt)	100
Performance Parameters	LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K-6500 K)]	5700 K
Construction	Ingress Protection (Entire Housing)	IP66 Or higher
Construction	Minimum Internal Surge Protection (in kV)	4, 5 Or higher
Warranty	Minimum Standard Warranty	1.0

Item #4 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	System Wattage (in Watt)	150
Performance Parameters	Minimum LED Luminaire System Efficacy (in lumen/watt)	100
Performance Parameters	LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K-6500 K)]	5700 K
Construction	Ingress Protection (Entire Housing)	IP66 Or higher
Construction	Minimum Internal Surge Protection (in kV)	4, 5 Or higher
Warranty	Minimum Standard Warranty	1.0

Item #5 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Cast brass
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Forged brass
Material	Material of circlip, wire locks	Stainless steel
Material	Material of 'O' ring , gasket, and seat washer	Synthetic butadiene rubber (SBR)
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	No
Warranty	Warranty (in months)	12

Item #6 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 3 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #7 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 1 Bib tap
Type	Dimension	As per table 4 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Cast brass
Material	Material of inlet tubes	Brass tubes
Material	Material of flanges	Brass rods, Stainless steel sheet
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Extruded brass rods
Material	Material of circlip, wire locks	Phosphor bronze sheet
Material	Material of 'O' ring , gasket, and seat washer	Synthetic rubber
Material	Material of Knob and knob components	Zinc base alloys
Generic	Aerating device fitted with tap	Yes
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	12

Item #8 Details

View Catalog

Category	Specification	Requirement
Specification	Governing Specification	Conforming to IS 8931
Type	Item	Type 2 wall mounted combination tap assembly
Type	Dimension	As per table 6 of the governing specification
Type	Nominal Size of bore of pipe to which taps and valves are fitted(in mm)	15
Material	Material of body, body components, nozzle , bonnet and back nuts	Forged brass
Material	Material of inlet tubes	Copper tubes
Material	Material of flanges	Brass rods
Material	Material of diverter and diverter components	NA
Material	Material of spindle, glands, washer plate, nuts, screw and pin	Rolled brass rods
Material	Material of circlip, wire locks	Phosphor bronze wire
Material	Material of 'O' ring , gasket, and seat washer	Neoprene rubber
Material	Material of Knob and knob components	Forged brass
Generic	Aerating device fitted with tap	No
Generic	Flow straightening device fitted with tap	Yes
Warranty	Warranty (in months)	24

Item #9 Details

View Catalog

Category	Specification	Requirement
Generic	Ring Shape	Circular
Material & Dimensions	Ring Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Inner Diameter of Ring (in mm) (Tolerance : ± 10 mm)	140 mm
Material & Dimensions	Ring Rod Thickness (in mm) (Tolerance : ± 10 mm)	8 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	50 mm
Material & Dimensions	Mounting Plate Size (in mm)	40 mm
Design & Configuration	Edge Design	Rounded Edge
Design & Configuration	Ring Movement Type	Fixed Ring
Surface Finish/ Color	Surface Finish/ Color	Matt Finish
Load & Performance	Recommended Load Capacity (in kg)	Up to 2 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Plastic

Item #10 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 202)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 202)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	300 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Edge Design	Rounded Edge
Design & Configuration	Bar Shape of Rail	Round
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #11 Details

View Catalog

Category	Specification	Requirement
Generic Requirement	Type (Based on Shape of Tank)	Cylindrical Vertical Tank with Lid
Generic Requirement	Layer of Tank	Single Layered
Dimensions	Minimum Net Capacity (In Liter)	1000 Liter
Dimensions	Dimesnions of Tank	Dimensions of Cylinerical Vertical Tank as per Table 1 clause 5.1

Item #12 Details

View Catalog

Category	Specification	Requirement
Material & Dimensions	Rail Material	Stainless Steel (SS 304)
Material & Dimensions	Mounting Bracket Material	Stainless Steel (SS 304)
Material & Dimensions	Towel Rail Length (in mm) (Tolerance : ± 10 mm)	300 mm
Material & Dimensions	Rail Diameter / Thickness (in mm) (Tolerance : ± 10 mm)	16 mm
Material & Dimensions	Projection from Wall (in mm) (Tolerance : ± 10 mm)	60 mm
Design & Configuration	Towel Rail Type	Single Bar
Design & Configuration	Edge Design	Seamless Edge
Design & Configuration	Bar Shape of Rail	Flat
Design & Configuration	Mounting Plate Shape	Rectangular
Surface Finish/ Color	Surface Finish/ Color	Chrome Plated
Load & Performance	Recommended Load Capacity (in kg)	Up to 3 kg
Fixing & Accessories	Fixing Hardware Included	No
Fixing & Accessories	Fasteners Material	Stainless Steel

Item #13 Details

View Catalog

Category	Specification	Requirement
Performance Parameters	System Wattage (in Watt)	70
Performance Parameters	LED Luminaire System Efficacy (in lumen/watt)	100, 120, 140 Or higher
Performance Parameters	LED Colour Temperature [Hint: Warm White (2700K-3000K), Bright White (3500 K-4000 K), Cool White/Daylight (5000 K-6500 K)]	5700 K
Construction	Ingress Protection (Entire Housing)	IP66 Or higher
Construction	Minimum Internal Surge Protection (in kV)	4, 5 Or higher
Warranty	Minimum Standard Warranty	1.0

Item #14 Details

View Catalog

Category	Specification	Requirement
GENERIC	Type of Garden Light	Bollard type with Pole and LED lantern/luminaire, Architectural design with pole and LED lantern/luminaire, LED post top lantern/luminaire with pole
GENERIC	Material of Garden Lighting pole including lighting system (lantern/luminaire) (Note: Wherever GI, MS, CI materials used, materials shall be ISI Marked)	Aluminium casting, Galvanised Iron, Mild steel, Cast iron, LED post top with out pole. Hence not applicable
GENERIC	Pole height inlcluding lantern/luminaire (in m)	0.5, 1, 1.5, 3, 4, 5, 6, 7, 8, without pole
GENERIC	No.of lantern/luminaire with each pole (in m)	1, 2, 3, 4, 5, LED post top with out pole. Hence not applicable
LIGHT SOURCE	Type of light source - BEE star rating of LED Bulb	LED Bulb - 4 Star
LIGHT SOURCE	LED Rating in each lantern/luminaire/lighting system (in Watts)	20.0
LIGHT SOURCE	LED Lamp/System efficacy in each lantern / luminaire (in lumen / watt)	≥ 120 and < 135
LIGHT SOURCE	In case of LED bulb - Cap designation of each lamp and holder in each lantern / luminaire	B22d
LIGHT SOURCE	Colour temperature of each light source	6000 +/-500K
PROTECTION	Automatic Lower / Higher Cut off voltage	Yes. Lower cut off 120 V, Higher cut off 300 V
PROTECTION	Protection against surges and transients - External	> / = 10 KV Or higher
THERMAL MANAGEMENT	Minimum Operating Temperature (in deg. C)	-10
THERMAL MANAGEMENT	Maximum Operating Temperature (in deg. C)	50
LANTERN/LUMINAIRE - CONSTRUCTION	Impact resistance on diffuser material (in IK)	7
LANTERN/LUMINAIRE - CONSTRUCTION	Protection of the entire housing (in IP) Protection of the entire housing as per IS:10322 (Part 1):1982 latest	65
LANTERN/LUMINAIRE - CONSTRUCTION	Length of ISI marked three core connecting wire (Provided along with each lantern/luminiare) - (in m)	1
CERTIFICATIONS	Warranty for free replacement of lighting systems including lightsource (in years)	1
ADVANCE SAMPLE	Agreed to provide Advance Sample(s) for buyer's approval before commencement of supply. ( hint: Applicable in case of orders placed against bid and not applicable in case of Direct Buying )	Yes

Explore More Opportunities

Quick Access

All Tenders Browse all opportunities

BIHAR State tenders

GAYA , BIHAR City tenders

Categories 4 available

TenderDekho

Offerings

Tender Alerts

5 types · 54 portals · AI-personalized

Competitor Intel

4 L+ companies · H2H analysis

GeM Services

Registration · Listing · Submission

View All

Browse Tenders

Categories

States

Cities

Authorities

Government Tender Published for LED Luminaire For Road And Street Lights Conforming To IS 10322 (Part 5/Section 3) (V3) (Under BIS in GAYA, BIHAR

Authority & Contact

Reverse Auction Schedule

Tender Data

Bid Details

Preference & Exemptions

Requirements

Additional Tender Data

Commercial Details

Delivery Details

Delivery Locations

Authority Records

BID & GeM Expert Consultancy

Documents 16

GeM-Bidding-9647967.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

GEM General Terms and Conditions Document

Categories 30

Required Documents

Technical Specifications 14 Items

Item #1 Details

Item #2 Details

Item #3 Details

Item #4 Details

Item #5 Details

Item #6 Details

Item #7 Details

Item #8 Details

Item #9 Details

Item #10 Details

Item #11 Details

Item #12 Details

Item #13 Details

Item #14 Details

Explore More Opportunities

Documents

Unlock All Documents

GeM-Bidding-9647967.pdf

CATALOG-Specification-1

CATALOG-Specification-2

CATALOG-Specification-3

CATALOG-Specification-4

CATALOG-Specification-5

CATALOG-Specification-6

CATALOG-Specification-7

CATALOG-Specification-8

CATALOG-Specification-9

CATALOG-Specification-10

CATALOG-Specification-11

CATALOG-Specification-12

CATALOG-Specification-13

CATALOG-Specification-14

GEM General Terms and Conditions Document