Government Tender Published for Almirah large steel with shelves,Almirah small steel with shelves,Almirah small steel HH HS,Board N in SOUTH ANDAMAN, ANDAMAN & NICOBAR
Bid Publish Date
18-Jul-2026, 10:33 am
Bid End Date
29-Jul-2026, 11:00 am
EMD
₹3,14,000
Value
₹1,04,50,685
Location
Progress
Quantity
1250
Category
Almirah small steel HH HS
Bid Type
Two Packet Bid
Categories
74
Public procurement opportunity for Indian Army Almirah large steel with shelves, Almirah small steel with shelves, Almirah small steel HH HS, Board Notice pinup fell covered 6 feet x 4 feet, Book Case steel, Cabinet filling 4 drawer, Chair CB steel with arms, Chair CB steel without arms, Chair executive revolving, Chair steel CBA tubular padded with arms, Chair easy cushioned, Charpoy with hard top, Hat stand with mirror small, Locker steel, Looking mirror 5 feet x 2 feet with Alumn frame, Peg table, Podium stand of size H 45 inch x L 30 inch x D 24 inch, Rack adjustable 6 tier, Rack pigeon hole steel, Rack side 4 space steel, Sofa set 5 seater with cushion, Stool steel 305 x 305 x 510 mm, Study table for library 8 feet x 4 feet x 2 point 5 feet, Table centre, Table conference for 26 persons, Table office Clk steel, Table Office Officer steel, Work bench workshop 1800mmx900mmx760mm, Peg set of three, Peg set of Six, Woolen carpet 4m x 3. 5m, Mattress 78 inch x 36 inch x 4 inch, Pillow, Table Bed Side in SOUTH ANDAMAN, ANDAMAN & NICOBAR. Quantity: 1250 issued by. Submission Deadline: 29-07-2026 11: 00: 00. View full details and respond.
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Almirah large steel with shelves , Almirah small steel with shelves , Almirah small steel HH HS , Board Notice pinup fell covered 6 feet x 4 feet , Book Case steel , Cabinet filling 4 drawer , Chair CB steel with arms , Chair CB steel without arms , Chair executive revolving , Chair steel CBA tubular padded with arms , Chair easy cushioned , Charpoy with hard top , Hat stand with mirror small , Locker steel , Looking mirror 5 feet x 2 feet with Alumn frame , Peg table , Podium stand of size H 45 inch x L 30 inch x D 24 inch , Rack adjustable 6 tier , Rack pigeon hole steel , Rack side 4 space steel , Sofa set 5 seater with cushion , Stool steel 305 x 305 x 510 mm , Study table for library 8 feet x 4 feet x 2 point 5 feet , Table centre , Table conference for 26 persons , Table office Clk steel , Table Office Officer steel , Work bench workshop 1800mmx900mmx760mm , Peg set of three , Peg set of Six , Woolen carpet 4m x 3.5m , Mattress 78 inch x 36 inch x 4 inch , Pillow , Table Bed Side
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
9
Delivery Details
Max Delivery Days
100
Delivery Locations
1
Delivery Cities
South Andaman
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | South Andaman | South Andaman | - | - | 75 | 100 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9447953.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
34 Items Sign in to view GEM price trends Sign in for GEM prices
Almirah large steel with shelves
1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Almirah small steel with shelves
1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Almirah small steel HH HS
1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Board Notice pinup fell covered 6 feet x 4 feet
Board Notice pinup fell covered 6 feet x 4 feet
Book Case steel
Over all size shall be 840mm long 310mm wide and 1675mm high. Back comma sides comma bottom comma top and shelves shall be 1mm thick MS sheet. The book case shall be provided with for compartments of equal size. The shutters of each compartments shall open towards top and slide into the depth of book case. Two CP handles of 100mm long shall be provided to each compartment. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Cabinet filling 4 drawer
Cabinet filling 4 drawer
Chair CB steel with arms
Chair CB steel with arms
Chair CB steel without arms
Chair CB steel without arms
Chair executive revolving
Chair executive revolving
Chair steel CBA tubular padded with arms
Chair steel CBA tubular padded with arms. As per trade pattern
Chair easy cushioned
All wood shall seasoned first class teak wood free from knots and defects hard nylon buffers shall be fixed at the bottom of legs with brass screws Seat and Back shall be made by 12mm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by GE. All exposed wooden surface shall be finished with french polish in light walnut shade or as approved by GE. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Charpoy with hard top
Long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle MS pipe.Stifners shall be 25 mm 16 gauge square MS pipe. Legs shall be 32 mm 16 gauge square MS pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood BWR type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut & washers. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Hat stand with mirror small
Frame shall be 18 mm thick exterior grade MDF board one side laminated shade as approved by GE duly fixed with 4 mm thick teak wood beading in matching shade with synthetic adhesive Fevicol SH. Bevelled edge Mirror shall be fixed by using teakwood beading all around with decorative finish. Brass hooks as per drawing specification shall be fixed by Brass oval trim self tapping screw. Rest all as specified or shown in drawing and directed by Engineer in Charge.
