Indian Army Cable Tender 2026 for Generic Passive Cables — ISO 9001 Certified Cables, India
Bid Publish Date
11-Aug-2026, 6:08 pm
Bid End Date
07-Sep-2026, 9:00 pm
Progress
Tender Overview
The Indian Army (Department of Military Affairs) invites bids for a broad category of generic cables. The procurement covers multiple cable attributes including conductor material, insulation type, number of cores, nominal cross sectional area, sheath type, and related cable categories. The BOQ comprises 101 items, though explicit item quantities are not disclosed in the available data. The tender envisions flexible quantity management with an option to increase up to 50% of the bid quantity and extended delivery periods based on the option clause. A delivery schedule will be linked to the sequencing of original and extended orders. The vendor must meet ISO 9001 certification for the offered products or OEMs. This tender focuses on standard compliance and supply of military-grade cabling, with emphasis on traceable quality controls and supplier eligibility criteria.
Technical Specifications & Requirements
- Category of Cable; Conductor Material; Form of Conductor; Nominal Cross Sectional Area (in Sq mm); Type of Insulation; Number of Core; Sheath Type.
- Tender demands conformity to general cable specifications and quality controls; no single fixed quantity disclosed; primary emphasis on standardization, material compatibility, and deliverable scope for military applications.
- Mandatory certification: ISO 9001 (bidder or OEM) and evidence of turnover credentials; detailed documentation will accompany bid submission.
- BOQ contains 101 line items; actual unit quantities are not provided in the available data, signaling a broad supply scope once requirements are clarified.
Terms, Conditions & Eligibility
- Option Clause: Purchaser may adjust quantity by up to 50% during contract and currency; delivery time scales with a calculated method; minimum delivery extension rule applies.
- Required documents with bid: PAN Card, GSTIN, cancelled cheque, and EFT mandate certified by bank.
- Certifications: Bidder or OEM must hold ISO 9001 certification; non-compliance may lead to rejection.
- Turnover: Minimum average annual turnover over the last 3 financial years as specified in bid document; audited balance sheets or CA/Cost Accountant certificates required.
- OEM turnover also required if OEM is the bidder; data must be provided as per document criteria.
- Basic bidder eligibility includes submission of all required documents and compliance with ATC/ Corrigendum, if any.
Key Specifications
-
Category of Cable
-
Conductor Material
-
Form of Conductor
-
Nominal Cross Sectional Area (Sq mm)
-
Type of Insulation
-
Number of Core
-
Sheath Type
-
ISO 9001 certification requirement
-
Turnover criteria for bidder and OEM
Terms & Conditions
-
Quantity may be increased up to 50% during contract and currency as per option clause
-
Delivery period adjusts with quantity and extended delivery periods
-
Mandatory documents include PAN, GSTIN, cancelled cheque, and EFT mandate
-
ISO 9001 certification required for bidder or OEM
-
Last three years turnover evidence required for bidder and OEM
Important Clauses
Payment Terms
Not specified in data; standard government procurement terms typically apply, with payment upon delivery and acceptance per contract
Delivery Schedule
Delivery period commences from the last date of original delivery order; additional time calculated by (increased quantity ÷ original quantity) × original delivery period, minimum 30 days
Penalties/Liquidated Damages
Not specified in data; standard LD provisions are expected under procurement norms
Bidder Eligibility
-
Must hold ISO 9001 certification (bidder or OEM)
-
Minimum average turnover over last 3 financial years as per bid document
-
Submit PAN, GSTIN, cancelled cheque, EFT mandate with bid
-
Capability to supply generic cable categories with specified conductor and insulation characteristics
Tender Data
Bid Details
Quantity
2455
Category
PVC Insulated Copper Cable Single Core and Multi Core Circular Sheathed with Rigid Conductor (V2) ISI Marked To IS 694
Bid Type
Two Packet Bid
Bid Validity
120 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
H1-Highest Priced Bid Elimination
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
No
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
Yes
Bid Splitting Applied
No
Requirements
Past Performance
50 %
Experience Required
2 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
6
Delivery Details
Max Delivery Days
120
Delivery Locations
1
Delivery Cities
PASCHIM MEDINIPUR
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | PASCHIM MEDINIPUR | PASCHIM MEDINIPUR | - | - | 20 | 120 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 5
GeM-Bidding-9731405.pdf
Main Document
CATALOG-Specification-1
CATALOG Specification
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Corrigendum Updates
2 Updates Update
Update
Extended Deadline
07-Sep-2026, 3:30 pm
Opening Date
07-Sep-2026, 4:00 pm
Bill of Quantities (BOQ)
101 Items Sign in to view GEM price trends Sign in for GEM prices
S and F in repair expansion valve required for AC plant of capacity 5.5 TR Complete all as specified and directed by Engr-in-charge
S and F in repair expansion valve required for AC plant of capacity 5.5 TR Complete all as specified and directed by Engr-in-charge
M and L for cleaning of evaporator coils of AC plant of capacity 5.5 TR with dilute HCL by force feed method to remove the dust particle formed on the coil
M and L for cleaning of evaporator coils of AC plant of capacity 5.5 TR with dilute HCL by force feed method to remove the dust particle formed on the coil and fins, cleaning of liquid lines stainer expansion valve
M and L for servicing incl cleaning of condensor, cooling coil, refrigerant coils fins with mild detergent and descaling of condensor coil for Package type 5.5 TR AC
M and L for servicing incl cleaning of condensor, cooling coil, refrigerant coils fins with mild detergent and descaling of condensor coil for Package type 5.5 TR AC of including leake testing with N2 gas any make capacity complete all as specified and directed by Engr-in-Charge
Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 5.5 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC
Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 5.5 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge and testing on load for 24 hrs
Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 11 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC
Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 11 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge and testing on load for 24 hrs
M and L for servicing incl cleaning of condensor and evaporator coils fins with mild detergent and descaling of condensor coil for split type AC of any make capacity after taking down the whole unit
M and L for servicing incl cleaning of condensor and evaporator coils fins with mild detergent and descaling of condensor coil for split type AC of any make capacity after taking down the whole unit
Supply fixing in replacement of V Belt of size A-28, A 32 suitable for 11 by 5.5 TR Capacity package Unit AC all as specified and directed by Engr-in-charge
Supply fixing in replacement of V Belt of size A-28, A 32 suitable for 11 by 5.5 TR Capacity package Unit AC all as specified and directed by Engr-in-charge
S and F micro filter for AC Plant of capacity 5.5 TR complete all as specified and directed by Engr-in-charge
S and F micro filter for AC Plant of capacity 5.5 TR complete all as specified and directed by Engr-in-charge
Taking out blower motor shaft from AC plant of capacity 5.5 TR welding and grinding on lathe to make suitable alignment with bearing then refixed
Taking out blower motor shaft from AC plant of capacity 5.5 TR welding and grinding on lathe to make suitable alignment with bearing then refixed complete all as specified and directed by Eng in charge
S and F in replacement of outdoor fan motor for package AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge
S and F in replacement of outdoor fan motor for package AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge
S and F in repair fan blade of outdoor unit of AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge
S and F in repair fan blade of outdoor unit of AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge
S and F connector for 30-40 AMPS, 440 volts complete all as specified and directed by Engg-in-charge
S and F connector for 30-40 AMPS, 440 volts complete all as specified and directed by Engg-in-charge
S and F Auto change over switch for package type AC plant 11 TR complete all as specified and directed by Engg-in-charge
S and F Auto change over switch for package type AC plant 11 TR complete all as specified and directed by Engg-in-charge
S and F Auto change over switch for package type AC plant 16.5 TR complete all as specified and directed by Engg-in-charge
S and F Auto change over switch for package type AC plant 16.5 TR complete all as specified and directed by Engg-in-charge
Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling appliances
Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling appliances ,charging cost incl in this item
Supply and charging R-407 gas to maintain the required cooling effect as and when required in the package type AC other cooling appliances
Supply and charging R-407 gas to maintain the required cooling effect as and when required in the package type AC other cooling appliances charging cost incl in this item
S and F in replacement of insulation Nitrile rubber 1 by 6 size including fixing
S and F in replacement of insulation Nitrile rubber 1 by 6 size including fixing
S and F in replacement of insulation Nitrile rubber 1 by 8 inch size including fixing
S and F in replacement of insulation Nitrile rubber 1 by 8 inch size including fixing
S and F in replacement of insulation Nitrile rubber 5 by 8 inch size including fixing
S and F in replacement of insulation Nitrile rubber 5 by 8 inch size including fixing
S and F in replacement of Copper pipe of size 1 by 4 size including fixing
S and F in replacement of Copper pipe of size 1 by 4 size including fixing
S and F in replacement of Copper pipe of size 1 by 2 size including fixing
S and F in replacement of Copper pipe of size 1 by 2 size including fixing
S and F in replacement of Copper pipe of size 5 by 8 size including fixing
S and F in replacement of Copper pipe of size 5 by 8 size including fixing
Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler. Refrigerator and other cooling appliances complete all as specified and directed
Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler. Refrigerator and other cooling appliances complete all as specified and directed
Supply and charging Nitrogen gas for finding out leakage as and when required as specified and directed by Engr in charge
Supply and charging Nitrogen gas for finding out leakage as and when required as specified and directed by Engr in charge
S and F in replacement of Printed Circuit Board with CT coil complete suitable for 16.5 TR capacity Package type AC Plant.
S and F in replacement of Printed Circuit Board with CT coil complete suitable for 16.5 TR capacity Package type AC Plant.
S and F in replacement of Printed Circuit Board with CT coil complete suitable for 11 TR capacity Package type AC Plant.
S and F in replacement of Printed Circuit Board with CT coil complete suitable for 11 TR capacity Package type AC Plant.
Supply and fixing in replacement of Capacitor 36 MFD complete all as specified by Engr- in- Charge
Supply and fixing in replacement of Capacitor 36 MFD complete all as specified by Engr- in- Charge
Supply and fixing in replacement of Capacitor 45 MFD complete all as specified by Engr- in- Charge.
Supply and fixing in replacement of Capacitor 45 MFD complete all as specified by Engr- in- Charge.
Supply and fixing in replacement of Capacitor 50 plus 6 MFD complete all as specified by Engr- in- Charge.
Supply and fixing in replacement of Capacitor 50 plus 6 MFD complete all as specified by Engr- in- Charge.
Supply and fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote, etc.
Supply and fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote, etc.
Supply and fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote, etc.
Supply and fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote, etc.
Disconnecting, dismantling and taking out existing burnt out compressor from window by Split type Air conditioner 2 TR Capacity
and supply and fixing sealed unit compressor of existing capacity 2 TR, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge.
Disconnecting, dismantling and taking out existing burnt out compressor from window by Split type Air conditioner 1.5 TR Capacity
and supply and fixing sealed unit compressor of existing capacity 1.5 TR, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge.
Shifting of split type AC from MES yard existing location to the new location by taking it out after filling the opening of old location with cement mortar
applying white wash on wall with matching with existing colour of the site and making opening holes on brick wall at new location and gap well finished with cement mortar, applying white wash, colour wash, distemper etc on wall to match with existing colour of the adjacent surface , installation and commissioning with replacement of insulation of suction and discharge line.
Shifting of window type AC from MES yard by existing location to the site new location where directed and installation by making necessary
opening of brick wall by window and preparing gap well finished by cement mortar applying white washing in matching with the existing colour, disposal of waste material by filling gap with plywood on front side of AC and outer corner of plywood applying two coats of enamelled paint over a coat of primer on plywood surface to match the existing location all as directed by the Engr-in-Charge.
Repair by Mantance for split Acs 1.5 by 2.0 Ton of any make any type installed at various location by carrying necessary repairs cleaning filters
adjustment of asemblies sub-assymbles check the level of refrigerant arresting the leakege of any type replacement of parts calibration including cleaning of condenser and evaporator fins with mild detergent and desclaing of condenser coil for split acs complete all as specified here in after and as specified in particular specification.
Repair by Mantance for Window Acs 1.5 by 2.0 Ton of any make any type installed at various location by carrying necessary repairs cleaning filters adjustment
of asemblies sub-assymbles check the level of refrigerant arresting the leakege of any type replacement of parts calibration including cleaning of condenser and evaporator fins with mild detergent and desclaing of condenser coil for split acs complete all as specified here in after and as specified in particular specification.
Shifting of split type AC from MES yard existing location to the new location, filling the opening of old location with cement mortor, applying white wash on wall with existing colour
of the site and making opening holes on brick wall at new location well finish with cement mortor, applying white wash distemper etc on wall to match with existing colour of the adjacent surface commissioning with replacement of insulation of suction discharge line complete installation
Shifting of window type AC from MES yard existing location to the site by new location where directed and installation by making necessary opening of brick wall window
and preparing gap well finished by cement mortor applying white washing in matching with the existing colour, disposal of waste material/filling gap with ply wood on front side of AC and outer corner of ply wood applying two coats of enamelled paint tiver a coat of primer on plywood surface to match the existing location all as directed by the Engr-in Charge
Shifting of water cooler by refrigerator electric driven single phase having any make and capacity from MES
and existing location by taking after disconnection of electric and water line and refixi the same in any u.her new location incl water and electric reconnection complete all as specified and as directed
Supply fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge
Supply fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge
Supply fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge
Supply fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge
Disconnecting, dismantling and taking out existing burnt out compressor from window Split type Air conditioner 2 TR Capacity and supply and fixing sealed unit compressor of existing capacity 2 TR
single phase. 230 V AC supply initialy filled with compressor oil as speciifed by Engr-in-charge
Disconnecting, dismantling and taking out existing burnt out compressor from window Split type Air conditioner 1.5 TR Capacity and supply and fixing sealed unit compressor of existing capacity 1.5 TR
single phase. 230 V AC supply initialy filled with compressor oil as speciifed by Engr-in-charge
Disconnecting, dismantling and taking out existing burnt out compressor from water cooler of 40-60 Ltr per Hour and supply and fixing sealed unit of existing cap 40-60 Ltr per Hour compressor
Disconnecting, dismantling and taking out existing burnt out compressor from water cooler of capacity 40 to 60 Ltr per Hour and supply and fixing sealed unit of existing cap 40 to 60 Ltr per Hour compressorsingle phase 230 volts supply
Disconnecting, dismantling taking out existing burnt out compressor from water cooler of 80-100 Ltr per Hour and supply and fixing sealed unit of existing cap 80-100L ompressor 1 phase 230v
Disconnecting, dismantling and taking out existing burnt out compressor from water cooler of capacity 80 to 100 Ltr per Hour and supply and fixing sealed unit of existing cap 80 to 100 Ltr per Hour compressorsingle phase 230 volts supply
Disconnecting, dismantling taking out existing burnt out compressor from domestic type refrigerator Cap 286 Ltr S and F hematically sealed compressor unit of existing Make and model
Disconnecting, dismantling and taking out existing burnt out compressor from domestic type refrigerator Cap 286 Ltr S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas &testing on load on 24 hrs for smooth functioning.
Disconnecting, dismantling and taking out existing burnt out compressor from domestic type refrigerator Cap 300 by 310 Ltr S and F hematically sealed compressor unit of existing Make and model
Disconnecting, dismantling and taking out existing burnt out compressor from domestic type refrigerator Cap 300 by 310 Ltr S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas and testing on load on 24 hrs for smooth functioning.
Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 300 ltrs S and F hematically sealed compressor unit of existing Make and model
Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 300 ltrs S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas and testing on load on 24 hrs for smooth functioning.
Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 500 ltrs S and F hematically sealed compressor unit of existing Make and model
Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 500 ltrs S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas and testing on load on 24 hrs for smooth functioning.
Supply and fix indoor PCB board suitable for the inverter type AC 1.5 by 2 0 Ton AC all as specified and as directed
Supply and fix indoor PCB board suitable for the inverter type AC 1.5 by 2 0 Ton AC all as specified and as directed
Supply and fix outdoor PCB board suitatile for the inverter type AC 1.5 by 2.0 Ton AC all as specified and as directed
Supply and fix outdoor PCB board suitatile for the inverter type AC 1.5 by 2.0 Ton AC all as specified and as directed
Supply and fixing in replacement of AC blower by outdoor fan motor for AC suitable for 2 TR AC suitable for operation on 230 Volt AC supply at 50 HZ
Supply and fixing in replacement of AC blower by outdoor fan motor for AC suitable for 2 TR AC suitable for operation on 230 Volt AC supply at 50 HZ
Supply and fix indoor PCB board suitable for 1.5 TR AC Window tepe AC suitable operate on 230 Volt AC supply at 50 HZ
Supply and fix indoor PCB board suitable for 1.5 TR AC Window tepe AC suitable operate on 230 Volt AC supply at 50 HZ
Supply and fix indoor PCB board suitable for water cooler of Cap 40 by 80 Ltrs
Supply and fix indoor PCB board suitable for water cooler of Cap 40 by 80 Ltrs
Supply and fix indoor PCB board suitable for water cooler of Cap 150 Ltrs
Supply and fix indoor PCB board suitable for water cooler of Cap 150 Ltrs
Supply and fixing in replacement of Capacitor 4 MFD
Supply and fixing in replacement of Capacitor 4 MFD
Supply and fixing in replacement of Capacitor 45 plus 6 MFD
Supply and fixing in replacement of Capacitor 45 plus 6 MFD
Supply and fixing in replacement of Capacitor 50 by 55 plus 5 MFD
Supply and fixing in replacement of Capacitor 50 by 55 plus 5 MFD
Supply and fixing in replacement of Thermostat switch for water cooler by Window AC
Supply and fixing in replacement of Thermostat switch for water cooler by Window AC
Supply and fixing in replacement of Drier stainer filter suitable for AC by Water cooler by Refrigertor
Supply and fixing in replacement of Drier stainer filter suitable for AC by Water cooler by Refrigertor
S and F in replacement of single pole and neutral enclouser with a two pin and earth plug and socket complete with one MCB single pole 20 by 25 Amps
S and F in replacement of single pole and neutral enclouser with a two pin and earth plug and socket complete with one MCB single pole 20 by 25 Amps
S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 6 inches size as per site requirement of approved make all as spd and directed
S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 6 inches size as per site requirement of approved make all as spd and directed
S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 8 inches size as per site requirement of approved make all as spd and directed
S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 8 inches size as per site requirement of approved make all as spd and directed
S and F in replacement of Elastomeric Nitrile Foam Rubber 5 by 8 inches size as per site requirement of approved make all as spd and directed
S and F in replacement of Elastomeric Nitrile Foam Rubber 5 by 8 inches size as per site requirement of approved make all as spd and directed
S and F in replacement of Copper pipe of size 1 by 4 inches of approved make all as spd and directed
S and F in replacement of Copper pipe of size 1 by 4 inches of approved make all as spd and directed
S and F in replacement of Copper pipe of size 1 by 2 inches of approved make all as spd and directed
S and F in replacement of Copper pipe of size 1 by 2 inches of approved make all as spd and directed
S and F in replacement of Copper pipe of size 5 by 8 inches of approved make all as spd and directed
S and F in replacement of Copper pipe of size 5 by 8 inches of approved make all as spd and directed
S and F in replacement of overload relay 1 by 6 or 1 by 8 type of approved make
S and F in replacement of overload relay 1 by 6 or 1 by 8 type of approved make
S and F in replacement of overload relay 4 by 10 type of approved make
S and F in replacement of overload relay 4 by 10 type of approved make
M and L for copper codensing coil for Refrigerator 310 Itrs as per existing makersize all as directed by the Engineer-in-charge
M and L for copper codensing coil for Refrigerator 310 Itrs as per existing makersize all as directed by the Engineer-in-charge
M and L for copper coderising coil for 2 TR by 1.5 TR split type AC as per existing size all as directed by the Engineer-in-charge
M and L for copper coderising coil for 2 TR by 1.5 TR split type AC as per existing size all as directed by the Engineer-in-charge
S and F in replacement of Evaporator unit indoor unit complete suitable for 2 TR Capacity Split type Air Conditioners
S and F in replacement of Evaporator unit indoor unit complete suitable for 2 TR Capacity Split type Air Conditioners
S and F in replacement of Evaporator unit indoor unit complete suitable for 1.5 TR Capacity Split type Air Conditioners
S and F in replacement of Evaporator unit indoor unit complete suitable for 1.5 TR Capacity Split type Air Conditioners
S and F in replacement of Out door unit complete excluding compressor etc. Suitable for 2 TR Capcity Air conditioners
S and F in replacement of Out door unit complete excluding compressor etc. Suitable for 2 TR Capcity Air conditioners
S and F in replacement of Out door unit complete excluding compressor etc Suitable for 1.5 TR Capcity Air conditioners
S and F in replacement of Out door unit complete excluding compressor etc Suitable for 1.5 TR Capcity Air conditioners
Supply and fixing in repair Capillary tube size 50 by 60 Suitable for split by window type AC of capacity 1.5 by 2.0 Ton
Supply and fixing in repair Capillary tube size 50 by 60 Suitable for split by window type AC of capacity 1.5 by 2.0 Ton
Supply and fixing in repair Bracket stand suitable for 2 TR Capacity Split type AC including Fastners, etc
Supply and fixing in repair Bracket stand suitable for 2 TR Capacity Split type AC including Fastners, etc
Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling applinces
Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling applinces charging cost inci in this item
Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler Refrigerator and other cooling applinces
Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler Refrigerator and other cooling applinces incl charging cost incl in this item
Supply and charging Nitrogen Gas for finding out lekage as and when required
Supply and charging Nitrogen Gas for finding out lekage as and when required charging cost incl in this item
S and F in replacement of wall mounted voltage stablizer 4 by 5 kva single phase 230 volt suitable for Acs Complete all as specified and directed
S and F in replacement of wall mounted voltage stablizer 4 by 5 kva single phase 230 volt suitable for Acs Complete all as specified and directed
Taking down old AL by Copper Sub main wing and M AND L for new Sup main winng using to 1 core PVC insulated cable HR and FR 6 sqmm copper conductor multi stranded
and 6.0 sqmim copper conductor insulated cable HR and FR using as earth wire and drawing onto PVC Casing and Caping complete all as specified and directed Note- One run of PVC casing caping 03 run of 6 sq mm PVC copper wire measured as one Unit
Taking down geyser carefully any type, make and capacity 25 by 50 ltrs, dismantling the geyser for inspection, cleaning of tank, repair, repalcement of defective part
and reinstallation of geysers to its original. postion complete all as specified Note Supply only Spare parts such as PCB, sensors, heating element thermostat switch, spacer ring neon lamp, head assembly glass wool, safety plug rubber, gasket. copper cable, top and bottom cover, inspection plate, CP and PVC connection. Plug Top, Outer and Inner shell element holding clamps etc shall be measured & paid for seperately in respective items here in after
Supply only heating element any type ie, Cup,thread or triangular as per existing sample 1.5 KW. 220 by 230 volts ISI marked
Supply only heating element any type ie, Cup,thread or triangular as per existing sample 1.5 KW. 220 by 230 volts ISI marked
Supply only heating element any type ie. Cup,thread or triangular as per existing sample 2.0 KW. 220 by 230 volts ISI marked
Supply only heating element any type ie. Cup,thread or triangular as per existing sample 2.0 KW. 220 by 230 volts ISI marked
Supply only Thermostat switch ISI marked for any type of geyser as per sample
Supply only Thermostat switch ISI marked for any type of geyser as per sample
Supply only Head Assy Brass 8 to 9 holes suitable for 25 Itrs capacity as per sample
Supply only Head Assy Brass 8 to 9 holes suitable for 25 Itrs capacity as per sample
Supply only Head Assy Brass 8 to 9 holes suitable for 50 Itrs capacity as per sample.
Supply only Head Assy Brass 8 to 9 holes suitable for 50 Itrs capacity as per sample.
Supplyonly Safety plug brass ISI marked suitable for any type of geyser of capacity 25 by 50 Itrs geyers
Supplyonly Safety plug brass ISI marked suitable for any type of geyser of capacity 25 by 50 Itrs geyers
Supply only Hot water connection made of brass pipe chromium plated upto 18 inch length complete with rubber washer and brass nuts, ISI marked
Supply only Hot water connection made of brass pipe chromium plated upto 18 inch length complete with rubber washer and brass nuts, ISI marked
Supply only MS outer cover body for storage type water heater of capacity 25 Ltrs all as specified and directed by Engr-in-Charge
Supply only MS outer cover body for storage type water heater of capacity 25 Ltrs all as specified and directed by Engr-in-Charge
Supply only MS outer cover body for storage type water heater of capacity 50 Ltrs all as specified and directed by Engr-in-Charge
Supply only MS outer cover body for storage type water heater of capacity 50 Ltrs all as specified and directed by Engr-in-Charge
Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 25 Itrs capacity all as specified and directed by Engr-in-Charge
Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 25 Itrs capacity all as specified and directed by Engr-in-Charge
Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 50 Itrs capacity all as specified and directed by Engr-in-Charge
Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 50 Itrs capacity all as specified and directed by Engr-in-Charge
S and F in replacement of bottom cover plate in two halves suitable and as per sample complete all as specified and directed by Engr-in-Charge
S and F in replacement of bottom cover plate in two halves suitable and as per sample complete all as specified and directed by Engr-in-Charge
S and F phase indicator red colour circular by rectangular shape as suitable and as per sample complete all as specified and directed by Engr-in-Charge
S and F phase indicator red colour circular by rectangular shape as suitable and as per sample complete all as specified and directed by Engr-in-Charge
S and F in replacement of non return brass valve of 15mm bore. ISI marked as specified and directed by Engr-in-Charge
S and F in replacement of non return brass valve of 15mm bore. ISI marked as specified and directed by Engr-in-Charge
S and F in replacement of plug top 3 Pin 15 Amps 230 volts all as specified and directed by Engr-in-Charge
S and F in replacement of plug top 3 Pin 15 Amps 230 volts all as specified and directed by Engr-in-Charge
S and F in replacement of complete PCB set including sensors, remote, ELCB etc. for smart geyser of any make and any capacity complete all as specified and as directed
S and F in replacement of complete PCB set including sensors, remote, ELCB etc. for smart geyser of any make and any capacity complete all as specified and as directed
Supply only glass wool as per direction by Engr-in-charge
Supply only glass wool as per direction by Engr-in-charge
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | S and F in repair expansion valve required for AC plant of capacity 5.5 TR Complete all as specified and directed by Engr-in-charge | S and F in repair expansion valve required for AC plant of capacity 5.5 TR Complete all as specified and directed by Engr-in-charge | 6 | each | gekkdaf | 180 | |
| 2 | M and L for cleaning of evaporator coils of AC plant of capacity 5.5 TR with dilute HCL by force feed method to remove the dust particle formed on the coil | M and L for cleaning of evaporator coils of AC plant of capacity 5.5 TR with dilute HCL by force feed method to remove the dust particle formed on the coil and fins, cleaning of liquid lines stainer expansion valve | 17 | each | gekkdaf | 180 | |
| 3 | M and L for servicing incl cleaning of condensor, cooling coil, refrigerant coils fins with mild detergent and descaling of condensor coil for Package type 5.5 TR AC | M and L for servicing incl cleaning of condensor, cooling coil, refrigerant coils fins with mild detergent and descaling of condensor coil for Package type 5.5 TR AC of including leake testing with N2 gas any make capacity complete all as specified and directed by Engr-in-Charge | 17 | each | gekkdaf | 180 | |
| 4 | Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 5.5 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC | Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 5.5 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge and testing on load for 24 hrs | 6 | each | gekkdaf | 180 | |
| 5 | Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 11 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC | Disconnecting, dismantling and taking out existing burnt out compressor of package type AC 11 TR Capacity and supply and fixing sealed unit compresser of existing capacity, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge and testing on load for 24 hrs | 2 | each job | gekkdaf | 180 | |
| 6 | M and L for servicing incl cleaning of condensor and evaporator coils fins with mild detergent and descaling of condensor coil for split type AC of any make capacity after taking down the whole unit | M and L for servicing incl cleaning of condensor and evaporator coils fins with mild detergent and descaling of condensor coil for split type AC of any make capacity after taking down the whole unit | 85 | each job | gekkdaf | 180 | |
| 7 | Supply fixing in replacement of V Belt of size A-28, A 32 suitable for 11 by 5.5 TR Capacity package Unit AC all as specified and directed by Engr-in-charge | Supply fixing in replacement of V Belt of size A-28, A 32 suitable for 11 by 5.5 TR Capacity package Unit AC all as specified and directed by Engr-in-charge | 15 | each | gekkdaf | 180 | |
| 8 | S and F micro filter for AC Plant of capacity 5.5 TR complete all as specified and directed by Engr-in-charge | S and F micro filter for AC Plant of capacity 5.5 TR complete all as specified and directed by Engr-in-charge | 14 | each | gekkdaf | 180 | |
| 9 | Taking out blower motor shaft from AC plant of capacity 5.5 TR welding and grinding on lathe to make suitable alignment with bearing then refixed | Taking out blower motor shaft from AC plant of capacity 5.5 TR welding and grinding on lathe to make suitable alignment with bearing then refixed complete all as specified and directed by Eng in charge | 3 | each | gekkdaf | 180 | |
| 10 | S and F in replacement of outdoor fan motor for package AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge | S and F in replacement of outdoor fan motor for package AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge | 7 | each | gekkdaf | 180 | |
| 11 | S and F in repair fan blade of outdoor unit of AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge | S and F in repair fan blade of outdoor unit of AC plant of capacity 5.5 TR complete all as specified and directed by Engg-in-charge | 8 | each | gekkdaf | 180 | |
| 12 | S and F connector for 30-40 AMPS, 440 volts complete all as specified and directed by Engg-in-charge | S and F connector for 30-40 AMPS, 440 volts complete all as specified and directed by Engg-in-charge | 6 | each | gekkdaf | 180 | |
| 13 | S and F Auto change over switch for package type AC plant 11 TR complete all as specified and directed by Engg-in-charge | S and F Auto change over switch for package type AC plant 11 TR complete all as specified and directed by Engg-in-charge | 2 | each | gekkdaf | 180 | |
| 14 | S and F Auto change over switch for package type AC plant 16.5 TR complete all as specified and directed by Engg-in-charge | S and F Auto change over switch for package type AC plant 16.5 TR complete all as specified and directed by Engg-in-charge | 1 | each | gekkdaf | 180 | |
| 15 | Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling appliances | Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling appliances ,charging cost incl in this item | 180 | kg | gekkdaf | 180 | |
| 16 | Supply and charging R-407 gas to maintain the required cooling effect as and when required in the package type AC other cooling appliances | Supply and charging R-407 gas to maintain the required cooling effect as and when required in the package type AC other cooling appliances charging cost incl in this item | 75 | kg | gekkdaf | 180 | |
| 17 | S and F in replacement of insulation Nitrile rubber 1 by 6 size including fixing | S and F in replacement of insulation Nitrile rubber 1 by 6 size including fixing | 60 | rm | gekkdaf | 180 | |
| 18 | S and F in replacement of insulation Nitrile rubber 1 by 8 inch size including fixing | S and F in replacement of insulation Nitrile rubber 1 by 8 inch size including fixing | 60 | rm | gekkdaf | 180 | |
| 19 | S and F in replacement of insulation Nitrile rubber 5 by 8 inch size including fixing | S and F in replacement of insulation Nitrile rubber 5 by 8 inch size including fixing | 60 | rm | gekkdaf | 180 | |
| 20 | S and F in replacement of Copper pipe of size 1 by 4 size including fixing | S and F in replacement of Copper pipe of size 1 by 4 size including fixing | 50 | rm | gekkdaf | 180 | |
| 21 | S and F in replacement of Copper pipe of size 1 by 2 size including fixing | S and F in replacement of Copper pipe of size 1 by 2 size including fixing | 50 | rm | gekkdaf | 180 | |
| 22 | S and F in replacement of Copper pipe of size 5 by 8 size including fixing | S and F in replacement of Copper pipe of size 5 by 8 size including fixing | 50 | rm | gekkdaf | 180 | |
| 23 | Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler. Refrigerator and other cooling appliances complete all as specified and directed | Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler. Refrigerator and other cooling appliances complete all as specified and directed | 8 | kgs | gekkdaf | 180 | |
| 24 | Supply and charging Nitrogen gas for finding out leakage as and when required as specified and directed by Engr in charge | Supply and charging Nitrogen gas for finding out leakage as and when required as specified and directed by Engr in charge | 10 | kgs | gekkdaf | 180 | |
| 25 | S and F in replacement of Printed Circuit Board with CT coil complete suitable for 16.5 TR capacity Package type AC Plant. | S and F in replacement of Printed Circuit Board with CT coil complete suitable for 16.5 TR capacity Package type AC Plant. | 1 | each | gekkdaf | 180 | |
| 26 | S and F in replacement of Printed Circuit Board with CT coil complete suitable for 11 TR capacity Package type AC Plant. | S and F in replacement of Printed Circuit Board with CT coil complete suitable for 11 TR capacity Package type AC Plant. | 2 | each | gekkdaf | 180 | |
| 27 | Supply and fixing in replacement of Capacitor 36 MFD complete all as specified by Engr- in- Charge | Supply and fixing in replacement of Capacitor 36 MFD complete all as specified by Engr- in- Charge | 6 | each | gekkdaf | 180 | |
| 28 | Supply and fixing in replacement of Capacitor 45 MFD complete all as specified by Engr- in- Charge. | Supply and fixing in replacement of Capacitor 45 MFD complete all as specified by Engr- in- Charge. | 26 | each | gekkdaf | 180 | |
| 29 | Supply and fixing in replacement of Capacitor 50 plus 6 MFD complete all as specified by Engr- in- Charge. | Supply and fixing in replacement of Capacitor 50 plus 6 MFD complete all as specified by Engr- in- Charge. | 40 | each | gekkdaf | 180 | |
| 30 | Supply and fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote, etc. | Supply and fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote, etc. | 25 | each job | gekkdaf | 180 | |
| 31 | Supply and fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote, etc. | Supply and fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote, etc. | 5 | each job | gekkdaf | 180 | |
| 32 | Disconnecting, dismantling and taking out existing burnt out compressor from window by Split type Air conditioner 2 TR Capacity | and supply and fixing sealed unit compressor of existing capacity 2 TR, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge. | 15 | each job | gekkdaf | 180 | |
| 33 | Disconnecting, dismantling and taking out existing burnt out compressor from window by Split type Air conditioner 1.5 TR Capacity | and supply and fixing sealed unit compressor of existing capacity 1.5 TR, single phase, 230 V AC supply initially filled with compressor gas as specified by Engr-in-charge. | 3 | each job | gekkdaf | 180 | |
| 34 | Shifting of split type AC from MES yard existing location to the new location by taking it out after filling the opening of old location with cement mortar | applying white wash on wall with matching with existing colour of the site and making opening holes on brick wall at new location and gap well finished with cement mortar, applying white wash, colour wash, distemper etc on wall to match with existing colour of the adjacent surface , installation and commissioning with replacement of insulation of suction and discharge line. | 8 | each job | gekkdaf | 180 | |
| 35 | Shifting of window type AC from MES yard by existing location to the site new location where directed and installation by making necessary | opening of brick wall by window and preparing gap well finished by cement mortar applying white washing in matching with the existing colour, disposal of waste material by filling gap with plywood on front side of AC and outer corner of plywood applying two coats of enamelled paint over a coat of primer on plywood surface to match the existing location all as directed by the Engr-in-Charge. | 1 | each job | gekkdaf | 180 | |
| 36 | Repair by Mantance for split Acs 1.5 by 2.0 Ton of any make any type installed at various location by carrying necessary repairs cleaning filters | adjustment of asemblies sub-assymbles check the level of refrigerant arresting the leakege of any type replacement of parts calibration including cleaning of condenser and evaporator fins with mild detergent and desclaing of condenser coil for split acs complete all as specified here in after and as specified in particular specification. | 85 | each job | gekkdaf | 180 | |
| 37 | Repair by Mantance for Window Acs 1.5 by 2.0 Ton of any make any type installed at various location by carrying necessary repairs cleaning filters adjustment | of asemblies sub-assymbles check the level of refrigerant arresting the leakege of any type replacement of parts calibration including cleaning of condenser and evaporator fins with mild detergent and desclaing of condenser coil for split acs complete all as specified here in after and as specified in particular specification. | 7 | each job | gekkdaf | 180 | |
| 38 | Shifting of split type AC from MES yard existing location to the new location, filling the opening of old location with cement mortor, applying white wash on wall with existing colour | of the site and making opening holes on brick wall at new location well finish with cement mortor, applying white wash distemper etc on wall to match with existing colour of the adjacent surface commissioning with replacement of insulation of suction discharge line complete installation | 10 | each job | gekkdaf | 180 | |
| 39 | Shifting of window type AC from MES yard existing location to the site by new location where directed and installation by making necessary opening of brick wall window | and preparing gap well finished by cement mortor applying white washing in matching with the existing colour, disposal of waste material/filling gap with ply wood on front side of AC and outer corner of ply wood applying two coats of enamelled paint tiver a coat of primer on plywood surface to match the existing location all as directed by the Engr-in Charge | 1 | each job | gekkdaf | 180 | |
| 40 | Shifting of water cooler by refrigerator electric driven single phase having any make and capacity from MES | and existing location by taking after disconnection of electric and water line and refixi the same in any u.her new location incl water and electric reconnection complete all as specified and as directed | 2 | each job | gekkdaf | 180 | |
| 41 | Supply fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge | Supply fixing in replacement of Printed Circuit Board suitable for 2TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge | 18 | each job | gekkdaf | 180 | |
| 42 | Supply fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge | Supply fixing in replacement of Printed Circuit Board suitable for 1.5 TR Capacity Split Unit Air Conditioners including remote suitable for existing type etc all as directed by Engr in charge | 6 | each job | gekkdaf | 180 | |
| 43 | Disconnecting, dismantling and taking out existing burnt out compressor from window Split type Air conditioner 2 TR Capacity and supply and fixing sealed unit compressor of existing capacity 2 TR | single phase. 230 V AC supply initialy filled with compressor oil as speciifed by Engr-in-charge | 18 | each job | gekkdaf | 180 | |
| 44 | Disconnecting, dismantling and taking out existing burnt out compressor from window Split type Air conditioner 1.5 TR Capacity and supply and fixing sealed unit compressor of existing capacity 1.5 TR | single phase. 230 V AC supply initialy filled with compressor oil as speciifed by Engr-in-charge | 3 | each job | gekkdaf | 180 | |
| 45 | Disconnecting, dismantling and taking out existing burnt out compressor from water cooler of 40-60 Ltr per Hour and supply and fixing sealed unit of existing cap 40-60 Ltr per Hour compressor | Disconnecting, dismantling and taking out existing burnt out compressor from water cooler of capacity 40 to 60 Ltr per Hour and supply and fixing sealed unit of existing cap 40 to 60 Ltr per Hour compressorsingle phase 230 volts supply | 1 | each job | gekkdaf | 180 | |
| 46 | Disconnecting, dismantling taking out existing burnt out compressor from water cooler of 80-100 Ltr per Hour and supply and fixing sealed unit of existing cap 80-100L ompressor 1 phase 230v | Disconnecting, dismantling and taking out existing burnt out compressor from water cooler of capacity 80 to 100 Ltr per Hour and supply and fixing sealed unit of existing cap 80 to 100 Ltr per Hour compressorsingle phase 230 volts supply | 1 | each job | gekkdaf | 180 | |
| 47 | Disconnecting, dismantling taking out existing burnt out compressor from domestic type refrigerator Cap 286 Ltr S and F hematically sealed compressor unit of existing Make and model | Disconnecting, dismantling and taking out existing burnt out compressor from domestic type refrigerator Cap 286 Ltr S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas &testing on load on 24 hrs for smooth functioning. | 2 | each job | gekkdaf | 180 | |
| 48 | Disconnecting, dismantling and taking out existing burnt out compressor from domestic type refrigerator Cap 300 by 310 Ltr S and F hematically sealed compressor unit of existing Make and model | Disconnecting, dismantling and taking out existing burnt out compressor from domestic type refrigerator Cap 300 by 310 Ltr S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas and testing on load on 24 hrs for smooth functioning. | 2 | each | gekkdaf | 180 | |
| 49 | Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 300 ltrs S and F hematically sealed compressor unit of existing Make and model | Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 300 ltrs S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas and testing on load on 24 hrs for smooth functioning. | 1 | each | gekkdaf | 180 | |
| 50 | Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 500 ltrs S and F hematically sealed compressor unit of existing Make and model | Disconnecting, dismantling and taking out existing burnt out compressor from domestic type deep freezer of cap 500 ltrs S and F hematically sealed compressor unit of existing Make and model including initial charging of sealed compressor with refrigerant gas and testing on load on 24 hrs for smooth functioning. | 1 | each | gekkdaf | 180 | |
| 51 | Supply and fix indoor PCB board suitable for the inverter type AC 1.5 by 2 0 Ton AC all as specified and as directed | Supply and fix indoor PCB board suitable for the inverter type AC 1.5 by 2 0 Ton AC all as specified and as directed | 5 | each | gekkdaf | 180 | |
| 52 | Supply and fix outdoor PCB board suitatile for the inverter type AC 1.5 by 2.0 Ton AC all as specified and as directed | Supply and fix outdoor PCB board suitatile for the inverter type AC 1.5 by 2.0 Ton AC all as specified and as directed | 5 | each | gekkdaf | 180 | |
| 53 | Supply and fixing in replacement of AC blower by outdoor fan motor for AC suitable for 2 TR AC suitable for operation on 230 Volt AC supply at 50 HZ | Supply and fixing in replacement of AC blower by outdoor fan motor for AC suitable for 2 TR AC suitable for operation on 230 Volt AC supply at 50 HZ | 30 | each | gekkdaf | 180 | |
| 54 | Supply and fix indoor PCB board suitable for 1.5 TR AC Window tepe AC suitable operate on 230 Volt AC supply at 50 HZ | Supply and fix indoor PCB board suitable for 1.5 TR AC Window tepe AC suitable operate on 230 Volt AC supply at 50 HZ | 5 | each | gekkdaf | 180 | |
| 55 | Supply and fix indoor PCB board suitable for water cooler of Cap 40 by 80 Ltrs | Supply and fix indoor PCB board suitable for water cooler of Cap 40 by 80 Ltrs | 3 | each | gekkdaf | 180 | |
| 56 | Supply and fix indoor PCB board suitable for water cooler of Cap 150 Ltrs | Supply and fix indoor PCB board suitable for water cooler of Cap 150 Ltrs | 1 | each | gekkdaf | 180 | |
| 57 | Supply and fixing in replacement of Capacitor 4 MFD | Supply and fixing in replacement of Capacitor 4 MFD | 15 | each | gekkdaf | 180 | |
| 58 | Supply and fixing in replacement of Capacitor 45 plus 6 MFD | Supply and fixing in replacement of Capacitor 45 plus 6 MFD | 20 | each | gekkdaf | 180 | |
| 59 | Supply and fixing in replacement of Capacitor 50 by 55 plus 5 MFD | Supply and fixing in replacement of Capacitor 50 by 55 plus 5 MFD | 50 | each | gekkdaf | 180 | |
| 60 | Supply and fixing in replacement of Thermostat switch for water cooler by Window AC | Supply and fixing in replacement of Thermostat switch for water cooler by Window AC | 15 | each | gekkdaf | 180 | |
| 61 | Supply and fixing in replacement of Drier stainer filter suitable for AC by Water cooler by Refrigertor | Supply and fixing in replacement of Drier stainer filter suitable for AC by Water cooler by Refrigertor | 5 | each | gekkdaf | 180 | |
| 62 | S and F in replacement of single pole and neutral enclouser with a two pin and earth plug and socket complete with one MCB single pole 20 by 25 Amps | S and F in replacement of single pole and neutral enclouser with a two pin and earth plug and socket complete with one MCB single pole 20 by 25 Amps | 5 | each | gekkdaf | 180 | |
| 63 | S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 6 inches size as per site requirement of approved make all as spd and directed | S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 6 inches size as per site requirement of approved make all as spd and directed | 80 | rm | gekkdaf | 180 | |
| 64 | S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 8 inches size as per site requirement of approved make all as spd and directed | S and F in replacement of Elastomeric Nitrile Foam Rubber 1 by 8 inches size as per site requirement of approved make all as spd and directed | 60 | rm | gekkdaf | 180 | |
| 65 | S and F in replacement of Elastomeric Nitrile Foam Rubber 5 by 8 inches size as per site requirement of approved make all as spd and directed | S and F in replacement of Elastomeric Nitrile Foam Rubber 5 by 8 inches size as per site requirement of approved make all as spd and directed | 50 | rm | gekkdaf | 180 | |
| 66 | S and F in replacement of Copper pipe of size 1 by 4 inches of approved make all as spd and directed | S and F in replacement of Copper pipe of size 1 by 4 inches of approved make all as spd and directed | 80 | rm | gekkdaf | 180 | |
| 67 | S and F in replacement of Copper pipe of size 1 by 2 inches of approved make all as spd and directed | S and F in replacement of Copper pipe of size 1 by 2 inches of approved make all as spd and directed | 60 | rm | gekkdaf | 180 | |
| 68 | S and F in replacement of Copper pipe of size 5 by 8 inches of approved make all as spd and directed | S and F in replacement of Copper pipe of size 5 by 8 inches of approved make all as spd and directed | 50 | rm | gekkdaf | 180 | |
| 69 | S and F in replacement of overload relay 1 by 6 or 1 by 8 type of approved make | S and F in replacement of overload relay 1 by 6 or 1 by 8 type of approved make | 10 | each | gekkdaf | 180 | |
| 70 | S and F in replacement of overload relay 4 by 10 type of approved make | S and F in replacement of overload relay 4 by 10 type of approved make | 8 | each | gekkdaf | 180 | |
| 71 | M and L for copper codensing coil for Refrigerator 310 Itrs as per existing makersize all as directed by the Engineer-in-charge | M and L for copper codensing coil for Refrigerator 310 Itrs as per existing makersize all as directed by the Engineer-in-charge | 1 | each job | gekkdaf | 180 | |
| 72 | M and L for copper coderising coil for 2 TR by 1.5 TR split type AC as per existing size all as directed by the Engineer-in-charge | M and L for copper coderising coil for 2 TR by 1.5 TR split type AC as per existing size all as directed by the Engineer-in-charge | 7 | each job | gekkdaf | 180 | |
| 73 | S and F in replacement of Evaporator unit indoor unit complete suitable for 2 TR Capacity Split type Air Conditioners | S and F in replacement of Evaporator unit indoor unit complete suitable for 2 TR Capacity Split type Air Conditioners | 6 | each | gekkdaf | 180 | |
| 74 | S and F in replacement of Evaporator unit indoor unit complete suitable for 1.5 TR Capacity Split type Air Conditioners | S and F in replacement of Evaporator unit indoor unit complete suitable for 1.5 TR Capacity Split type Air Conditioners | 2 | each | gekkdaf | 180 | |
| 75 | S and F in replacement of Out door unit complete excluding compressor etc. Suitable for 2 TR Capcity Air conditioners | S and F in replacement of Out door unit complete excluding compressor etc. Suitable for 2 TR Capcity Air conditioners | 6 | each | gekkdaf | 180 | |
| 76 | S and F in replacement of Out door unit complete excluding compressor etc Suitable for 1.5 TR Capcity Air conditioners | S and F in replacement of Out door unit complete excluding compressor etc Suitable for 1.5 TR Capcity Air conditioners | 2 | each | gekkdaf | 180 | |
| 77 | Supply and fixing in repair Capillary tube size 50 by 60 Suitable for split by window type AC of capacity 1.5 by 2.0 Ton | Supply and fixing in repair Capillary tube size 50 by 60 Suitable for split by window type AC of capacity 1.5 by 2.0 Ton | 15 | rm | gekkdaf | 180 | |
| 78 | Supply and fixing in repair Bracket stand suitable for 2 TR Capacity Split type AC including Fastners, etc | Supply and fixing in repair Bracket stand suitable for 2 TR Capacity Split type AC including Fastners, etc | 15 | each set | gekkdaf | 180 | |
| 79 | Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling applinces | Supply and charging R-22 gas to maintain the required cooling effect as and when required in the split AC by window type AC and other cooling applinces charging cost inci in this item | 190 | kgs | gekkdaf | 180 | |
| 80 | Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler Refrigerator and other cooling applinces | Supply and charging R-134 gas to maintain the required cooling effect as and when required in the water cooler Refrigerator and other cooling applinces incl charging cost incl in this item | 15 | kgs | gekkdaf | 180 | |
| 81 | Supply and charging Nitrogen Gas for finding out lekage as and when required | Supply and charging Nitrogen Gas for finding out lekage as and when required charging cost incl in this item | 12 | kgs | gekkdaf | 180 | |
| 82 | S and F in replacement of wall mounted voltage stablizer 4 by 5 kva single phase 230 volt suitable for Acs Complete all as specified and directed | S and F in replacement of wall mounted voltage stablizer 4 by 5 kva single phase 230 volt suitable for Acs Complete all as specified and directed | 15 | each | gekkdaf | 180 | |
| 83 | Taking down old AL by Copper Sub main wing and M AND L for new Sup main winng using to 1 core PVC insulated cable HR and FR 6 sqmm copper conductor multi stranded | and 6.0 sqmim copper conductor insulated cable HR and FR using as earth wire and drawing onto PVC Casing and Caping complete all as specified and directed Note- One run of PVC casing caping 03 run of 6 sq mm PVC copper wire measured as one Unit | 150 | rm | gekkdaf | 180 | |
| 84 | Taking down geyser carefully any type, make and capacity 25 by 50 ltrs, dismantling the geyser for inspection, cleaning of tank, repair, repalcement of defective part | and reinstallation of geysers to its original. postion complete all as specified Note Supply only Spare parts such as PCB, sensors, heating element thermostat switch, spacer ring neon lamp, head assembly glass wool, safety plug rubber, gasket. copper cable, top and bottom cover, inspection plate, CP and PVC connection. Plug Top, Outer and Inner shell element holding clamps etc shall be measured & paid for seperately in respective items here in after | 89 | each job | gekkdaf | 180 | |
| 85 | Supply only heating element any type ie, Cup,thread or triangular as per existing sample 1.5 KW. 220 by 230 volts ISI marked | Supply only heating element any type ie, Cup,thread or triangular as per existing sample 1.5 KW. 220 by 230 volts ISI marked | 36 | each | gekkdaf | 180 | |
| 86 | Supply only heating element any type ie. Cup,thread or triangular as per existing sample 2.0 KW. 220 by 230 volts ISI marked | Supply only heating element any type ie. Cup,thread or triangular as per existing sample 2.0 KW. 220 by 230 volts ISI marked | 28 | each | gekkdaf | 180 | |
| 87 | Supply only Thermostat switch ISI marked for any type of geyser as per sample | Supply only Thermostat switch ISI marked for any type of geyser as per sample | 35 | each | gekkdaf | 180 | |
| 88 | Supply only Head Assy Brass 8 to 9 holes suitable for 25 Itrs capacity as per sample | Supply only Head Assy Brass 8 to 9 holes suitable for 25 Itrs capacity as per sample | 8 | each | gekkdaf | 180 | |
| 89 | Supply only Head Assy Brass 8 to 9 holes suitable for 50 Itrs capacity as per sample. | Supply only Head Assy Brass 8 to 9 holes suitable for 50 Itrs capacity as per sample. | 5 | each | gekkdaf | 180 | |
| 90 | Supplyonly Safety plug brass ISI marked suitable for any type of geyser of capacity 25 by 50 Itrs geyers | Supplyonly Safety plug brass ISI marked suitable for any type of geyser of capacity 25 by 50 Itrs geyers | 15 | each | gekkdaf | 180 | |
| 91 | Supply only Hot water connection made of brass pipe chromium plated upto 18 inch length complete with rubber washer and brass nuts, ISI marked | Supply only Hot water connection made of brass pipe chromium plated upto 18 inch length complete with rubber washer and brass nuts, ISI marked | 25 | each | gekkdaf | 180 | |
| 92 | Supply only MS outer cover body for storage type water heater of capacity 25 Ltrs all as specified and directed by Engr-in-Charge | Supply only MS outer cover body for storage type water heater of capacity 25 Ltrs all as specified and directed by Engr-in-Charge | 2 | each | gekkdaf | 180 | |
| 93 | Supply only MS outer cover body for storage type water heater of capacity 50 Ltrs all as specified and directed by Engr-in-Charge | Supply only MS outer cover body for storage type water heater of capacity 50 Ltrs all as specified and directed by Engr-in-Charge | 1 | each | gekkdaf | 180 | |
| 94 | Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 25 Itrs capacity all as specified and directed by Engr-in-Charge | Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 25 Itrs capacity all as specified and directed by Engr-in-Charge | 1 | each | gekkdaf | 180 | |
| 95 | Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 50 Itrs capacity all as specified and directed by Engr-in-Charge | Supply only geyser inner assembly of brass with inlet by outlet and over flow provision rubber washer suitable for 50 Itrs capacity all as specified and directed by Engr-in-Charge | 1 | each | gekkdaf | 180 | |
| 96 | S and F in replacement of bottom cover plate in two halves suitable and as per sample complete all as specified and directed by Engr-in-Charge | S and F in replacement of bottom cover plate in two halves suitable and as per sample complete all as specified and directed by Engr-in-Charge | 12 | each | gekkdaf | 180 | |
| 97 | S and F phase indicator red colour circular by rectangular shape as suitable and as per sample complete all as specified and directed by Engr-in-Charge | S and F phase indicator red colour circular by rectangular shape as suitable and as per sample complete all as specified and directed by Engr-in-Charge | 15 | each | gekkdaf | 180 | |
| 98 | S and F in replacement of non return brass valve of 15mm bore. ISI marked as specified and directed by Engr-in-Charge | S and F in replacement of non return brass valve of 15mm bore. ISI marked as specified and directed by Engr-in-Charge | 18 | each | gekkdaf | 180 | |
| 99 | S and F in replacement of plug top 3 Pin 15 Amps 230 volts all as specified and directed by Engr-in-Charge | S and F in replacement of plug top 3 Pin 15 Amps 230 volts all as specified and directed by Engr-in-Charge | 20 | each | gekkdaf | 180 | |
| 100 | S and F in replacement of complete PCB set including sensors, remote, ELCB etc. for smart geyser of any make and any capacity complete all as specified and as directed | S and F in replacement of complete PCB set including sensors, remote, ELCB etc. for smart geyser of any make and any capacity complete all as specified and as directed | 24 | each | gekkdaf | 180 | |
| 101 | Supply only glass wool as per direction by Engr-in-charge | Supply only glass wool as per direction by Engr-in-charge | 5 | kgs | gekkdaf | 180 |
Categories
189
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
GST certificate
PAN card
Experience certificates
Audited financial statements or CA/Cost Accountant turnover certificate for last 3 years
ISO 9001 certification (Bidder or OEM)
Cancelled cheque
EFT mandate duly certified by bank
Bid document certificates and any ATC/Corrigendum
OEM authorization (if applicable)
Technical Specifications
1 Item
Item #1 Details
View Catalog| Category | Specification | Requirement |
|---|---|---|
| GENERIC | Category of Cable | FR |
| GENERIC | Conductor Material | Annealed Bare copper |
| GENERIC | Form of Conductor | Stranded (Class 2) |
| GENERIC | Nominal Cross Sectional Area of Conductor (in Sq mm) | 6.0 |
| GENERIC | Type of Insulation | Type C (HR) |
| GENERIC | Number of Core | 3 Core |
| GENERIC | Sheath Type | Type ST2 (HR) |
Frequently Asked Questions
How to bid for Indian Army cable procurement in 2026 with ISO 9001 compliance?
Bidders must meet ISO 9001 certification requirements, provide PAN and GSTIN, cancelled cheque, and EFT mandate. Include turnover evidence for last three years and OEM authorization if applicable. Ensure compliance with option clause allowing up to 50% quantity adjustment and document delivery terms per ATC.
What documents are required for the Indian Army cable bid submission in 2026?
Submit PAN card, GSTIN, cancelled cheque, EFT mandate, audited turnover or CA/Cost Accountant certificate, ISO 9001 certificate (bidder or OEM), and any OEM authorizations. Also include bid document certificates and any corrigenda. Ensure all documents align with the Buyer Added Terms.
What are the technical cable specifications for this tender in 2026?
The tender specifies generic cable attributes: Category of Cable, Conductor Material, Form of Conductor, Nominal Cross Sectional Area (Sq mm), Type of Insulation, Number of Core, and Sheath Type. Exact values depend on itemized BOQ details; emphasis on standard compliance and quality control.
When is the delivery period and how is it extended for quantity increases?
Delivery starts after the original order date; if quantity increases by up to 50%, extended time is calculated as (Increased quantity ÷ Original quantity) × Original delivery period, with a minimum extension of 30 days. If original period is shorter than 30 days, use the original period.
What is the required turnover criteria for bidders and OEMs for this cable tender?
Bidder and OEM turnover must meet the minimum average annual financial turnover stated in the bid document, based on the last three financial years ending March 31 of the previous year. Provide audited balance sheets or CA/Cost Accountant certificates; for new entities, turnover is calculated from completed years post-constitution.
What is the role of the option clause in supplier selection for this tender?
The option clause allows the purchaser to vary the ordered quantity by up to 50% during the contract and currency. Suppliers must be prepared to scale production, adjust delivery plans, and price adjustments at contracted rates, maintaining adherence to delivery and quality terms.
What certifications are mandatory for the offered cables in this bid?
The bid requires ISO 9001 certification for the bidder or the OEM. Documentation proving certification and the ability to supply compliant cables is essential, along with standard quality documentation and any relevant product conformity statements.
How should manufacturers demonstrate OEM authorizations in this tender?
If the bidder is not the OEM, submit official OEM authorization letters, along with evidence of the OEM’s ISO 9001 status and ability to supply the specified cable categories. Include product conformity and delivery capability details for the Indian Army’s needs.