| GENERIC | Panel thickness | 52.4 mm (having cable management facility), 22.8 mm (no cable management ability) |
| GENERIC | Panel structure Hint : Panels are supported on legs with levellers at various locations (depending on the layout requirements) | For 52.4 mm – 2 nos. Vertical trim + Horizontal trims (at every division of blocks/tiles) + Blocks (for intermediate panels) + 1 no. of fabricated bottom frame (welded structure) + bottom tiles + top tiles + 1 no. of top trim, For 22.8 mm – 2 nos. Vertical trim + Horizontal trims (at every division of blocks/tiles) + Blocks (Intermediate/Top/Bottom) + 1 no. of top trim + 1 no. of end trim + 1 no. of end trim’s cap |
| MATERIAL | Blocks made out of | Composite construction of MDF and paper honeycomb, Particle board with laminate – (Laminate Block- 38 mm Honeycomb+ 3 mm MDF both side + 0.6 Laminate), Particle board with fabric (Fabric Block- 38 mm Honeycomb+ 3 mm MDF both side + 0.6 Fabric) |
| MATERIAL | Brackets made of | Work surface bracket and Holder bracket made from 2 mm thick CRCA grade D steel conforming to IS 513 - 19 |
| MATERIAL | Bracket sizes/width | 450 mm |
| MATERIAL | Panel legs (single side) size for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : select ‘NA’ if single side panel legs (for 52[dot]4 mm panel thickness) not required | N.A |
| MATERIAL | Panel legs (double side) size for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : select ‘NA’ if double side panel legs (for 52[dot]4 mm panel thickness) not required | 655 mm, 805 mm, 955 mm, 1105 mm, 1255 mm, N.A |
| MATERIAL | Panel legs (double side) size for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : select ‘NA’ if double side panel legs (for 22[dot]8 mm panel thickness) not required | 650 mm, 800 mm, 950 mm, 1100 mm, 1250 mm, N.A |
| PANEL COMPONENTS | Blocks for 52[dot]4 mm panel thickness Hint : these blocks are located in mid segment of the panels and can be provided with cut outs for mounting switch boxes (above or below the work tops) | Comprises of 38 mm thick paper honeycomb + 3 mm MDF on each sides + 0.6 mm decorative laminate on both sides – Particle board framing used on outer boundary of these blocks as well as intermediately at certain locations forming conduit for passing cables |
| PANEL COMPONENTS | Top tiles finish for 52[dot]4 mm panel thickness Hint : These tiles are slide in to the panels from top before fixing the top horizontal and supported from top and bottom side with clips fitted in horizontal extrusion | Fabric magnetic tiles (fabric upholstered metal tiles in 0.6 mm thick G.I Grade O conforming to IS 277), Fabric tack tiles (fabric upholstered metal tiles in 0.6 mm thick G.I Grade O conforming to IS 277 with P.E foam in the tile), Plain metal tiles (0.6 mm thick MS CRCA Grade D Conforming to IS 513 powder coated with Epoxy – polyester finish), Laminated tiles (9 mm to 9.5 mm thick pre-laminated particle board conforming to IS 12823 having all its edges with minimum 0.5 mm thick PVC edging), Post laminated tiles (8 mm thick pre-laminated particle board conforming to IS 12823 laminated with 0.6 mm thick high pressure laminate on outer side and 0.6 mm backing laminate on inner surface and having all its edges with minimum 0.5 mm thick PVC edging), White board tiles (8 mm thick pre-laminated particle board conforming to IS 12823 laminated with 0.6 mm thick white glossy high pressure laminate on outer side and 0.6 mm backing laminate on inner surface and having all its edges with minimum 0.5 mm thick PVC edging), Glass tiles (4 mm thick toughened clear glass fitted on both sides of panel using vertical and horizontal stiffners of 6 mm powder coated CRCA steel grade D conforming to IS 513), N.A |
| PANEL COMPONENTS | Height of Top tiles for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 260 mm (for panel height of 3 feet, 4 feet and 5 feet), 375 mm (for panel height of 3.5 feet), 415 mm (for panel height of 4.5 feet), N.A |
| PANEL COMPONENTS | Width of Top tiles for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A |
| PANEL COMPONENTS | Split Top tiles for 52[dot]4 mm and 22[dot]8 mm panel thickness Hint : For two different finishes in single panels | Not available |
| PANEL COMPONENTS | Height of Split top tiles for 52[dot]4 mm and 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes (according to panel height) are including the fabric or edge banding thickness if applicable | 260 mm (for panel height of 3 feet, 4 feet and 5 feet), 375 mm (for panel height of 3.5 feet), 415 mm (for panel height of 4.5 feet), N.A |
| PANEL COMPONENTS | Width of Split top tiles for 52[dot]4 mm and 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 290 mm, 440 mm, 590 mm, 740 mm, 890 mm, 1040 mm, 1190 mm, 1340 mm, 1490 mm, N.A |
| PANEL COMPONENTS | Bottom tiles finish for 52[dot]4 mm panel thickness Hint : Bottom tiles are press fitted on to the assembly frame of the panel with the help of snap on clips – Switches can be mounted on these bottom tiles as per buyer’s requirement | Fabric magnetic tiles, Plain metal tiles, Laminated tiles, Post-laminated tiles, N.A |
| PANEL COMPONENTS | Width of Bottom tiles for 52[dot]4 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 280 mm, 430 mm, 580 mm, 730 mm, 880 mm, 1030 mm, 1180 mm, 1330 mm, 1480 mm, 1630 mm, 1780 mm, N.A |
| PANEL COMPONENTS | Bottom Blocks for 22[dot]8 mm panel thickness | Fabric finish (made from 18 mm thick PPB/PLB upholstered with fabric using adhesives), Metal finish (made from two components of 0.8 mm thick M.S. CRCA Grade D conforming to IS 513 powder coated with epoxy polyester finish), Laminate finish (made from 18 mm thick particle board), N.A |
| PANEL COMPONENTS | Width of Bottom Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A |
| PANEL COMPONENTS | Width of Intermediate Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A |
| PANEL COMPONENTS | Top Blocks for 22[dot]8 mm panel thickness | Fabric finish (made from 18 mm thick PPB/PLB upholstered with fabric using adhesives), Laminate finish (made from 18 mm thick particle board), White board finish (made of 16 mm thick particle board laminated with 0.6 mm thick white glossy high pressure laminate on both sides and having all its edges with minimum 0.5 mm thick PVC edging), Fabric metal finish (made of two metal tiles of 0.6 mm G.I grade O conforming to IS 277 and fabric is upholsterd using synthetic thermoplastics pressure sensitive hot melt adhesive), Tackable finish (made from 18 mm thick PLB battens which hold 3 mm MDF in between and 6 mm thick PE foam pasted on 3 mm thick MDF and upholstered with fabric on both sides using adhesive), Glass finish (made of 4 mm thick toughened plain glass having diamond polish edge finish), N.A |
| PANEL COMPONENTS | Height of Top Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 260 mm, 375 mm, 415 mm, N.A |
| PANEL COMPONENTS | Width of Top Blocks for 22[dot]8 mm panel thickness (tolerances : +/- 10 mm) Hint : sizes are including the fabric or edge banding thickness if applicable | 285 mm, 435 mm, 585 mm, 735 mm, 885 mm, 1035 mm, 1185 mm, 1335 mm, 1485 mm, 1635 mm, 1785 mm, N.A |
| PANEL COMPONENTS | Height of End panel 22[dot]8 mm (tolerances : +/- 10 mm) Hint : This can be used in aisle conditions only | 935 mm, 965 mm, 1050 mm, 1080 mm, 1200 mm, 1235 mm, 1355 mm, 1390 mm, 1470 mm, 1500 mm, N.A |
| PANEL COMPONENTS | Width of End panel 22[dot]8 mm (tolerances : +/- 10 mm) Hint : This can be used in aisle conditions only | 1060 mm (suitable for 450 mm depth worktop), 1360 mm (suitable for 600 mm depth worktop), 1660 mm (suitable for 750 mm depth worktop), N.A |
| PANEL COMPONENTS | Bottom screen of end panel 22[dot]8 mm (off module fixing) | PLB – fabric finish blocks (made from 18 mm thick PPB/PLB upholstered with fabric using adhesive), Laminate finish blocks (made from 18 mm thick particle board), Metal finish blocks (made from two components – both components are 0.8 mm thick M.S. CRCA Grade D conforming to IS 513 powder coated with epoxy polyester finish and fastened together using M6 nutserts), N.A |
| PANEL COMPONENTS | Top screen of end panel 22[decimal]8 mm (off module fixing) | PLB – fabric finish blocks (made from 18 mm thick PPB/PLB upholstered with fabric using adhesive), Laminate finish blocks (made from 18 mm thick particle board), White board blocks (made from 16 mm thick particle board laminated with 0.6 mm white glossy high pressure laminate on both sides and having all its edges with minimum 0.5 mm thick PVC edging), N.A |
| PANEL COMPONENTS | Panel joinery / Posts (22[decimal]8 mm panels cannot be interconnected – these are joined as fin panels to 52[decimal]4 mm panels only using fin posts) Hint : panel can be joined to each other directly with 180 degree joinery or with help of post to | 2 way 180 degree, 2 way 90 degree, 3 way 90 degree, 4 way 90 degree, 2 way 120 degree, 3 way 120 degree, Single side (2 way ) End Fin LH/RH – for connecting 22.8 mm panels as fins with 52.4 mm on spine, Single side middle fin - for connecting 22.8 mm panels as fins with 52.4 mm on spine, Both side End Fin (3 way fin) - for connecting 22.8 mm panels as fins with 52.4 mm on spine, Both side shared fin (4 way) - for connecting 22.8 mm panels as fins with 52.4 mm on spine, N.A |
| PANEL COMPONENTS | Stability post – according to unit height - to avoid movement of free standing panels (tolerances : +/- 10 mm) Hint : End trim fixing is not required alongwith stability post | 930 mm (for 3 feet unit height) ), 1045 mm (for 3.5 feet unit height), 1200 mm (for 4 feet unit height, 1350 mm (for 4.5 feet unit height), 1464.5 mm (for 5 feet unit height) |
