TenderDekho Logo
GEM

Directorate Of Municipal Administration Water Tender Fire Brigade Vehicle Ahmednagar Maharashtra IS 950 2026

Bid Publish Date

23-Feb-2026, 3:06 pm

Bid End Date

10-Mar-2026, 8:00 pm

EMD

₹3,00,000

Location

AHMEDNAGAR , MAHARASHTRA

Progress

Issue23-Feb-2026, 3:06 pm
AwardPending
Explore all 4 tabs to view complete tender details

Quantity

2

Category

Water Tender Type B for Fire Brigade Use conforming to IS 950

Bid Type

Two Packet Bid

Tender Overview

The Directorate Of Municipal Administration, Urban Development Department, seeks a Water Tender for Fire Brigade use conforming to IS 950 for the district of Ahmednagar, Maharashtra. The project includes an EMD of ₹300,000 and a flexible quantity clause allowing up to a 25% increase/decrease during and after contract execution. Bidders must ensure OEM warranty coverage on chassis and all equipment, and establish functional service centers within the state. The tender emphasizes compliance with technical and functional IS 950 parameters and mandatory accessories as per clause 7*2. This procurement targets reliable high-pressure fire pumps, water tanks, and vehicle construction suitable for municipal firefighting operations. The contract may require on-site service support and adherence to vehicle emission and performance standards. Unique aspects include the option clause on quantity variation and post-award service obligations, with delivery and extension calculations tied to the original delivery period. The tender is positioned under Water Tender Type B for urban firefighting and specifies a framework for testing, materials, and paint as per IS 950 guidelines. Location-specific acceptance and post-bid commitments are critical for bidder selection and contract execution.

Technical Specifications & Requirements

  • Governing Specification: IS 950 (Fire appliance for municipal use) with clause references 5 (design), 72 (mandatory accessories), and 32 (performance)
  • Chassis Parameters: Maximum Gross Vehicle Weight, Axle Configuration, Maximum Engine Power (kW), Vehicle Emission Compliance, Seating in cabin, Air Conditioning in driver cabin
  • Functional Requirements: High/low pressure fire pump capacity, Water Tank Capacity (litre), Water Tank Material, Baffles & Manhole, Colour & Paint
  • Warranty: Chassis warranty in years; OEM warranty on equipment and accessories
  • Other Requirements: Material per IS 950 clause 4; Water Tank Material; Colour/paint specs; 7*2 mandatory accessories
  • Service & Support: Functional service centers in the state; dedicated toll-free support; escalation matrix

Terms, Conditions & Eligibility

  • EMD: ₹300,000 must be deposited as security for bid validity
  • Delivery: Delivery terms linked to last date of original delivery order; option to extend with minimum 30 days
  • GST: Bidder to self-declare applicable GST; reimbursement per actuals or prevailing rate
  • Service Centers: Must have in-state service center; if not, establish within 30 days of award; payment contingent on evidence
  • Financial Standing: Not under liquidation or bankruptcy; upload undertaking
  • Documentation: GST, PAN, experience certificates, financial statements, OEM authorizations, technical bid items; submission per terms

Key Specifications

  • IS 950 compliant fire pump capacity and performance specifications

  • Water Tank Capacity and Material as per IS 950 clause 4

  • Maximum Gross Vehicle Weight (GVW) and axle configuration

  • Maximum Engine Power (kW) at rated RPM

  • Vehicle Emission Compliance as per applicable standards

  • Chassis warranty duration and OEM warranty on equipment

  • Mandatory accessories as per clause 7*2 of IS 950

  • Seating capacity in cabin including driver; driver cabin air conditioning

Terms & Conditions

  • EMD amount ₹300,000; bid validity and security requirements

  • Quantity variation up to ±25% during contract and currency

  • In-state service center requirement with 30-day implementation

  • Delivery period defined from last date of original order with extension formula

  • GST treatment on reimbursements and bidder responsibility

Important Clauses

Payment Terms

GST handling by bidder; reimbursement at actuals or prevailing rate; no explicit payment split provided

Delivery Schedule

Delivery starts after order; option to increase quantity during currency with extension formula; minimum 30 days for added time

Penalties/Liquidated Damages

Not explicitly stated; delivery extension policies imply penalties via delivery delays under option clause

Bidder Eligibility

  • Not under liquidation, court receivership, or bankruptcy

  • Functional presence of service centre in-state or ability to establish within 30 days

  • Adherence to IS 950 specifications and OEM warranty requirements

Documents 5

GeM-Bidding-9030255.pdf

Main Document

CATALOG-Specification-1

CATALOG Specification

CATALOG-Specification-2

CATALOG Specification

Buyer uploaded ATC document

ATC

GEM General Terms and Conditions Document

GEM_GENERAL_TERMS_AND_CONDITIONS

Past Similar Tenders (Historical Results)

5 found

Water Tender Type B for Fire Brigade Use conforming to IS 950

Fire And Rescue Services Department

CHENNAI, TAMIL NADU

Posted: 15 July 2025
Closed: 14 August 2025
GEM

Water Tender Type B for Fire Brigade Use conforming to IS 950

Directorate Of Fire Service

WEST TRIPURA, TRIPURA

Posted: 18 February 2025
Closed: 8 March 2025
GEM

Water Tender Type B for Fire Brigade Use conforming to IS 950

Directorate Of Fire Service

WEST TRIPURA, TRIPURA

Posted: 18 February 2025
Closed: 8 March 2025
GEM

Water Tender Type B for Fire Brigade Use conforming to IS 950

Directorate Of Fire Service

WEST TRIPURA, TRIPURA

Posted: 18 February 2025
Closed: 8 March 2025
GEM

Water Tender Type B for Fire Brigade Use conforming to IS 950

East Khasi Hills District Police Shillong

Posted: 19 June 2025
Closed: 12 July 2025
GEM

Technical Specifications 2 Items

Item #1 Details

View Catalog
Category Specification Requirement
Certification Parameters Governing Specification IS 950
Chassis Parameters Maximum Gross Vehicle Weight including crew, water and equipment 16000 - 40000
Chassis Parameters Axle Configuration 4 X 2, 4 X 4, 6 X 2, 6 X 4
Chassis Parameters Maximum Engine Output / Power (kW) at rated RPM 100 - 400
Chassis Parameters Vehicle Emission Compliance BS VI
Chassis Parameters Performance Parameters (as per clause 3*2 of IS 950) 1. Maximum speed on level road (fully laden) - 72 km/h; 2. Acceleration from a standing start through the gears (fully laden) - 64 km/h in 55 s; 3. The appliance shall be capable of being started from rest on a gradient of 1 to 4; 4. When travelling at 48 km/h on a level dry surface the foot brake shall be capable of stopping the vehicle within a distance of 15 m from the point at which the brake is applied. The hand brake shall be capable of holding the fully laden appliance on a dry surface gradient of 1 in 4 when in neutral gear.
Chassis Parameters Seating Capacity in the cabin (Including driver) 6
Chassis Parameters Air Conditioning in Driver Cabin Yes, No
Functional Requirements Design and Construction (As per clause 5 of IS 950) Engine as per clause 5.1, Electrical System as per clause 5.2, Water Tank as per clause 5.3, Hose Reels as per clause 5.4, Pump as per clause 5.5, Suction Inlet and Delivery Valves as per clause 5.6, Primer as per clause 5.7, Pipelines and Valves as per clause 5.8, Control Panel as per clause 5.9, Water/Foam Monitor as per clause 5.10, Body Work and Stowage as per clause 5.11, Miscellaneous as per clause 5.12, Provision for Stowage of Equipments as per clause 5.13, Cable Winch as per clause 5.14, Telescopic Light Mast or Inflatable Emergency Lighting System as per clause 5.15, Alternator Unit as per clause 5.16, Ladder Gallows as per clause 5.17, Tool-Kit Container as per clause 5.18, Stability as per clause 5.19 of IS 950.
Functional Requirements High and low pressure fire pump capacity 2000 litre/min at 0.7 MPa and 300 litre/min at 3.5 MPa capacity, 3000 litre/min at 0.7 MPa and 300 litre/min at 3.5 MPa capacity, 4000 litre/min at 0.7 MPa and 300 litre/min at 3.5 MPa capacity
Functional Requirements Material as per clause 4 of IS 950 1. Material of Pump casing and low pressure impeller, Impeller ring and impeller neck ring - Lead tin bronze (Grade LTB 2 of IS 318); 2. Material of Pump shaft - Stainless steel (Grade 04Cr18Ni10 of IS 6603); 3. Material of Pump panel - Aluminium sheets/chequered plates (IS 737) or Mild steel sheets (IS 513); 4. All parts which form water ways or come into contact with water - stainless steel
Functional Requirements Water Tank Material 1. Mild steel treated for anti-corrosion shall be suitably mounted on the chassis in a manner keeping in view the proper load distribution on the axles. 2. The mild steel plates used for the tank shall be zinc plated or galvanized and shall be given adequate anti-corrosive treatment of epoxy treatment consisting of one coat of primer with two coats of finish after preparing the surface by sand blasting from inside and outside after fabrication if it is not galvanized.
Functional Requirements Water Tank Capacity (litre) 4500 - 7000
Functional Requirements Baffles & Manhole 1. Minimum 2 numbers of baffles fitted longitudinally and 2 numbers of baffles fitted transversely to prevent surge when the vehicle is breaking, cornering or accelerating. 2. The tank body and baffles shall be of minimum 5 mm thick mild steel plates. 3. Bolted manhole of 450 mm diameter minimum and shall have a gun metal threaded ring and cap of 300 mm diameter for filling the water tank from the top. 4. The manhole cover shall be made from 5 mm thick mild steel plate and epoxy coated from inside and outside. A cleaning hole of at least 250 mm diameter shall also be provided at the bottom.
Functional Requirements Colour and Paint Fire red colour conforming to Shade No. 536 of IS 5. The paint shall conform to IS 2932.
Functional Requirements Mandatory Accessories as per clause 7*2 of IS 950 Fire bell of 250 mm diameter, 2 nos Head lamps, 2 nos Fog lamps, Reversing light, Amber blinkers lights, Trafficators, Wind screen wipers, Tools required for normal routine maintenance of the appliance, battery operated siren, Search light, Spot light, Inspection lamp, Tail lamps, Rear reflectors, (Cab, instrument panel and locker, light), Public address system
Functional Requirements Miscellaneous 1. A suitable bumper shall be provided at the rear rigidly fixed to the super structural members by means of nuts and bolts, fabricated from 100 mm × 50 mm × 5 mm mild steel channel. 2. Two cat ladders made out of stainless steel round or square pipe of 25 mm diameter shall be provided. 3. Two numbers of 25 mm diameter aluminum pipe railing with sufficient number of aluminum double socket brackets shall be provided to the rear body over the deck. 4. A heavy duty towing hook shall be provided and fitted the rear bumper by means of nuts and bolts. 5. Quick removable type wire mesh guard made from 25 mm × 25 mm size mild steel wire mesh of 1.6 mm covered in mild steel angle frame shall be provided to all the glasses of driver-cum-crew cabin.
Warranty Chassis Warranty (Years) 1, 2, 3 Or higher
Warranty Equipment and accessories are provided with applicable OEM warranty Yes

🤖 AI-Powered Bidder Prediction

Discover companies most likely to bid on this tender

Live AI
Historical Data

Required Documents

1

GST registration certificate

2

Permanent Account Number (PAN) card

3

Experience certificates for similar fire brigade water tender procurement

4

Financial statements / turnover details

5

EMD submission receipt (₹300,000)

6

Technical compliance certificates and test reports

7

OEM authorizations or dealership certificates

8

Service center establishment proof (in-state) or plan to establish within 30 days

9

GST/Tax compliance documents

Frequently Asked Questions

Key insights about MAHARASHTRA tender market

How to bid for Ahmednagar IS 950 water tender in Maharashtra 2026?

To bid, ensure IS 950 compliance, provide EMD ₹300,000, arrange OEM warranty documentation, and submit GST, PAN, financials, and experience certificates. Establish an in-state service center or prove existing coverage. Comply with the 25% quantity variation clause and delivery rules tied to last order date.

What documents are required for the water tender in Ahmednagar?

Submit GST certificate, PAN, experience certificates for similar tenders, financial statements, EMD receipt of ₹300,000, OEM authorizations, technical bid, and proof of in-state service capability. Include IS 950 compliance certificates and pump capacity data with product specs.

Which standards govern the fire brigade water tender IS 950?

Governing standard is IS 950 for municipal firefighting appliances, including clauses 5 (design), 72 (mandatory accessories), and 32 (performance). Ensure water tank material, pump capacity, and chassis features meet these clauses and supplier warranties align with OEM terms.

What is the required EMD amount for this Maharashtra tender?

The EMD required is ₹300,000 to accompany the bid. Ensure payment method aligns with tender terms and include EMD submission proof in the technical bid package.

What delivery terms apply to quantity variations in this tender?

The buyer may vary quantity by ±25% at contract placement and during the currency, with delivery time calculated as (additional quantity/original quantity) × original delivery period, minimum 30 days; original period may limit extension.

Are service centers required in Maharashtra for this bid?

Yes. Bidders or OEM must have a functional service centre in the state of the consignee location; if absent, establish within 30 days of award, with payment conditioned on documentary evidence of setup and ongoing support.