Locker steel
1mm thick MS sheet shall be used to manufacture locker except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Locker shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Locker shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Looking mirror 5 feet x 2 feet with Alumn frame
Over all size of the mirror shall be 5 feet high and 2 feet width. 5mm thich mirror shall be supported by 6mm thich BWR grade plywood. Mirror and plywood shall be covered with Alumn frame with key hole hook for hanging arrangement.
Peg table
All wood shall seasoned first class teak wood free from knots and defects. Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. H Type leg stiffeners shall be provided for better support. Top shall be 18 mm thick exterior grade MDF board one side laminated in light Wallnut shade or as approved by GE comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive Fevicol SH. All wood surfaces shall be french polished with high glossy finish. Rest all as specified or shown in drawing and directed by Enginer in Charge.
Podium stand of size H 45 inch x L 30 inch x D 24 inch
Podium stand of size H 45 inch x L 30 inch x D 24 inch
Rack adjustable 6 tier
Over all size shall be 915mm long comma 610mm wide and 1905mm high. Frame shall be 40x40x5mm slotted angle Iron fixed with nut bolts irrespective of shown in drawing. Shelf shall be 1mm thick CRCA sheet with bottom support of 15x15x3mm angle Iron. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as per drawing and directed by Engineer in charge or GE.
Rack pigeon hole steel
Over all size shall be 915mm long comma 610mm wide and 1905mm high. Frame shall be 40x40x5mm angle Iron fixed with nut bolts irrespective of shown in drawing. Top comma bottom comma sides comma back and Shelves shall be 1mm thick CRCA MS sheet. The length of 915mm shall be devided into three equal compartments horizontally and 1805mm height shall be devided into six compartments equally to give overall eighteen compartments. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as per drawing and directed by Engineer in charge or GE.
Rack side 4 space steel
Over all size shall be 1120mm long comma 355mm wide and 810mm high. Frame shall be 40x40x5mm angle Iron fixed with nut bolts irrespective of shown in drawing. Mild steel shelves made to shape shall be welded to angle iron legs at 100mm from bottom and 50mm from top. Top shelf shall have four compartments equally spaced with 50mm high partitions and bach covering with MS sheet of 1mm thick. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as per drawing and directed by Engineer in charge or GE.
Sofa set 5 seater with cushion
The set consist of one long piece of three seater and two small pieces of single seater. All timber work shall be first class seasoned teak wood free from knots oblique defects. Cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth composition of 65 percentage polyester and 35 percentage cotton or as approved by GE and make of cushion shall be kurlon oblique sleepwell. All the wooden joints shall be fixed with bamboo pins and nails shall not be used. All exposed wooden surface shall be finished with Deco polish in light walnut shade or as approved by GE. Rest all as specified oblique shown in drawing and directed by Engineer in Charge.
Stool steel 305 x 305 x 510 mm
Top shall be 1mm thick MS sheet. Legs shall be 40x40x5mm angle Iron irrespective of shown in drawing. 40 x 40 x 5mm triangular piece shall be welded to bottom of legs. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified oblique shown in drawing and directed by Enginer in Charge.
Study table for library 8 feet x 4 feet x 2 point 5 feet
Study table for library 8 feet x 4 feet x 2 point 5 feet. As per trade pattern
Table centre
All wood shall be kiln seasoned first class teak wood free from knots and defects. Hard Rubber oblique Nylon buffers shall be fixed at the bottom of legs with brass screws. Top shall be 18 mm thick exterior grade pre laminated MDF board one side laminated in light Wallnut shade or as approved by GE, comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive Fevicol SH. All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish. Rest all as per drawing.
Table conference for 26 persons
Table conference for 26 persons. As per trade pattern
Table office Clk steel
Top shall be 18 mm thick exterior grade pre laminated MDF board one side laminated in light Wallnut shade or as approved by GE comma duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive Fevicol SH. with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified oblique shown in drawing and directed by Enginer in Charge.
Table Office Officer steel
Top shall be 18 mm thick exterior grade MDF board one side laminated in light Wallnut shade or as approved by BSO oblique GE comma duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive Fevicol SH. with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified oblique shown in drawing and directed by Enginer in Charge.
Work bench workshop 1800mmx900mmx760mm
Over all size shall be 1800mm long comma 900mm wide and 760mm high. Four legs shall be of 32mm square MS tube of wall thickness 1 comma 6mm. Size of steel frame shall be 1700mm x 800mm x 720mm. Leg shall be 720mm high. Top of table shall be provided with 40mm thick wood planks of width not less than 150mm joined together to make flush joints. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified oblique shown in drawing and directed by Enginer in Charge.
Peg set of three
All as specified oblique shown in drawing and directed by Enginer in Charge.
Peg set of Six
All as specified oblique shown in drawing and directed by Enginer in Charge.
Woolen carpet 4m x 3.5m
Woolen carpet 4m x 3 point 5m
Mattress 78 inch x 36 inch x 4 inch
Mattress 78 inch x 36 inch x 4 inch. As per trade pattern
Pillow
Pillow
Table Bed Side
Top comma sides and front shall be 18mm thick exterior grade MDF board one side pre laminated comma as approved by GE comma duly covered with 4mm thick half round teak wood beading in matching shade with synthetic adhesive Fevicol SH. Sides and back of the drawers shall be made out of 12mm thick BWR plywood whereas for bottom of the drawer 8mm thick plywood shall be used. Front of the drawers shall be made out of 18mm thick exterior grade prelaminated MDF board. Each drawer shall be supported with telescopic channel for smooth functioning. One 4 inch long chromium plated handle of approved quality should also be provided in each drawer. All steel surface shall be finished with Black colour as approved by GE two coats of synthetic enamel paint upto obtaining glossy finishng over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. Rest all as specified oblique shown in drawing and directed by Enginer in Charge.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Almirah large steel with shelves | 1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 75 | nos | ageemnorth@1 | 100 | |
| 2 | Almirah small steel with shelves | 1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 65 | nos | ageemnorth@1 | 100 | |
| 3 | Almirah small steel HH HS | 1mm thick MS sheet shall be used to manufacture Almirah except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Almirah shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Almirah shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 80 | nos | ageemnorth@1 | 100 | |
| 4 | Board Notice pinup fell covered 6 feet x 4 feet | Board Notice pinup fell covered 6 feet x 4 feet | 54 | nos | ageemnorth@1 | 100 | |
| 5 | Book Case steel | Over all size shall be 840mm long 310mm wide and 1675mm high. Back comma sides comma bottom comma top and shelves shall be 1mm thick MS sheet. The book case shall be provided with for compartments of equal size. The shutters of each compartments shall open towards top and slide into the depth of book case. Two CP handles of 100mm long shall be provided to each compartment. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 6 | nos | ageemnorth@1 | 100 | |
| 6 | Cabinet filling 4 drawer | Cabinet filling 4 drawer | 6 | nos | ageemnorth@1 | 100 | |
| 7 | Chair CB steel with arms | Chair CB steel with arms | 217 | nos | ageemnorth@1 | 100 | |
| 8 | Chair CB steel without arms | Chair CB steel without arms | 27 | nos | ageemnorth@1 | 100 | |
| 9 | Chair executive revolving | Chair executive revolving | 5 | nos | ageemnorth@1 | 100 | |
| 10 | Chair steel CBA tubular padded with arms | Chair steel CBA tubular padded with arms. As per trade pattern | 99 | nos | ageemnorth@1 | 100 | |
| 11 | Chair easy cushioned | All wood shall seasoned first class teak wood free from knots and defects hard nylon buffers shall be fixed at the bottom of legs with brass screws Seat and Back shall be made by 12mm thick BWR grade plywood over which 40 density foam 75mm thick shall be provided duly covered with best quality tapestry cloth as approved by GE. All exposed wooden surface shall be finished with french polish in light walnut shade or as approved by GE. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 4 | nos | ageemnorth@1 | 100 | |
| 12 | Charpoy with hard top | Long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle MS pipe.Stifners shall be 25 mm 16 gauge square MS pipe. Legs shall be 32 mm 16 gauge square MS pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood BWR type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut & washers. All steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 4 | nos | ageemnorth@1 | 100 | |
| 13 | Hat stand with mirror small | Frame shall be 18 mm thick exterior grade MDF board one side laminated shade as approved by GE duly fixed with 4 mm thick teak wood beading in matching shade with synthetic adhesive Fevicol SH. Bevelled edge Mirror shall be fixed by using teakwood beading all around with decorative finish. Brass hooks as per drawing specification shall be fixed by Brass oval trim self tapping screw. Rest all as specified or shown in drawing and directed by Engineer in Charge. | 20 | nos | ageemnorth@1 | 100 | |
| 14 | Locker steel | 1mm thick MS sheet shall be used to manufacture locker except legs. Two Legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick MS sheet. Cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma Locker shall be fitted with ISI marked 75mm 6 lever lock with three way locking system. Front shutters shall have two leaves of equal size. Locker shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 60 | nos | ageemnorth@1 | 100 | |
| 15 | Looking mirror 5 feet x 2 feet with Alumn frame | Over all size of the mirror shall be 5 feet high and 2 feet width. 5mm thich mirror shall be supported by 6mm thich BWR grade plywood. Mirror and plywood shall be covered with Alumn frame with key hole hook for hanging arrangement. | 22 | nos | ageemnorth@1 | 100 | |
| 16 | Peg table | All wood shall seasoned first class teak wood free from knots and defects. Hard Nylon buffers shall be fixed at the bottom of legs with brass screws. H Type leg stiffeners shall be provided for better support. Top shall be 18 mm thick exterior grade MDF board one side laminated in light Wallnut shade or as approved by GE comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive Fevicol SH. All wood surfaces shall be french polished with high glossy finish. Rest all as specified or shown in drawing and directed by Enginer in Charge. | 2 | nos | ageemnorth@1 | 100 | |
| 17 | Podium stand of size H 45 inch x L 30 inch x D 24 inch | Podium stand of size H 45 inch x L 30 inch x D 24 inch | 1 | nos | ageemnorth@1 | 100 | |
| 18 | Rack adjustable 6 tier | Over all size shall be 915mm long comma 610mm wide and 1905mm high. Frame shall be 40x40x5mm slotted angle Iron fixed with nut bolts irrespective of shown in drawing. Shelf shall be 1mm thick CRCA sheet with bottom support of 15x15x3mm angle Iron. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as per drawing and directed by Engineer in charge or GE. | 18 | nos | ageemnorth@1 | 100 | |
| 19 | Rack pigeon hole steel | Over all size shall be 915mm long comma 610mm wide and 1905mm high. Frame shall be 40x40x5mm angle Iron fixed with nut bolts irrespective of shown in drawing. Top comma bottom comma sides comma back and Shelves shall be 1mm thick CRCA MS sheet. The length of 915mm shall be devided into three equal compartments horizontally and 1805mm height shall be devided into six compartments equally to give overall eighteen compartments. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as per drawing and directed by Engineer in charge or GE. | 1 | nos | ageemnorth@1 | 100 | |
| 20 | Rack side 4 space steel | Over all size shall be 1120mm long comma 355mm wide and 810mm high. Frame shall be 40x40x5mm angle Iron fixed with nut bolts irrespective of shown in drawing. Mild steel shelves made to shape shall be welded to angle iron legs at 100mm from bottom and 50mm from top. Top shelf shall have four compartments equally spaced with 50mm high partitions and bach covering with MS sheet of 1mm thick. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as per drawing and directed by Engineer in charge or GE. | 117 | nos | ageemnorth@1 | 100 | |
| 21 | Sofa set 5 seater with cushion | The set consist of one long piece of three seater and two small pieces of single seater. All timber work shall be first class seasoned teak wood free from knots oblique defects. Cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth composition of 65 percentage polyester and 35 percentage cotton or as approved by GE and make of cushion shall be kurlon oblique sleepwell. All the wooden joints shall be fixed with bamboo pins and nails shall not be used. All exposed wooden surface shall be finished with Deco polish in light walnut shade or as approved by GE. Rest all as specified oblique shown in drawing and directed by Engineer in Charge. | 3 | set | ageemnorth@1 | 100 | |
| 22 | Stool steel 305 x 305 x 510 mm | Top shall be 1mm thick MS sheet. Legs shall be 40x40x5mm angle Iron irrespective of shown in drawing. 40 x 40 x 5mm triangular piece shall be welded to bottom of legs. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified oblique shown in drawing and directed by Enginer in Charge. | 106 | nos | ageemnorth@1 | 100 | |
| 23 | Study table for library 8 feet x 4 feet x 2 point 5 feet | Study table for library 8 feet x 4 feet x 2 point 5 feet. As per trade pattern | 2 | nos | ageemnorth@1 | 100 | |
| 24 | Table centre | All wood shall be kiln seasoned first class teak wood free from knots and defects. Hard Rubber oblique Nylon buffers shall be fixed at the bottom of legs with brass screws. Top shall be 18 mm thick exterior grade pre laminated MDF board one side laminated in light Wallnut shade or as approved by GE, comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive Fevicol SH. All wood surfaces exposed to view when placed in position shall be french polished with high gloss finish. Rest all as per drawing. | 2 | nos | ageemnorth@1 | 100 | |
| 25 | Table conference for 26 persons | Table conference for 26 persons. As per trade pattern | 1 | nos | ageemnorth@1 | 100 | |
| 26 | Table office Clk steel | Top shall be 18 mm thick exterior grade pre laminated MDF board one side laminated in light Wallnut shade or as approved by GE comma duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive Fevicol SH. with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified oblique shown in drawing and directed by Enginer in Charge. | 137 | nos | ageemnorth@1 | 100 | |
| 27 | Table Office Officer steel | Top shall be 18 mm thick exterior grade MDF board one side laminated in light Wallnut shade or as approved by BSO oblique GE comma duly covered with 4 mm thick half round teak wood beading in matching shade with synthetic adhesive Fevicol SH. with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. Rest all as specified oblique shown in drawing and directed by Enginer in Charge. | 19 | nos | ageemnorth@1 | 100 | |
| 28 | Work bench workshop 1800mmx900mmx760mm | Over all size shall be 1800mm long comma 900mm wide and 760mm high. Four legs shall be of 32mm square MS tube of wall thickness 1 comma 6mm. Size of steel frame shall be 1700mm x 800mm x 720mm. Leg shall be 720mm high. Top of table shall be provided with 40mm thick wood planks of width not less than 150mm joined together to make flush joints. All steel surface shall be finished with shade of TA gray colour or as approved GE both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. Rest all as specified oblique shown in drawing and directed by Enginer in Charge. | 13 | nos | ageemnorth@1 | 100 | |
| 29 | Peg set of three | All as specified oblique shown in drawing and directed by Enginer in Charge. | 19 | nos | ageemnorth@1 | 100 | |
| 30 | Peg set of Six | All as specified oblique shown in drawing and directed by Enginer in Charge. | 60 | nos | ageemnorth@1 | 100 | |
| 31 | Woolen carpet 4m x 3.5m | Woolen carpet 4m x 3 point 5m | 2 | nos | ageemnorth@1 | 100 | |
| 32 | Mattress 78 inch x 36 inch x 4 inch | Mattress 78 inch x 36 inch x 4 inch. As per trade pattern | 1 | nos | ageemnorth@1 | 100 | |
| 33 | Pillow | Pillow | 1 | nos | ageemnorth@1 | 100 | |
| 34 | Table Bed Side | Top comma sides and front shall be 18mm thick exterior grade MDF board one side pre laminated comma as approved by GE comma duly covered with 4mm thick half round teak wood beading in matching shade with synthetic adhesive Fevicol SH. Sides and back of the drawers shall be made out of 12mm thick BWR plywood whereas for bottom of the drawer 8mm thick plywood shall be used. Front of the drawers shall be made out of 18mm thick exterior grade prelaminated MDF board. Each drawer shall be supported with telescopic channel for smooth functioning. One 4 inch long chromium plated handle of approved quality should also be provided in each drawer. All steel surface shall be finished with Black colour as approved by GE two coats of synthetic enamel paint upto obtaining glossy finishng over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. Rest all as specified oblique shown in drawing and directed by Enginer in Charge. | 1 | nos | ageemnorth@1 | 100 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
GeM-Bidding-9447953.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS