Bids are Invited For 9911837443 Bolster for Press Tool Size 1500 L X 800W X 100MM T,9911839677 Bolster for Press Tool si in JALGAON, MAHARASHTRA
Bid Publish Date
03-Jul-2026, 9:58 am
Bid End Date
24-Jul-2026, 10:00 am
EMD
₹1,26,215
Location
Progress
Quantity
30
Category
9911837443 Bolster for Press Tool Size 1500 L X 800W X 100MM T
Bid Type
Two Packet Bid
Categories
20
Yantra India Limited invites bids for 9911837443 Bolster for Press Tool Size 1500 L X 800W X 100MM T, 9911839677 Bolster for Press Tool size 1000 L X 200W X 75 MM T, 9911839678 Bolster for press tTool size 1200 L X 700 W X 100MM T, 9911837447 Bolster for Press Tool Size 800 L Z 800 W X 100 MM T, 9911839351 Bolster for Pres Tool Size 1500 L X 1000 W X 100MM T, 9911839352 Bolster for Press Tool Size 1200 L X 1000 W X 100MM T, 9911839675 Bolster for Press Toll Size 400 L X400W X 75MM T, 9911837438 Bolster for Pres Tool Size 400 L X 350 W X 50 MM T, 9911837448 Bolster for Press Tool Size 1200L X 600 W X 100 MM T, 9911839114 Bolster for Press Tool Size 1000 L X 800 W X 100 MM T in JALGAON, MAHARASHTRA. Quantity: 30. Submission Deadline: 24-07-2026 10: 00: 00. Submit your proposal before the deadline.
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
No
Item Category
9911837443 Bolster for Press Tool Size 1500 L X 800W X 100MM T , 9911839677 Bolster for Press Tool size 1000 L X 200W X 75 MM T , 9911839678 Bolster for press tTool size 1200 L X 700 W X 100MM T , 9911837447 Bolster for Press Tool Size 800 L Z 800 W X 100 MM T , 9911839351 Bolster for Pres Tool Size 1500 L X 1000 W X 100MM T , 9911839352 Bolster for Press Tool Size 1200 L X 1000 W X 100MM T , 9911839675 Bolster for Press Toll Size 400 L X400W X 75MM T , 9911837438 Bolster for Pres Tool Size 400 L X 350 W X 50 MM T , 9911837448 Bolster for Press Tool Size 1200L X 600 W X 100 MM T , 9911839114 Bolster for Press Tool Size 1000 L X 800 W X 100 MM T
Advisory Bank
State Bank of India
ePBG Percentage
5%
ePBG Duration (Months)
14
Payment Timelines
Payments shall be made to the Seller within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GeM GTC)
Delivery Details
Max Delivery Days
60
Delivery Locations
1
Delivery Cities
JALGAON
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | JALGAON | JALGAON | - | - | 2 | 60 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 8
GeM-Bidding-9526555.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
Other Documents
OTHER
Other Documents
OTHER
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Bill of Quantities (BOQ)
10 Items Sign in to view GEM price trends Sign in for GEM prices
9911837443 Bolster for Press Tool Size 1500 L X 800W X 100MM T
Bolster for Press Tool Size 1500 L X 800W X 100MM T Tolerance +-2mm Material Grey Cast Iron to spec IS 210 of 1993 Grade FG-200 The casting shall be sound clean and free from porosity Blow holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand and Slag inclusions and other harmful Defects edges of casting should be right angle to each other Any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL LAB with ultrasonic test. Bolster shall be well dressed and fettled.
9911839677 Bolster for Press Tool size 1000 L X 200W X 75 MM T
Bolster for Press Tool size 1000 L X 200W X 75 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out. Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911839678 Bolster for press tTool size 1200 L X 700 W X 100MM T
Bolster for press Tool size 1200 L X 700 W X 100MM T Tolerance +-2mm, Material grey cast iron to spec IS 210 of 1993 Grade FG-200, the casting shall be sound, clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other ,any welding / repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911837447 Bolster for Press Tool Size 800 L Z 800 W X 100 MM T
Bolster for Press Tool Size 800 L Z 800 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tear, cold shuts Distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911839351 Bolster for Pres Tool Size 1500 L X 1000 W X 100MM T
Bolster for Pres Tool Size 1500 L X 1000 W X 100MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911839352 Bolster for Press Tool Size 1200 L X 1000 W X 100MM T
Bolster for Press Tool Size 1200 L X 1000 W X 100MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911839675 Bolster for Press Toll Size 400 L X400W X 75MM T
Bolster for Press Toll Size 400 L X400W X 75MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911837438 Bolster for Pres Tool Size 400 L X 350 W X 50 MM T
Bolster for Pres Tool Size 400 L X 350 W X 50 MM T Tolerance +-2mm, Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911837448 Bolster for Press Tool Size 1200L X 600 W X 100 MM T
Bolster for Press Tool Size 1200L X 600 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
9911839114 Bolster for Press Tool Size 1000 L X 800 W X 100 MM T
Bolster for Press Tool Size 1000 L X 800 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled.
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | 9911837443 Bolster for Press Tool Size 1500 L X 800W X 100MM T | Bolster for Press Tool Size 1500 L X 800W X 100MM T Tolerance +-2mm Material Grey Cast Iron to spec IS 210 of 1993 Grade FG-200 The casting shall be sound clean and free from porosity Blow holes Hard Sports Cracks Hot Tears Cold Shuts Distortion Sand and Slag inclusions and other harmful Defects edges of casting should be right angle to each other Any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL LAB with ultrasonic test. Bolster shall be well dressed and fettled. | 2 | pieces | ofbhrjshindestore | 60 | |
| 2 | 9911839677 Bolster for Press Tool size 1000 L X 200W X 75 MM T | Bolster for Press Tool size 1000 L X 200W X 75 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out. Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 3 | pieces | ofbhrjshindestore | 60 | |
| 3 | 9911839678 Bolster for press tTool size 1200 L X 700 W X 100MM T | Bolster for press Tool size 1200 L X 700 W X 100MM T Tolerance +-2mm, Material grey cast iron to spec IS 210 of 1993 Grade FG-200, the casting shall be sound, clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other ,any welding / repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 3 | pieces | ofbhrjshindestore | 60 | |
| 4 | 9911837447 Bolster for Press Tool Size 800 L Z 800 W X 100 MM T | Bolster for Press Tool Size 800 L Z 800 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tear, cold shuts Distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 5 | pieces | ofbhrjshindestore | 60 | |
| 5 | 9911839351 Bolster for Pres Tool Size 1500 L X 1000 W X 100MM T | Bolster for Pres Tool Size 1500 L X 1000 W X 100MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortions sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 2 | pieces | ofbhrjshindestore | 60 | |
| 6 | 9911839352 Bolster for Press Tool Size 1200 L X 1000 W X 100MM T | Bolster for Press Tool Size 1200 L X 1000 W X 100MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 2 | pieces | ofbhrjshindestore | 60 | |
| 7 | 9911839675 Bolster for Press Toll Size 400 L X400W X 75MM T | Bolster for Press Toll Size 400 L X400W X 75MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 5 | pieces | ofbhrjshindestore | 60 | |
| 8 | 9911837438 Bolster for Pres Tool Size 400 L X 350 W X 50 MM T | Bolster for Pres Tool Size 400 L X 350 W X 50 MM T Tolerance +-2mm, Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 3 | pieces | ofbhrjshindestore | 60 | |
| 9 | 9911837448 Bolster for Press Tool Size 1200L X 600 W X 100 MM T | Bolster for Press Tool Size 1200L X 600 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 3 | pieces | ofbhrjshindestore | 60 | |
| 10 | 9911839114 Bolster for Press Tool Size 1000 L X 800 W X 100 MM T | Bolster for Press Tool Size 1000 L X 800 W X 100 MM T Tolerance +-2mm Material grey cast iron to spec IS 210 of 1993 Grade FG-200 the casting shall be sound clean and free from porosity blow holes hard sports cracks hot tears cold shuts Distortion sand and slag inclusions and other harmful defect edges of casting should be right angle to each other any welding and or repairing should not have been carried out . Supplier must submit test report of material for physical and chemical properties from approved NABL lab with ultrasonic test. Bolster shall be well dressed and fettled. | 2 | pieces | ofbhrjshindestore | 60 |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Certificate (Requested in ATC) *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 8
GeM-Bidding-9526555.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
Other Documents
OTHER
Other Documents
OTHER
Other Documents
OTHER
Buyer uploaded ATC document
ATC
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS