Invitation to Bid - Vault (Strong Room) Door as per IS 11188 in EAST GODAVARI, ANDHRA PRADESH
Bid Publish Date
27-Jul-2026, 1:52 pm
Bid End Date
07-Aug-2026, 2:00 pm
EMD
₹24,000
Location
Progress
Quantity
3
Bid Type
Two Packet Bid
A tender has been published for Union Bank Of India (ubi) Vault (Strong Room) Door as per IS 11188 (Q2) in EAST GODAVARI, ANDHRA PRADESH. Quantity: 3 by. Submission Deadline: 07-08-2026 14: 00: 00. Check eligibility and apply.
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Vault (Strong Room) Door as per IS 11188 (Q2)
Advisory Bank
State Bank of India
Payment Timelines
Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
15
Delivery Locations
1
Delivery Cities
East Godavari
Delivery Pincodes
533101
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| Bamidi Muralikrishna | 533101,Regional office, Union Bank of India, ,D No.36-12-24, Jetty Towers, 2nd Floor, Innispeta, Rajahmundry - 533101. E.G.Dt. | East Godavari | Andhra Pradesh | 533101 | 3 | 15 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
GeM-Bidding-9666460.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Technical Specifications
1 Item
Item #1 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| Generic | Type of Vault (Strong Room) Door | Vault Main Doors |
| Generic | Classification of Vault (Strong Room) Door | B Class - TRTL 30, FR 30 |
| Generic | Opening of Door | Right Hand Side |
| Dimensions | Height of Door (Maximum) in mm | 2300 |
| Dimensions | Height of Door (Minimum) in mm | 2100 |
| Dimensions | Width of Door (Maximum) in mm | 1400 |
| Dimensions | Width of Door (Minimum) in mm | 1250 |
| Dimensions | Inside Height or clear opening of Door, when the shutter swings 180º in mm | 1950 |
| Dimensions | Inside Width or Clear Opening of Door, when the shutter swings 180º in mm | 900 |
| Dimensions | Minimum Thickness of door frame in mm if the door frame is made by single plate which is multi bended to form the door frame | 10, NA |
| Dimensions | Minimum Thickness of door frame in mm if the door frame is made by fabricating angle or any channel | 10, NA |
| Dimensions | Thickness of Angles for Grill Gate | Above 5 |
| Dimensions | Diameter of Grill Gate Road | Above 19 |
| Dimensions | Minimum Pitch of Grill Gate Road | Up to 100 |
| Dimensions | Thickness of Door Slabs over Rebates in mm | ≥29 |
| Dimensions | Thickness of Door Slabs over Lock in mm | ≥50 |
| Dimensions | Thickness of drill and oxyacetylene torch resisting layer (excluding mild steel plates) | ≥20 |
| Dimensions | Door Wall Thickness in mm | 305~380 |
| Dimensions | Actual Wall Thickness in mm | Any applicable numeric value |
| Dimensions | Number of Shooting Bolts on Hinge Side | 6 |
| Dimensions | Number of Shooting Bolts on Opposite Hinge Side | 6 |
| Dimensions | Number of Shooting Bolts on Top | NA |
| Dimensions | Number of Shooting Bolts on Bottom Side | NA |
| Dimensions | Cross section Area of Single Shooting Bolt | Any applicable numeric value |
| Dimensions | Depth of Engagement of Shooting Bolt in mm | ≥15 |
| Construction | Compression Mechanism | A continuous resilient packing is incorporated in the frame for compression mechanism for clenching the door tight against this packing in doors, this helps liquids or gases to pass through, NA |
| Construction | Time Lock (Optional) | The locking mechanism, shooting bolt mechanism and door design and construction is done in such a way that there are provisions for fixing time lock in the main Vault (Strong Room) door at the latter date for Class A, Class AA, Class AAA, NA for C Class, B Class and All Emergency Vault(Strong Room) Door, NA |
| Certification | Doors are Tested as approved by BIS | Class B Burglary resistance as per IS 11188 Part 2, Fire Endurance 11188 Part 3, Fire Hose Stream Reheat 11188 Part 4 |
| Certification | Warranty Period | 1.0 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Additional Doc 1 (Requested in ATC)
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 4
GeM-Bidding-9666460.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
Other Documents
OTHER
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS