Uranium Corporation Of India Limited Powder Coated Aluminium Works Tender Cuddapah Andhra Pradesh 2026
Bid Publish Date
16-Mar-2026, 11:12 am
Bid End Date
03-Apr-2026, 10:00 am
EMD
₹41,150
Value
₹41,12,694
Location
Progress
Quantity
5702
Category
Powder coated aluminium minimum thickness
Bid Type
Two Packet Bid
Key Highlights
- • Brand/OEM requirements: ISI marked aluminium fittings and ISI/ISI-related hardware implied by scope
- • Technical standards: ISI marked components; glazing with 4 mm frosted glass; GRG false ceiling tiles 595x595 mm
- • Special clauses: 25% quantity variation, extended delivery period rules, security deposit structure
- • Eligibility: EMD ₹41,150; 10% security deposit; bank guarantee acceptable; read NIT/ATC guidance
- • Warranty/AMC: Not explicitly stated in data; ensure commissioning and operator training included in scope
- • Penalties: Liquidated damages not explicit in provided terms; follow NIT terms and engineer guidance
- • Delivery/Installation: Includes supply, installation, testing, commissioning, and operator training; interface with RCC/brick work
Categories
117
Tender Overview
Uranium Corporation Of India Limited (Department of Atomic Energy) in CUDDAPAH, ANDHRA PRADESH invites bids for the Supply, Installation, Testing, and Commissioning of aluminium works, including training of operators and compliance with statutory clearances if any. The project scope encompasses multiple fabrication and finishing tasks such as powder-coated aluminium components, glazing with 4 mm frosted glass, ISI-marked fittings, and related carpentry and masonry interfaces. Estimated project value is ₹41,12,694.14 with an EMD of ₹41,150. The tender includes an option clause allowing quantity variations up to 25% during and after contract award. Delivery timelines hinge on order issuance and extended delivery rules; bidders should anticipate potential expansions at contracted rates. This is a comprehensive works package demanding coordinated supply, installation, testing, commissioning, and operator training. Unique differentiators include integration with civil works interfaces (brick, RCC) and a broad scope covering glazing, grills, hinges, locks, and GI/Aluminium sections.
Technical Specifications & Requirements
- Scope of supply: Supply, Installation, Testing, Commissioning of Goods; Training of operators; Statutory clearances (if any)
- EMD: ₹41,150; Bid security as per NIT terms
- Estimated value: ₹41,12,694.14; includes multiple aluminium & glazing items
- Delivery/extension: Option clause permits ±25% quantity changes; extended delivery rules apply
- Security deposit: 10% of awarded value; 50% upfront; 5% running bill deductions until security realized; payment via bank guarantee possible
- ATC notes: Read NIT terms; follow engineer-in-charge directions after work order
Terms, Conditions & Eligibility
- Security Deposit: 10% of awarded value; 50% upfront; remaining via running bills with 5% deduction until total security is realized; bank guarantee option available
- Option Clause: Up to 25% quantity variation during/after contract; extended delivery period with proportional time adjustment
- Scope of Supply: Includes Installation, Testing, Commissioning, and Operator Training; Statutory Clearances if required
- Bank Guarantee: As per corporation proforma; issued by Nationalized/Scheduled Bank; bidder bears charges
- Compliance: Adhere to NIIT terms and engineers’ directions; ensure payment terms and delivery schedules are met
Key Specifications
-
Scope: Supply, Installation, Testing, Commissioning of aluminium works and glazing
-
Value/EMD: ₹41,12,694.14; EMD ₹41,150
-
Variations: Up to 25% quantity change during/after contract
-
Security Deposit: 10% of awarded value; 50% upfront; 5% running bill deductions
-
Bank Guarantee: Proforma by Nationalized/Scheduled Bank
Terms & Conditions
-
25% quantity variation allowed during/after contract
-
10% security deposit; 50% upfront; 5% running bill deductions
-
Scope includes installation, testing, commissioning, and operator training
Important Clauses
Payment Terms
Payment will follow bank guarantee terms; 50% upfront security and 5% running bill deductions until total security realized; EMD submitted as per NIT
Delivery Schedule
Delivery period subject to option clause; extended delivery calculations based on additional quantity and original delivery period, minimum 30 days
Penalties/Liquidated Damages
Not explicitly detailed; bidders must adhere to NIIT terms and engineer-in-charge directions; LD terms to be per NIT
Bidder Eligibility
-
Proven experience in supply and installation of aluminium and glazing works
-
Financial capacity to support ₹41,12,694.14 project value
-
Compliance with NIIT terms and bank guarantee requirements
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
Powder coated aluminium minimum thickness , ventilators including providing and fixing hinges , Frosted glass sheet of nominal thickness 4 mm weighing , shutters and partitions Frosted glass sheet of nominal thickness 4 mm weighing , Filling the gap in between aluminium frame and adjacent RCC Brick Stone work , Providing and fixing Brass 100mm mortice latch and lock with 6 levers , Providing and fixing aluminium round shape handle , Providing and fixing ISI marked aluminium butt hinges , Providing and fixing aluminium hanging floor door stopper , Providing and fixing PVC window with float glass , Providing and fixing false ceiling at all heights with GRG Glass FibreReinforced Gypsum false ceiling tiles of Size 595x595 mm , Providing and fixing aluminium extruded section body tubular , Wall painting with plastic emulsion paint , Providing and fixing anodised aluminium grill anodised , Demolishing RCC work manually , Structural steel work riveted bolted or welded in built up sections , 15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand , Demolishing brick work , Brick work with non modular fly ash bricks
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9126220.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
19 Items Sign in to view GEM price trends Sign in for GEM prices
Powder coated aluminium minimum thickness
Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required EPDM rubber neoprene gasket etc Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing panelling CP brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge Glazing panelling and dash fasteners to be paid for separately For fixed portion Powder coated aluminium minimum thickness of powder coating 50 micron Make Jindal Hindalco
ventilators including providing and fixing hinges
Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required EPDM rubber neoprene gasket etc Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling CP brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge Glazing paneling and dash fasteners to be paid for separately For shutters of doors windows and ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required Fittings shall be paid for separately Powder coated aluminium minimum thickness of powder coating 50 micron Make Jindal Hindalco
Frosted glass sheet of nominal thickness 4 mm weighing
Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with EPDM rubber neoprene gasket etc complete as per the architectural drawings and the directions of engineer in charge Cost of aluminium snap beading shall be paid in basic item With float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm Subtract Float glass panes of nominal thickness 4 mm weight not less than 10 kg per sqm and Add Frosted glass sheet of nominal thickness 4 mm weighing not less than 10 kg per sqm Make Jindal Hindalco
shutters and partitions Frosted glass sheet of nominal thickness 4 mm weighing
Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with EPDM rubber neoprene gasket etc complete as per the architectural drawings and the directions of engineer in charge Cost of aluminium snap beading shall be paid in basic item With float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm Subtract Float glass panes of nominal thickness 4 mm weight not less than 10 kg per sqm and Add 4 mm thick ACP Make Jindal Hindalco
Filling the gap in between aluminium frame and adjacent RCC Brick Stone work
Filling the gap in between aluminium frame and adjacent RCC Brick Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in charge complete Upto 5mm depth and 5 mm width
Providing and fixing Brass 100mm mortice latch and lock with 6 levers
Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc complete
Providing and fixing aluminium round shape handle
Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc complete as per direction of Engineer in charge Powder coated minimum thickness 50 micron aluminium
Providing and fixing ISI marked aluminium butt hinges
Providing and fixing ISI marked aluminium butt hinges anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc complete 100 x75 x 4 mm
Providing and fixing aluminium hanging floor door stopper
Providing and fixing aluminium hanging floor door stopper ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour and shade with necessary screws etc complete Single rubber stopper
Providing and fixing PVC window with float glass
Providing and fixing PVC window with float glass of 4 mm thick complete in all respect Make Fenesta Komerling Prominnance Veka
Providing and fixing false ceiling at all heights with GRG Glass FibreReinforced Gypsum false ceiling tiles of Size 595x595 mm
Providing and fixing false ceiling at all heights with GRG Glass Fibre Reinforced Gypsum false ceiling tiles of Size 595x595 mm of approved texture design and patterns having moisture content less than 2 percentage humidity resistance of 99 percentage NRC 0 point 50 to 0 point 75 as per IS8225 1987 Non combustible as per BS 476 part 4 1970 and light reflectance of 85 percentage minimum to be laid in true horizontal level suspended on inter locking metal T Grid of hot dipped galvanised iron section of 0 point 33mm thick galvanized 120 grams per sqm including both sides comprising of main T runners of size 15x32mm of length 3000 mm cross T of size 15x32 mm of length 1200mm and secondary intermediate cross T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm suspended from ceiling using galvanised mild steel items galvanizing 80grams per sqm ie 50 mm long 8 mm outer diameter M 6 dash fasteners 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0 point 40 mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall woodscrews The work shall be carried out as per specifications drawing and as per directions of the Engineer in Charge With semi perforated 12 mm thick micro regular edged GRG false ceiling tiles
Providing and fixing aluminium extruded section body tubular
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with IS 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc complete Make Jindal Hindalco
Wall painting with plastic emulsion paint
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade with one or more coats on old work including cleaning and preparation of existing old surface to receive the new coat of painting including cost of materials tools and tackles labour etc complete as per directions of Engineer in charge Make Berger Nerolac Asian paints
Providing and fixing anodised aluminium grill anodised
Providing and fixing anodised aluminium grill anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 of approved design pattern with approved standard section and fixed to the existing window frame with CP brass stainless steel screws 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer in charge Only weight of grill to be measured for payment
Demolishing RCC work manually
Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of serviceable material within 50 metres lead as per direction of Engineer in charge
Structural steel work riveted bolted or welded in built up sections
Structural steel work riveted bolted or welded in built up sections and framed work like purlins frames trusses etc including cutting hoisting fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer all complete
15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand
15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand at all heights and lead as per directions of Engineer in charge
Demolishing brick work
Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge
Brick work with non modular fly ash bricks
Brick work with nonmodular fly ash bricks conforming to IS12894 class designation 10 average compressive strength in super structure above plinth level up to floor V level in
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | Powder coated aluminium minimum thickness | Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required EPDM rubber neoprene gasket etc Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing panelling CP brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge Glazing panelling and dash fasteners to be paid for separately For fixed portion Powder coated aluminium minimum thickness of powder coating 50 micron Make Jindal Hindalco | 250 | kg | ucilstoretmpl | 180 | |
| 2 | ventilators including providing and fixing hinges | Providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required EPDM rubber neoprene gasket etc Aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing paneling CP brass stainless steel screws all complete as per architectural drawings and the directions of Engineer in charge Glazing paneling and dash fasteners to be paid for separately For shutters of doors windows and ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required Fittings shall be paid for separately Powder coated aluminium minimum thickness of powder coating 50 micron Make Jindal Hindalco | 100 | kg | ucilstoretmpl | 180 | |
| 3 | Frosted glass sheet of nominal thickness 4 mm weighing | Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with EPDM rubber neoprene gasket etc complete as per the architectural drawings and the directions of engineer in charge Cost of aluminium snap beading shall be paid in basic item With float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm Subtract Float glass panes of nominal thickness 4 mm weight not less than 10 kg per sqm and Add Frosted glass sheet of nominal thickness 4 mm weighing not less than 10 kg per sqm Make Jindal Hindalco | 641 | sqm | ucilstoretmpl | 180 | |
| 4 | shutters and partitions Frosted glass sheet of nominal thickness 4 mm weighing | Providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with EPDM rubber neoprene gasket etc complete as per the architectural drawings and the directions of engineer in charge Cost of aluminium snap beading shall be paid in basic item With float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm Subtract Float glass panes of nominal thickness 4 mm weight not less than 10 kg per sqm and Add 4 mm thick ACP Make Jindal Hindalco | 300 | sqm | ucilstoretmpl | 180 | |
| 5 | Filling the gap in between aluminium frame and adjacent RCC Brick Stone work | Filling the gap in between aluminium frame and adjacent RCC Brick Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in charge complete Upto 5mm depth and 5 mm width | 225 | metre | ucilstoretmpl | 180 | |
| 6 | Providing and fixing Brass 100mm mortice latch and lock with 6 levers | Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc complete | 10 | each | ucilstoretmpl | 180 | |
| 7 | Providing and fixing aluminium round shape handle | Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc complete as per direction of Engineer in charge Powder coated minimum thickness 50 micron aluminium | 15 | each | ucilstoretmpl | 180 | |
| 8 | Providing and fixing ISI marked aluminium butt hinges | Providing and fixing ISI marked aluminium butt hinges anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc complete 100 x75 x 4 mm | 25 | each | ucilstoretmpl | 180 | |
| 9 | Providing and fixing aluminium hanging floor door stopper | Providing and fixing aluminium hanging floor door stopper ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour and shade with necessary screws etc complete Single rubber stopper | 10 | each | ucilstoretmpl | 180 | |
| 10 | Providing and fixing PVC window with float glass | Providing and fixing PVC window with float glass of 4 mm thick complete in all respect Make Fenesta Komerling Prominnance Veka | 20 | sqm | ucilstoretmpl | 180 | |
| 11 | Providing and fixing false ceiling at all heights with GRG Glass FibreReinforced Gypsum false ceiling tiles of Size 595x595 mm | Providing and fixing false ceiling at all heights with GRG Glass Fibre Reinforced Gypsum false ceiling tiles of Size 595x595 mm of approved texture design and patterns having moisture content less than 2 percentage humidity resistance of 99 percentage NRC 0 point 50 to 0 point 75 as per IS8225 1987 Non combustible as per BS 476 part 4 1970 and light reflectance of 85 percentage minimum to be laid in true horizontal level suspended on inter locking metal T Grid of hot dipped galvanised iron section of 0 point 33mm thick galvanized 120 grams per sqm including both sides comprising of main T runners of size 15x32mm of length 3000 mm cross T of size 15x32 mm of length 1200mm and secondary intermediate cross T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm suspended from ceiling using galvanised mild steel items galvanizing 80grams per sqm ie 50 mm long 8 mm outer diameter M 6 dash fasteners 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85x25x2 mm Galvanised iron perimeter wall angle of size 24x24x0 point 40 mm of length 3000 mm to be fixed on periphery wall partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall woodscrews The work shall be carried out as per specifications drawing and as per directions of the Engineer in Charge With semi perforated 12 mm thick micro regular edged GRG false ceiling tiles | 1,000 | sqm | ucilstoretmpl | 180 | |
| 12 | Providing and fixing aluminium extruded section body tubular | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with IS 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc complete Make Jindal Hindalco | 16 | each | ucilstoretmpl | 180 | |
| 13 | Wall painting with plastic emulsion paint | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade with one or more coats on old work including cleaning and preparation of existing old surface to receive the new coat of painting including cost of materials tools and tackles labour etc complete as per directions of Engineer in charge Make Berger Nerolac Asian paints | 2,000 | sqm | ucilstoretmpl | 180 | |
| 14 | Providing and fixing anodised aluminium grill anodised | Providing and fixing anodised aluminium grill anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15 of approved design pattern with approved standard section and fixed to the existing window frame with CP brass stainless steel screws 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer in charge Only weight of grill to be measured for payment | 750 | kg | ucilstoretmpl | 180 | |
| 15 | Demolishing RCC work manually | Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of serviceable material within 50 metres lead as per direction of Engineer in charge | 5 | cum | ucilstoretmpl | 180 | |
| 16 | Structural steel work riveted bolted or welded in built up sections | Structural steel work riveted bolted or welded in built up sections and framed work like purlins frames trusses etc including cutting hoisting fixing in position and applying two coats of synthetic enamel paint over a coat of approved steel primer all complete | 100 | kg | ucilstoretmpl | 180 | |
| 17 | 15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand | 15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand at all heights and lead as per directions of Engineer in charge | 200 | sqm | ucilstoretmpl | 180 | |
| 18 | Demolishing brick work | Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge | 10 | cum | ucilstoretmpl | 180 | |
| 19 | Brick work with non modular fly ash bricks | Brick work with nonmodular fly ash bricks conforming to IS12894 class designation 10 average compressive strength in super structure above plinth level up to floor V level in | 25 | cum | ucilstoretmpl | 180 |
Required Documents
GST Registration Certificate
Permanent Account Number (PAN) Card
Experience Certificates of similar works
Financial Statements / Turnover evidence
EMD submission proof (₹41,150) and Bank Guarantee option details
Technical bid documents and compliance certificates
OEM authorizations (if applicable)
Proforma bank guarantee as per NIT terms
Corrigendum Updates
1 Update Update
Extended Deadline
03-Apr-2026, 10:00 am
Opening Date
03-Apr-2026, 10:30 am
Technical Results
| S.No | Seller | Item | Date | Status |
|---|---|---|---|---|
| 1 | DPM ENTERPRISE PRIVATE LIMITED Under PMA | - | 29-03-2026 13:17:10 | |
| 2 | kprh trading & services Under PMA | - | 24-03-2026 21:11:27 | |
| 3 | NAGGARI VARA PRASAD Under PMA | - | 30-03-2026 09:25:22 | |
| 4 | SRI BALAJI ENGINEERING WORKS Under PMA | - | 25-03-2026 21:43:09 |
Financial Results
| Rank | Seller | Price | Item |
|---|---|---|---|
| L1 | kprh trading & services(MSE,MII)( MSE Social Category:General ) Under PMA | Item Categories : Powder coated aluminium minimum thickness,ventilators including providing and fixing hinges,Frosted | |
| L2 | SRI BALAJI ENGINEERING WORKS (MII) Under PMA | Item Categories : Powder coated aluminium minimum thickness,ventilators including providing and fixing hinges,Frosted |
Frequently Asked Questions
Key insights about ANDHRA PRADESH tender market
How to bid for aluminium works tender in Cuddapah 2026?
Bidders must submit GST, PAN, experience certificates, financials, and EMD ₹41,150. Provide technical bid with compliance to NIIT terms, OEM authorizations, and bank guarantees where required. Ensure scope includes supply, installation, testing, commissioning, and operator training. Follow engineer-in-charge directions after order.
What documents are required for this Cuddapah tender submission?
Required documents include GST certificate, PAN, experience certificates for similar works, financial statements, EMD receipt, technical bid, OEM authorization if applicable, and a bank guarantee as per NIT terms. Prepare in clear, scanned PDF format with proper indexing.
What is the EMD amount and its purpose for the procurement?
EMD is ₹41,150. It acts as a bid security to deter non-serious bids. It is typically deposited with the tendering authority and may be adjusted or forfeited if the bidder withdraws or fails to honor the bid terms.
What are the key delivery terms and quantity variation rules?
The contract allows up to 25% variation in quantity during and after award. Delivery timelines follow a formula based on original period; minimum extension is 30 days. Ensure plans account for potential scope expansion and adjust scheduling with the engineer-in-charge.
Which standards or certifications are required for aluminium works tender?
The scope implies ISI-marked components and ISI/related hardware; suppliers should provide OEM authorizations and ensure compliance with NIIT terms. Bank guarantees must be issued by Nationalized/Scheduled banks; adherence to NIT terms is mandatory.
What is included in the scope of supply for this tender?
Scope includes Supply, Installation, Testing, Commissioning of goods, plus Training of operators. It also mentions potential statutory clearances if required, and integration with civil works interfaces like RCC bricks and plastering for a complete retrofit.
When is payment typically processed for this procurement in Cuddapah?
Payment terms align with bank guarantee arrangements and contract milestones under NIT terms. Expect installments tied to running bill milestones, with final settlement upon successful commissioning and written certification by the Engineer-in-Charge.
Where can bidders obtain engineer-in-charge directions for this tender?
Bidders must follow directions issued by the Engineer-in-Charge after issuing the work order. Compliance with NIIT terms and the terms of the NIT is essential for progress payments, approvals, and acceptance testing.
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
GeM-Bidding-9126220.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS