Government Tender Published for Non Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2),Non Modular Piano Type Do in AHMEDNAGAR, MAHARASHTRA
Bid Publish Date
01-Oct-2026, 4:30 pm
Bid End Date
19-Oct-2026, 5:00 pm
EMD
₹33,000
Value
₹11,30,742
Location
Progress
Indian Army invites bids for Non Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2) (Q3), Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854 (Q2), Plasticized PVC Tapes with Non-Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS 7809 (Part 3/ Sec1) (Q2), Elecric Bells and Accessories as per IS 2268 (Q3), PVC Insulated Unsheathed Cable with Flexible Conductor ISI Marked To IS 694 (Q2), ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996, ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996, ANGLE HOLDER POLYCARBONATE WITH METAL RING, BRASS COAT HOOK, BUTT HINGES 100 MM SS 202 GRADE STEEL, BUTT HINGES 75 MM SS 202 GRADE STEEL, CANE PLASTIC HALF ROUND 2MM WIDE, CANE PLASTIC HALF ROUND 4MM WIDE, DOOR STOPPER DOUBLE LEG SS 100MM, DOOR STOPPER SINGLE LEG SS 125MM, ELECTRIC CEILING ROSE JUMBO 2 PLATE, FEVICOL, HANDLE CP FOR STEEL ALMIRAH, HANDREST FOR CHAIR CB STEEL WITH ARMS FD 75M, HIGH PRESSURE HDPE FLOAT VALVE 15MM, HIGH PRESSURE HDPE FLOAT VALVE 20MM, HIGH PRESSURE HDPE FLOAT VALVE 25MM, LOCKING SYSTEM FOR STEEL ALMIRAH, M SEAL, ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD, PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX12MM, PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX19MM, PVC CAPING CASING 25MM WIDE 6. 5 FT LONG, PVC SEAT AND BACK FOR CHAIR VERANDAH, PVC SEAT CHAIR DINING, PVC SHOE FOR CHAIR VERANDAH, PVC SHOE FOR CHAIR WOODEN, PVC SHOE FOR TABLE BEDSIDE MAP, SEAT AND BACK FOR CHAIR CB STEEL WITH ARM, SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM, SWITCH SOCKET COMBINATION 2 HOLES 06 AMP, NON MODULAR, SWITCH SOCKET COMBINATION 2 HOLES 16 AMP, NON MODULAR, TELESCOPIC CHANNEL 12 INCH LONG, TOUCH WOOD POLISH FOR WOOD, WHITE CEMENT, WIREMESH STAINLESS STEEL GRADE SS 304, WOVEN FROM 0. 56 MM DIA STAINLESS STEEL WIRE, GI WIREMESH 0. 40MM DIA WIRE ROLL SIZE 15MTRX. 90 MTR in AHMEDNAGAR, MAHARASHTRA. Quantity: 2928. Submission Deadline: 19-10-2026 17: 00: 00. Submit your proposal before the deadline.
Tender Data
Bid Details
Quantity
2928
Category
Non Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2)
Bid Type
Two Packet Bid
Bid Validity
90 (Days)
Bid Type
Service
Evaluation
Total value wise evaluation
Inspection Required
No
RA Qualification Rule
50% Lowest Priced Technically Qualified Bidders
Tech Clarification Time
2 Days
Preference & Exemptions
EMD Required
Yes
MSE Purchase Preference
Yes
MSE Preference Band
L1+15%
MSE Exemption/Relaxation
Yes
Startup Exemption/Relaxation
No
Bid Splitting Applied
No
Requirements
Past Performance
50 %
Warranty Period
5 years
Experience Required
3 Year (s)
Arbitration Clause
No
Mediation Clause
No
Additional Tender Data
Commercial Details
Tender Category
Goods
Bid To RA
No
Bid To RA Enabled
Yes
Item Category
Non Modular Piano Type Domestic Fan Regulator Conforming To IS 11037 (V2) (Q3) , Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854 (Q2) , Plasticized PVC Tapes with Non-Thermosetting Adhesive for electrical purpose (V2) ISI marked to IS 7809 (Part 3/ Sec1) (Q2) , Elecric Bells and Accessories as per IS 2268 (Q3) , PVC Insulated Unsheathed Cable with Flexible Conductor ISI Marked To IS 694 (Q2) , ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996 , ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996 , ANGLE HOLDER POLYCARBONATE WITH METAL RING , BRASS COAT HOOK , BUTT HINGES 100 MM SS 202 GRADE STEEL , BUTT HINGES 75 MM SS 202 GRADE STEEL , CANE PLASTIC HALF ROUND 2MM WIDE , CANE PLASTIC HALF ROUND 4MM WIDE , DOOR STOPPER DOUBLE LEG SS 100MM , DOOR STOPPER SINGLE LEG SS 125MM , ELECTRIC CEILING ROSE JUMBO 2 PLATE , FEVICOL , HANDLE CP FOR STEEL ALMIRAH , HANDREST FOR CHAIR CB STEEL WITH ARMS FD 75M , HIGH PRESSURE HDPE FLOAT VALVE 15MM , HIGH PRESSURE HDPE FLOAT VALVE 20MM , HIGH PRESSURE HDPE FLOAT VALVE 25MM , LOCKING SYSTEM FOR STEEL ALMIRAH , M SEAL , ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD , PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX12MM , PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX19MM , PVC CAPING CASING 25MM WIDE 6.5 FT LONG , PVC SEAT AND BACK FOR CHAIR VERANDAH , PVC SEAT CHAIR DINING , PVC SHOE FOR CHAIR VERANDAH , PVC SHOE FOR CHAIR WOODEN , PVC SHOE FOR TABLE BEDSIDE MAP , SEAT AND BACK FOR CHAIR CB STEEL WITH ARM , SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM , SWITCH SOCKET COMBINATION 2 HOLES 06 AMP,NON MODULAR , SWITCH SOCKET COMBINATION 2 HOLES 16 AMP,NON MODULAR , TELESCOPIC CHANNEL 12 INCH LONG , TOUCH WOOD POLISH FOR WOOD , WHITE CEMENT , WIREMESH STAINLESS STEEL GRADE SS 304, WOVEN FROM 0.56 MM DIA STAINLESS STEEL WIRE , GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR
Advisory Bank
State Bank of India
ePBG Percentage
3%
ePBG Duration (Months)
2
Delivery Details
Max Delivery Days
30
Delivery Locations
1
Delivery Cities
Ahmednagar
Delivery Locations
| Consignee | Address | City | State | Pincode | Quantity | Delivery Days | Additional Requirement |
|---|---|---|---|---|---|---|---|
| - | Ahmednagar | Ahmednagar | - | - | 114 | 30 | - |
Authority Records
BID & GeM Expert Consultancy
End-to-end support — bid preparation, GeM registration, document filing & compliance by industry experts.
Free consultation · 24h response
Documents 4
GeM-Bidding-9881164.pdf
Main Document
BOQ Document
BOQ
BOQ Document
BOQ
GEM General Terms and Conditions Document
GEM_GENERAL_TERMS_AND_CONDITIONS
Corrigendum Updates
2 Updates Update
Extended Deadline
19-Oct-2026, 11:30 am
Opening Date
20-Oct-2026, 11:30 am
Update
Extended Deadline
15-Oct-2026, 11:30 am
Opening Date
16-Oct-2026, 11:30 am
Bill of Quantities (BOQ)
37 Items Sign in to view GEM price trends Sign in for GEM prices
ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996
ALDROP BOLT ALUMINIUM 250MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996
ALDROP BOLT ALUMINIUM 300MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
ANGLE HOLDER POLYCARBONATE WITH METAL RING
THE ANGLE HOLDER SHALL BE OF POLYCARBONATE WITH METAL RING FOR B22 BULB MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC
BRASS COAT HOOK
BRASS COAT HOOK SHALL BE OF S TYPE MAKE - PRAYAG, CORONET, HARRISON, LINK, AND EBCO.
BUTT HINGES 100 MM SS 202 GRADE STEEL
STAINLESS STEEL BUTT HINGE OF SS 202 GRADE 100MM LONG ,MAKE- PRAYAG,CLASSIC,GLOBAL,HARRISON,LINK
BUTT HINGES 75 MM SS 202 GRADE STEEL
STAINLESS STEEL BUTT HINGE OF SS 202 GRADE 75MM LONG ,MAKE- PRAYAG,CLASSIC,GLOBAL,HARRISON,LINK
CANE PLASTIC HALF ROUND 2MM WIDE
PLASTIC CANE SHALL BE HALF ROUND GOLA TYPE 4MM THICK MADE OF VIRGIN PLASTIC
CANE PLASTIC HALF ROUND 4MM WIDE
PLASTIC CANE SHALL BE HALF ROUND GOLA TYPE 4MM THICK MADE OF VIRGIN PLASTIC
DOOR STOPPER DOUBLE LEG SS 100MM
DOOR STOPPER DOUBLE LEG SS 100MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA
DOOR STOPPER SINGLE LEG SS 125MM
DOOR STOPPER SINGLE LEG SS 125MM MAKE - CROWN,CLASSIC,GLOBAL ,HINDALCO,VEDANTA
ELECTRIC CEILING ROSE JUMBO 2 PLATE
ELECTRIC CEILING ROSE SHALL BE 2 PLATES JUMBO TYPE MADE OF POLYCARBONATE MATERAIL .MAKE-ANCHOR,KINJAL,HAVELLS,LEGRAND,PANASONIC
FEVICOL
FEVICOL SHALL BE OF SH GRADE ,MAKE-PIDILITE,WOODWORK
HANDLE CP FOR STEEL ALMIRAH
CHROME PLATED HANDLE FOR STEEL ALMIRAH 130 MM LONG MAKE -LINK,HARRISON,GODREJ, EBCO, HETTICH OR ISI MARKED
HANDREST FOR CHAIR CB STEEL WITH ARMS FD 75M
TEAK WOOD HANDREST FOR CHAIR CB STEEL WITH ARMS FD 75M MAKE -AMKO, BRITE, HORMANY, CELLO
HIGH PRESSURE HDPE FLOAT VALVE 15MM
PVC FLOAT VALVE 15MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET OR ISI
HIGH PRESSURE HDPE FLOAT VALVE 20MM
PVC FLOAT VALVE 20MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET OR ISI
HIGH PRESSURE HDPE FLOAT VALVE 25MM
PVC FLOAT VALVE 25MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET OR ISI
LOCKING SYSTEM FOR STEEL ALMIRAH
LOCKING SYSTEM FOR STEEL ALMIRAH 130 MM LONG MAKE -LINK,HARRISON,GODREJ, EBCO, HETTICH OR ISI MARKED OR AS PER SAMPLE
M SEAL
M SEAL IN 1 KG PACK ,MAKE -PIDILITE,3M,FEVICOL
ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD
PVC ONE PIECE SEAT SHALL BE MADE OF PPCP MATERIAL HAVING NOT LESS THAN 4MM THICKNESS AND WEIGHT NOT LESS THAN 2800 GMS THE SEAT SHALL BE IN RED OR BLUE COLOUR WITH ARRANGEMENT OF FIXING ON CHAIR WITH WOODEN SCREWS MAKE - CELLO,AMKO,BLOWPLAST,HARMONY,BRITE
PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX12MM
PRELAMINATED PARTICLE BOARD BSL IN SIZE 8FTX4FTX12MM SHALL BE OF HIGH QUALITY.MAKE-KITPLY,GREENPLY,CENTURYPLY,DECCAN,NATIONAL
PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX19MM
PRELAMINATED PARTICLE BOARD BSL IN SIZE 8FTX4FTX19MM SHALL BE OF HIGH QUALITY.MAKE-KITPLY,GREENPLY,CENTURYPLY,DECCAN,NATIONAL
PVC CAPING CASING 25MM WIDE 6.5 FT LONG
PVC CAPING CASING OF WIDTH 25MM WIDE 6.5 FEET LONG
PVC SEAT AND BACK FOR CHAIR VERANDAH
SIZE OF SEAT AND BACK SHALL BE 455MMX455MM.THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 1.85 KGS.THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY
PVC SEAT CHAIR DINING
SIZE OF SEAT SHALL BE 410MMX395MM .THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 0.50 KGS.THE PVC SEAT SHALL HAVE 4X10MM THICK RIBS MOULDED ALONG WITH SEAT IN SINGLE PIECE. THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES. MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY
PVC SHOE FOR CHAIR VERANDAH
PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC HAVING INTERNAL DIA NOT LESS THAN 20MM AND HIGH NOT LESS THAN 30MM,THE SHOE SHALL HAVE PROVISION OF HOLE AT CENTER FOR FIXING TO LEG
PVC SHOE FOR CHAIR WOODEN
PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC HAVING DIA NOT LESS THAN 25MM AND HIGH NOT LESS THAN 6MM,THE SHOE SHALL HAVE PROVISION OF HOLE AT CENTER FOR FIXING TO LEG
PVC SHOE FOR TABLE BEDSIDE MAP
PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC FOR MS PIPE SIZE 18MMX18MM AND HIGH NOT LESS THAN 25MM
SEAT AND BACK FOR CHAIR CB STEEL WITH ARM
SIZE OF SEAT AND BACK SHALL BE 495MMX495MMX25MM .THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD,THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0.4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER .THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE.THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN .THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH. MAKE-AMKO,CELLO,BRITE,HARMONY.SWATI
SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM
SIZE OF SEAT AND BACK SHALL BE 445MMX445MMX25MM .THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD ,THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0.4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER .THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE.THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN .THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH.MAKE-AMKO,CELLO,BRITE,HARMONY.SWATI
SWITCH SOCKET COMBINATION 2 HOLES 06 AMP,NON MODULAR
THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 6 AMP WITH 2 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC
SWITCH SOCKET COMBINATION 2 HOLES 16 AMP,NON MODULAR
THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 16 AMP WITH 2 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC
TELESCOPIC CHANNEL 12 INCH LONG
SS TELESCOPIC CHANNEL 12 INCH LONG,MAKE-PRAYAG,HARRISON,LINK,EBCO,HETTICH
TOUCH WOOD POLISH FOR WOOD
TOUCH WOOD POLISH FOR WOOD HIGH QULAITY ,MAKE-ASIAN,BERGER,NEROLAC
WHITE CEMENT
WHITE CEMENT IN 1 KG BAG
WIREMESH STAINLESS STEEL GRADE SS 304, WOVEN FROM 0.56 MM DIA STAINLESS STEEL WIRE
STAINLESS STEEL WIREMESH MADE OF 0.56MM DIA WIRE ROLL SIZE 15MTRX .90 MTR OF SS 304 GRADE MAKE -SUPREME,AK,JJL,SH OR AS PER IS
GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR
GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR HOT DIP GALVANISED AS PER IS 4827 MAKE -SUPREME,AK,JJL,SH OR AS PER IS 4826
| Item # | Title | Description | Quantity | Unit | Consignee | Delivery (Days) | Price Trends |
|---|---|---|---|---|---|---|---|
| 1 | ALDROP BOLT ALUM 250MM ROD DIA 16MM IS 208-1996 | ALDROP BOLT ALUMINIUM 250MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 11 | nos | bso_s | 30 | |
| 2 | ALDROP BOLT ALUM 300MM ROD DIA 16MM IS 208-1996 | ALDROP BOLT ALUMINIUM 300MM WITH ROUND NUCKLE 16MM ROD DIA MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 25 | nos | bso_s | 30 | |
| 3 | ANGLE HOLDER POLYCARBONATE WITH METAL RING | THE ANGLE HOLDER SHALL BE OF POLYCARBONATE WITH METAL RING FOR B22 BULB MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC | 39 | nos | bso_s | 30 | |
| 4 | BRASS COAT HOOK | BRASS COAT HOOK SHALL BE OF S TYPE MAKE - PRAYAG, CORONET, HARRISON, LINK, AND EBCO. | 14 | nos | bso_s | 30 | |
| 5 | BUTT HINGES 100 MM SS 202 GRADE STEEL | STAINLESS STEEL BUTT HINGE OF SS 202 GRADE 100MM LONG ,MAKE- PRAYAG,CLASSIC,GLOBAL,HARRISON,LINK | 13 | nos | bso_s | 30 | |
| 6 | BUTT HINGES 75 MM SS 202 GRADE STEEL | STAINLESS STEEL BUTT HINGE OF SS 202 GRADE 75MM LONG ,MAKE- PRAYAG,CLASSIC,GLOBAL,HARRISON,LINK | 13 | nos | bso_s | 30 | |
| 7 | CANE PLASTIC HALF ROUND 2MM WIDE | PLASTIC CANE SHALL BE HALF ROUND GOLA TYPE 4MM THICK MADE OF VIRGIN PLASTIC | 5 | kg | bso_s | 30 | |
| 8 | CANE PLASTIC HALF ROUND 4MM WIDE | PLASTIC CANE SHALL BE HALF ROUND GOLA TYPE 4MM THICK MADE OF VIRGIN PLASTIC | 4 | kg | bso_s | 30 | |
| 9 | DOOR STOPPER DOUBLE LEG SS 100MM | DOOR STOPPER DOUBLE LEG SS 100MM MAKE - CROWN,CLASSIC,GLOBAL,HINDALCO,VEDANTA | 40 | nos | bso_s | 30 | |
| 10 | DOOR STOPPER SINGLE LEG SS 125MM | DOOR STOPPER SINGLE LEG SS 125MM MAKE - CROWN,CLASSIC,GLOBAL ,HINDALCO,VEDANTA | 89 | nos | bso_s | 30 | |
| 11 | ELECTRIC CEILING ROSE JUMBO 2 PLATE | ELECTRIC CEILING ROSE SHALL BE 2 PLATES JUMBO TYPE MADE OF POLYCARBONATE MATERAIL .MAKE-ANCHOR,KINJAL,HAVELLS,LEGRAND,PANASONIC | 53 | nos | bso_s | 30 | |
| 12 | FEVICOL | FEVICOL SHALL BE OF SH GRADE ,MAKE-PIDILITE,WOODWORK | 34 | kgs | bso_s | 30 | |
| 13 | HANDLE CP FOR STEEL ALMIRAH | CHROME PLATED HANDLE FOR STEEL ALMIRAH 130 MM LONG MAKE -LINK,HARRISON,GODREJ, EBCO, HETTICH OR ISI MARKED | 36 | nos | bso_s | 30 | |
| 14 | HANDREST FOR CHAIR CB STEEL WITH ARMS FD 75M | TEAK WOOD HANDREST FOR CHAIR CB STEEL WITH ARMS FD 75M MAKE -AMKO, BRITE, HORMANY, CELLO | 36 | nos | bso_s | 30 | |
| 15 | HIGH PRESSURE HDPE FLOAT VALVE 15MM | PVC FLOAT VALVE 15MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET OR ISI | 46 | nos | bso_s | 30 | |
| 16 | HIGH PRESSURE HDPE FLOAT VALVE 20MM | PVC FLOAT VALVE 20MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET OR ISI | 56 | nos | bso_s | 30 | |
| 17 | HIGH PRESSURE HDPE FLOAT VALVE 25MM | PVC FLOAT VALVE 25MM WITH HDPE BALL AND ROD MAKE -PLASTO, PRAYAG, SPARSH,SHAKTI,POLYTUF,PRIMA,JAINKO,CORONET OR ISI | 18 | nos | bso_s | 30 | |
| 18 | LOCKING SYSTEM FOR STEEL ALMIRAH | LOCKING SYSTEM FOR STEEL ALMIRAH 130 MM LONG MAKE -LINK,HARRISON,GODREJ, EBCO, HETTICH OR ISI MARKED OR AS PER SAMPLE | 28 | nos | bso_s | 30 | |
| 19 | M SEAL | M SEAL IN 1 KG PACK ,MAKE -PIDILITE,3M,FEVICOL | 4 | kgs | bso_s | 30 | |
| 20 | ONE PIECE PVC SEAT FOR CHAIR SCHOOL WITH HAND BOARD | PVC ONE PIECE SEAT SHALL BE MADE OF PPCP MATERIAL HAVING NOT LESS THAN 4MM THICKNESS AND WEIGHT NOT LESS THAN 2800 GMS THE SEAT SHALL BE IN RED OR BLUE COLOUR WITH ARRANGEMENT OF FIXING ON CHAIR WITH WOODEN SCREWS MAKE - CELLO,AMKO,BLOWPLAST,HARMONY,BRITE | 55 | nos | bso_s | 30 | |
| 21 | PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX12MM | PRELAMINATED PARTICLE BOARD BSL IN SIZE 8FTX4FTX12MM SHALL BE OF HIGH QUALITY.MAKE-KITPLY,GREENPLY,CENTURYPLY,DECCAN,NATIONAL | 16 | nos | bso_s | 30 | |
| 22 | PRELAMINATED PARTICLE BOARD BSL 8FTX4FTX19MM | PRELAMINATED PARTICLE BOARD BSL IN SIZE 8FTX4FTX19MM SHALL BE OF HIGH QUALITY.MAKE-KITPLY,GREENPLY,CENTURYPLY,DECCAN,NATIONAL | 62 | nos | bso_s | 30 | |
| 23 | PVC CAPING CASING 25MM WIDE 6.5 FT LONG | PVC CAPING CASING OF WIDTH 25MM WIDE 6.5 FEET LONG | 62 | nos | bso_s | 30 | |
| 24 | PVC SEAT AND BACK FOR CHAIR VERANDAH | SIZE OF SEAT AND BACK SHALL BE 455MMX455MM.THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 1.85 KGS.THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY | 20 | nos | bso_s | 30 | |
| 25 | PVC SEAT CHAIR DINING | SIZE OF SEAT SHALL BE 410MMX395MM .THE PVC SEAT SHALL BE 4MM THICK, MADE OF PPCP MATERIAL AND WEIGHT NOT LESS THAN 0.50 KGS.THE PVC SEAT SHALL HAVE 4X10MM THICK RIBS MOULDED ALONG WITH SEAT IN SINGLE PIECE. THE SEAT SHALL BE IN OFF WHITE COLOUR WITH PERFORATED HOLES. MAKE - AMKO,CELLO,SWATI,BRITE,HARMONY | 59 | nos | bso_s | 30 | |
| 26 | PVC SHOE FOR CHAIR VERANDAH | PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC HAVING INTERNAL DIA NOT LESS THAN 20MM AND HIGH NOT LESS THAN 30MM,THE SHOE SHALL HAVE PROVISION OF HOLE AT CENTER FOR FIXING TO LEG | 42 | nos | bso_s | 30 | |
| 27 | PVC SHOE FOR CHAIR WOODEN | PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC HAVING DIA NOT LESS THAN 25MM AND HIGH NOT LESS THAN 6MM,THE SHOE SHALL HAVE PROVISION OF HOLE AT CENTER FOR FIXING TO LEG | 195 | nos | bso_s | 30 | |
| 28 | PVC SHOE FOR TABLE BEDSIDE MAP | PVC SHOE SHALL BE MADE OF VIRGIN HARD PLASTIC FOR MS PIPE SIZE 18MMX18MM AND HIGH NOT LESS THAN 25MM | 19 | nos | bso_s | 30 | |
| 29 | SEAT AND BACK FOR CHAIR CB STEEL WITH ARM | SIZE OF SEAT AND BACK SHALL BE 495MMX495MMX25MM .THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD,THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0.4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER .THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE.THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN .THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH. MAKE-AMKO,CELLO,BRITE,HARMONY.SWATI | 31 | nos | bso_s | 30 | |
| 30 | SEAT AND BACK FOR CHAIR CB STEEL WITHOUT ARM | SIZE OF SEAT AND BACK SHALL BE 445MMX445MMX25MM .THE FRAME OF THE CHAIR SHALL BE MADE OF TEAK WOOD OR SHEESHAM WOOD ,THE FRAME SHALL BE WEAVED WITH 2MM WIDE AND 0.4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE WEIGHING NOT LESS THAN 6GMS PER 10 RUNNING METER .THE BORDER OF SEAT AND BACK SHALL BE WEAVED WITH 4MM THICK HALF ROUND GOLA TYPE PLASTIC CANE.THE WEAVING SHALL BE DONE IN TRUE GODREJ PATTERN .THE FRAME SHALL BE POLISHED IN NATURAL SHADE WITH HIGH GLOSS FINISH.MAKE-AMKO,CELLO,BRITE,HARMONY.SWATI | 28 | nos | bso_s | 30 | |
| 31 | SWITCH SOCKET COMBINATION 2 HOLES 06 AMP,NON MODULAR | THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 6 AMP WITH 2 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC | 197 | nos | bso_s | 30 | |
| 32 | SWITCH SOCKET COMBINATION 2 HOLES 16 AMP,NON MODULAR | THE SWITCH SOCKET COMBINATION SHALL BE OF POLYCARBONATE 16 AMP WITH 2 FIXING HOLES NON MODULAR TYPE MAKE - ANCHOR,HAVELLS,KINJAL,LEGRAND,PANASONIC | 23 | nos | bso_s | 30 | |
| 33 | TELESCOPIC CHANNEL 12 INCH LONG | SS TELESCOPIC CHANNEL 12 INCH LONG,MAKE-PRAYAG,HARRISON,LINK,EBCO,HETTICH | 24 | nos | bso_s | 30 | |
| 34 | TOUCH WOOD POLISH FOR WOOD | TOUCH WOOD POLISH FOR WOOD HIGH QULAITY ,MAKE-ASIAN,BERGER,NEROLAC | 15 | ltr | bso_s | 30 | |
| 35 | WHITE CEMENT | WHITE CEMENT IN 1 KG BAG | 8 | kgs | bso_s | 30 | |
| 36 | WIREMESH STAINLESS STEEL GRADE SS 304, WOVEN FROM 0.56 MM DIA STAINLESS STEEL WIRE | STAINLESS STEEL WIREMESH MADE OF 0.56MM DIA WIRE ROLL SIZE 15MTRX .90 MTR OF SS 304 GRADE MAKE -SUPREME,AK,JJL,SH OR AS PER IS | 131 | kgs | bso_s | 30 | |
| 37 | GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR | GI WIREMESH 0.40MM DIA WIRE ROLL SIZE 15MTRX .90 MTR HOT DIP GALVANISED AS PER IS 4827 MAKE -SUPREME,AK,JJL,SH OR AS PER IS 4826 | 177 | kgs | bso_s | 30 |
Categories
54
🤖 AI-Powered Bidder Prediction
Discover companies most likely to bid on this tender
Required Documents
Experience Criteria
Past Performance
Bidder Turnover
Certificate (Requested in ATC)
OEM Authorization Certificate
OEM Annual Turnover
Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria
the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer