Procurement Opportunity: Table Model Enterprise w/o cpu hanger of size 1650 x 900 x 728Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) ( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) in BIHAR
Bid Publish Date
02-Sep-2020, 12:51 pm
Bid End Date
22-Sep-2020, 1:00 pm
EMD
₹48,200
Value
₹24,08,000
Location
Progress
Tender Type
Open
Tender Fee
₹5,000
Tender Fee Exemption
No
EMD Exemption
No
Category
GENERAL
Categories
12
The issuing authority invites bids for Supply and installation of furniture at five locations of Sub-Divisional Control Room-cum-Customer facilitation centres at Riga(Sitamarhi), Chanpatia(Bettiah), Raghopur(Supaul), Amour(Purnea) and Krityanand Nagar(Purnea) under NBPDCL. Total estimated cost including all types of taxes. in BIHAR. Submission Deadline: 22-09-2020 13: 00: 00. Submit your proposal before the deadline.
Additional Tender Data
Commercial Details
Processing Fee
₹590
Tender Currency
INR
Bid Currency
INR
Ranking Sequence
L1 Ranking
Estimated Value Visibility
Y
Bid To RA
No
Authority & Contact
Organization Hierarchy
Government of Bihar->NORTH BIHAR POWER DISTRIBUTION COMPANY LIMITED->NBPDCL->Headquarter->Civil
Approving Authority
CHIEF ENGINEER(CIVIL),PATNA HQ (CE)
Tender Creator
Mr KUMAR CHAITANYA (SUPERINTENDENT ENGINEER)
Pre-Bid & Qualification
Pre-Bid Discussion Type
Not Required
Payment Breakdown
| Type | Amount | Currency | Mode | Exemption |
|---|---|---|---|---|
| EMD | ₹48,200 | INR | Internet Payment Gateway(IPG)| | No |
| Tender Fee | ₹5,000 | INR | Internet Payment Gateway(IPG)| | No |
| Tender Processing Fee | ₹590 | INR | Internet Payment Gateway(IPG)| | No |
Document Requirements
PAN No
GST Clearance
Income Tax Return of Previous Financial Year(2018-2019)
Registration of Agency as per clause no 15 a of Terms and Conditions
Existing Commitment in prescribed Format
Annual Financial Turnover for Financial year (2014 - 2015) in lac
Annual Financial Turnover for Financial year (2015- 2016) in lac
Annual Financial Turnover for Financial year (2016 - 2017) in lac
Annual Financial Turnover for Financial year (2017 - 2018) in lac
Annual Financial Turnover for Financial year (2018 - 2019) in lac
AAFT for three Financial year(16-17, 17-18, 18-19) in lac as per clause no 15 b of T&C
Bid Capacity Calculation as per clause no 15 d of Terms and Conditions
ExpCertcertifiedbyE/Iof theRankofEEorEqforProjment as per cl.no 15c of T&C
UNDERTAKINGSofNo aband any proj/Neverbeen in Litig/No relative or any person/ Not Debarred
Other Document if any
General Particulars
Designation of the Tenderer
Registration in BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007: Registration No-
Registration in BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007: Date Of Issue
Registration in BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007: Valid Upto
Registration in BIFMA, ISO 9001:2008, ISO 14001:2004, ISO 18001:2007: Name Of Department-
Receipt no. of Income Tax Return of previous financial Year(2018-2019)
PAN Number
GST Number
GST: Date of issue of Registration
Annual Financial Turnover for Financial year (2015- 2016) in lac
Annual Financial Turnover for Financial year (2016 - 2017) in lac
Annual Financial Turnover for Financial year (2017 - 2018) in lac
Annual Financial Turnover for Financial year (2018 - 2019) in lac
Average of Annual Financial Turnover for three Financial year(16-17, 17-18, 18-19)in lac as per clause no 15 b of Terms and Conditions
Bidding Capacity in lac as per clause no 15 d of Terms and Conditions
Projects completed in stipulated time during Last five Years (Specify Name & Cost of Project and Completion Year) as per clause no 15 c of Terms and Conditions
Amount of Existing commitments and ongoing works in Rupees
Tender Terms
Section 1
DetailsI / We have carefully gone through all Tender papers, Bid forms and Bill of Quantities and agree with the provisions.
Section 1
DetailsI / We have carefully gone through all Tender papers, Bid forms and Bill of Quantities and agree with the provisions.
I / We have carefully gone through all Tender papers, Bid forms and Bill of Quantities and agree with the provisions.
Section 2
DetailsI / We shall execute the work within the stipulated time of completion.
Section 2
DetailsI / We shall execute the work within the stipulated time of completion.
I / We shall execute the work within the stipulated time of completion.
Section 3
DetailsAll the entries made in Bid forms and all the Certificates submitted is true.
Section 3
DetailsAll the entries made in Bid forms and all the Certificates submitted is true.
All the entries made in Bid forms and all the Certificates submitted is true.
Section 4
TERMS AND CONDITIONS SDCR REV.pdfDetailsAccept All Terms and Conditions as per attachment
Section 4
TERMS AND CONDITIONS SDCR REV.pdfDetailsAccept All Terms and Conditions as per attachment
Accept All Terms and Conditions as per attachment
Section 5
EXISTING COMMITMENT PDF.pdfDetailsExisting Commitment Format
Section 5
EXISTING COMMITMENT PDF.pdfDetailsExisting Commitment Format
Existing Commitment Format
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
TERMS AND CONDITIONS SDCR REV.pdf
GENERAL_DOCUMENT
EXISTING COMMITMENT PDF.pdf
GENERAL_DOCUMENT
NIT-33.pdf
NIT
TERMS AND CONDITIONS SDCR.pdf
GENERAL_DOCUMENT
NIT33 PAPER CUTTING.pdf
NIT
Bill of Quantities (BOQ)
7 Items Sign in to view GEM price trends Sign in for GEM prices
Table Model Enterprise w/o cpu hanger of size 1650 x 900 x 728Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) ( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Table Model Enterprise w/o cpu hanger of size 1650 x 900 x 728Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) ( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Table Model Enterprise w/o cpu hanger of size 1350 x 750 x 728 Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Table Model Enterprise w/o cpu hanger of size 1350 x 750 x 728 Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Slimline Plain with 4 shelves of overall size 1950 mm H x 900 mm W x 507 mm D with four nos adjustable shelves made from CRCA Sheet as per IS -513 1994 (reaffirmed in 1998) Grade D or DD Quality of 0.8 mm thick completely Knock Down Construction, removable skirting to cover integral legs. Legs fitted with screw type leveler. Main door locking/handle flush with door made from Zinc Alloy, 3 way 90 degree removable key type cam lock mechanism, Epoxy powder coated paint.( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Slimline Plain with 4 shelves of overall size 1950 mm H x 900 mm W x 507 mm D with four nos adjustable shelves made from CRCA Sheet as per IS -513 1994 (reaffirmed in 1998) Grade D or DD Quality of 0.8 mm thick completely Knock Down Construction, removable skirting to cover integral legs. Legs fitted with screw type leveler. Main door locking/handle flush with door made from Zinc Alloy, 3 way 90 degree removable key type cam lock mechanism, Epoxy powder coated paint.( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Visitor Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Visitor Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Mid Back Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM . PNEUMATIC HEIGHT ADJUSTMENT -The pneumatic height adjustment has an adjustment stroke of 12.0 cm.( Make :-Godrej , Featherlite , HNI or Equivalent )
Mid Back Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM . PNEUMATIC HEIGHT ADJUSTMENT -The pneumatic height adjustment has an adjustment stroke of 12.0 cm.( Make :-Godrej , Featherlite , HNI or Equivalent )
Steel MF System of size 6'x36"x18" with Six Shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Steel MF System of size 6'x36"x18" with Six Shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964( Make :-Godrej , ISIT, Durian , HNI and Equivalent )
Centiguard fire resistance safe1254 ( H ) X 580 ( W ) X 587 ( D ) mm gross weight 236 KG Volume 169 litres ( Make:-Godrej , ISIT, Durian , HNI and Equivalent )
Centiguard fire resistance safe1254 ( H ) X 580 ( W ) X 587 ( D ) mm gross weight 236 KG Volume 169 litres ( Make:-Godrej , ISIT, Durian , HNI and Equivalent )
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Mandatory | Price Trends |
|---|---|---|---|---|---|---|---|---|
| 01 | Table Model Enterprise w/o cpu hanger of size 1650 x 900 x 728Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) ( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | Table Model Enterprise w/o cpu hanger of size 1650 x 900 x 728Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) ( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | 5 | No | - | - | Yes | |
| 02 | Table Model Enterprise w/o cpu hanger of size 1350 x 750 x 728 Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | Table Model Enterprise w/o cpu hanger of size 1350 x 750 x 728 Top made up of 18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Modesty Panel-18mm thk. Pre Laminated Particle Board (PLB) All work surface edges are duly sealed with 2mm thick PVC Edgebanding,Rectangular Frame-Fabricated component in 1.2mm thick CRCA (IS:513), Finish: Powder coat (Epoxy polyester),Leg-Fabricated component in 38mmx25mmx1.2mm thick MS ERW Tube (IS:7138), Finish: Powder coat (Epoxy polyester) Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | 20 | No | - | - | Yes | |
| 03 | Slimline Plain with 4 shelves of overall size 1950 mm H x 900 mm W x 507 mm D with four nos adjustable shelves made from CRCA Sheet as per IS -513 1994 (reaffirmed in 1998) Grade D or DD Quality of 0.8 mm thick completely Knock Down Construction, removable skirting to cover integral legs. Legs fitted with screw type leveler. Main door locking/handle flush with door made from Zinc Alloy, 3 way 90 degree removable key type cam lock mechanism, Epoxy powder coated paint.( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | Slimline Plain with 4 shelves of overall size 1950 mm H x 900 mm W x 507 mm D with four nos adjustable shelves made from CRCA Sheet as per IS -513 1994 (reaffirmed in 1998) Grade D or DD Quality of 0.8 mm thick completely Knock Down Construction, removable skirting to cover integral legs. Legs fitted with screw type leveler. Main door locking/handle flush with door made from Zinc Alloy, 3 way 90 degree removable key type cam lock mechanism, Epoxy powder coated paint.( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | 25 | No | - | - | Yes | |
| 04 | Visitor Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | Visitor Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: The Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 at 25% compression. 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene.The powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk M.S. ER.W. Tube( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | 75 | No | - | - | Yes | |
| 05 | Mid Back Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM . PNEUMATIC HEIGHT ADJUSTMENT -The pneumatic height adjustment has an adjustment stroke of 12.0 cm.( Make :-Godrej , Featherlite , HNI or Equivalent ) | Mid Back Chair The seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. Dimension BACK SIZE - 47.5 cm. (W) x 58.0cm. (H) & SEAT SIZE 47.0 cm. (W) x 48.0 cm. (D). POLYURETHANE FOAM: 3) ARMRESTS: The one-piece armrests are injection moulded from black Co-polymer Polypropylene. 4) CENTER TILT SYNCHRO MECHANISM . PNEUMATIC HEIGHT ADJUSTMENT -The pneumatic height adjustment has an adjustment stroke of 12.0 cm.( Make :-Godrej , Featherlite , HNI or Equivalent ) | 40 | No | - | - | Yes | |
| 06 | Steel MF System of size 6'x36"x18" with Six Shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | Steel MF System of size 6'x36"x18" with Six Shelves made of slotted angle Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05mm, Panels/Shelves : 6 Bend bending process of 905(L) x 448(D) of load capacity 80 Kgs. UDL Max. per shelf , All fasteners of electro perk arised as per IS : 3655 -1985 Painting: All Steel components of powder coated as per IS: 101/1964( Make :-Godrej , ISIT, Durian , HNI and Equivalent ) | 40 | No | - | - | Yes | |
| 07 | Centiguard fire resistance safe1254 ( H ) X 580 ( W ) X 587 ( D ) mm gross weight 236 KG Volume 169 litres ( Make:-Godrej , ISIT, Durian , HNI and Equivalent ) | Centiguard fire resistance safe1254 ( H ) X 580 ( W ) X 587 ( D ) mm gross weight 236 KG Volume 169 litres ( Make:-Godrej , ISIT, Durian , HNI and Equivalent ) | 5 | No | - | - | Yes |
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Explore More Opportunities
Unlock Tender Documents
Sign up now to access all documents
Documents 5
TERMS AND CONDITIONS SDCR REV.pdf
GENERAL_DOCUMENT
EXISTING COMMITMENT PDF.pdf
GENERAL_DOCUMENT
NIT-33.pdf
NIT
TERMS AND CONDITIONS SDCR.pdf
GENERAL_DOCUMENT
NIT33 PAPER CUTTING.pdf
NIT